EJ05-1A4-D012-W

General Purpose Low Power PCB Relays SCHRACK Miniature PCB Relay EJ Outline Dimensions  (unit : mm) PC Board Layouts n 1pole 3A/5A, 1 form A (NO) contact coil 200mW Outline Dimensions n Ambient temperature  (unit : mm) 85°C n RoHS compliant (Directive 2002/95/EC) n Coil UL class F (155) Insulation System 2 - Φ 1.1 2-Φ1 n Sensitive 11.5 4.7 15 PC Board Layouts 0.8 4.7 2 0.35 7 Wiring Diagram  (Bottom View) 0.24 Layouts 0.2 (Bottom View) PC Board 0.8 2 - Φ 1.1 6.9 4.7 Approvals 20.4 VDE 40026866, UL E58304 0.35 11.5 Technical data of approved types on request. Z 4 imension. Type Contact Load Cycles Tolerance 0.99mm max.IEC±61810 0.1mm form A (NO) 5A,250VAC, cosφ=1, 85°C 100x103 1 - 2.99mm EJ ± 0.2mm form A (NO) 2A,250VAC, cosφ=1, 85°C 100x103 3mm min. EJ ± 0.3mm EJ * Refer form A (NO) cosφ=1, 105°C in the d 250x103 to below table3A,250VAC, for any tolerance not specified imension. UL 508 Tolerance EJ form A (NO) 3A,277VAC, cosφ=1, 85°C 50x103 4.7 6.9 4.7 Contact Data 3 0.35 Contact Data 2 - Φ 1 (continued) * Refer to belowContact table for any tolerance not specified in the d ratings 11.5 7 7 15 1.1 4 2 3 0.35 1  (unit : mm) 2-Φ1 7 1 20.4 11.5 2 - Φ 1.1 3.15 0.35 (Bottom View) Wiring Diagram  (Bottom View) 15 0.2 Typical applications Home appliances. 7 11.5 3.15 0.24 0.35 (Bottom View) 2 3.15 1.1 Contact arrangement 1 form A (NO) Rated voltage 250VAC Max. switching voltage 30VDC, 277VAC 0.99mm max. ± 0.1mm Rated current Wiring Diagram 3A/5A  (Bottom View) 1 - 2.99mm ± 0.2mm Reference Data Mechanical endurance >5x106 operations Switching power 1,250VA, 150W 3mm min. ± 0.3mm 0.24Contact material AgNi 0.2 3 4 0.8contact 0.35load Min. recommended 100mA, 5VDC Initial contact resistance 100mΩ at 1A, 6VDC Operate time Operate Time E x pectanwith/without cy L i-1f e E x pectancy Frequency Lofi f e operation, load 1800/18000h 㪈㪉 3A Type 5A Type Operate/release time max. 10ms Reference Data 㪈㪇㪇 㪈㪇㪇 㪈㪇 7Electrical endurance 250 VAC EJ00 (3A): 3A, 250VAC, resistive: 100x103 ops. 250 VAC 㪏 EJ05 (5A): 5A, 250VAC, resistive: 100x103 ops Resistive Resistive Operate Time 㪍 Electrical endurance L i f e E x pe*cRefer tancyto below L i f e E x pinecthe tandcy imension. 㪈㪇 table for any tolerance not specified 㪈㪇 㪈㪉 3A Type 5A㪋 Type 㪈 㪊 㪈㪇 㪌 Resistive 3mm min.㪈 ± 0.3mm 㪈 㪈㪇 㪈 㪈㪍㪇 % of Supplying Voltage to Coil 3A Type 㪈㪋㪇 㪈㪉㪇 㪊 Coil Temperature Rise Contact Current (A) L i f e E x pectancy 5A Type Time (msec) 4 Operation % of Supplying Voltage to Coil (x10 ) 㪋㪇 㪉㪇 㪊 Current (A) perature Rise 㪇 㪈㪋㪇 㪈㪉㪇 Release Voltage Operating Voltage Range 㪈㪇㪇 Hot Coil 3A & 5A Applied 㪄㪋㪇 㪄㪊㪇 㪄㪉㪇 㪄㪈㪇 㪇 㪈㪈㪇 㪉㪇 㪊㪇 㪋㪇 㪌㪇 㪍㪇 㪎㪇 㪏㪇 㪐㪇 㪈㪇㪇 㪏㪇 㪈 㪊 㪌 Ambient Temp. ( ) 㪍㪇 Contact Current Cool (A) Coil 㪋㪇 Hot Coil 0A Applied 㪏 㪍 㪋 㪇 㪇㪅㪏 㪇 All figures are given for coil without pre-energization, at ambient temperature +23°C. 