H-17

KILOVAC High Voltage Relays H-19/17 Series Make & Break Load Switching — 20/25 kV Relays H-19 Product Facts n 20 kV operating voltage n Vacuum dielectric and tungsten contacts for power switching low current loads n Double pole, double throw contacts n Available with corona shield connectors n Meets requirements of MIL-R-83725 H-17 Product Facts n Will isolate 12 kV at 32 MHz n Tungsten contacts suitable for power switching low current loads n Available with corona shield connectors n Meets requirements of MIL-R-83725 n QPL version available, M83725/2 Product Specifications for H-19 and H-17 For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Coil Data Nominal Volts DC Pickup, Max. Dropout Coil Resistance (±10%) H-19 H-17 12 Vdc 8 Vdc .5-5 Vdc 26.5 Vdc 16 Vdc 1-10 Vdc 115 Vdc 80 Vdc 5-50 Vdc 48 Ω 24 Ω 225 Ω 120 Ω 2100 Ω 2900 Ω Ratings listed are for 25°C, sea level conditions 7 KILOVAC High Voltage Relays Contact Arrangement — H-19 — DPDT H-17 — SPDT Contact Form — H-19 — 2C H-17 — C Test Voltage, DC or 60 Hz (Peak) — H-19 — 25 kV H-17 — 30 kV Rated Operating Voltage (Peak) — DC or 60 Hz — H-19 — 20 kV H-17 — 25 kV 2.5 MHz — H-19 — 15 kV H-17 — 20 kV 16 MHz — H-19 — 10 kV H-17 — 15 kV 32 MHz — H-19 — 7 kV H-17 — 12 kV Continuous Carry Current, Max. — DC or 60 Hz — 30 A 2.5 MHz — H-19 — 18 A H-17 — 16 A 16 MHz — H-19 — 9 A H-17 — 10 A 32 MHz — H-19 — 6 A H-17 — 8 A Coil Hi-Pot (Vrms, 60 Hz) — 500 A Contact Capacitance — Between Open Contacts — 1 pF Open Contacts to Ground — 2.5 pF Contact Resistance, Max. — 0.015 ohm Operate Time, Max. — H-19 — 30 ms H-17 — 25 ms Release Time, Max. — H-19 — 20 ms H-17 — 25 ms Shock, 11ms, 1/2 Sine (Peak) — H-19 — 30 g H-17 — 20 g Vibration — Peak — 10 g (55 to 500 Hz) Operating Ambient Temperature Range — -55°C to +125°C Mechanical Life — 1 million cycles Weight, Nominal — H-19 — 241 g (8.5 oz.) H-17 — 198.4 g (7 oz.) Ordering Information Sample Part Number 䊳 H- 17 /12Vdc Series: Model: H-19 H-17 Coil Voltage: Blank = 26.5 Vdc /12Vdc = 12 Vdc /115Vdc = 115 Vdc 7–77 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com