EEC-325X4B

4 C 2 3 CIRCUIT BOARD HOLE LOCATIONS AND KEEP CLEAR AREAS FOR 2019 TE Connectivity. All Rights Reserved. CIRCUIT BOARD HOLE LOCATIONS AND KEEP CLEAR AREAS FOR DTM13-12PX-12PX-R008 DTM13-12PX-12PX-GR01 ALL DIMENSIONS REFERENCE TOP VIEW ASSEMBLED HEADER SHOWN FOR REFERENCE (17.61 ) 2 15.0 10.0 2.00 BOTTOM SIDE ONLY D 82.55 4.00 2 REVISIONS P DTM13-12PX-R008 DTM13-12PX-GR01 ALL DIMENSIONS REFERENCE TOP VIEW ZONE A 15.0 10.0 2.00 3.00 10.00 (19.21 ) 1 LTR DESCRIPTION F1 G 82.55 3.00 4.00 H H1 12.0 ⌀3.00 FOR #4 KEEP CLEAR 12.00 12.00 8.80 4.41 9.00 2.45 (133.03 ) 30.00 17.02 C LABEL AREA BOTTOM SIDE ONLY 101.60 HOLE FOR ⌀1.04 PIN 4.19 8.38 12.57 16.76 20.96 2.10 IG REVISED PER PCN E-21-003960 05APR2021 DM CB REVISED PER PCN E-21-004230 09APR2021 AP IG 5.00 44.00 84.60 101.60 7.00 THREE DIMENSIONAL SPACE LIMIT APPROXIMATE INTERNAL SPACE FOR COMPONENT SPACE LAYOUT MAX. COMPONENT HEIGHT UNDER BOARD 2.00 mm. 12.00 30.00 2 35.00 50.00 ±0.50 19.00 14.00 ⌀3.00 FOR #4 [M3] SCREW 6.29 10.48 16.00 ±0.50 C WITH EXCEPTION OF NOTED ZONE A WHERE THE MAX COMPONENT HEIGHT UNDER BOARD IS 1.65mm. (R3.00 ) 4PL 80.00 ±0.50 HEADER 114.00 ±1.00 EEC-325X4A ONLY 3D VIEW ⌀7.400 THRU 2PL DTM13-12PX-12PX-R008 AND DTM13-12PX-12PX-GR01 HEADER AND MOUNTING HARDWARE SHOWN FOR REFERENCE FOR 1/4" OR6 mm FASTENER RECOMMENDED TORQUE 62-88 IN-LB (7-10 N-M) 7.50 B 60.00 ±0.50 B ⌀16.00 2PL 39.00 ±0.50 25.00 ±0.50 ℄ TOP SURFACE OF PCB REF 118.80 ±0.50 62.50 ±0.50 ENCLOSURE 15.00 32.50 POCKET FOR ADHESIVE VENT PATCH. (CUSTOMER SUPPLIED) +0.50 -1.50 34.75 3 MEASUREMENT SHOULD BE TAKEN FROM THE BOTTOM. 2 MAXIMUM COMPONENT HEIGHT DEPENDS ON LOCATION DUE TO PART DRAFT RIBS. 1. THIS ENCLOSURE MATES WITH DTN13-12PX-R008 (Ni PINS); DTM13-12PX-GR01 (Au DTM13-12PX-12X-R008 (Ni PINS); DTM13-12PX-12PX-GR01 (Au PINS) HEADER (X = A,B,C,D KEYS). NOTES: 1.90 ±0.15 PCB SLOT PINS); 0.36 ±0.08 DIMENSIONS: mm 105.49 ±0.50 MATERIAL PA66 GF15 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 - BLACK - DTM13-12PX-R008 AND DTM13-12PX-GR01 HEADER AND MOUNTING HARDWARE SHOW FOR REFERENCE TE INTERNAL PN DEUTSCH PN EEC-325X4B EEC-325X4B EEC-325X4A THIS DRAWING IS A CONTROLLED DOCUMENT. A 3D VIEW +0.50 -1.50 MIN 25.14 ALLOWABLE WARPAGE 1471-9 (3/13) SM 9.00 12.00 SECTION A-A NON-VENTED VERSION PART NUMBER EEC-325X4B 07OCT2020 D ⌀5.00 PCB REVISED PER PCN E-20-012817 4.41 2.45 #4 [M3] SCREW LOCATION OPTIONAL RECOMMENDED TORQUE 6-10 lbf-in (0.68-1.1 N-M) VENT HOLE INCLUDED ON PART NUMBER EEC-325X4A ONLY IG 8.80 (117.60 ) 101.60 ±0.50 (36.00 ) CO 12.0 HOLE FOR ⌀1.04 PIN APVD 05MAR2020 60.00 KEEP CLEAR [M3] SCREW DWN REVISED PER PCN E-20-002881 10.00 SECTION E-E DTM13-12PA-R008 HEADER SHOWN FOR REFERENCE ONLY DATE 25APR2000 C. WOODRUFF CHK 29MAY2012 B. BYFORD APVD 23MAY2012 S.BEARD DWN PRODUCT SPEC 108-151010 APPLICATION SPEC - - WEIGHT CUSTOMER DRAWING EEC-325X4A HOLE NO HOLE TE Connectivity NAME PCB ENLCOSURE SHOWN WITH 12 AND 24 PIN HEADER VENTED AND NON-VENTED DTM SERIES SIZE 140 GR KEY CAGE CODE A2 11139 RESTRICTED TO DRAWING NO EEC-325X4A EEC-325X4B SCALE 1:1 SHEET 1 A OF - 1 REV H1