D94815-000

RAYCHEM Tubing Products 1 SCL Heat-shrinkable Tubing Semirigid, Encapsulant-Lined, Polyolefin Tubing Product Facts 3:1 shrink ratio Splash-resistant, moistureresistant covering; not intended for use where immersion in fluids is required ■ Rugged protection against abrasion, vibration, and flexing ■ Excellent strain relief and insulation of weak points ■ RoHS compliant ■ ■ Applications Installation Operating Temperature Range Encapsulates components, splices, and terminations where moisture resistance and mechanical protection are required. Encapsulant melts and flows to fill surface irregularities of the substrate. While still hot, the tubing can be blocked to form a wire breakout. Minimum shrink temperature: 125°C [257°F] -55°C to 110°C [-67°F to 230°F] Minimum full recovery temperature: 135°C [275°F] Specifications/Approvals Series UL Military Raychem SCL E85381 600 V, 125°C AMS-DTL-23053/4*, Class 1 RT-1301 *Formerly MIL-I-23053/4 and MIL-DTL-23053/4. Available in: Americas Europe Asia Pacific ■ ■ ■ 1-109 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666 RAYCHEM Tubing Products SCL (Continued) Product Dimensions Size Additional Standard Color 1/8 3/16 1/4 3/8 1/2 3/4 1 Brown Gray White Red Blue Yellow N/A Inside Diameter Minimum Maximum Expanded Recovered After Heating as Supplied 3.2 [0.125] 0.6 [0.023] 4.8 [0.187] 1.5 [0.060] 6.4 [0.250] 2.0 [0.080] 9.5 [0.375] 3.4 [0.135] 12.7 [0.500] 5.0 [0.195] 19.1 [0.750] 8.0 [0.313] 25.4 [1.000] 10.2 [0.400] Recovered Wall Thickness** Meltable Wall Total Wall After Heating After Heating (Nominal) 0.96 ± 0.15 [0.038 ± 0.006] 0.51 [0.020] 1.09 ± 0.15 [0.043 ± 0.006] 0.64 [0.025] 1.19 ± 0.15 [0.047 ± 0.006] 0.69 [0.027] 1.27 ± 0.18 [0.050 ± 0.007] 0.76 [0.030] 1.39 ± 0.18 [0.055 ± 0.007] 0.89 [0.035] 1.65 ± 0.18 [0.065 ± 0.007] 1.02 [0.040] 1.90 ± 0.18 [0.075 ± 0.007] 1.02 [0.040] **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) for all sizes, plus one additional color per size per Product Dimensions table. Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging In 1.2-meter [4-foot] lengths. Ordering description*** Specify product name, size and color (for example, SCL 1/4-0). ***Europe only. For supply to MIL spec., Def Stan and BS add -MS, -DS or -BS to ordering description. 1-110 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666