DT06-12SA-CE04

CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Date Issued to: This is to certify that representative samples of UL-US-2230522-1 E28476-20090527 29-Mar-2023 TYCO Electronics Corp 2901 Fulling Mill Rd Middletown, PA 17057 United States ECBT2 - Connectors for Use in Data, Signal, Control and Power Applications - Component See Addendum Page for Product Designation(s). UL-US-2230522-1 Have been evaluated by UL in accordance with the component requirements in the Standard(s) indicated on this Certificate. UL Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for installation in complete equipment submitted for investigation to UL LLC. Standard(s) for Safety: UL 1977, Edition 4, Issue Date 2022-12-07 Additional Information: See the UL Online Certifications Directory at https://iq.ulprospector.com for additional information E28476-20090527 This Certificate of Compliance indicates that representative samples of the product described in the certification report have met the requirements for UL certification. It does not provide authorization to apply the UL Recognized Component Mark. Only the Authorization Page that references the Follow-Up Services Procedure for ongoing surveillance provides authorization to apply the UL Mark. Only those products bearing the UL Recognized Component Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services. Look for the UL Recognized Component Mark on the product. Deborah Jennings-Conner, VP Regulatory Services UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Date UL-US-2230522-1 E28476-20090527 29-Mar-2023 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements Model 1-2303812-1 1-2303812-2 1-2303812-3 1-2303812-4 1-2303813-1 1-2303813-2 1-2303813-3 1-2303813-4 1-2303815-1 1-2303815-2 1-2303815-3 1-2303815-4 1-2303816-1 1-2303816-2 1-2303816-3 1-2303816-4 1-2322907-1 1-2322907-2 2-2303812-1 2-2303812-2 2-2303812-3 2-2303812-4 2-2303813-1 2-2303813-2 2-2303813-3 2-2303813-4 2-2303815-1 2-2303815-2 2-2303815-3 2-2303815-4 2-2303816-1 2-2303816-2 2-2303816-3 2-2303816-4 2-2322907-2 2298173-1 2298173-2 2298173-3 2298173-4 Category Description Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Deborah Jennings-Conner, VP Regulatory Services UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Date UL-US-2230522-1 E28476-20090527 29-Mar-2023 2303454-1 2323768-1 2323768-2 2323768-3 2323768-4 2332444-1 2332444-2 2375997-1 2375997-2 2375997-3 2375997-4 20090527, Model Series DT Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Deborah Jennings-Conner, VP Regulatory Services UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Date Issued to: This is to certify that representative samples of UL-CA-2215593-3 E28476-20090527 29-Mar-2023 TYCO Electronics Corp 2901 Fulling Mill Rd Middletown, PA 17057 United States ECBT8 - Connectors for Use in Data, Signal, Control and Power Applications Certified for Canada - Component See Addendum Page for Product Designation(s). UL-CA-2215593-3 Have been evaluated by UL in accordance with the component requirements in the Standard(s) indicated on this Certificate. UL Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for installation in complete equipment submitted for investigation to UL LLC. Standard(s) for Safety: CSA C22.2 No. 182.3, 2nd Ed., Issue Date: 2016-07, Revision Date: 2021-5 Additional Information: See the UL Online Certifications Directory at https://iq.ulprospector.com for additional information