EC7633-000

TECHNICAL DATA SHEET TE Document: TTDS-013 Issue: 5 Date: March 2014 HLX Cable Marker HLX Cable Markers are flat, non-adhesive labels that can be used to identify large cables and wire bundles in particularly aggressive environments. Presented as organised markers assembled onto a reel. Cable markers can be applied post cable termination using cable ties. Manufactured using a specially developed radiation cross-linked polymer. Formulated to give Low Fire Hazard properties, which allow this product to be used in locations where fire may pose a risk to human life, and property. Typical installations include underground railways and mass transit. This Cable marker is printed using thermal transfer technology. KEY FEATURES TEMPERATURE RATING Operating Temperature Range -40°C to 105°C (-40°F to 221°F)  Zero Halogen  Low toxic fumes  Low Smoke  Self-extinguishing  Resistant to key industrial and rail fluids ENVIRONMENTAL Does not contain any declarable or prohibited substances from the UNIFE Railway Industry Substances List (defined by RW-2523)  Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the ‘TE Product Compliance Support Centre’: http://www.te.com/en/resources/product-compliance.html APPLICATIONS  Post termination cable identification  Identification of large cables, wire bundles or pipework Installation friendly – easy to replace, ideal for retrofitting and repairs. Only Cable ties are needed. Particularly suitable for locations with a fire risk to human life or equipment   Does not promote mould growth (ASTM G21 – zero rating) Excellent resistance to burning - typical LOI 39%  No Halogens, Sulphur, Nitrogen, Phosphorus and Cadmium sources above trace level Mass transit, Rail, Aerospace, Marine and Industrial PART DESCRIPTION HLX150 YW 1 TS 033 B Pack size Printable width (mm) Format Scoring SPECIFICATIONS / APPROVALS TE Connectivity Standard  RW-2523 Industrial  London Underground 1-085, Fire Safety Performance of Materials ‘Limited, dispersed usage’  Registered for London Underground Product Acceptance and Registration, revision S1011 A2: http://www.lu-apr.co.uk  EN45545-2 ‘Hazard Classification 3’ Requirement Set R24  BS6853 ‘Vehicle Category Ia’ Interior minor use materials of mass 100g to 500g  NF F 16-101 Railway rolling stock, fire behaviour, choice of materials: Classification A1 Color Marker height (mm) Product Family Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2523. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 1 of 3 TECHNICAL DATA SHEET ORDERING INFORMATION TE Document: TTDS-013 Issue: 5 Date: March 2014 HLX Cable Marker AVAILABLE FORMAT OPTIONS Web width 101mm Pitch Prescoring Not available on this item - always set to 1 Pack sizes Standard - always set to 'B' Colors Standard Code Non standard Code White WE Red RD Printable width on marker 025 033 038 050 070 25mm 33mm 38mm 50mm 70mm Height as per code Printable width as per code Yellow YW Blue BE (1 inch) (1.3 inches) (1.5 inches) (2 inches) (2.75 inches) The format reference for this product is TS. This product is for thermal transfer printing only. Ordering information: Specify product name, marker height, color, scoring option (always 1), format (always TS), printable width and pack size (always B), e.g. HLX150YW1TS033B. Part Description HLX1041TS025B HLX1041TS033B HLX1041TS038B HLX1041TS050B HLX1041TS070B HLX1501TS025B HLX1501TS033B HLX1501TS038B HLX1501TS050B HLX1501TS070B HLX2031TS025B HLX2031TS033B HLX2031TS038B HLX2031TS050B HLX2031TS070B HLX2531TS025B HLX2531TS033B HLX2531TS038B HLX2531TS050B HLX2531TS070B Marker Dim ensions (Width x Height) 45 53 58 70 90 45 53 58 70 90 45 53 58 70 90 45 53 58 70 90 mm x 10.4 x 10.4 x 10.4 x 10.4 x 10.4 x 15.0 x 15.0 x 15.0 x 15.0 x 15.0 x 20.3 x 20.3 x 20.3 x 20.3 x 20.3 x 25.3 x 25.3 x 25.3 x 25.3 x 25.3 ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Inches 1.77 x 0.41 2.09 x 0.41 2.28 x 0.41 2.76 x 0.41 3.54 x 0.41 1.77 x 0.59 2.09 x 0.59 2.28 x 0.59 2.76 x 0.59 3.54 x 0.59 1.77 x 0.80 2.09 x 0.80 2.28 x 0.80 2.76 x 0.80 3.54 x 0.80 1.77 x 1.00 2.09 x 1.00 2.28 x 1.00 2.76 x 1.00 3.54 x 1.00 Printable Area (Width x Height) mm 25 x 33 x 38 x 50 x 70 x 25 x 33 x 38 x 50 x 70 x 25 x 33 x 38 x 50 x 70 x 25 x 33 x 38 x 50 x 70 x 10.4 10.4 10.4 10.4 10.4 15.0 15.0 15.0 15.0 15.0 20.3 20.3 20.3 20.3 20.3 25.3 25.3 25.3 25.3 25.3 Inches 0.98 x 0.41 1.30 x 0.41 1.50 x 0.41 1.97 x 0.41 2.76 x 0.41 0.98 x 0.59 1.30 x 0.59 1.50 x 0.59 1.97 x 0.59 2.76 x 0.59 0.98 x 0.80 1.30 x 0.80 1.50 x 0.80 1.97 x 0.80 2.76 x 0.80 0.98 x 1.00 1.30 x 1.00 1.50 x 1.00 1.97 x 1.00 2.76 x 1.00 Pitch mm Inches 12.7 0.5 12.7 0.5 12.7 0.5 12.7 0.5 12.7 0.5 25.4 1.0 25.4 1.0 25.4 1.0 25.4 1.0 25.4 1.0 25.4 1.0 25.4 1.0 25.4 1.0 25.4 1.0 25.4 1.0 50.8 2.0 50.8 2.0 50.8 2.0 50.8 2.0 50.8 2.0 Class I Data Classification - See Policy TEC-02-04 Num ber of Num ber of m arkers m arkers per page per pack 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 1000 1000 1000 1000 1000 500 500 500 500 500 500 500 500 500 500 250 250 250 250 250 Page 2 of 3 TECHNICAL DATA SHEET TE Document: TTDS-013 Issue: 5 Date: March 2014 HLX Cable Marker PRINTER INFORMATION SOFTWARE Print Quality and Print Performance can only be guaranteed when specific TE printer and ribbons are used. Cable Markers are fully supported by WINTOTAL and PrintEasy label printing software, available from the TE product store: http://www.te.com/en/general/label-printing-software.html The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’ Contact a TE representative for further information This document can be found at the TE document centre: http://www.te.com/commerce/DocumentDelivery/DDEC ontroller While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. ©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 3 of 3