㪈 㪈㪅㪉 㪈㪅㪋 Coil Power (% of Rated Voltage) Release Voltage 㪉㪇 㪇 㪄㪋㪇 㪄㪊㪇 㪄㪉㪇 㪄㪈㪇 㪇 㪈㪇 㪉㪇 㪊㪇 㪋㪇 㪌㪇 㪍㪇 㪎㪇 㪏㪇 㪐㪇 㪈㪇㪇 Ambient Temp. ( and ) product specification according 04-2013, Rev. 0413 Catalog www.te.com to IEC 61810-1 and to be used only together © 2013 Tyco Electronics Corporation, with the ‘Definitions’ section. a TE Connectivity Ltd. company. Voltage Range pplied 㪈㪅㪋 Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 003 3 2.25 0.3 45 200 005 5 3.75 0.5 125 200 006 6 4.50 0.6 180 200 009 9 6.75 0.9 405 200 012 12 9.00 1.2 720 200 018 18 13.50 1.8 1620 200 024 24 18.00 2.4 2890 200 㪉 㪌 㪈㪅㪉 㪋 Coil voltage range 3 to㪈24VDC 㪈㪅㪉 㪊 㪌 㪇㪅㪏 㪈㪅㪋 Coil insulation system according UL class 155 (F) Coil Power (% of Rated Voltage) Contact Current (A) Operate Time 㪈㪇 Cool Coil 㪈 㪍 Coil Power (% of Rated Voltage) Coil Data 㪈㪉 㪈㪇㪇 Operating Voltage Range 㪈㪇 㪈㪍㪇 Hot Coil 0A Applied 㪇㪅㪏 㪏 㪉 㪈 㪌 250 VAC 250 VAC 㪈㪇㪇 Hot Coil 3A & 5A Applied Resistive Coil Temperature Rise Resistive 㪏㪇 㪍㪇 㪌 㪈 㪈 ctancy 㪊 Contact Current (A) Contact Current (A) 㪈㪇 㪉 250 VAC Resistive 㪇 Time (msec) Operation (x10 4) 㪈 㪈㪇㪇 Operation (x10 4) Tolerance 0.99mm max. ± 0.1mm 250 VAC ± 0.2mm 1 - 2.99mm 㪈㪇㪇 Time (msec) Operation (x10 4) Operation (x10 4) 1 20.4 Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Copyright 200 by Tyco Electronics EC K.K. All rights reserved.  Edition : 2/2008 REV. TYCO Electronics EC K.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki , 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please ca ll local TYCO Electronics for the latest Version. 1 㪈㪇 㪈㪇 General Purpose Low Power PCB Relays Outline Dimensions  (unit : mm) 㪊 㪈 㪌 7 㪇㪅㪏 㪈 㪈㪅㪉 㪈㪅㪋 Coil Power (% of Rated Voltage) 4.7 0.2 0.8 3 0.35 4 2 㪈㪍㪇 SCHRACK 2-Φ1 11.5 㪌 15 0.24 0.35 㪋 (Bottom View) 㪉 Terminal Wiring assignment Diagram  (Bottom View) Bottom view on solder pins 3.15 Coil Temperature Rise 㪍 㪇 㪊 Contact data (continued) Coil operative range 㪏 2 - Φ 1.1 Miniature PCB Relay EJ (Continued) Contact Current (A) Contact Current (A) 㪈㪋㪇 0.35 Hot Coil 3A & 5A Applied Hot Coil 0A Applied Release Voltage 0.99mm max. 1 - 2.99mm PC Board Layouts (Bottom View) PCB layout 3mm min. ± 0.3mm Outline Dimensions  (unit : mm) 㪈㪇 㪉㪇 㪊㪇 㪋㪇 㪌㪇 㪍㪇 㪎㪇 㪏㪇 㪐㪇 㪈㪇㪇 2 - Φ 1.1 2-Φ1 Ambient Temp. ( ) 11.5 Reference Data 250 VAC Resistive 0.35 㪈㪇 㪊 㪊 㪋 Ambient Temp. ( ) 㪌 0.99mm max. 1 - 2.99mm 3mm min. 