E28476-20090527 This Certificate of Compliance indicates that representative samples of the product described in the certification report have met the requirements for UL certification. It does not provide authorization to apply the UL Recognized Component Mark. Only the Authorization Page that references the Follow-Up Services Procedure for ongoing surveillance provides authorization to apply the UL Mark. Only those products bearing the UL Recognized Component Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services. Look for the UL Recognized Component Mark on the product. Deborah Jennings-Conner, VP Regulatory Services UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Date UL-CA-2215593-3 E28476-20090527 29-Mar-2023 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements Model 1-2303812-1 1-2303812-2 1-2303812-3 1-2303812-4 1-2303813-1 1-2303813-2 1-2303813-3 1-2303813-4 1-2303815-1 1-2303815-2 1-2303815-3 1-2303815-4 1-2303816-1 1-2303816-2 1-2303816-3 1-2303816-4 1-2322907-1 1-2322907-2 2-2303812-1 2-2303812-2 2-2303812-3 2-2303812-4 2-2303813-1 2-2303813-2 2-2303813-3 2-2303813-4 2-2303815-1 2-2303815-2 2-2303815-3 2-2303815-4 2-2303816-1 2-2303816-2 2-2303816-3 2-2303816-4 2-2322907-2 2298173-1 2298173-2 2298173-3 2298173-4 Category Description Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Deborah Jennings-Conner, VP Regulatory Services UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Date UL-CA-2215593-3 E28476-20090527 29-Mar-2023 2303454-1 2323768-1 2323768-2 2323768-3 2323768-4 2332444-1 2332444-2 2375997-1 2375997-2 2375997-3 2375997-4 Model Series DT, followed by 04 or 06, followed by 2, 3, 4, 6, 08, or 12, followed by S or P. May be followed by alphanumeric suffixes. Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Connectors Deborah Jennings-Conner, VP Regulatory Services UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ File E28476 Service Request: 1181364 May 27, 2009 REPORT on COMPONENT - CONNECTORS FOR USE IN DATA, SIGNAL, CONTROL AND POWER APPLICATIONS TYCO ELECTRONICS CORP MIDDLETOWN,PA Copyright © 2009 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above named company to reproduce this Report either in its entirety or the portion of this Report consisting of the Cover Page up to (but not including) the Construction Details Descriptive pages. File E28476 Vol. Vol. Vol. Vol. 124 165 166 169 Sec. 3 Sec. 1 Sec. 1 Sec. 1 and Report Page 1 Issued: Revised: 2009-05-27 2023-03-28 DESCRIPTION PRODUCT COVERED: USR, CNR - Component Connectors, Models DT, followed by 04 or 06, followed by 2, 3, 4, 6, 08, or 12, followed by S or P. May be followed by alphanumeric suffixes. USR, CNR - Component Connectors Cat. Nos. X-2298173-Y, X-2303454-Y, x2303812-y, x-2303813-y, x-2303815-y, x-2303816-y X-2322907-Y, X-2323768-Y, X2332444-Y, X-2375997-Y where x = 1, 2 and y = 1-4 GENERAL: These devices are multi-pole connectors intended for factory assembly on stranded copper conductors where the acceptability of combinations is determined by UL LLC. The devices are identified as follows: RATINGS: 250V, no current rating. Disconnecting Use - see Sec Gen for required marking. File E28476 Vol. Vol. Vol. Vol. 124 165 166 169 Sec. 3 Sec. 1 Sec. 1 Sec. 1 and Report Page 2 Issued: Revised: 2009-05-27 2023-03-28 NOMENCLATURE: DT I 04II 3 III S IV __ V - __ VI I - Designates Deutsch DT Series. II - Indicates Connector Type. 04 – Receptacle (male) 06 – Plug (female) III - Indicates Number of Contacts. 