KILOVAC High Voltage Relays
HC Series — 3.5 kV Relays
HC-1
No Load Switching
HC-3
Make & Break Load
Switching
Product Facts for HC-1
n
Widely used for RF
applications
n
Vacuum dielectric for low
leakage current applications
n
Copper contacts for high
current capability
n
Not designed for power
switching
n
Meets requirements of
MIL-R-83725
n
QPL version available,
M83725/5-001
Product Facts for HC-3
n Tungsten contacts for
long life when power
switching
n
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
Vacuum dielectric for power
switching low current loads
HC-5
Make Only Load Switching
Product Facts for HC-5
n
Gas-filled for “make only”
power switching
n
SF-6 gas-filled for
capacitive discharge
applications
n
Tungsten contacts for
long life when power
switching
Product Specifications for
HC-1, HC-3 and HC-5
Contact Arrangement — SPDT
Contact Form — C
Test Voltage, DC or 60 Hz (Peak) —
5 kV
Rated Operating Voltage (Peak) —
DC or 60 Hz — 3.5 kV
2.5 MHz — 2.5 kV
16 MHz — 2 kV
32 MHz — 1.5 kV
Continuous Carry Current, Max. —
DC or 60 Hz — HC-1 — 25 A
HC-3 — 18 A
HC-5 — 8 A
2.5 MHz — HC-1 — 14 A
16 MHz — HC-1 — 9 A
32 MHz — HC-1 — 7 A
Coil Hi-Pot (Vrms, 60 Hz) — 500 A
Contact Capacitance —
Between Open Contacts —
HC-1 —2 pF
Open Contacts to Ground —
HC-1 —2.5 pF
Contact Resistance, Max. —
HC-1 — 0.01 ohm
HC-3 — 0.02 ohm
HC-5 — 0.50 ohm*
Operate Time, Max. — 6 ms
Release Time, Max. — 6 ms
Shock, 11ms, 1/2 Sine (Peak) —
50 g
Vibration —
Peak — 10 g (55 to 2000 Hz)
Operating Ambient Temperature
Range — -55°C to +125°C
Mechanical Life —
HC-1, HC-3 — 2 million cycles
HC-5 — 1 million cycles
Weight, Nominal —
28.35 g (1.0 oz.)
Note:
*Contact resistance for gas-filled
relays is measured at 28 Vdc, 1
Amp
Coil Data
Nominal Volts DC
Pickup, Max.
Dropout
Coil Resistance (±10%)
12 Vdc
8 Vdc
.5-5 Vdc
80 Ω
26.5 Vdc
16 Vdc
1-10 Vdc
335 Ω
115 Vdc
80 Vdc
5-50 Vdc
6000 Ω
Ratings listed are for 25°C, sea level conditions
Ordering Information
Sample Part Number 䊳
HC- 1 /12Vdc
Series:
Model:
1
3
5
Coil Voltage:
Blank = 26.5 Vdc
/12Vdc = 12 Vdc
/115Vdc = 115 Vdc
7–58
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
KILOVAC High Voltage Relays
HC Series — 8 kV Relays
HC-2
No Load Switching
HC-4
Make & Break Load
Switching
Product Facts for HC-2
n
Vacuum dielectric and
copper contacts for high
current carry rating of 25
Amps
n
Not designed for power
switching
n
Stable, low contact
resistance
n
Product Facts for HC-4
n
Tungsten contacts for long
life in power switching
applications
n
Vacuum dielectric for arc
suppression when making
or breaking a load
Meets requirements of
MIL-R-83725
n
Meets requirements of
MIL-R-83725
HC-6
Make Only Load Switching
Product Facts for HC-6
n
Tungsten contacts for
switching high in-rush loads
n
SF-6 gas-filled for
capacitive discharge
applications
n
Suitable for ESD testing
applications
n
Tungsten contacts for long
life in power switching
applications
Product Specifications for
HC-2, HC-4 and HC-6
Contact Arrangement — SPDT
Contact Form — C
Test Voltage, DC or 60 Hz (Peak) —
10 kV
Rated Operating Voltage (Peak) —
DC or 60 Hz — 8 kV
Continuous Carry Current, Max. —
DC or 60 Hz — HC-2 — 25 A RMS
HC-4 — 15 A RMS
HC-6 — 8 A RMS
Coil Hi-Pot (Vrms, 60 Hz) — 500 A RMS
Contact Capacitance —
Between Open Contacts — N/A
Open Contacts to Ground — N/A
Contact Resistance, Max. —
HC-2 — 0.01 ohm
HC-4 — 0.02 ohm
HC-6 — 0.5 ohm*
Operate Time, Max. — 6 ms
Release Time, Max. — 6 ms
Shock, 11ms, 1/2 Sine (Peak) —
50 g
Vibration —
Peak — 10 g (55 to 2000 Hz)
Operating Ambient Temperature
Range — -55°C to +125°C
Mechanical Life —
HC-2 and HC-4 — 2 million cycles
HC-6 — 1 million cycle
Weight, Nominal —
39.69 g (1.4 oz.)
*Contact resistance for gas-filled
relays is measured at 28 Vdc, 1 Amp
Coil Data
Nominal Volts DC
Pickup, Max.
Dropout
Coil Resistance (±10%)
12 Vdc
8 Vdc
.5-5 Vdc
80 Ω
26.5 Vdc
16 Vdc
1-10 Vdc
335 Ω
115 Vdc
80 Vdc
5-50 Vdc
6000 Ω
Ratings listed are for 25°C, sea level conditions
Ordering Information
HC- 6 /12Vdc
Sample Part Number 䊳
Series:
Model:
2
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
4
6
Coil Voltage:
Blank = 26.5 Vdc
/12Vdc = 12 Vdc
/115Vdc = 115 Vdc
7–64
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
很抱歉,暂时无法提供与“HC-1/12VDC”相匹配的价格&库存,您可以联系我们找货
免费人工找货