EL7644-000

TMS-CT M i l i t a r y G r a d e C o n t i n u o u s Tu b e HEAT SHRINK IDENTIFICATION SYSTEM Technical Datasheet TTDS-268 Revision 4 - April 2020 TMS-CT Military Grade, Heat Shrink Identification Marker Sleeving for the identification of wires and cables. Made from durable, flame retarded, radiation cross linked heat shrinkable polyolefin. TMS-CT is a thin wall, light weight, fast recovery 3:1 shrink ratio sleeve*, allowing the customer to cover a wide range of cable diameters Suitable for a wide variety of applications including, aerospace, military, industrial, transport and energy. Printed marker sleeves meet the requirements of AS 5942 and MIL 202 Method 215 when used as a complete system, as recommended by TE Connectivity. Refer to TE document 411-121005 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX for the recommended printer/product/ribbon combinations. TMS-CT meets the material requirements of SAE-AMS-DTL-23053/5 Class 1. TMS-CT Heat Shrink Identification Marker Sleeving is available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software. *except 1-1/2 and 2 inch TMS-CT which is 2:1 PAGE 1 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 /// TTDS-268 TMS-CT TECHNICAL DATA SHEET TMS-CT MILITARY GRADE Features • Self-extinguishing, non-flame propagating. Product Compliance • Resistant to key Military and Aerospace fluids (defined by RW-2511). • Military grade performance. • Can be laser marked for superior performance. • Pre-termination Cable Identification. • Sleeve diameters from 2.4mm to 50.8mm TMS-CT fully complies with 2011/65/EU RoHS II directive, and Regulation (EC) number 1907/2006 (REACH) Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: http://www.te.com/usa-en/utilities/productcompliance.html (3/32 to 2inch). • TMS-CT 3:1 Shrink ratio (except 38.1 and 50.8mm which are 2:1). • More open profile for easier use. Temperature Rating Shelf Life • –55°C to 135°C (-67°F to 275°F) • Refer to TE document 408-121006 Cable Identification Shelf Life Document Industry Specifications / Approvals TE Connectivity Standard RW-2511 Specification for TMS-CT products. Rail EN45545-2, Railway applications - Fire protection on railway vehicles, Part 2: Requirements for fire behaviour of materials and components Fire Hazard Classification 1, 2 and 3, in accordance with requirement set R24. NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems, Fire protection requirements, Interior Fire Propagation Resistance. Federal Railroad Administration, DOT, Appendix B to Part 238, Test Methods and Performance Criteria for the Flammability and Smoke Emission Characteristics of Materials used in Passenger Cars and Locomotive Cabs. SHAZAINENNSHI, Japan Railway Rolling Stock & Machinery Association 2003 Classification ‘Flame Retardant’ Serial number 2015-163K. Military SAE-AMS-23053/5 Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked. • Industrial TMS-CT Class 1 Material performance CSA Standard C22.2 No 198.1 Class Number 9032-01 INSULATING DEVICES AND MATERIALS-Insulating Tubing and Sleeving, File reference 31929. TMS-CT uses the same tube as TMS-SCE. UL Certification, Tubing, Extruded Insulating Component File reference YDPU2.E35586. TMS-CT uses the same tube as TMS-SCE Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2511. PAGE 2 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 /// TTDS-268 TMS-CT TECHNICAL DATA SHEET TMS-CT Military Grade Heat Shrink Identification Sleeve Part Description TMS-CT 50M 1/8 -OUT -4 4 Color OUT Spool fits outside printer 1/8 Expanded Inside Diameter (inch) 50M Spool Length (m) TMS- Product Family Available Options Spool Size Colors Spool does not fit inside printers, recommend TE Connectivity PRINTER -UNIVERSAL-REEL-HOLDER, Part Number EC9926-000, reference TTDS-259 OUT Standard Code Yellow White 4 9 Other colors available on request Brown Red Orange Green Blue Violet Grey Black 1 2 3 5 6 7 8 0 To maximise print contrast, colors are based on pastel shades. Ordering Example: TMS-CT-50M-3/16-OUT-9 i.e. Product Family, Spool Length, Expanded Inside Diameter, OUT and Color Ordering Information Inside diameter Ordering description As supplied (minimum) After recovery Recommended cable diameter use Spool lengths range m (ft) (Maximum) mm inches mm inches TMS-CT - -3/32 - OUT- 2.4¹ 0.094 0.8 0.03 0.90 to 1.90 0.035 to 0.075 50 (164) TMS-CT - -1/8 - OUT- 3.2¹ 0.125 1.1 0.04 1.20 to 2.60 0.047 to 0.102 50 (164) TMS-CT - -3/16 - OUT- 4.8¹ 0.189 1.6 0.06 1.70 to 3.84 0.067 to 0.151 50 (164) TMS-CT - -1/4 - OUT- 6.4¹ 0.250 2.1 0.08 2.20 to 5.10 0.087 to 0.201 50 (164) TMS-CT - -3/8 - OUT- 9.5¹ 0.375 3.2 0.13 3.30 to 7.60 0.130 to 0.299 50 (164) TMS-CT - -1/2 - OUT- 12.7¹ 0.500 4.2 0.17 4.30 to 10.2 0.169 to 0.402 50 (164) TMS-CT - -3/4 - OUT- 19.1² 0.750 6.4 0.25 6.50 to 15.3 0.256 to 0.602 50 (164) TMS-CT - - 1 - OUT- 25.4² 1.000 8.5 0.33 8.60 to 20.3 0.339 to 0.799 50 (164) TMS-CT - - 1-1/2- OUT- 38.1³ 1.500 19.1 0.75 19.2 to 30.5 0.756 to 1.201 50 (164) TMS-CT - - 2 - OUT- 50.8³ 2.00 25.4 1.00 25.5 to 40.6 1.004 to 1.598 50 (164) ¹ Recommended ribbon width 40mm— 2000P-RIBBON-4TT-NAR, Part No. 277493-000 ² Recommended ribbon width 60mm— 2000P-RIBBON-4TT-MED, Part No. 893803-000 ³ Recommended ribbon width 110mm— TMS-RJS-RIBBON-4RPSCE, Part No. 557721-000 Check TE Document 411-121005 for full and current details PAGE 3 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 /// TTDS-268 TMS-CT TECHNICAL DATA SHEET mm inches TMS-CT Military Grade Heat Shrink Identification Sleeve Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’. This document can be found in ‘Access Our Tools’: http://www.te.com/usa-en/utilities/access-product-toolsand-resources.html Software WINTOTAL software, available to download for a 14 day evaluation period from the Identification Printer Software page: http://www.te.com/usa-en/products/identification-labeling/ printers-software.html Contact a TE representative for further information www.te.com/rail TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2020 TE Connectivity Ltd. family of companies All Rights Reserved. PAGE 4 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 /// TTDS-268 TMS-CT TECHNICAL DATA SHEET