D3213

Signal Relays AXICOM FX2 Relay n Slim line 15x7.3mm (.590x.287”) form C bifurcated contacts (2 CO), switching current 2A n High sensitivity for low power consumption, 80mW/140mW n High dielectric characteristic, up to 2100Vrms between open contact n High surge capability (1.2/50μs and 10/700μs) meets Telcordia GR 1089 and FCC Part 68, up to 2900V between open contacts, up to 6000V between coil and contacts n High mechanical shock, up to 1500g survival n Hermetically sealed (RT V) n 2 Typical applications Communications equipment, linecard application - analog, ISDN, xDSL, PABX, voice over IP, office and business equipment, measurement and control equipment, consumer electronics, set top boxes, HiFi, medical equipment Approvals UL 508 File No. E 111441 Technical data of approved types on request Contact Data Contact arrangement Max. switching voltage Rated current Limiting continuous current Switching power Contact material Contact style Min. recommended contact load Initial contact resistance Thermoelectric potential Operate time Release time without diode in parallel with diode in parallel Set/reset time min. Bounce time max. Electrical endurance at contact application 0 (≤ 30mV / ≤ 10mA) cable load open end resistive, 24V / 1.25A - 30W resistive, 30VDC / 2A - 60W resistive, 125VDC / 0.24A - 30W UL contact rating Mechanical endurance 2 form C (CO) 220VDC, 250VAC 2A 2A 60W, 62.5VA PdRu, Au covered bifurcated contacts 100µV/1µA