IAC-5E

Solid State Relay Potter & Brumfield IAC Series AC Input Module File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Engineering Data Features Switch Form: 1 Form A (SPST-NO) Duty: Continuous. Operating Temperature: –30°C to +80°C. Storage Temperature: –30°C to 100°C. Potting Compound Flammability: UL94V-0. Approximate Weight: 1.38 oz. (35g). • Industry standard package and pin-out. • Color coded by function. • 4000V rms optical isolation. • High immunity to false operation. • Series compatible. • Compatible with 2IO series mounting boards. Ordering Information Typical Part Number > IAC -5 A 1. Basic Series: IAC = AC input module - yellow case 2. Logic Voltage: 5 = 5VDC 15 = 15VDC 24 = 24VDC 3. Input: Blank = 120VAC input (90-140VAC) * * A = 240VAC input (180-280VAC) * * E = 18-36VAC input * * * * Is not polarity sensitive. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. IAC-5 IAC-5A IAC-5E IAC-15 IAC-24 Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Max. Input Current Input Resistance 1 02-2019, Rev. 0219 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Conditions @VIN=Max. IAC-5 IAC-15 IAC-24 Units VAC VAC VAC mA Ohms Min. 90 Typ. 120 60 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Max. 140 90 IAC-5A IAC-15A IAC-24A Min. 180 Typ. 240 Max. 280 180 60 1-5 IAC-5E IAC-15E IAC-24E Min. 18 Typ. 24 Max. 36 18 10 1-8 Current Regulator Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 0.2 - 2.0 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. Solid State Relay Potter & Brumfield IAC Series(Continued) AC Input Module Output Specifications (@ +25˚C unless otherwise specified) Parameter Maximum Output Voltage Maximum Output Current Maximum Output Leakage Current Maximum Output Voltage Drop Logic Supply Voltage VCC Logic Supply Current Turn-On Time (Nominal) Turn-Off Time (Nominal) Output Type (Open Collector) Conditions VOUT=Max. ISINK=50mA VCC=Max. ISINK=25mA ISINK=25mA Units VDC mADC mA VDC VDC mADC ms ms IAC Operating Diagram IAC-5 IAC-5A IAC-5E Min. Typ. Max. 30 50 10 0.2 3 5 6 15 20 30 Normally Open(SINKING) IAC-15 IAC-15A IAC-15E Min. Typ. Max. 30 50 10 0.2 12 15 18 15 20 30 Normally Open(SINKING) IAC-24 IAC-24A IAC-24E Min. Typ. Max. 30 50 10 0.2 20 24 30 15 20 30 Normally Open(SINKING) PCB Layout Outline Dimensions Note : Extra nut and washer will be provided on the screw, which will goes under PCB to fix the relay. Hex Nut S= 6.35 (width across flats), Thickness = 2.40 Washer = OD : 4.85±0.25, ID: 2.75±0.15, Thickness = 0.55 02-2019, Rev. 0219 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 2