FPP800A110

FPS2800B12C4 Fluid Property Sensor SPECIFICATIONS     FEATURES     Rugged construction for high pressure and high flow environments Proprietary corrosion and contaminant resistant coating for wetted parts On-board microprocessor for real-time data analysis with 12 - 24 volts supply Highly reliable and long term stability APPLICATIONS      On and Off Highway Vehicles HVAC&R Compressors Industrial Equipments Turbines SENSOR SOLUTIONS /// FPS2800B12C4 FPC012 Rev M Fully integrated, stand-alone module combines sensor and processing electronics Accurate, repeatable temperature, viscosity, density and dielectric constant Factory calibrated with NIST traceable fluids Digital output as per J1939, CAN2.0B standard or CAN2.0A featuring high-resolution parameter readings The FPS2800B12C4 is a novel fluid property sensor that will directly and simultaneously measure the viscosity, density, dielectric constant and temperature of fluids. Relying on patented tuning fork technology, the sensor monitors the direct and dynamic relationship between multiple physical properties to determine the quality, condition and contaminant loading of fluids such as engine oil, fuel, transmission and brake fluid, hydraulic and gear oils, refrigerants and solvents. The multi-parametric analysis capability improves fluid characterization algorithms. The FPS provides in-line monitoring of fluids for a wide range of OEM and aftermarket installations including fluid reservoirs, process lines and pressurized high flow conduits (e.g., engine oil gallery) for applications that include on and off highway vehicles, HVAC&R, compressors, industrial equipment and turbines. A universal digital CAN J1939 compliant protocol provides easy to connect interface to main Host controller. A simple 4 pin connector allows for cost effective mounting options. 9/2015 Page 1 FPS2800B12C4 Fluid Property Sensor PERFORMANCE SPECIFICATIONS MAXIMUM RATINGS Ratings Supply Voltage (Peak) Ambient Operating Temperature (electronics)* Ambient Operating Temperature (fluid)* Storage Temperature** Input Current @12Vdc (In rush) Operating Pressure Vibration (Peak) Symbol Vcc Te Tf Tstg Imax P Value 60 -40 to +125 -40 to +150 -50 to +150 < 200 25 (Note 1) 20 Unit Vdc °C °C °C mA Bars Grms Peak conditions: less than 10% of the operating time. NOTE: 1 Elevated pressure ratings are available, contact MEAS France for specs. * Ambient Operating Temperature: Service temperature range at which the sensor and its electronics can operate securely. ** Storage Temperature: Temperature range at which the sensor can be stored with no risk of damage. METROLOGICAL CHARACTERISTICS (@Vcc=12Vdc, T=100°C, unless otherwise noted) Multi-Parametric Measurement Ranges Viscosity (dynamic) Viscosity (dynamic) Accuracy for viscosity > 10 mPa-s (cP) Viscosity (dynamic) Accuracy for viscosity < 10 mPa-s (cP) Density Density Accuracy Dielectric Constant Dielectric Constant Accuracy Fluid Temperature Temperature Accuracy Symbol  Min Typ Max Unit 0.5 -5 50 +5 ρ 0.65 -3 1.0 -3 -40 15 +/-2 +/- 0.2 0.85 +/-1 2.0 +/- 1 mPa-s (cP) % Value mPa-s (cP) gm/cc % Value % Value °C °C ε T T 1.50 +3 6.0 +3 150 0.1 ELECTRICAL CHARACTERISTICS (@Vcc=12Vdc, T=100°C, unless otherwise noted) Electrical Characteristics Symbol Min Typ Max Unit Supply Voltage Supply Current (steady state) Vcc Iavg 9 12 70 36 100 Vdc mA BLOCK DIAGRAM SENSOR SOLUTIONS /// FPS2800B12C4 FPC012 Rev M 9/2015 Page 2 FPS2800B12C4 Fluid Property Sensor TRANSMISSION DATA Viscosity Data Range (mPa-s) Limits (DATA) Min Typ 0.0 1003.9 0x0000 0xFAF9 Resolution (mPa-s per