E64909-000

TECHNICAL DATA SHEET TE Document: TTDS-108 Issue: 6 Date: July 2014 HX – LFH Heat Shrink Marker Sleeve HX Low Fire Hazard (LFH) marker sleeves for the identification of wires and cables. Presented as cut sleeves organised in a ladder format. Manufactured using a specially developed radiation cross-linked material. Formulated to give Low Fire Hazard properties, which allow this product to be used in locations where fire may pose a risk to human life, and property. Typical installations include rail, mass transit, and heavy industrial. HX (LFH) marker sleeves are available as part of a complete printing system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software. KEY FEATURES TEMPERATURE RATING  Zero Halogen Operating Temperature Range -55°C to 105°C (-40°F to 221°F)  Low Toxic Fumes  ENVIRONMENTAL Low Smoke  Self-extinguishing, non-flame propagating Does not contain any declarable or prohibited substances from the UNIFE Railway Industry Substances List  Low heat release rate  Resistant to key industrial and rail fluids (defined by RW-2072)  No Halogens, Sulphur, Nitrogen, Phosphorus and Cadmium sources above trace level. The flame retardant used in this product does not contain melamine cyanurate. Does not promote mould growth (ASTM G21 – zero rating) Excellent resistance to burning - typical LOI 39%  Sleeve diameters from 2.4mm to 38.1mm  Shrink ratio 2:1 Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the ‘TE Product Compliance Support Centre’: http://www.te.com/en/resources/product-compliance.html APPLICATIONS SPECIFICATIONS / APPROVALS  Pre-termination Cable Identification  Particularly suitable for locations with a fire risk to human life or equipment  Mass transit, Rail, Aerospace, Marine and TE Connectivity Standard   London Underground 1-085, Fire Safety Performance of Materials ‘Limited, dispersed usage’  Registered for London Underground Product Acceptance and Registration, revision S1011 A2: http://www.lu-apr.co.uk  EN45545-2 ‘Hazard Classification 3’ Requirement Set R22/R23 – unlimited use for railcar design and operation category  BS6853 ‘Vehicle Category Ia’ Interior minor use materials of mass 100g to 500g  NF F 16-101 Railway rolling stock, fire behaviour, choice of materials: Classification A1 Industrial PART DESCRIPTION HX-SCE -1K -4.8 -50 -S1 -4 Color Scoring (optional) Sleeve length (mm) Expanded inside diameter (inches) Pack Size Product Family RW-2072 Industrial Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2072. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 1 of 2 TECHNICAL DATA SHEET TE Document: TTDS-108 Issue: 6 Date: July 2014 HX – LFH Heat Shrink Marker Sleeve ORDERING INFORMATION AVAILABLE FORMAT OPTIONS Prescoring Perforated score to produce multiple marker sleeves from each HX-SCE sleeve. Standard Not scored Code Blank Non standard Side scored Code SS Sided scored w ith one pre score Code SS1 1 Prescore Code S1 2 Prescores Code S2 3 Prescores Code S3 Packaging sizes 1000 piece packages available Standard 1K for all HX-SCE sizes upto to 25.4 2500 pieces available for 4.8 and Non Standard 2.5k 6.4 HX-SCE sizes up to 25.4 5000 pieces available for 2.4 and 3.2 5k HX-SCE sizes 250 piece package available for all HX-SCE sizes Colors Standard Yellow White Code 4 9 Non standard Red Green Blue Orange Code 2 5 6 3 Specify product name, pack size, sleeve size, sleeve length (always 50) pre-score (blank if not required) and colour. Ordering example: HX-SCE-1K-4.8-50-S1-4 Inside diameter Ordering description As supplied (minimum) mm After recovery (Maximum) inches mm inches 0.047 Recommended w ire diameter use range mm inches HX-SCE-1K-2.4-50-- 2.4 0.094 1.19 1.27 - 1.90 0.050 - 0.075 HX-SCE-1K-3.2-50-- 3.2 0.126 1.58 0.060 1.77 - 2.66 0.069 - 0.105 HX-SCE-1K-4.8-50-- 4.8 0.189 2.36 0.090 2.54 - 4.06 0.100 - 0.160 HX-SCE-1K-6.4-50-- 6.4 0.250 3.18 0.125 3.81 - 5.46 0.150 - 0.215 HX-SCE-1K-9.5-50-- 9.5 0.375 4.75 0.187 5.59 - 8.12 0.220 - 0.320 HX-SCE-1K-12.7-50-- 12.7 0.500 6.35 0.250 6.99 - 10.79 0.275 - 0.425 HX-SCE-1K-19.0-50-- 19.0 0.730 9.53 0.375 10.16 - 16.25 0.400 - 0.640 HX-SCE-1K-25.4-50-- 25.4 1.000 12.70 0.500 14.29 - 21.59 0.563 - 0.850 HX-SCE-38.1-50-- 38.1 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300 Standard pack size for 38.1 is 250 pieces PRINTER INFORMATION SOFTWARE Print Quality and Print Performance can only be guaranteed when specific TE printer and ribbons are used. Cable Markers are fully supported by WINTOTAL and PrintEasy label printing software, available from the TE product store: The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’ http://www.te.com/en/general/label-printing-software.html Contact a TE representative for further information This document can be found at the TE document centre: http://www.te.com/commerce/DocumentDelivery/DDECont roller While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 2 of 2