E52694-000

LNCL-GEL-1030-1X08IN Gel Tape Strip Table of Dimensions PART NUMBER LNCL-GEL-1030-1X8IN L (Min. Exp.) ± .25 [6.4mm] 8.0 [203.2] T Ref. 0.030 [0.75 mm] W ± .125 [3.2 mm] 1.00 [25.4 mm] Material: Open-cell-foam-backed (one side tacky) for handling ability of top surface. Blue strip: pre-cured silicone gel. Release paper: 5-mil thickness paper Requirements: Except as specified above, the product will meet the requirements of Specification RT-1065. Acceptance tests shall consist of measuring roll width and thickness. Notes: Open-cell foam is 0.030” thick. When compressed to less than the nominal gel thickness, gel penetrates through the open-cell foam to seal substrates on both sides. Specification Control Drawing Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application Title: Gel Tape Strip Document No. LNCL-GEL-1030-1X8IN UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. METRIC DIMENSIONS ARE SHOWN IN BRACKETS DRAWN BY: CAGE CODE: Org. Date: Rev.: Rev. Date: A July 20, 2004 File name: U. NGUYEN 06090 07/20/2004 Lnclgel10301x8in ©2004 Tyco Electronics Corporation. All rights reserved If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None SIZE: A SHEET: 1 of 1