bit) 0.015625 Update period (s) Density Data Range (gm/cc) Limits (DATA) 30 Min Typ 0.000 Max 1.9608 0x0000 Resolution (gm/cc per bit) 0xFAF6 0.00003052 Update period (s) Dielectric Constant Max 30 Min Typ Max Data Range (-) 0.00 7.842 Limits (DATA) 0x0000 0xFAF1 Resolution (- per bit) 0.00012207 Update period (s) Temperature 30 Min Data Range (°C) -273.0 Limits (DATA) 0x0000 Typ Max +1735 0xFB00 Resolution (°C per bit) 0.03125 Update period (s) 30 SELF DIAGNOSTIC Status message code Tuning Fork – impedance below normal or shorted to ground Tuning Fork – impedance above normal or sensor damaged Tuning Fork – ASIC over temperature conditions Fit – simplex algorithm failed to converge RTD – resistance below normal or shorted to ground RTD – resistance above normal or sensor damaged RTD – sensor temperature over temperature conditions Internal – system error Bit position 1 2 3 4 5 6 7 8 Diagnostic bit is set to ‘1’ when error is detected SENSOR SOLUTIONS /// FPS2800B12C4 FPC012 Rev M 9/2015 Page 3 FPS2800B12C4 Fluid Property Sensor FPS2800 Standard SPN and Standard PGN Parameter Dynamic Viscosity Density Dielectric Constant Oil Temperature Sensor Status code message SPN 5055 5056 5468 175 N/A PGN 64776 64776 64776 65262 65329 Byte Position 1 3 7 3 1 Length (byte) 2 2 2 2 1 No delay is required between command write and data read. CAN transmission Baudrate = 250kbps CONNECTING & MECHANICAL PACKAGING PINOUT ASSIGNMENT (SUBJECT TO FURTHER CONFIRMATION) N0 1 2 3 4 Function CAN_H CAN_L GND – Ground VCC – Voltage Supply MECHANICAL CHARACTERISTICS: FPS2800B12C4 PACKAGE OUTLINE All dimensions are millimeters (mm). Mating connector type is FCI female receptacle ref. 54200409 (blacksealed). Sensor body is stainless steel. M14 Viton O’ring provided for hermetical mounting. NOTE: For installation details, please refer to the MEAS France FPS Installation Guide – FPC013. SENSOR SOLUTIONS /// FPS2800B12C4 FPC012 Rev M 9/2015 Page 4 FPS2800B12C4 Fluid Property Sensor FPS OPTIONAL PARTS The FPS can be provided with  A CAN Viewer Software which allows to visualize the measured values with a PC  A CAN-USB interface, which enables communication between PC and FPS  A Mating connector with pigtail wires These parts should be ordered on purchase. RESISTANCE TO PHYSICAL AND CHEMICAL STRESSES      FPS2800B12C4 contains circuits to protect its inputs and outputs against Electrostatic discharges (ESD) up to 25kV (air discharge) FPS2800B12C4 is protected against EMC interferences (SAE J1113-4) FPS2800B12C4 is protected against reverse polarity FPS2800B12C4 is cross wire protected Additional tests under harsh chemical conditions demonstrate good operation in presence of 5% nitric acid, soot, fuel, water, oxidized oil, a non-exhaustive list NOTE: This FPS and its use may be covered by one or more patents, including US Patents 6,957,565; 6,873,916; 6,494,079; 6,336,353; 7,043,969 and other pending US and worldwide patents. ORDERING INFORMATION Part Number for the Generic Version is FPP800A110. For any specific application, please contact MEAS. * The FPS2810B12C4 has been replaced by the FPS2800B12C4. * Without specification, each order will be delivered with the Generic version of the FPS2800B12C4 (Calibration point at medium viscosity and medium temperature). EUROPE MEAS France SAS a TE Connectivity Company Impasse Jeanne Benozzi CS 83 163 31027 Toulouse Cedex 3 FRANCE Tél: +33 (0) 5 820 822 02 Fax:+33 (0) 5 820 821 51 Sales: fluid.sales@meas-spec.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. SENSOR SOLUTIONS /// FPS2800B12C4 FPC012 Rev M 9/2015 Page 5