EC6496-000

TECHNICAL DATA SHEET TE Document: TTDS-025 Issue: 2 Date: March 2014 K-Type Cable Markers K-Type markers are used to identify wire bundles, cables, pipes and conduits. The oval shaped profile has been designed to allow markers to be accurately positioned onto a carrier strip. The marker and carrier strip assembly is attached to the substrate using cable ties. K-Type markers are ideal for post termination applications or where retrofitting is required. Markers are supplied as internationally color coded yellow with pre-printed black legends. K-Type markers come in one standard size to fit carrier strips that can hold from 7 to 18 markers and are made from a plasticized PVC material. Suitable for industrial applications. KEY FEATURES TEMPERATURE RATING  Self-extinguishing Operating Temperature Range -45°C to 70°C (-40°F to 158°F)  Resistant to key Industrial fluids, including those used in Mass transit, aviation and military (defined by RW-2535) ENVIRONMENTAL http://www.te.com/en/resources/product-compliance.html APPLICATIONS  Post termination cable identification  Identification of large cables, wire bundles, pipework and conduit.  Installation friendly – easy to replace, ideal for retrofitting and repairs. Only cable ties are needed. Electric and Electronic Equipment, Light industrial  1 4 SPECIFICATIONS / APPROVALS TE Connectivity Standard  RW-2535 Industrial PART DESCRIPTION 1361 Information and a downloadable declaration covering RoHS and REACH compliance can be found at the ‘TE Product Compliance Support Centre’: 01 Legend code Color code  BS 6746C:1993 Colour chart for insulation and sheath of electric cables  IEC 60304 Standard Colours for Insulation for Low Frequency Cables and Wires Packaging Code Product size code Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2535. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 1 of 2 TECHNICAL DATA SHEET ORDERING INFORMATION TE Document: TTDS-025 Issue: 2 Date: March 2014 K-Type Cable Markers AVAILABLE FORMAT 5.8 Length 9.5mm 4 10 Marker detail Carrier strip detail Dimensions in mm MARKER Size code Marker size Reel Quantity 1361 65 500 PACKAGING CODE COLOR CODE 1 (Reel) 4 (Yellow) LEGEND CODE Legend 0 1 2 3 4 5 6 7 8 9 A B Code 00 01 02 03 04 05 06 07 08 09 10 11 Legend C D E F G H I J K L M N Code 12 13 14 15 16 17 18 19 20 21 22 23 Legend O P Q R S T U V W X Y Z Code 24 25 26 27 28 29 30 31 32 33 34 35 Legend + / ~ Earth ) Blank : , < > = . Code 36 37 38 39 40 41 42 43 44 45 46 47 48 CARRIER STRIP Order code 11320000 11310000 11300000 Carrier length mm (inches) 66 (2.59) 97 (3.81) 134 (5.27) Marker Capacity 7 Markers 12 Markers 18 Markers Quantity 500 500 250 Note all carrier strips are supplied in Black PVC While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 2 of 2