HEX40L-KC-90-11-A2-1

CUSTOMER DRAWING REV: DATE: B July 26, 2012 2012 Tyco Electronics Corporation. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS PLAIN CLAMPING NUT Raychem Harnessing 300 Constitution Drive Menlo Park CA, 94025 U.S.A. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: DATE: REVISED PER# IRT May 20, 2008 06090 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision. DOCUMENT NO. HEX40L-KC-90-YY-AY-1 FILE: HEX40L-KC-90-YY-AY-1 SCALE: NONE SHEET: 1 OF 3 CUSTOMER DRAWING REV: DATE: B July 26, 2012 KIT DESCRIPTION ITEM 1 2 3 4 DESCRIPTION BODY ASSEMBLY CLAMPING NUT - PLAIN CONIC RING STAR - PLAIN MATERIAL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL TABLE OF DIMENSIONS Order Number Shell Size ØA Thread Class 6H ØB Max ØC Max D Max E Max 19.0 [0.75”] 22.0 [0.87”] 25.5 [1.00”] 17.5 [0.69”] 21.5 [0.85”] 22.5 [0.89”] 24.4 [1.06] 25.9 [1.02] 27.9 [1.10”] 30.5 [1.20”] 32.0 [1.26”] 34.0 [1.34”] 09 Mil. A Com. 09 M12 x 1 11 B 11 M15 x 1 13 C 13 M18 x 1 Ferrule Quantity Standard 1 2 3 PART NUMBERING 2012 Tyco Electronics Corporation. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS PLAIN CLAMPING NUT Raychem Harnessing 300 Constitution Drive Menlo Park CA, 94025 U.S.A. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: DATE: REVISED PER# IRT May 20, 2008 06090 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision. DOCUMENT NO. HEX40L-KC-90-YY-AY-1 FILE: HEX40L-KC-90-YY-AY-1 SCALE: NONE SHEET: 2 OF 3 CUSTOMER DRAWING REV: DATE: B July 26, 2012 APPLICATION - These adaptors are designed to be mounted on the following connectors: MIL-DTL-38999 Series III and IV - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink moulded parts where strain relief is required – see illustration. - Use in conjunction with ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX Customer Drawing for relevant selection details. INSTALLATION - See Installation Procedure RPIP-696-07 for assembly. - See Installation Procedure RPIP-696-00 for shield termination. PACKAGING - All components are supplied in a plastic bag. NOTES! 1. Item 4 - Star - is not supplied with Hexashield Order Number 09. 2. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX40L-KC-90-13-A3-1) 2012 Tyco Electronics Corporation. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS PLAIN CLAMPING NUT Raychem Harnessing 300 Constitution Drive Menlo Park CA, 94025 U.S.A. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: DATE: REVISED PER# IRT May 20, 2008 06090 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision. DOCUMENT NO. HEX40L-KC-90-YY-AY-1 FILE: HEX40L-KC-90-YY-AY-1 SCALE: NONE SHEET: 3 OF 3