㪊 㪈㪅㪉 㪈㪅㪋 Wiring Diagram   0.2 0.8 0.35 2 L i f e E x pectancy 0.35 5A Type 11.5 Operate Time 20.4 㪈㪉 7 㪈㪇 6.9 4.7 250 VAC Resistive 㪈㪇 㪏 * Refer to below table for an 㪍 㪋 0.99mm max. 1 - 2.99mm 3mm min. 㪉 Tolerance ± 0.1mm ± 0.2mm ± 0.3mm 㪇 㪈 㪌 㪈 0.24 0.35 㪈 㪈 㪇㪅㪏 Tolerance ± 0.1mm ± 0.2mm ± 0.3mm 1.1 Operation (x10 4) % of Supplying Voltage to Coil Operation (x10 4) 4 Coil Power in (%the of dRatedimension. Voltage) Contact Current (A) table for any tolerance not * Refer to below specified 1.1 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85°C Coil Temperature Rise Category of environmental protection IEC 61810 RTII - flux proof, 㪈㪍㪇 RTIII - wash tight 㪈㪋㪇 Operating Voltage Range Reference Data Vibration resistance (functional) 㪈㪉㪇 10 to 50Hz, 1.5mm double amplitude Shock resistance (functional) 㪈㪇㪇 Hot Coil 3A & 5A Applied IEC 60068-2-27 (half sine) 98m/s2, 11ms 㪏㪇 Terminal type 㪍㪇 L i f e E x pePCB-THT ctancy Cool Coil Hot Coil 0A Applied 3A Type Weight 4g 㪋㪇 㪈㪇㪇 Release Voltage 㪈㪇㪇 Resistance to soldering heat THT 㪉㪇 IEC 60068-2-20 260°C/5s 250 VAC 㪇 㪄㪋㪇 㪄㪊㪇 㪄㪉㪇 㪄㪈㪇 box/1000 㪇 㪈㪇 㪉㪇 㪊㪇 㪋㪇pcs. 㪌㪇 㪍㪇 㪎㪇 㪏㪇 㪐㪇 㪈㪇㪇 Packaging/unit Resistive 㪈 3 㪍 1 㪈 㪌 Contact Current (A) 㪈㪇 㪏 Time (msec) 0.8 2 3.15 㪈㪇 View) Wiring Diagram  (Bottom Time (msec) 6.9 4.7 㪈㪇㪇 0.2 㪈㪉 5A Type Copyright 200 by Tyco Electronics EC K.K. All rights reserved.  Edition : 2/2008 REV. 㪉(unit : mm) Outline Dimensions   PC Board Layouts Dimensions TYCO Electronics EC K.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki , 213-8535, Japan, TEL: 81 44 844 8445] 㪈 㪇 This document is subject to change, Please ca ll local TYCO Electronics for the latest Version.2 - Φ 1.1 㪈 㪈 Operate Time L i f e E x pectancy Operation (x10 4) Operation (x10 4) Initial dielectric strength between open contacts L i f e E x pe750V ctancyrms between contact and coil 4000Vrms 3A Type 㪈㪇㪇 Initial surge withstand voltage 250 VAC between contact and coil 10000V 0.24 0.35 Resistive Initial insulation resistance 1000MΩ Clearance/creepage 㪈㪇 between contact and coil >= 6.3mm standard type 20.4 reinforced type 0.35 >= 8.0mm 11.5 7 4.7 15 Insulation Data Other Data 7 4.7 㪄㪋㪇 㪄㪊㪇 㪄㪉㪇 㪄㪈㪇 㪇 1 㪇 imension. Tolerance ± 0.1mm ± 0.2mm 15 㪉㪇 * Refer to below table for any tolerance not specified in the d Cool Coil 㪍㪇 㪋㪇 7 6.9 4.7 㪏㪇 20.4 11.5 3.15 㪈㪇㪇 Operating Voltage Range 1 㪈㪉㪇 1.1 % of Supplying Voltage to Coil PC Board Layouts 㪈 㪈 㪈 Time (msec) 250 VAC Resistive Operation (x10 4) Operation (x10 4) 250 VAC Resistive 㪊 㪌 㪇㪅㪏 㪈 㪈㪅㪉 㪈㪅㪋 Coil Power (% of Rated Voltage) Contact Current (A) Contact Current (A) Reference Data Copyright 200 by Tyco Electronics EC K.K. All rights reserved.  