D369-R66-AP0

369 Series Connectors TE Connectivity 369 Series Connectors KEY FEATURES Introduction • 3, 6 and 9 way configurations TE Deutsch 369 series connectors has been developed to provide a range • Based on existing ARINC 809 / EN4165 of high reliability, lightweight, compact and cost efficient connectors suited • Composite materials to aerospace and other harsh environment applications. The product is • Robust design particularly suited to civil aerospace cabin systems applications and is • Fully sealed cable and mating interface • Mounting of inline with cable-tie based on the successful Deutsch ARINC 809/EN4165 single module connector. The 369 series is designed for applications where fewer contacts are needed in each connector and shielding is unnecessary. • Button latching mechanism Connectors are available with • Color-coded keyed shells 3, 6, and 9 contacts. Installation • Scoop-proof interface and maintenance of cabling • Military standard AS39029 contacts is quick and easy with a range • Latch security feature BENEFITS of individually color-coded keying options. Furthermore, each mated half of the connector can be configured • Suitable for broad range of applications with either male or female • High reliability in aerospace environment contacts, doubling the keying configurations available and electrically •E  xtremely compact and lightweight with low smoke, toxicity and flammability protecting contacts on the powered-side of your system. •E  xcellent temperature, vibration and fluids resistance reinserted from the rear of the connector with standard tooling. The 369 •S  uitable for areas where high moisture levels are present interface preventing damage to contacts. The connectors are fully sealed • Simple quick mounting Aerospace standard AS39029 contacts can be easily extracted and is suitable for blindmating or low visibility conditions with the scoop-proof for use in areas with high levels of moisture and are manufactured from high performance composite materials which conform to the low smoke, • Quick positive and audible locking toxicity and flammability requirements of FAR 25. The 369 series is • Quick and accurate installation of cabling complemented by a range of accessories including easy-fit backshells. •P  revents damage to contacts in blind-mating conditions • Standard termination tooling and wire •C  able-tie helps prevent inadvertent un-mating TE | 369 Series TE Connectivity 369 Series Connectors Technical Characteristics MECHANICAL CHARACTERISTICS Operating temperature : -55°C to +175°C Fluid resistance : I.A.W. EN2591-315 Sealing : 12.1 kPa (1.75 psi) [ 15 km/(50,000 ft) altitude] / IP67 Vibration : EN2591-403, Method B, Level E, 8h/axis Smoke & Toxicity : I.A.W. FAR 25.853, Appendix F Flammability : I.A.W. FAR25.853 Appendix F; EN2591-317 Durability : 500 mating cycles Shock : EN2591-402, Method A, severity 100 MATERIAL CHARACTERISTICS Shells, Insulators and backshells : High performance thermoplastic Contacts : Copper alloy, gold plated Seals : Fluorosilicone rubber Designed to meet the requirements of RoHS ELECTRICAL CHARACTERISTICS Dielectric withstanding voltage : 1300 Vrms mated,