D13354-000

July 26, 2012 25.0 [0.98"] MAX øC MAX øA THREAD TYP øB MAX TYP O RING - SILICONE TYP DATE: REV: D CUSTOMER DRAWING STRAIGHT ADAPTOR -00 1 3 4 D MAX 2 F MAX G MAX E X A M 45º ADAPTOR 90º ADAPTOR -90 -45        2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS, PLAIN CLAMPING NUT TE Connectivity 300 Constitution Drive Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: CRJ DATE: MAR 00 REVISED PER DOCUMENT NO. HEX40-AY-YY-YY-AYY-1-Y FILE: hex40_ay_yy_yy_ayy_1_y.doc: 06090 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: NONE SHEET: 1 OF 3 DATE: REV: D CUSTOMER DRAWING July 26, 2012 KIT DESCRIPTION ITEM 1 2 3 4 DESCRIPTION BODY ASSEMBLY CLAMPING NUT - PLAIN CONIC RING STAR MATERIAL ALUMINIUM ALLOY ALUMINIUM ALLOY ALUMINIUM ALLOY ALUMINIUM ALLOY TABLE OF DIMENSIONS Order Number Shell Size ØA Thread Class 6H ØB Max ØC Max D Max E Max F Max G Max 19.0 [0.75”] 22.0 [0.87] 25.5 [1.00”] 30.5 [1.20”] 33.5 [1.32”] 37.0 [1.46”] 38.5 [1.52”] 42.0 [1.65”] 46.5 [1.83”] 17.5 [0.69”] 21.5 [0.85”] 22.5 [0.89”] 25.5 [1.00”] 28.5 [1.12”] 31.5 [1.24”] 35.0 [1.38”] 38.0 [1.50”] 41.0 [1.61”] 14.4 [.57] 35.5 [.59] 40.0 [.63] 14.5 [.65] 15.0 [.67] 15.5 [.69] 16.5 [.73] 17.0 [.75] 18.0 [.79] 25.5 [1.00”] 26.0 [1.02”] 26.5 [1.04”] 27.5 [1.08”] 28.0 [1.10”] 28.5 [1.12”] 29.0 [1.14”] 30.0 [1.18”] 31.0 [1.22”] 17.9 [.71] 40.0 [.77] 45.0 [.83] 20.5 [.89] 22.0 [.95] 23.5 [1.01] 25.5 [1.08] 27.0 [1.14] 28.5 [1.20] 29.0 [1.14”] 30.5 [1.20”] 32.0 [1.26”] 33.5 [1.32”] 35.0 [1.38”] 36.5 [1.44”] 38.5 [1.52”] 40.0 [1.57”] 41.5 [1.63”] 09 Mil. A Com. 09 M12 x 1 11 B 11 M15 x 1 13 C 13 M18 x 1 15 D 15 M22 x 1 17 E 17 M25 x 1 19 F 19 M28 x 1 21 G 21 M31 x 1 23 H 23 M34 x 1 25 J 25 M37 x 1 Ferrule Quantity Std. Opt. 1 2 - 3 - 5 - 6 7 7 - 9 11 10 13 12 17 PART NUMBERING -CONNECTOR CODE NUMBER: HEX40 = MIL-C-38999 SERIES III AND IV -MATERIAL CODE: A = ALUMINIUM ALLOY -PLATING CODE: B = CADMIUM OLIVE DRAB TO QQ-P416 C = ELECTROLESS NICKEL TO MIL-C-26074 -BODY STYLE: 00 = STRAIGHT 45 = 45° 90 = 90° -ORDER NUMBER -FERRULE QUANTITY CODE -1 = PLAIN CLAMPING NUT -DS = DRILLED STAR - OPTIONAL - SEE NOTE 2 -U = FLUOROSILICONE O-RING - OPTIONAL 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS, PLAIN CLAMPING NUT TE Connectivity 300 Constitution Drive Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: CRJ DATE: MAR 00 REVISED PER DOCUMENT NO. HEX40-AY-YY-YY-AYY-1-Y FILE: hex40_ay_yy_yy_ayy_1_y.doc: 06090 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: NONE SHEET: 2 OF 3 DATE: REV: D CUSTOMER DRAWING July 26, 2012 APPLICATION - These adaptors are designed to be mounted on the following connectors: MIL-C-38999 Series III and IV - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink moulded parts where strain relief is required – see illustration. MOULDED PART - Use in conjunction with the ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX S.C.D. for relevant selection details. INSTALLATION - See Installation Procedure RPIP-696-04. PACKAGING - All components are supplied in a plastic bag. øF MAX NOTES! 1. Item 4 - Star - is not supplied with Hexashield Order Number 09. 2. The DS option, illustrated below, is for a Drilled Star that is available on sizes 15 to 25 only. This option is to allow unshielded wires to pass through the assembly. STAR SIZE ØD MAX 15 3.0 [0.12”] 17 6.0 [0.24”] 19 9.0 [0.35”] 21 12.0 [0.47”] 23 15.0 [0.59”] 25 18.0 [0.71”] 3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard. If the optional quantity is selected then 2 items 4 will be supplied - one “split” and the other one standard. See below for illustration. EXAMPLE: FERRULE QUANTITY CODE -A13 -A13 = -A10 SPLIT STAR + -A3 STANDARD STAR 4. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX40-AB-00-21-A9-1)  2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS, PLAIN CLAMPING NUT TE Connectivity 300 Constitution Drive Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: CRJ DATE: MAR 00 REVISED PER DOCUMENT NO. HEX40-AY-YY-YY-AYY-1-Y FILE: hex40_ay_yy_yy_ayy_1_y.doc: 06090 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: NONE SHEET: 3 OF 3