EB1138

TECHNICAL DATASHEET Doc. No: TTDS-180 Rev1 Tyco Electronics EB, EK, TEK – write-on labels EB self-adhesive write-on labels made of yellow fabric for identifying electrical systems, and articles. Easy to mark by pencil, typewriter and indelible ball-point or felt-tip pen. Label material PVC matt top coated yellow vinyl Adhesive Permanent pressure sensitive acrylic Liner Double sided poly coated semi-bleached mando. Thickness: Label 0.16 mm ±15% Adhesive 0.04 mm ± 10% Liner 0.12 mm ±10% Peel Adhesion Service Temperature ASTM D3652 Stainless steel 660 N/m Acrylic 660 N/m ASTM D903 (72 hour dwell) Glass 660 N/m Average values Polypropylene 90 N/m -30ºC to +80 ºC [Note: minimum and maximum temperatures also depends on substrate to which label is attached] Minimum application temperature Print permanence 10 ºC Dry rub 500+ cycles SAE-AS-81531 (permanent felt-tip marker ) Storage stability 2 years at 21°C and 50% RH Use Indoor Tyco Electronics idento GmbH Paul-Ehrlich-Straße 23 D-63322 Rödermark Tel.: 06074/8908-0 Tyco Electronics Idento ZI de Comboire - 1 rue des Montagnes de Lans F-38130 Echirolles Phone: +33 (0) 476 099 696 Author: M Priddle Print date: 9-Mar-10 Updated: Page: 1 of 1 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.