D369-P33-NP1

D369-P33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, Mating Retention, Crimp, DEUTSCH 369 D369-P33-NP1  ACTIVE DEUTSCH | DEUTSCH 369 TE Internal #: D369-P33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, Mating Retention, Crimp, DEUTSCH 369 View on TE.com > Connectors > Rectangular Connectors > Standard Rectangular Connectors > Rectangular Connectors: 3-Way Plug Connector Product Type: Connector Assembly Connector & Housing Type: Plug Mating Alignment: With Mating Alignment Type: Keyed Mating Retention: With All Rectangular Connectors: 3-Way Plug (24) Features Product Type Features Connector Seal & Plug Type Triple-Seal Connector Shell Size 03 Connector Product Type Connector Assembly Connector & Housing Type Plug Connector System Wire-to-Wire Insertion Force Type Normal Sealable Yes Connector & Contact Terminates To Wire & Cable Configuration Features  Number of Cavities 3 Contacts Preloaded Yes Number of Power Positions 3 Number of Columns 3 Number of Signal Positions 3 Number of Positions 3 Number of Rows 1 Electrical Characteristics For support call+1 800 522 6752 01/03/2024 12:03AM | Page 1 D369-P33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, Mating Retention, Crimp, DEUTSCH 369 Electrical Characteristics Operating Voltage 400 VAC Body Features Connector Seal Color Natural Seal Type Grommet Seal, Interfacial Seal Cable Exit Angle 180° Seal Material Fluorosilicone Connector & Keying Code N Contact Features Contact Size Size 22 Contact Type Pin Wire Contact Termination Area Plating Material Gold Contact Mating Area Plating Material Gold Contact Retention Within Housing With Contact Current Rating (Max) 5A Termination Features Termination Method to Wire & Cable Crimp Mechanical Attachment Strain Relief Without Mating Alignment With Mating Alignment Type Keyed Mating Retention With Mating Retention Type Button Latch Housing Features Shell Material Composite Housing Material Composite Housing Color Black Centerline (Pitch) 2.54 mm[.1 in] Dimensions Row-to-Row Spacing 2.54 mm[.1 in] Compatible Insulation Diameter Range .71 – 1.37 mm[.028 – .054 in] Usage Conditions  Operating Temperature Range For support call+1 800 522 6752 -55 – 175 °C[-67 – 347 °F] 01/03/2024 12:03AM | Page 2 D369-P33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, Mating Retention, Crimp, DEUTSCH 369 Operating Temperature Range -55 – 175 °C[-67 – 347 °F] Operation/Application Shielded No Circuit Application Power & Signal Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant with Exemptions EU ELV Directive 2000/53/EC Compliant with Exemptions China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Candidate List Declared Against: JAN 2023 (233) SVHC > Threshold: Pb (1.2% in In alloy) Article Safe Usage Statements: Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Recycle if possible and dispose of the article by following all applicable governmental regulations relevant to your geographic location. Halogen Content Low Halogen - Br, Cl, F, I < 900 ppm per homogenous material. Also BFR/CFR/PVC Free Solder Process Capability Not reviewed for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-onreach Compatible Parts  For support call+1 800 522 6752 01/03/2024 12:03AM | Page 3 D369-P33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, Mating Retention, Crimp, DEUTSCH 369 TE Part # D369-R33-NS1 TE Part # CAT-D369-B33 TE Part # YD369-B33-NS1-119P TE Part # YD369-B33-NS4-119P 369 3 WAY REC, CRIMP, SKT Rectangular Connectors: 3-Way Panel Mount , 90PCB 369 3 WAY PANEL MNT REC, CRIMP, SKT,119P 369 3 WAY PANEL MNT REC, 90 PCB SKT 119P Also in the Series DEUTSCH 369 PCB Headers & Receptacles(60) Standard Rectangular Connectors(425) Customers Also Bought  TE Part #D369-P33-NS1 TE Part #D369-P99-NP1 TE Part #D369-R99-NP1 TE Part #1617086-6 369 3 WAY PLUG, CRIMP, SKT 369 9 WAY PLUG, CRIMP, PIN 369 9 WAY REC, CRIMP, PIN 3SBM1071A2 = M39016/31-003M TE Part #CJ8360-000 TE Part #1-2176377-5 TE Part #D369-STB-3 TE Part #D369-STB-6 S200-2-W2-22-9 RQ 0805 187K 0.1% 10PPM 1K RL 369 3 WAY BACKSHELL STRAIGHT TIE WRAP 369 6 WAY BACKSHELL STRAIGHT TIE WRAP TE Part #ZPF000000000203317 TE Part #Y79003-14-19PNV004 DMC-MD 80 B 01-01 HERM RECP Documents For support call+1 800 522 6752 01/03/2024 12:03AM | Page 4 D369-P33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, Mating Retention, Crimp, DEUTSCH 369 Documents Product Drawings 369 3 WAY PLUG, CRIMP, PIN English CAD Files 3D PDF 3D Customer View Model ENG_CVM_CVM_D369-P33-NP1_99_c-d369-p33-np1-99.2d_dxf.zip English Customer View Model ENG_CVM_CVM_D369-P33-NP1_99_c-d369-p33-np1-99.3d_igs.zip English Customer View Model ENG_CVM_CVM_D369-P33-NP1_99_c-d369-p33-np1-99.3d_stp.zip English By downloading the CAD file I accept and agree to the Terms and Conditions of use.  For support call+1 800 522 6752 01/03/2024 12:03AM | Page 5