FLHTC0311-14-6

Specification Control Drawing HIGH TEMPERATURE HOOKUP WIRE, TIN PLATED COPPER, RADIATION-CROSSLINKED, MODIFIED ETFE INSULATED, 200°C, 600 VOLT FLHTC0311 Issue 7 28th March 2013 The complete requirements for procuring the wire described herein shall consist of this document, the issue in effect of Test Regime WSD 3106 (UK), WCD3106, UL Subject 758, Style 3557, File E38136 and carries UL labels to this effect. Page 2 is for internal use only Conductor Tin Plated Copper Part Description Nominal CSA (mm²) Conductor Stranding No./ Diam. (mm) FLHTC0311-0.25-* FLHTC0311-0.35-* FLHTC0311-0.50-* FLHTC0311-0.75-* FLHTC0311-1.00-* FLHTC0311-1.50-* FLHTC0311-2.00-* FLHTC0311-2.50-* 0.25 0.35 0.50 0.75 1.00 1.50 2.00 2.50 19/0.13 19/0.15 19/0.19 19/0.23 19/0.25 19/0.32 19/0.36 19/0.41 Jacket Radiation Crosslinked Modified ETFE Conductor Diameter (mm) Min. 0.55 0.74 0.86 1.05 1.17 1.35 1.66 1.85 Max. 0.63 0.76 0.88 1.08 1.26 1.58 1.79 2.01 Maximum Resistance @ 20°C (ohms/ km) 83.3 52.2 40.1 24.7 20.0 13.7 9.7 8.2 FINISHED WIRE Crosslink Diameter (mm) Nominal Verification Test Lower Upper Weight Spec Target Spec (kg/ km) Mandrel OD Weight Limit Limit (mm) (±3%) (kg) (±3%) 0.96 1.00 1.03 2.95 9.5 0.23 1.12 1.16 1.19 4.22 13 0.36 1.24 1.27 1.31 5.59 13 0.50 1.43 1.47 1.51 7.95 13 0.50 1.58 1.62 1.66 9.9 13 0.50 1.82 1.87 1.92 15.7 19 0.68 2.05 2.10 2.16 18.7 25 0.91 2.24 2.31 2.38 24.6 38 1.36 PART DESCRIPTION: The '*' in the part description shall be replaced by a standard colour code designator, e.g. FLHTC0311-1.50-9 is 1.50mm², white insulation INSULATION THICKNESS: Sizes 0.25 - 2.00 Size 2.50 0.15 mm minimum; 0.165 mm (minimum average) 0.165 mm minimum; 0.178 mm (minimum average) ADDITIONAL REQUIREMENTS: Crosslink Verification: Time/ temperature - WCD3106 clause 3.3.4; voltage withstand - 2.5 kV; mandrels and weights as shown Insulation Tensile Strength: Insulation Elongation: 37.7 N/mm² minimum 100% minimum Deformation Test: Shrinkage: Insulation Resistance: To UL Factory Inspection Procedure, Subject 758 (Page 40), Style 3557 at 200°C T2/ T1 minimum = 0.80 7 days @ 232°C; Insulation elongation 60% minimum, Insulation Tensile Strength 34.5 N/mm² minimum 3 mm maximum at each end at 200°C/ 1 hour 1524 Mohm.km minimum Spark Test: 8.0 kV Impulse Thermal Stability: Tyco Electronics UK Ltd Faraday Road Dorcan SWINDON SN3 5HH Tel: +44 (0)1793 528171 Fax: +44 (0)1793 572516 TE TEConnectivity Connectivityis isaatrading tradingname nameof ofTyco Tyco Electronics ElectronicsUK UKLtd, Ltd,which whichis isregistered registeredin in England Englandand andWales, Wales,number number550926. 550926. Registered Registeredoffice: office:Faraday FaradayRoad, Road,Dorcan, Dorcan, Swindon,SN3 SN35HH 5HH Swindon, Website: www.te.com Website: Page 1 of 2 This drawing and the information set forth hereon are the property of Tyco Electronics UK Ltd, and are to be held in trust and confidence. Publication, duplication, disclosure or use for any purpose not expressly authorised in writing by Tyco Electronics UK Ltd is prohibited. This specification sheet takes precedence over documents referenced herein. As Tyco Electronics UK Ltd. reserve the right to make changes in construction without notice please contact Tyco Electronics UK Ltd to ensure that this document is the latest issue. ©2013 Tyco Electronics UK Ltd, a TE Connectivity Ltd. company. All Rights Reserved.