12 max. IV - Indicates Contact Type. S – Socket P – Pin V - Polarizing Position (if applicable) A, B, C, D. VI – Special Modifications. The following table lists Cat. Nos. that are identical in construction Cat. No. 1-2303812-1 1-2303812-2 1-2303812-3 1-2303812-4 2-2303812-1 2-2303812-2 2-2303812-3 2-2303812-4 1-2303813-1 1-2303813-2 1-2303813-3 1-2303813-4 2-2303813-1 2-2303813-2 2-2303813-3 2-2303813-4 1-2303815-1 1-2303815-2 1-2303815-3 Identical Construction DT04-2P-TE31 DT04-2P-TN31 DT04-2P-TN32 DT04-2P-TE32 DT04-2P-TE81 DT04-2P-TN81 DT04-2P-TN82 DT04-2P-TE82 DT04-3P-TE31 DT04-3P-TN31 DT04-3P-TN32 DT04-3P-TE32 DT04-3P-TE81 DT04-3P-TN81 DT04-3P-TN82 DT04-3P-TE82 DT06-2S-TE31 DT06-2S-TN31 DT06-2S-TN32 Identical Construction DT04-2P-CE01 DT04-2P-E003 DT04-2P-E005 DT04-2P-CE03 DT04-2P-CE04 DT04-2P-E008 DT04-2P-EE01 DT04-2P-CE09 DT04-3P-CE01 DT04-3P-E003 DT04-3P-E005 DT04-3P-CE03 DT04-3P-CE04 DT04-3P-E008 DT04-3P-EE01 DT04-3P-CE09 DT06-2S-CE01 DT06-2S-E003 DT06-2S-E005 Identical Construction DT04-2P-EP04 DT04-3P-EP04 DT06-2S-EP04 DT06-2S-EP06 File E28476 Vol. Vol. Vol. Vol. 124 165 166 169 Sec. 3 Sec. 1 Sec. 1 Sec. 1 and Report Page 2A Issued: Revised: 2009-05-27 2023-03-28 The following table lists Cat. Nos. that are identical in construction Cat. No. 1-2303815-4 2-2303815-1 2-2303815-2 2-2303815-3 2-2303815-4 1-2303816-1 1-2303816-2 1-2303816-3 1-2303816-4 2-2303816-1 2-2303816-2 2-2303816-3 2-2303816-4 2298173-1 2298173-2 2298173-3 2298173-4 2303454-1 2323768-1 2323768-2 2323768-3 2323768-4 1-2322907-1 1-2322907-2 2-2322907-2 2332444-1 2332444-2 2375997-1 2375997-2 2375997-3 2375997-4 Identical Construction DT06-2S-TE32 DT06-2S-TE81 DT06-2S-TN81 DT06-2S-TN82 DT06-2S-TE82 DT06-3S-TE31 DT06-3S-TN31 DT06-3S-TN32 DT06-3S-TE32 DT06-3S-TE81 DT06-3S-TN81 DT06-3S-TN82 DT06-3S-TE82 DT04-08PA-P089 DT04-08PB-P089 DT04-08PC-P089 DT04-08PD-P089 DT04-6P-LE14 DT04-12PA-CE04 DT04-12PB-CE04 DT04-12PC-CE04 DT04-12PD-CE04 DT04-2P-TR32-100K DT04-2P-TR31-4700 DT04-2P-TR31-750 DT04-3P-EP10-120 DT04-3P-P006-120 DT04-08PA-P093 DT04-08PB-P093 DT04-08PC-P093 DT04-08PD-P093 Identical Construction DT06-2S-CE03 DT06-2S-CE04 DT06-2S-E008 DT06-2S-EP11 DT06-2S-CE13 DT06-3S-CE01 DT06-3S-E003 DT06-3S-E005 DT06-3S-CE05 DT06-3S-CE04 DT06-3S-E008 DT06-3S-EP11 DT06-3S-CE13 Identical Construction DT06-2S-CE05 DT06-3S-EP04 DT06-3S-EP06 File E28476 Vol. Vol. Vol. Vol. 124 165 166 169 Sec. 3 Sec. 1 Sec. 1 Sec. 1 and Report Page 3 Issued: Revised: 2009-05-27 2018-05-09 TECHNICAL CONSIDERATIONS (NOT FOR FIELD REPRESENTATIVE’S USE): *Use - For use only in or with complete equipment where the acceptability of the combination is determined by UL LLC. Conditions of Acceptability - The following are among the considerations to be made when evaluating the device in the end-use product. Interruption of Current 1. These devices are not suitable for interrupting the flow of current by connecting or disconnecting the mating connector. Current-Carrying Capability and Current Ratings 2. These devices have not been subjected to the Temperature test and as a result do not have an assigned current rating. The device’s current carrying capability is to be reviewed in the end-use by measuring temperatures on the connector housing and/or terminals when current is flowing through the connector under conditions of normal use. * Insulating Materials * *3. These devices employ insulating materials with properties as tabulated