HPP805A031.

HM1500LF Relative Humidity Module SPECIFICATIONS     Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage supply from 4.75Vdc to 5Vdc Patented solid polymer structure   Based on the rugged HS1101LF capacitive humidity sensor, HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s linear voltage output FEATURES   Full interchangeability  Not affected by water immersion  High reliability and long term stability  Very low temperature dependence Suitable for 3 to 10 Vdc supply voltage Humidity Sensor Specific features Instantaneous de-saturation after long periods in saturation phase Fast response time Part could be washed with distilled water (1) Soldering temperature profiles available on request / contact us at humidity.application@te.com APPLICATIONS   SENSOR SOLUTIONS /// HM1500LF HPC062_F Industrial Process control 9/2015 Page 1 HM1500LF Relative Humidity Module PERFORMANCE SPECS MAXIMUM RATINGS Ratings Storage Temperature Storage Humidity Supply Voltage (Peak) Humidity Operating Range Temperature Operating Range Symbol Tstg RHstg Vs RH Ta Value -30 to 70 0 to 100 10 0 to 100 -40 to 60 Unit °C % RH Vdc % RH °C ELECTRICAL CHARACTERISTICS (Ta=23°C, Vs=5Vdc +/-5%, RL>1MΩ unless otherwise stated) Humidity Characteristics Humidity Measuring Range Relative Humidity Accuracy (10 to 95% RH) Supply Voltage (regulated at 5Vdc*) Nominal Output @55%RH (at 5Vdc) Current consumption Temperature Coefficient (10 to 50°C) Average Sensitivity from 33% to 75%RH Sink Current Capability (RL=33kΩ) Humidity Hysteresis Time Constant (at 63% of signal, static) 33% to 75%RH Warm up time (electronic) Humidity resolution Output Impedance Symbol RH RH Vs Vout Ic Tcc ΔVout/ΔRH Is  tw Z Min 0 2.42 Typ +/-3 5 2.48 1.4 - 0.05 +26 Max 100 +/-5 2.54 2 -0.1 150 +/-1 10 150 0.4 70 Unit %RH %RH Vdc V mA %RH/°C mV/%RH µA %RH s ms %RH Ω *Maximum power supply ramp up time to Vcc should be less than 4ms. TYPICAL PERFORMANCE CURVES HUMIDITY SENSOR  Measurement conditions HM1500LF is specified for accurate measurements within 10 to 95% RH. Excursion out of this range (95% RH, including condensation) does not affect the reliability of HM1500LF characteristics. Dedicated HM15XX products are available for extreme RH conditions (as HM1520 for low dewpoints). Consult MEASFRANCE for further information. SENSOR SOLUTIONS /// HM1500LF HPC062_F 9/2015 Page 2 HM1500LF Relative Humidity Module  Modeled Signal Output RH (%) 10 15 20 25 30 35 40 45 50 Vout (mV) 1325 1465 1600 1735 1860 1990 2110 2235 2360 RH (%) 55 60 65 70 75 80 85 90 95 Vout (mV) 2480 2605 2730 2860 2990 3125 3260 3405 3555 LINEAR EQUATIONS:  Vout = 25.68RH + 1079  RH = 0.03892 Vout - 42.017 (With Vout in mV and RH in %) POLYNOMIAL EQUATIONS:  Vout = 9E-4 RH3- 1.3E-1 RH2 + 30.815 RH + 1030  RH = -1,91E-9 Vout 3 + 1,33E-5 Vout 2 + 9,56E-3 Vout - 2,16E+1 (With Vout in mV and RH in %)  Error Budget at 23°C TEMPERATURE COMPENSATION: RH compensaed  RH actualatT  T  23 0.05 (With T: Temperature in °C and RH: Relative Humidity in %) SENSOR SOLUTIONS /// HM1500LF HPC062_F 9/2015 Page 3 HM1500LF Relative Humidity Module QUALIFICATION PROCESS RESISTANCE TO PHYSICAL AND CHEMICAL STRESSES    HM1500LF has passed through qualification processes of MEAS-FRANCE including vibration, shock, storage, high temperature and humidity, ESD. Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO2 (0.5%, H2S (0.5%), 03, NOx, NO, CO, CO2, Softener, Soap, Toluene, acids (H2SO4, HNO3, HCI), HMDS, Insecticide, Cigarette smoke, this is not an exhaustive list. HM1500LF is not light sensitive. SPECIFIC PRECAUTIONS   HM1500LF is protected against reversed polarity. If you wish to use HM1500LF in a chemical atmosphere not listed above, consult us. PACKAGE OUTLINE Dim Min (mm) Max (mm) A 9.75 10.25 B 4.00 4.50 C 53 55 D 10.9 11.4 E* 200 250 * Specific lenght available on request SENSOR SOLUTIONS /// HM1500LF HPC062_F Wire Color Function W1 White Ground W2 Blue Supply Voltage W3 Yellow 9/2015 Humidity Output Voltage Page 4 HM1500LF Relative Humidity Module ORDERING INFORMATION HPP805A031 (MULTIPLE PACKAGE QUANTITY OF 10 PIECES) HM1500LF – HUMIDITY ANALOG VOLTAGE OUTPUT Sample kit of HM1500LF is available through MEASUREMENT SPECIALTIES web site: http://www.meas-spec.com/humidity-sensors.aspx EUROPE Measurement Specialties, Inc - MEAS France Impasse Jeanne Benozzi CS 83 163 31027 Toulouse Cedex 3 FRANCE Tél: +33 (0)5 820 822 02 Fax: +33(0)5 820 821 51 Sales: humidity.sales@meas-spec.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. SENSOR SOLUTIONS /// HM1500LF HPC062_F 9/2015 Page 5