DTM13-12PC

DTM13-12PC PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in] Centerline, Fully Shrouded, Tin, Through Hole - Solder, Sealable, Signal DTM13-12PC  ACTIVE DEUTSCH | DEUTSCH DT, DEUTSCH DTM TE Internal #: DTM13-12PC PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in] Centerline, Fully Shrouded, Tin, Through Hole Solder, Sealable, Signal View on TE.com > Connectors > PCB Connectors > PCB Headers & Receptacles > DEUTSCH DTM Headers Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 2 Centerline (Pitch): 4.19 mm [ .165 in ] PCB Mount Orientation: Right Angle All DEUTSCH DTM Headers (36) Features Product Type Features Mixed & Hybrid Header No Connector Shape Rectangular Connector System Wire-to-Board Header Type Fully Shrouded Sealable Yes Connector & Contact Terminates To Wire & Cable PCB Connector Assembly Type PCB Mount Header Configuration Features  Number of Sections 1 Number of Signal Positions 12 Number of Positions 12 Number of Rows 2 PCB Mount Orientation Right Angle For support call+1 800 522 6752 06/29/2024 02:36PM | Page 1 DTM13-12PC PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in] Centerline, Fully Shrouded, Tin, Through Hole - Solder, Sealable, Signal PCB Mount Orientation Right Angle Electrical Characteristics Voltage Rating (Max) 250 VAC Nominal Voltage Architecture 12 V, 24 V Operating Voltage 250 VAC Body Features Connector & Keying Code C Primary Product Color Gray Contact Features Contact Size Size 20 Mating Pin Diameter 1.02 mm[.04 in] Contact Mating Area Plating Material Tin Contact Type Pin Contact Current Rating (Max) 7.5 A Termination Features Termination Method to Printed Circuit Board Through Hole - Solder Mechanical Attachment Mounting Holes With Mating Alignment Type Keyed Mating Retention With Panel Mount Feature With PCB Mount Retention Type Mounting Screw Mating Retention Type Locking Interface Connector Mounting Type Board Mount Mating Alignment With PCB Mount Alignment Without PCB Mount Retention With Housing Features Centerline (Pitch) 4.19 mm[.165 in] Dimensions  Connector Length 38.23 mm[1.505 in] Connector Width 60.96 mm[2.4 in] PCB Thickness (Recommended) .78 – 2.36 mm[.031 – .093 in] For support call+1 800 522 6752 06/29/2024 02:36PM | Page 2 DTM13-12PC PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in] Centerline, Fully Shrouded, Tin, Through Hole - Solder, Sealable, Signal PCB Thickness (Recommended) .78 – 2.36 mm[.031 – .093 in] Profile Height from PCB 35.54 mm[1.36 in] Usage Conditions Operating Temperature (Max) 125 °C[257 °F] Operating Temperature Range -55 – 125 °C[-67 – 257 °F] Operation/Application Shielded No Circuit Application Signal Industry Standards Degree of Protection Not Tested UL Rating Recognized UL Flammability Rating UL 94V-0 Packaging Features Packaging Quantity 125 Packaging Method Box Other Interface Number DTM04-12P Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2024 (240) Candidate List Declared Against: JAN 2024 (240) SVHC > Threshold: Octamethylcyclotetrasiloxane (D4) (.5% in Component Part) Dodecamethylcyclohexasiloxane (D6) (.5% in Component Part) Decamethylcyclopentasiloxane (D5) (.5% in Component Part) Article Safe Usage Statements: Wash thoroughly after handling. Recycle if possible and dispose of the article by following all applicable governmental regulations relevant to your geographic location. Halogen Content  Solder Process For support call+1 800 522 6752 Capability Not Low Halogen - contains Br or Cl > 900 ppm. Not reviewed for solder process 06/29/2024 capability 02:36PM | Page 3 DTM13-12PC PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in] Centerline, Fully Shrouded, Tin, Through Hole - Solder, Sealable, Signal ppm. Solder Process Capability Not reviewed for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-onreach Compatible Parts TE Part # CAT-D485-CH8172 DEUTSCH DTM Housings Also in the Series DEUTSCH DT  Automotive Connector Caps & Covers (19) Automotive Connector Locks & Position Assurance(86) Automotive Housings(654) Connector Backshells(61) Connector Seals & Cavity Plugs(6) Connector Strain Relief(28) Insertion & Extraction Tools(3) Other Automotive Connector Accessories(28) For support call+1 800 522 6752 06/29/2024 02:36PM | Page 4 DTM13-12PC PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in] Centerline, Fully Shrouded, Tin, Through Hole - Solder, Sealable, Signal PCB Headers & Receptacles(105) Also in the Series DEUTSCH DTM Automotive Connector Caps & Covers Automotive Connector Locks & (7) Position Assurance(25) Connector Strain Relief(28) Insertion & Extraction Tools(2) Automotive Housings(100) Connector Backshells(7) PCB Headers & Receptacles(37) Customers Also Bought TE Part #DTM13-12PA TE Part #EEC-325X4B DEUTSCH DTM Headers ENCLOSURE, 3.25 X 4, BLK, NO VENT Documents Product Drawings HDR, 12P, GRY, RA, SN/NI/CU, C English CAD Files Customer View Model ENG_CVM_CVM_DTM13-12PC_99.2d_dxf.zip  English For support call+1 800 522 6752 06/29/2024 02:36PM | Page 5 DTM13-12PC PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in] Centerline, Fully Shrouded, Tin, Through Hole - Solder, Sealable, Signal ENG_CVM_CVM_DTM13-12PC_99.2d_dxf.zip English 3D PDF 3D Customer View Model ENG_CVM_CVM_DTM13-12PC_99.3d_igs.zip English Customer View Model ENG_CVM_CVM_DTM13-12PC_99.3d_stp.zip English By downloading the CAD file I accept and agree to the Terms and Conditions of use. Datasheets & Catalog Pages CONNECTOR SELECTOR English Product Specifications Application Specification English Agency Approvals UL Report English  For support call+1 800 522 6752 06/29/2024 02:36PM | Page 6