EET-6090P-4

TECHNICAL DATASHEET Doc. No: TTDS 174 Rev1 Tyco Electronics EET-…P-4 EET-...P-4 self-adhesive Thermal transfer printable labels. Label material Polyester film, yellow Adhesive Permanent pressure sensitive acrylic Liner Glassine Thickness: Label 0.05 mm ±10% ASTM D3652 Adhesive 0.033mm ±10% ASTM D3652 Liner 0.056mm ±10% ASTM D3652 Peel Adhesion at 23°C Stainless steel 700 N/m FTM 1 (72 hour dwell) Average values Service Temperature -40ºC to +150 ºC Minimum application temperature 10 ºC Print permanence Dry rub SAE-AS-81531 Print legible after 30 rubs Storage stability 2 years at 21°C and 50% RH Printability Thermal transfer Tyco Electronics idento GmbH Paul-Ehrlich-Straße 23 D-63322 Rödermark Tel.: 06074/8908-0 Tyco Electronics Idento ZI de Comboire - 1 rue des Montagnes de Lans F-38130 Echirolles Phone: +33 (0) 476 099 696 Author: M Priddle Print date: 23-Jun-10 Updated:8-Jun-10 Page: 1 of 1 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.