FCR2010J33R

Fusible Chip Resistors Type FCR Series Key Features n Chip resistors with known fusible characteristics. These resistors will not produce flames or smoke during fusing n Suitable for battery operated circuits n Case sizes 0603, 0805, 1206, 1210 and 2010 n FCR chip resistors are suitable for most applications, including high frequency operation Precious metal terminations are screen printed onto a ceramic base and fired. The resistive element is screen printed and fired and the passivation layer added. Each resistor is trimmed to tolerance by sand blasting. The prescribed tile is broken into strips, the end plating is fired on and the strips broken into individual components. Final termination is made by electroplating. Characteristics - Electrical Rated Wattage (70°C) (W) Tolerance (%) Resistance Range E-24 Series Standard (Ω) TCR (ppm/°C) 0603 0.063 J ±5 5.6 ~ 33 ±500 10 ~ 100 2.00 0805 0.100 J ±5 10 ~ 82 ±500 10 ~ 100 2.50 1206 0.125 J ±5 10 ~ 82 ±500 10 ~ 100 2.50 3.75 3.00 4.50 Resistance (Ω) 1210 0.250 J ±5 10 ~ 300 ±500 10 ~ 27 30 ~ 300 2010 0.500 J ±5 10 ~ 100 ±500 10 ~ 100 Fusing Characteristic Fusing Power Fusing Time (W) (sec.) 1