below at the minimum thickness employed in the connector housing, the suitability of the insulating materials based on the documented values shall be determined in the end-use application. Please note the values specified in the table when multiple materials are indicated represent the minimum values for the group of materials. File E28476 Part Vol. Vol. Vol. Vol. Insulating Material # 124 165 166 169 Sec. 3 Sec. 1 Sec. 1 Sec. 1 and Report Manufacturer A (1) Proprietary Info RM# CR022411 Housing Weld Cap Wedge, Plug or 2136558 (+++) C (3) Proprietary Info RM# 2136889 D Proprietary Info RM# 2396943 F (3) RM# Proprietary Info 2390762-1, -2 I 2404901-1, Proprietary 2404901-2 Info Min Thickness (mm) 1.02 DSM Engineering Proprietary Info Plastics (E43392) Issued: Revised: 2009-05-27 2023-03-28 Flame Class HWI HAI RTI Elec Max Operating Temp, 0C (+) 0 (++) 0 (++) 120 (++) 120 DSM Engineering Proprietary Info Plastics (E43392) 1.02 (+) - - 65 (++) 65 Proprietary Info RTP CO (E84658) 1.02 V-0 0 0 125 125 BASF Corp Proprietary Info 1.02 V-0 0 0 65 65 1.02 (+) 0 0 65 65 120 (E36632) KINGFA SCI &Info TECH Proprietary CO LTD (E171666) DSM Engineering Proprietary Info A (2) Plastics Proprietary Info RM# CR022411 (E43392) C (3) DSM Engineering Proprietary Info Proprietary Info Plastics (E43392) RM# 2136889 F (3) RM# BASF Corp Proprietary Info Proprietary Info 2390762-1, -2 (E36632) I 2404901-1, SCI &Info TECH Proprietary KINGFA Proprietary CO LTD (E171666) 2404901-2 Info Sabic Innovative Proprietary Info B Plastics Proprietary Info RM# CR025311 (E121562) DSM Engineering Proprietary Info Proprietary E 705303-2 (2) Plastics (E43392) (+++) Info Proprietary Info Proprietary Info G 703855-5 Celanese (4) (5) International (+++) Corp, E45575 Proprietary Info DSM Proprietary Info H 705303-2 Engineering (4) (5) Materials Inc, (+++) E47960 1.3 ## 0 (++) 0 (++) 120 (++) 1.3 (+) - - 65 (++) 65 1.3 V-0 0 0 65 65 1.3 (+) 0 0 65 65 -- 4 2 130 120 -- - - 75(###) 75(###) - - 75(###) 75(###) - - 75(###) 75(###) -- 4 2 130 120 -- - - 75(###) 75(###) - - 75(###) 75(###) - - 75(###) 75(###) 0.56 0.56 0.56 0.56 Sabic Innovative Proprietary Info 0.56 Plastics (E121562) DSM Engineering Proprietary Info 0.56 Proprietary E 705303-2 (4) Plastics (E43392) (+++) Info B Proprietary Info RM# CR025311 Wedge, Receptacle Page 4 Proprietary Info Proprietary Info 0.56 G 703855-5 Celanese (4) (5) International (+++) Corp, E45575 Proprietary Info DSM H 705303-2 Engineering Proprietary Info 0.56 (4) (5) Materials Inc, (+++) E47960 (+) (+) (+) (+) Note: (1) Maximum 80% regrind; (2) Maximum 100% regrind (3) Maximum 75% Regrind (4) Maximum 40% regrind (5)Maximum 100% regrind, Orange, Grey, Black, Brown colors only (#) – Code for Insulating Body Material. (##) - No contact anywhere with the terminals so as such, no Flame testing required. (###): These materials are being used above the regrind percentage allowed by their Component Recognition. These will default to their generic RTI values. (+): Thickness is less than the minimum Recognized material thickness, as such no assigned Flame class. UL 746C 12mm Flammability test conducted. (++): These PLCs are based on the minimum Recognized material thickness. (+++): These materials will use QMQS2 Recognized Color Concentrates at the let-down ratios specified in the table below. File E28476 Material Manufacturer DSM Engineering Materials Inc, E43392 Celanese International Corp, E45575 Celanese International