F27532-000

CP - CLEAR POLYESTER LABEL Technical Datasheet TTDS-083 Revision 2 - April 2016 CP is a clear thermal transfer printable polyester film with a permanent acrylic adhesive and a glassine liner. It is ideal for use as an over-laminate to further protect printed labels from chemicals, solvents, abrasion, heat and moisture. Can be supplied in custom formats for thermal transfer printing to generate printed clear labels. TE Connectivity CP was designed for rating plates, nameplates, equipment labels, serial number plates and general labelling applications that require a high durability transparent label. Print performance and durability can only be guaranteed when printed using TE Connectivity printers ribbons and software, as shown in TE Connectivity Printer Ribbon Matrix 411-121005. CP labels are available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL and Print Easy software. PAGE 1 INDUSTRIAL /// TTDS-083 – CP TECHNICAL DATA SHEET CP CLEAR POLYESTER LABEL Features Temperature Rating • Thermal transfer printable • Operating Temperature Range • Ideal for general labeling applications –40°C to 150°C (-40°F to 302°F) • Usable for over-lamination • Minimum Application Temperature 10°C (50°F) Specifications / Approvals Military Specification Meets the requirements of MIL-AA-59485, test method MIL-P-38477A Applications Design for Environment • Rating plates • Does not contain any declarable or prohibited sub- • Name plates • Equipment labels • Serial number plates • General purpose label applications that require a high durability transparent label stances from the UNIFE Railway Industry Substances List • Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: http://www.te.com/usa-en/utilities/productcompliance.html Shelf Life 2 years when following good commercial storage practice detailed below Storage Product should be stored in the original packaging, with any plastic covers which were included during shipping. Store out of direct sunlight in a clean, dry, dust free, environment. Product should not be stored outside of the designed storage temperature, which is -10°C (14°F) to +40°C (104°F). PAGE 2 INDUSTRIAL /// TTDS-083 – CP TECHNICAL DATA SHEET CP Clear Polyester Label Technical Performance Requirement / Method Result Marking Adherence SAE AS 5942, 20 rubs Pass Resistance to Solvents TE test method 109-121012 Pass 24 hours immersion at 23°C followed by mark adherence Requirement for all fluids legible minimum print contrast score C3*, legible. Pass Print Permanence Resistance to TE industrial fluids • • • • • • • • • • Isopropyl alcohol IRM 902 MIL PRF 23699 Skydrol LD4 Pass Pass MIL-H-83282 Pass Diesel Fuel Pass Kilfrost DF plus Pass Tap water Pass 5% Salt solution Detergent (1% Teepol) *Print contrast as defined in TE doc. 411-121002 FTM 1 (180°) 72 hour dwell at 23°C+/- 2°C, 50% RH +/- 5% RH Adhesion to substrates • • • • • Pass Stainless steel Pass Pass Typical adhesion 19 N/25 mm (69.4 oz/in) Pass Glass 19 N/25 mm (69.7 oz/in) Pass Aluminium 13 N/25 mm (45.7 oz/in) Pass Polypropylene 12 N/25 mm (44.6 oz/in) Pass Epoxy Painted Surface 21 N/25 mm (75.5 oz/in) Pass Typical Label Thickness Details • Facestock: 0.05 mm / 0.0020 inch • Adhesive: 0.022 mm / 0.0087 inch • Liner: 0.056 mm / 0.0022 inch Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. PAGE 3 INDUSTRIAL /// TTDS-083 – CP TECHNICAL DATA SHEET CP Clear Polyester Label Part Description CP -762 508 -25 -X X Colour = Clear 25 Pack size 508 Label height (mm) 762 Label width (mm) CP Product family Ordering Information Ordering Description Pack Size Labels Across Label Width A Label Height B (mm) (inches) Horizontal Repeat C (mm) (inches) Vertical repeat D Web Width E CP-165051-25-X 25.000 4 16.5 0.650 5.1 0.200 17.8 0.700 (mm) (inches) (mm) (inches) 8.3 0.325 75.8 2.990 CP-191064-10-X 10.000 4 CP-229064-10-X 10.000 3 19.1 0.750 6.4 0.250 21.6 22.9 0.900 6.4 0.250 28.6 0.850 9.5 0.375 89.9 3.540 1.125 9.5 0.375 86.0 3.390 CP-254097-10-X 10.000 3 25.4 1.000 9.7 0.380 27.9 1.100 12.7 0.500 87.4 3.440 CP-254127-10-X CP-381064-10-X 10.000 3 25.4 1.000 12.7 0.500 10.000 1 38.1 1.500 6.4 0.250 27.9 1.100 16.9 0.666 87.4 3.440 N/A N/A 9.5 0.375 44.5 1.750 CP-381127-5-X 5.000 2 38.1 1.500 12.7 0.500 44.2 1.738 15.9 0.625 88.2 3.472 CP-381191-5-X 5.000 2 38.1 1.500 19.1 0.750 43.2 1.700 22.2 0.875 87.6 3.450 CP-406254-1.5-X 1.500 2 40.6 CP-508127-5-X 5.000 1 50.8 1.600 25.4 1.000 55.9 2.200 38.1 1.500 102.9 4.050 2.000 12.7 0.500 N/A N/A 15.9 0.625 56.9 2.240 CP-508254-5-X 5.000 1 CP-508318-2.5-X 2.500 1 50.8 2.000 25.4 1.000 N/A N/A 28.6 1.125 57.2 2.250 50.8 2.000 31.8 1.250 N/A N/A 34.9 1.375 56.9 CP-699254-5-X 5.000 1 2.240 69.9 2.750 25.4 1.000 N/A N/A 28.6 1.125 76.2 3.000 (mm) (inches) CP-762254-5-X 5.000 1 76.2 3.000 25.4 1.000 N/A N/A 28.6 1.125 82.3 3.240 CP-762508-2.5-X 2.500 1 76.2 3.000 50.8 2.000 N/A N/A 54.0 2.125 82.3 3.240 CP-101635-2.5-X 2.500 1 101.6 4.000 63.5 2.500 N/A N/A 66.7 2.625 107.7 4.240 PAGE 4 INDUSTRIAL /// TTDS-083 – CP TECHNICAL DATA SHEET CP Clear Polyester Label Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’. This document can be found in ‘Access Our Tools’: http://www.te.com/usa-en/utilities/access-product-tools- Software WINTOTAL software, available to download for a 14 day evaluation period from the Identification Printer Software page: http://www.te.com/usa-en/products/identification-labeling/ printers-software/printing-software.html?tab=pgp-story Print Easy software also available Contact a TE representative for further information www.te.com/rail TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. PAGE 5 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 INDUSTRIAL /// TTDS-083 – CP TECHNICAL DATA SHEET