ES2000-NO.3-B8-0-65MM

Dual Wall Tubing (Adhesive & Encapsulant-Lined) ES2000 Flame-Retardant, HighShrink-Ratio, AdhesiveLined Semirigid Polyolefin Tubing Product Facts n 4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters n Flame-retardant and mechanically tough, the tubing provides strain relief and abrasion protection of wire splices, terminals, and other components n Thick adhesive liner forms an effective barrier against fluids and moisture and performs well at an extended temperature range n UL recognized Heat-Shrinkable Tubing Specifications/Approvals 3 Applications Installation Operating Temperature Range Specially designed for environmental sealing and electrical insulation of wire splices, terminations, and components. Minimum shrink temperature: 110°C [230°F] -40°C to 130°C [-40°F to 266°F] Minimum full recovery temperature: 135°C [275°F] Series UL ES2000 E85381 600 V, 125°C Available in: Americas Raychem  RT-1112 Europe n Asia Pacific n 3-39 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171 Dual Wall Tubing (Adhesive & Encapsulant-Lined) ES2000 (Continued) Product Dimensions Part Number ES2000-No.1 ES2000-No.2 ES2000-No.3 ES2000-No.4 Inside Diameter (Including Core) Minimum Maximum Expanded Recovered After Heating as Supplied 5.72 [0.225] 1.27 [0.050] 7.44 [0.293] 1.65 [0.065] 10.85 [0.427] 2.41 [0.095] 17.78 [0.700] 4.45 [0.175] Minimum Total Wall After Heating 1.20 [0.047] 1.52 [0.060] 1.91 [0.075] 2.41 [0.095] Recovered Wall Thickness* Minimum Minimum Jacket Wall Adhesive Wall After Heating After Heating 0.64 [0.025] 0.56 [0.022] 0.76 [0.030] 0.76 [0.030] 0.89 [0.035] 1.02 [0.040] 1.04 [0.041] 1.37 [0.054] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Size selection Standard packaging Marking Ordering description Standard Black (-0) Always order the largest size that will shrink snugly over the component to be covered. Cut pieces. Tubing will be printed with its numbered size (such as ES-1, ES-2, ES-3, or ES-4). Specify product name, numbered size, color, and cut length (for example, ES2000-NO.2-0-50MM). 3-40 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171