HEX40-AC-00-11-A2-3

REVISED PER ECO-12-013789 CUSTOMER DRAWING DATE: C July 26, 2012 54.5 [2.15"] MAX øC TYP øA THREAD TYP øB MAX TYP O RING - SILICONE TYP REV: STRAIGHT ADAPTOR -00 3 1 2 4 F MAX D MAX E M G MAX AX 45º ADAPTOR -45 90º ADAPTOR -90 2012 Tyco Electronics Corporation. All rights reserved. TITLE: Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS (BANDSTRAP CLAMPING NUT) DOCUMENT NO. HEX40-AY-YY-YY-AYY-3-YY FILE-UK: SCALE: SHEET: Hex40-3scd-us NONE 1 OF 4 If this document is printed it becomes uncontrolled. Check with the web for the latest revision. REVISED PER ECO-12-013789 CUSTOMER DRAWING REV: DATE: C July 26, 2012 KIT DESCRIPTION ITEM 1 2 3 4 DESCRIPTION BODY ASSEMBLY CLAMPING NUT ASSEMBLY – BANDSTRAP CONIC RING STAR MATERIAL ALUMINIUM ALLOY ALUMINIUM ALLOY/STAINLESS STEEL ALUMINIUM ALLOY ALUMINIUM ALLOY TABLE OF DIMENSIONS Order Number Shell Size ØA Thread Class 6H ØB Max 19.0 [0.75”] 22.0 [0.87”] 25.5 [1.00”] 30.5 [1.20”] 33.5 [1.32”] 37.0 [1.46”] 38.5 [1.52”] 42.0 [1.65”] 46.5 [1.83”] 09 Mil. A Com. 09 M12 x 1 11 B 11 M15 x 1 13 C 13 M18 x 1 15 D 15 M22 x 1 17 E 17 M25 x 1 19 F 19 M28 x 1 21 G 21 M31 x 1 23 H 23 M34 x 1 25 J 25 M37 x 1 ØC 0.10 [.004”] 8.00 [0.315”] 13.5 [0.531”] 15.00 [0.591”] 18.00 [0.709”] 21.00 [0.827”] 24.00 [0.945”] 27.00 [1.063”] 30.00 [1.181”] 33.00 [1.299”] D Max E Max F Max G Max 12.5 [0.49”] 13.0 [0.51”] 14.0 [0.55”] 14.5 [0.57”] 15.0 [0.59”] 15.5 [0.61”] 16.5 [0.65”] 17.0 [0.67”] 18.0 [0.71”] 55.5 [2.17”] 56.0 [2.20”] 56.5 [2.22”] 57.5 [2.26”] 58.0 [2.28”] 58.5 [2.30”] 59.0 [2.32”] 60.0 [2.36”] 61.0 [2.40”] 16.0 [0.63”] 17.5 [0.69”] 19.0 [0.75”] 20.5 [0.81”] 22.0 [0.87”] 23.5 [0.93”] 25.5 [1.00”] 27.0 [1.06”] 28.5 [1.12”] 57.0 [2.24”] 58.5 [2.30”] 61.5 [2.42”] 63.5 [2.50”] 65.0 [2.56”] 66.0 [2.60”] 67.5 [2.66”] 69.5 [2.74”] 71.0 [2.80”] Ferrule Quantity Std. Opt. 1 2 - 3 - 5 - 6 7 7 8 9 11 10 13 12 17 2012 Tyco Electronics Corporation. All rights reserved. TITLE: Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS (BANDSTRAP CLAMPING NUT) DOCUMENT NO. HEX40-AY-YY-YY-AYY-3-YY FILE-UK: SCALE: SHEET: Hex40-3scd-us NONE 2 OF 4 If this document is printed it becomes uncontrolled. Check with the web for the latest revision. REVISED PER ECO-12-013789 CUSTOMER DRAWING REV: DATE: C July 26, 2012 PART NUMBERING HEX40 A B 00 21 A9 3 DS - CONNECTOR CODE NUMBER HEX40 = MIL-C-38999 SERIES III AND IV - MATERIAL CODE: A = ALUMINIUM ALLOY - PLATING CODE: B = CADMIUM OLIVE DRAB TO QQ-P416 C = ELECTROLESS NICKEL TO MIL-C-26074 - BODY STYLE 00 = STRAIGHT 45 = 45º 90 = 90º - ORDER NUMBER - FERRULE QUANTITY CODE - 3 = BANDSTRAP CLAMPING NUT - DS = DRILLED STAR - OPTIONAL - SEE NOTE 2 APPLICATION - These adaptors are designed to be mounted on the following connectors: MIL-C-38999 Series III and IV - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installation having an overall braid, but are also designed to accept Raychem heat shrink moulded parts where strain relief is required – see illustration. MOULDED PART - Use in conjunction with the ferrules HET-A-***, which are purchased separately. Refer to HET-A-*** S.C.D. for relevant selection details. 2012 Tyco Electronics Corporation. All rights reserved. TITLE: Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS (BANDSTRAP CLAMPING NUT) DOCUMENT NO. HEX40-AY-YY-YY-AYY-3-YY FILE-UK: SCALE: SHEET: Hex40-3scd-us NONE 3 OF 4 If this document is printed it becomes uncontrolled. Check with the web for the latest revision. REVISED PER ECO-12-013789 CUSTOMER DRAWING REV: DATE: C July 26, 2012 INSTALLATION - See Installation Procedure RPIP-696-04. PACKAGING - All components are supplied in a plastic bag. NOTES! 1. Item 4 - Star - is not supplied with Hexashield Order Number 09. ø T MAX 2. The DS option, illustrated below, is for a Drilled Star that is available on sizes 15 to 25 only. This option is to allow unshielded wires to pass through the assembly. STAR SIZE ØT MAX 15 3.5 [0.14”] 17 6.5 [0.26”] 19 9.5 [0.37”] 21 12.5 [0.48”] 23 15.5 [0.61”] 25 18.5 [0.73”] 3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard. If the optional quantity is selected then 2 items 4 will be supplied - one “split” and the other one standard. See below for illustration. EXAMPLE: FERRULE QUANTITY CODE -A13 -A13 = -A10 SPLIT STAR + -A3 STANDARD STAR * On Order Number 19 only, the Optional Ferrule quantity of 8 uses a “standard” star also. 4. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX40-AB-00-21-A9-3) 2012 Tyco Electronics Corporation. All rights reserved. TITLE: Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS (BANDSTRAP CLAMPING NUT) DOCUMENT NO. HEX40-AY-YY-YY-AYY-3-YY FILE-UK: SCALE: SHEET: Hex40-3scd-us NONE 4 OF 4 If this document is printed it becomes uncontrolled. Check with the web for the latest revision.