F12169N001

CUSTOMER DRAWING 1 2 Product Name D-150-0228-NR D-150-0229-NR D-150-0230-NR D-150-0231-NR D-150-0232-NR D-150-0233-NR D-150-0234-NR D-150-0235-NR D-150-0236-NR D-150-0237-NR D-150-0238-NR Primary No., Qty/kit 1 1 1 2 2 2 2 3, 4 3, 4 3, 4 3, 4 3 AWG Range Color Code 26-20 20-16 16-12 26-20 18-16 14 12 26-24 22-20 18-16 14-12 Red Blue Yellow Red Blue Yellow Yellow Red Red Blue Yellow L max 80.52 [3.170] 80.52 [3.170] 80.52 [3.170] 105.92 [4.170] 105.92 [4.170] 105.92 [4.170] 105.92 [4.170] 105.92 [4.170] 105.92 [4.170] 105.92 [4.170] 105.92 [4.170] Product Dimensions øD1 A 2.54 min [A ± 0.100] 50.30 [1.970] 3.00 [0.118] 50.30 [1.970] 4.00 [0.157] 50.30 [1.970] 5.00 [0.197] 74.93 [2.950] 4.00 [0.157] 74.93 [2.950] 5.00 [0.197] 74.93 [2.950] 6.00 [0.236] 74.93 [2.950] 9.04 [0.356] 74.93 [2.950] 4.00 [0.157] 74.93 [2.950] 5.00 [0.197] 74.93 [2.950] 6.00 [0.236] 74.93 [2.950] 9.04 [0.356] øD2 min 1.14 [0.045] 1.63 [0.064] 2.46 [0.097] 1.14 [0.045] 1.63 [0.064] 2.46 [0.097] 2.46 [0.097] 1.14 [0.045] 1.14 [0.045] 1.63 [0.064] 2.46 [0.097] øD3 min 2.79 [0.110] 4.32 [0.170] 4.32 [0.170] 2.16 [0.085] 2.79 [0.110] 4.32 [0.170] 4.32 [0.170] 2.16 [0.085] 2.16 [0.085] 2.79 [0.110] 4.32 [0.170] MATERIALS 1. SOLDERSHIELD: INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: gray. SHIELD: Solder impregnated, flux coated, Ni-plated copper braid. Base Metal: Copper per ASTM-B33-04. Finish: Nickel plated per ASTM-B355 Class 4. Solder: TYPE Sn96 per ANSI / J-STD-006. Flux: TYPE ROM1 per ANSI / J-STD-004. 2. CRIMP FERRULE: Nickel-plated copper alloy. (1, 2, or 4 / kit), Color Code: see table. BASE METAL: Copper Alloy 101 or 102 per ASTM B75. PLATING: Nickel per SAE AMS-QQ-N-290. 3. SEALING SLEEVE: (1, 2, or 4 / kit) INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. MELTABLE RINGS: Immersion resistant thermoplastic. APPLICATION 1. These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad cables having nickel-plated conductors and insulations rated for 135C minimum. 2. Temperature rating: -55C to +175C. 3. For installation procedures refer to the applicable sections of Raychem Process Standard RCPS 150-02. Crimp splices with Tyco Electronics AD-1377 crimp tool. = TITLE: Raychem Devices Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A ECO NUMBER: SOLDERSHIELD SPLICE KIT, 1 TO 1 CRIMP SPLICE, SHIELDED CABLE 26 THRU 12 AWG, Ni-PLATED, 1 TO 4 CONDUCTORS DOCUMENT NO.: D-150-0228-NR/-0238-NR Tyco Electronics reserves the right to amend this drawing at any time. Users should REV.: evaluate the suitability of the product for their ROUGHNESS IN application. MICRON REPLACES: CAGE CODE : ANGLES: N/A ECO-17-007080 D060048 © 2005 - 2017 TE Connectivity Corp. All rights reserved. DATE: B1 SCALE: 16-May-2017 SIZE: SHEET: 06090 --A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.