F80644-000

SPECIFICATION CONTROL DRAWING Product Rev Product Name Product Dimensions L øA max min B-600-31 N/C 93.00 (3.660) 5.50 (0.217) B-600-32 N/C 93.00 (3.660) 7.00 (0.276) B-600-33 N/C 108.00 (4.250) 9.00 (0.354) B-600-34 N/C 108.00 (4.250) 11.00 (0.433) B-600-35 N/C 108.00 (4.250) 13.50 (0.531) Cable Dimensions øF M min min øE 2.40 (0.094) to 3.80 (0.150) 3.40 (0.134) to 5.00 (0.197) 4.50 (0.177) to 7.00 (0.276) 6.50 (0.256) to 9.50 (0.374) 9.00 (354) to 12.70 (0.500) N max 2.40 (0.094) 15.00 (0.590) 83.00 (3.270) 3.50 (0.137) 15.00 (0.590) 83.00 (3.270) 4.50 (0.177) 15.00 (0.590) 83.00 (3.270) 6.50 (0.256) 15.00 (0.590) 83.00 (3.270) 9.00 (0.354) 15.00 (0.590) 83.00 (3.270) MATERIALS 1 INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SHIELD: Tin plated copper braid, fluxed and tinned at both ends. 3. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. APPLICATION 1. These parts are designed to provide an in-line splice between the shield of cables, rated for 135°C minimum, meeting the dimensional criteria listed, having tin or silver-plated copper shields. 2. Temperature range: -55°C to +150°C. 3. Install using Tyco Electronics/Raychem-approved convection or infrared heating tools. For best results, prepare the cable as shown: Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS Title: SOLDERSHIELF SPLICE KIT, FLEXIBLE, SINGLE SHIELD Document No. DRAWN BY: CAGE CODE: Org. Date: File name: mforonda 06090 13-Jun-03 D030317 If this document is printed it becomes uncontrolled. Check for the latest revision. B-600-3X Rev.: Rev. Date: 1 13-Jun-03 SCALE: None SIZE: A SHEET: 1 of 1