EC1674-000

TECHNICAL DATA SHEET TE Document: TTDS-026 Issue: 2 Date: March 2014 Z-Type Markers Z-Type markers are individual push-on markers used to identify wires and small cables permanently. The markers are manufactured using PVC and designed with an expanding profile, enabling each marker to accommodate a wide range of wire/cable sizes. Z-Type markers are a simple, cost-effective solution for many commercial wire identification applications. The markers are supplied either straight cut or chevron cut. The chevron cut option ensures the markers remain aligned. Standard Z-Type markers are yellow or white with black legends and can be supplied as loose pieces packed in boxes, or on reels. Color coded markers are also available. Suitable for industrial applications. KEY FEATURES TEMPERATURE RATING  Self-extinguishing. Operating Temperature Range -45°C to 70°C (-40°F to 158°F)  Resistant to key Industrial fluids, including those used in Mass transit, Aviation and Military (defined by RW-2535). ENVIRONMENTAL  Nine sizes covering wire diameters from 1.5mm to 12.7mm (0.06 inches to 0.5 inches). Information and a downloadable declaration covering RoHS and REACH compliance can be found at the ‘TE Product Compliance Support Centre’: http://www.te.com/en/resources/product-compliance.html APPLICATIONS  Pre-termination cable identification. SPECIFICATIONS / APPROVALS  Identification of small wires and cables. TE Connectivity Standard  Applicator wands available for easy marker installation. Electrical and Electronic Equipment, Industrial   Industrial  BS 6746C:1993 Colour chart for insulation and sheath of electric cables  IEC 60304 Standard Colours for Insulation for Low Frequency Cables and Wires PART DESCRIPTION 0616 1 4 00 RW-2535 Legend code Color code Packaging Code Product size code Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2535. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved Class I Data Classification - See Policy TEC-02-04 Page 1 of 3 TECHNICAL DATA SHEET TE Document: TTDS-026 Issue: 2 Date: March 2014 Z-Type Markers AVAILABLE FORMATS CHEVRON CUT 100mm nominal MARKER LENGTH 4° 140.0° STRAIGHT CUT 0.25mm nominal thickness APPLICATOR DETAIL MARKER DETAIL ORDERING INFORMATION Order Code Straight cut Order Code Chevron cut Marker size 0580 1151 5 Recommended cable diameter mm inches 1.5 – 2.0 0.06 – 0.08 0581 1152 7 2.0 – 3.2 0615 1153 9 2.5 – 4.0 0616 1154 11 0617 1155 13 0618 1156 0620 1157 0622 1158 0624 1159 Marker length Applicator size code Pack Quantity Applicator order code mm 4.5 inches 0.177 - 1000 - 0.08 – 0.13 4.5 0.177 1 1000 12510000 0.10 – 0.16 4.5 0.177 2 1000 12520000 2.9 – 4.7 0.11 – 0.19 4.5 0.177 3 1000 12530000 3.4 – 5.7 0.13 – 0.22 4.5 0.177 4 1000 12540000 15 3.8 – 6.3 0.15 – 0.25 4.5 0.177 5 1000 12550000 18 4.3 – 6.9 0.17 – 0.27 4.5 0.177 6 500 12560000 23 5.5 - 8.9 0.22 - 0.35 6.0 0.236 - 500 - 35 7.9 - 12.7 0.31 - 0.50 6.0 0.236 - 250 - PACKAGING CODE 1 Box 3 Reel PACKAGING OPTIONS (CHEVRON AND STRAIGHT CUT) White marker with black legend Boxes, reels Yellow marker with black legend Reels Color coded Boxes COLOR CODE Code Marker color Ink color Code Marker color Ink color Code Marker color Ink color 0 Black White 4 Yellow Black 8 Grey Black 1 Brown White 5 Green Black 9 White Black 2 Red Black 6 Blue Black 3 Orange Black 7 Violet Black ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved Class I Data Classification - See Policy TEC-02-04 Page 2 of 3 TECHNICAL DATA SHEET TE Document: TTDS-026 Issue: 2 Date: March 2014 Z-Type Markers LEGEND CODE Legend Code Legend Code Legend Code 0 1 00 J 01 K 19 / 38 20 ~ 39 2 3 02 03 L 21 Earth 40 M 22 ) 41 4 04 N 23 Blank 42 5 6 05 O 24 : 43 06 P 25 , 44 7 07 Q 26 < 45 8 08 R 27 > 46 9 09 S 28 = 47 A 10 T 29 . 48 B 11 U 30 C 12 V 31 D 13 W 32 E 14 X 33 F 15 Y 34 G 16 Z 35 H 17 + 36 I 18 - 37 Order example 06161400: Z-type marker, size 11, yellow, black mark, character O, boxed While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved Class I Data Classification - See Policy TEC-02-04 Page 3 of 3