Corp, E45575 Celanese International Corp, E45575 DSM Engineering Materials Inc, E47960 DSM Engineering Materials Inc, E47960 DSM Engineering Materials Inc, E47960 DSM Engineering Materials Inc, E43392 A. * Vol. Vol. Vol. Vol. 124 165 166 169 Grade Designation TV4 261 T 3316 3316 3316 TV4 261 Sec. 3 Sec. 1 Sec. 1 Sec. 1 and Report Color Concentrate Manufacturer Avient Colorants USA LLC, E73454 Avient Colorants USA LLC, E73454 Avient Colorants USA LLC, E73454 Avient Colorants USA LLC, E73454 Avient ProprietaryColorants Info USA LLC, E73454 Page 4-1 Issued: Revised: 2009-05-27 2023-03-28 Concentrate Designation Colors Maximum LDR NBXXXXXXXX OR, GN 1:33.33 NBXXXXXXXX GN, BK 1:50 NBXXXXXXXX GY, BL 1:33.3 NBXXXXXXXX GN, BN, OR, BL, 1:25 NBXXXXXXXX GR, BK 1:50 TV4 261 Avient Colorants USA LLC, E73454 NBXXXXXXXX GY, BL 1:33.3 TV4 261 Avient Colorants USA LLC, E73454 NBXXXXXXXX BN, OR, BL, GN 1:25 M-2360/HS(h6) Avient Colorants USA LLC, E73454 ABXXXXXXXX, ACXXXXXXXX GY, BK, GN, BN 1:20 Proprietary Info DSM Engineering Plastics (E43392), Grade Designation: M-2360/HS TYCO Raw Material#: CR022411 or 2136558 Housing colors: Brown, Gray, Green, Black and Natural (with colorant added as shown in Table) 1. Dielectric strength (kV/mm): -2. CTI: 4 B. Proprietary Info Sabic Innovative C. Proprietary Info DSM Engineering D. Proprietary RTP CO Info (E84658), Plastics (E121562), Grade Designation: Valox420(w). TYCO Raw Material#: CR025311 1. Dielectric strength (kV/mm): 30 2. CTI: 0 Plastics (E43392), Grade Designation: S223-KGS3 TYCO Raw Material#: 2136889 Housing colors: Brown, Gray, Green, and Black 1. Dielectric strength (kV/mm): -2. CTI: -Grade Designation: RTP 299 X 150914 Proprietary Info TYCO Raw Material#: 2396943 Housing colors: Brown, Gray, Green, and Black 1. Dielectric strength (kV/mm): 10 2. CTI: 2 File E28476 Vol. Vol. Vol. Vol. 124 165 166 169 E. Proprietary Info DSM Engineering F. Proprietary Info BASF CORP G. Proprietary InfoInternational Celanese *H. Proprietary Info DSM Engineering I. Proprietary KINGFA Info SCI Sec. 3 Sec. 1 Sec. 1 Sec. 1 and Report Page 4-1A Issued: Revised: 2009-05-27 2022-07-27 Plastics (E43392), Grade Designation: ARNITE TV4 261 T(++) TYCO Raw Material#: 705303-2 Housing colors: Orange, Green 1. Dielectric strength (kV/mm): -2. CTI: -(E36632), Grade Designation: A3U10G3 (a2) TYCO Raw Material#: 2390762-1, -2 Housing colors: Black, and Gray 1. Dielectric strength (kV/mm): -2. CTI: 2 Corp (E45575), Grade Designation: 3316 TYCO Raw Material#: 703855-5 Housing colors: Grey, Black, Green, Brown, Blue, Orange 1. Dielectric strength (kV/mm): -2. CTI: -Plastics (E43392), Grade Designation: ARNITE TV4 261(++) TYCO Raw Material#: 705303-2 Housing colors: Grey, Black, Green, Brown, Blue, Orange 1. Dielectric strength (kV/mm): -2. CTI: -& TECH CO LTD (E171666), Grade Designation: PA66-RG151HI(##) TYCO Raw Material#: 2404901-1, 2404901-2 Housing colors: Black, Grey 1. Dielectric strength (kV/mm): 14.3 2. CTI: 3 File E28476 Vol. Vol. Vol. Vol. 124 165 166 169 Sec. 3 Sec. 1 Sec. 1 Sec. 1 and Report Page 4A Issued: New: 2009-05-27 2018-05-09 The following crimp contacts have been evaluated for the wire sizes as tabulated below: Stamped and Formed Type Pin/Contact Wire Size, AWG Force, lbf 1060-14-0122 / 1062-14-0122 14 - 18 20 1060-16-0122 / 1062-16-0122 14 - 18 20 Solid Type Pin/Contact Wire Size, AWG Force, lbf 0460-215-16141 / 0462-209-16141 14 20 0460-202-16141 / 0462-201-16141 16, 18 20 20 8