EC7608-000

TECHNICAL DATA SHEET TE Document: TTDS-037 Issue: 4 Date: April 2014 HL Cable Marker HL Cable Markers are flat, non-adhesive labels that can be used to identify large cables and wire bundles in particularly aggressive environments. Cable Markers can be applied post cable termination using cable ties. Manufactured using a specially developed radiation cross-linked flame retarded polymer. Typical installations include mass transit, Military and Aerospace. Presented as organised markers assembled onto either a fanfold or reeled paper carrier to allow for greater range of printing formats and kitting. KEY FEATURES TEMPERATURE RATING  Highly flame resistant (Excellent resistance to burning - Oxygen Index 35%) Operating Temperature Range -55°C to 135°C (-67°F to 275°F)  Resistant to key industrial and military grade fluids (defined by RW-2513) ENVIRONMENTAL  Available in several height/width combinations, and non-standard color options The Cable Marker, including the print, does not promote mould growth (ASTM G21 / 28 days – zero rating) Does not migrate materials which will damage or corrode the surrounding environment, including the conductor Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: APPLICATIONS  Post termination cable identification http://www.te.com/en/resources/product-compliance.html  Identification of large cables, wire bundles or pipework SPECIFICATIONS / APPROVALS  Installation friendly – easy to replace, ideal for retrofitting and repairs. Only tie wraps are needed.  Mass transit, Rail, Aerospace, Marine, Military and Industrial TE Connectivity Standard  Industrial  PART DESCRIPTION RW-2513 EN45545-2 ‘Hazard Classification 3’ Requirement Set R24 HL 150 YW 1 TS 033 B Pack size Printable width (mm) Format Scoring Color Marker height Product family Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2539. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 1 of 3 TECHNICAL DATA SHEET ORDERING INFORMATION TE Document: TTDS-037 Issue: 4 Date: April 2014 HL Cable Marker AVAILABLE FORMATS Web Width 127mm Web Width 101mm Printable Height Printable Height Printable Width Printable Width Typical layout for HL*****TS Part Description Typical layout for HL*****NF Marker Dimensions (Width x Height) mm HL104 HL104 HL104 HL104 HL104 HL150 HL150 HL150 HL150 HL150 HL203 HL203 HL203 HL203 HL203 HL253 HL253 HL253 HL253 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 025B 033B 038B 050B 070B 025B 033B 038B 050B 070B 025B 033B 038B 050B 070B 025B 033B 038B 050B ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change 45.0 52.0 58.0 70.0 90.0 45.0 52.0 58.0 70.0 90.0 45.0 52.0 58.0 70.0 90.0 45.0 52.0 58.0 70.0 x x x x x x x x x x x x x x x x x x x 10.4 10.4 10.4 10.4 10.4 15.0 15.0 15.0 15.0 15.0 20.3 20.3 20.3 20.3 20.3 25.3 25.3 25.3 25.3 Inches 1.80 2.10 2.30 2.75 3.50 1.80 2.10 2.30 2.75 3.50 1.80 2.10 2.30 2.75 3.50 1.80 2.10 2.30 2.75 x x x x x x x x x x x x x x x x x x x 0.4 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 Printable Area (Width x Height) mm 25 33 38 50 70 25 33 38 50 70 25 33 38 50 70 25 33 38 50 x x x x x x x x x x x x x x x x x x x Pack Size NF TS 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 300 300 300 300 1000 1000 1000 1000 1000 500 500 500 500 500 500 500 500 500 500 250 250 250 250 Inches 10.4 10.4 10.4 10.4 10.4 15.0 15.0 15.0 15.0 15.0 20.3 20.3 20.3 20.3 20.3 25.3 25.3 25.3 25.3 1.00 1.30 1.50 2.00 2.75 1.00 1.30 1.50 2.00 2.75 1.00 1.30 1.50 2.00 2.75 1.00 1.30 1.50 2.00 x x x x x x x x x x x x x x x x x x x 0.4 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 Class I Data Classification - See Policy TEC-02-04 Page 2 of 3 TECHNICAL DATA SHEET TE Document: TTDS-037 Issue: 4 Date: April 2014 HL Cable Marker OPTIONS Prescoring Not available on this item - always set to '1' Pack sizes Standard pack sizes only on this item - always set to 'B' Colors Standard Code Non standard White WE Red RD Format NF TS Dot Matrix Printing (fanfold - single sided) Thermal Transfer (reel - single sided) Printable width on marker 025 033 038 050 070 25mm 33mm 38mm 50mm 70mm Yellow YW Blue BE (1 inch) (1.3 inches) (1.5 inches) (2 inches) (2.75 inches) Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width and pack size (always B) e.g. HL150YW1NF033B. PRINTER INFORMATION SOFTWARE Print Quality and Print Performance can only be guaranteed when specific TE printer and ribbons are used. Cable Markers are fully supported by WINTOTAL and PrintEasy label printing software, available from the TE product store: The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’ http://www.te.com/en/general/label-printing-software.html Contact a TE representative for further information This document can be found at the TE document centre: http://www.te.com/commerce/DocumentDelivery/DDEController While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 3 of 3