HB120MFZRE

High Value / High Voltage Resistors Type HB Series Key Features I Up to 15kV Element Voltage • Unique specification for the most demanding applications I High Ratio of Size to Power • The solution to your PCB population problems I 1kW to 1GW • Coupled with 1% tolerance gives ultimate design flexibility I Established Product with Proven Reliability I Low Inductance • For the fastest switching speeds Applications I High Voltage I Voltage Divider I Surge I Filter I Balancing I Inrush Limiting TE Connectivity (TE) is a leading supplier of standard and custom designed high value/high voltage resistors for high voltage, industrial, control, medical and general-purpose use. The HB is a tough epoxy coated high voltage resistor, with axial or radial leads, values up to 1G Ohm and an operational voltage to 20kV as standard and 30kV to order. The resistors are made from quality materials for optimum reliability and stability. TE can test resistors to conform to relevant international, MIL or customer specifications. TE is happy to advise on the use of resistors for high frequency applications and to supply information for high voltage use. Characteristics - Electrical Power Dissipation - Power @ 20°C (W): @ 70°C: Ohmic Value - Min (Ohms): Max: Resistance Tolerance (%) (Tighter By Request): Maximum Working Voltage - DC or ACrms (Volts): Insulation Resistance - Epoxy Coated, @500V dc (Ohms): Load Stability - 1000hr’s @ 70°C (%): Temp. Rapid Change - -55°C to 125°C for 5 cycles (ΔR): Endurance - 1000 Hours @ 200°C (ΔR): Resistance to Soldering Heat - 350°C for 3.5seconds (ΔR): Temperature Coefficient (ppm/°C): (±20ppm/°C available to special order) Voltage Coefficient: HBA 0.8 0.4 1K 120M 1%, 2%, 5% 1kV >106MΩ ±0.5% ±0.1% 106MΩ ±0.5% ±0.1% 106MΩ ±0.5% ±0.1%