H-16C

KILOVAC High Voltage Relays H-14/16 Series Make & Break Load Switching — 12 kV Relays H-14 Product Facts for H-14 n Double pole, double throw contacts n Vacuum dielectric for power switching low current loads n 30 Amps DC continuous current rating n Corona shield high voltage terminals available n Meets requirements of MIL-R-83725 H-16 Product Facts for H-16 n 12 kV rating; isolates 5 kV at 32 MHz n Vacuum dielectric for power switching low current loads n Double pole, double throw contacts n Widely used as a transmit/receive switch n Meets requirements of MIL-R-83725 Product Specifications for H-14 and H-16 For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Coil Data Nominal Volts DC Pickup, Max. Dropout Coil Resistance (±10%) 12 Vdc 8 Vdc .5-5 Vdc 24 Ω 26.5 Vdc 16 Vdc 1-10 Vdc 120 Ω 115 Vdc 80 Vdc 5-50 Vdc 2000 Ω Ratings listed are for 25°C, sea level conditions 7 KILOVAC High Voltage Relays Contact Arrangement — DPDT Contact Form — 2C Test Voltage, DC or 60 Hz (Peak) — 15 kV Rated Operating Voltage (Peak) — DC or 60 Hz — 12 kV 2.5 MHz — 10 kV 16 MHz — 8 kV 32 MHz — 5 kV Continuous Carry Current, Max. — DC or 60 Hz — 30 A 2.5 MHz — H-14 — 15 A H-16 — 10 A 16 MHz — H-14 — 10 A H-16 — 6 A 32 MHz — H-14 — 8 A H-16 — 4 A Coil Hi-Pot (Vrms, 60 Hz) — 500 A Contact Capacitance — Between Open Contacts — 1 pF Open Contacts to Ground — 2.5 pF Contact Resistance, Max. — H-14 — 0.015 ohm H-16 — 0.03 ohm Operate Time, Max. — 20 ms Release Time, Max. — 20 ms Shock, 11ms, 1/2 Sine (Peak) — 20 g Vibration — Peak — 10 g (55 to 500 Hz) Operating Ambient Temperature Range — -55°C to +125°C Mechanical Life (Operations x 106) — H-14 — 1 million cycles H-16 — 500,000 cycles Weight, Nominal — H-14 — 226.8 g (8 oz.) H-16 — 170.1 g (6 oz.) Ordering Information Sample Part Number 䊳 H- 14 /12Vdc Series: Model: 14 16 Coil Voltage: Blank = 26.5 Vdc /12Vdc = 12 Vdc /115Vdc = 115 Vdc 7–71 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com