Edition : 2/2008 REV. TYCO Electronics EC K.K. [3-5-8, Hisamoto Takatsu-ku , 213-8535, Japan, TEL: 81 44 844 L i f e E x peKawasaki ctancy L i f e8445] E x pectancy This document is subject to change, Please ca ll local3A TYCO Electronics for the latest Version. Type 㪈㪇㪇 㪈㪇㪇 㪈㪋㪇 㪈㪉㪇 㪈㪇㪇 Operation (x10 4) % of Supplying Voltage to Coil 㪈㪍㪇 Operating Voltage Range Hot Coil 3A & 5A Applied 㪏㪇 㪍㪇 㪋㪇 Hot Coil 0A Applied Cool Coil Release Voltage 250 VAC Resistive 㪈㪇 㪈 㪇 㪊 Contact Current (A) 㪈㪇 㪉㪇 㪊㪇 㪋㪇 㪌㪇 㪍㪇 㪎㪇 㪏㪇 㪐㪇 㪈㪇㪇 㪈㪇 㪌 㪈 㪊 Contact Current (A) Ambient Temp. ( ) Coil Temperature Rise 㪈㪍㪇 04-2013, Rev. 0413 www.te.com © 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. of Supplying Voltage to Coil 2 㪈㪋㪇 Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, Operating Voltage Range 㪈㪉㪇 terms of the disclaimer and all chapters of application notes and all specifications are 㪈㪇㪇 Hot Coil 3A &at 5A Applied the ‘Definitions’ section, available subject to change. http://relays.te.com/definitions Copyright 200 by㪏㪇Tyco Electronics EC K.K. All rights reserved.  Edition : 2/2008 REV. TYCO Electronics EC K.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki Cool, Coil 213-8535, Japan, TEL: 81 44 844 8445] 㪍㪇 This document is subject to change, Please ca ll local TYCO Electronics for the latest Version. Hot Coil 0A Applied 㪋㪇 Release Voltage 㪉㪇 5A Type 250 VAC Resistive 㪈 㪈 㪉㪇 㪄㪋㪇 㪄㪊㪇 㪄㪉㪇 㪄㪈㪇 㪇 Operation (x10 4) Coil Temperature Rise 㪌 General Purpose Low Power PCB Relays OEG Miniature PCB Relay EJ (Continued) Product code structure Typical product code Type EJ Miniature PCB Relay EJ Version 00 3A 05 5A Poles 1 1 pole Contact arrangement A 1 form A (NO) contact Contact material 4 AgNi Coil version D DC standard 200mW Coil Coil code: please refer to coil versions table Sealing F Flux proof W Wash tight* Electrical feature Blank Standard R Reinforced insulation type without WG EJ 00 -1 A 4 -D 012 -F W WG Product in accordance with IEC 60335-1 (domestic appliances)* S Reinforced insulation type with WG *) Wash tight version and WG version on request. Product code Version Contact Cont.material Coil version Coil voltage Sealing Part number EJ00-1A4-D003-F 3A 1 form A (NO) AgNi 90/10 200mW 3VDC Flux proof 1649595-1 EJ00-1A4-D005-F 5VDC 1649595-2 EJ00-1A4-D006-F 6VDC 1649595-3 EJ00-1A4-D009-F 9VDC 1649595-4 EJ00-1A4-D012-F 12VDC 1649595-5 EJ00-1A4-D018-F 18VDC 1649595-6 EJ00-1A4-D024-F 24VDC 1649595-7 EJ05-1A4-D003-F 5A 3VDC 1649594-1 EJ05-1A4-D005-F 5VDC 1649594-2 EJ05-1A4-D006-F 6VDC 1649594-3 EJ05-1A4-D009-F 9VDC 1649594-4 EJ05-1A4-D012-F 12VDC 1649594-5 EJ05-1A4-D018-F 18VDC 1649594-6 EJ05-1A4-D024-F 24VDC 1649594-7 04-2013, Rev. 0413 www.te.com © 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3