JJEV0UG380NONMQTR

JJE SERIES – DETECTOR SWITCHES Applications JJ Series – Detector Switches • Automotive • Instrumentation • White goods • Telecommunications Benefits • RoHS Compliant • Halogen and Lead Free • Sharp detection feeling • Compact Size TE Connectivity is pleased to introduce its JJ Series of Detector Switches, suitable for a wide variety of applications given their several presentations ranging from horizontal or vertical actuated options as well as Gull-winged, J-leaded and Through-Hole mounting possibilities. The Detector Switches will be offered in a wide range of sizes giving the possibility for countless applications going from automotive to telecommunications. JJ Series – Family Classification 2331394-1 Rev A 06/2018 Series Body Size JJA JJB JJC JJD JJE JJF JJG JJH JJI JJJ JJK JJL JJM JJN JJO JJP 3.5x2.8 mm 3.5x2.98 mm 3.5x3.3 mm 4.2x3.6 mm 4.7x3.5 mm 4.7x3.8 mm 5.7x4.0 mm (High-Rating) 5.7x4.0 mm (Standard-Rating) 5.0x4.4 mm 6.0x4.85 mm / 5.5x4.7 mm 6.3x3.0 mm 6.5x3.9 mm 5.7x4.0 mm 5.7x4.0 mm (Wedge) 10.0x3.8 mm 10.6x10.0 mm Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES JJE Family – 4.7x3.5 mm JJE --- NOH Contact Rating Contact Resistance Insulation Resistance Dielectric Strength Operating Force Travel Operating Life Operating Temperature Storage Temperature Features Applications • • • • Guiding post for easy orientation Long travel type 10mA, 5VDC Max. 1Ω Max. 100MΩ Min. 100VAC/1 minute 36gF Max. 2.5mm 100,000 cycles -40˚C to 85˚C -40˚C to 85˚C Consumer electronics Medical devices Circuit Diagram 2331394-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES 1. Style “Detector Switches” are mainly used as signal switches of electric devices, with the general requirements of mechanical and electrical characteristic. 1.1 Operating Temperature Range: -40℃ to 85℃ 1.2 Storage Temperature Range: -40℃ to 85℃ 1.3 The shelf life of product is within 6 months. 2. Current Range: 10mA, 5VDC Max. 3. Type of Actuation: Momentary 4. Test Sequence: Item Description 1 Visual Examination 2 Contact Resistance Actuate the switch (2.80) and measure contact resistance using a micro-Ohmmeter. 3 Insulation Resistance Measurements shall be made at 100 VDC potential between terminals and cover. 4 Dielectric Withstanding Voltage Appearance Electric Performance 5 2331394-1 Rev A 06/2018 Test Conditions Physical inspection without applying any external forces. Requirements There shall be no defects that affect the serviceability of the product. 1Ω Max. 100MΩ Min 100 VAC (50Hz or 60Hz) shall be applied across terminals and cover for 1 minute There shall be no breakdown or flashover 3 to 4 operations at a rate of 1 cycles per second Bounce 10 m seconds Max. Bounce Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES As the specification shows operating force is measured Mechanical Performance 6 Operating Force 36gf (0.35N) Max. 7 Contact (On) point 3.5±0.20mm 8 Stroke 1.30mm 9 Stop Strength 10 11 Durability Environmental Endurance 2331394-1 Rev A 06/2018 12 13 Operation direction: 1kg (9.8N) static operation force applies on the center of the actuator for 15 seconds. Solder Heat Resistance Solderability Operating Life Vibration (See chart below) 1) Soldering Temperature：245±3℃ Lead-Free solder：M705E JIS Z 3282 A (Tin 96.5%，Silver 3%，Copper 0.5%) 2) Flux: 5-10 sec. 3) Duration of solder mmersion:5±1sec Tested as follows: 1) 1mA,5 VDC resistive load 2) Applying a static load the operating force to the center of the stem in the direction of operation Static Load = OF Max. 3) Rate of Operation:15~20 operation per minute. 4) Cycle of Operation: 100,000 cycles Min. Test per Method IEC 60068-2-6: 1) Swing distance=1.5mm) 2) Frequency: 10-55Hz in 9.81minute/10cycle. 3) Direction: 3 vertical directions including the directions of operation 4) Test time: 98.1 minute each direction Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change As shown in items 2 through 7. Shall be free from pronounced backlash and falling-off or breakage terminals (As shown in item 2 to7) No anti-soldering and the coverage of dipping into solder must more than 90% was requested 1) As shown in item 4 to 5 2) Operating force: ±50% of initial force. 3) Contact Resistance: 10Ω Max 4) Insulation Resistance: 10MΩ Min 1) As shown in item 4 to 7 2)Contact Resistance: 10Ω Max 3)Insulation Resistance: 10MΩ Min For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES 14 15 Shock Cold Resistance Environmental Endurance 16 17 Heat Resistance Humidity Resistance Test per Method IEC60068-2-27 1) Acceleration; 50G 2) Action time:11±1m seconds 3) Testing Direction: 6 sides 4) Test Cycle: 3 times in each direction 1) As shown in item 4 to 7 2) Contact Resistance: 10Ω Max 3) Insulation Resistance: 10MΩ Min Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature: -40±2℃ 2) Time: 96hours 1) As shown in item 4 to 7 2) Contact Resistance: 10Ω Max 3) Insulation Resistance: 10MΩ Min Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature:85±2℃ 2) Time: 96 hours Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature: 40±2℃ 2) Relative Humidity: 90 to 95% 3) Time: 96 hours 1) As shown in item 4 to 7 2) Contact Resistance: 10Ω Max 3) Insulation Resistance: 10MΩ Min 1) As shown in item 4 to 7 2) Contact Resistance: 10Ω Max 3) Insulation Resistance: 10MΩ Min 5. Soldering Conditions: ■ Recommended Soldering Profile for the JJE Series ■ The condition mentioned above is the temperature on the Cu foil of the PCB surface. There are cases where board's temperature greatly differs from switch's surface be used not to allow switch's surface temperature to exceed 260℃. ■ Manual Soldering Soldering Temperature: 350℃ Max. Continuous Soldering Time: 5 second Max. 2331394-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES ■ Precautions in Handling 1. Care must be taken to ensure excess flux on the top surface of the printed circuit board does not adhere to the switch. 2. Do not wash the switch. ■ Recommended storage conditions: Store the products in the original packaging material. After opening the package, the remaining products must be stored in the appropriate moisture-proof & airtight environment. Do not store the switch in the following environment or it may affect performance and solderability: 1. temperatures below -10° C to 40°C & humidity at 85% (min) 2. environment with corrosive gas 3. storage over 6 months 4. place in direct sunlight 2331394-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES JJE --- NO Contact Rating Contact Resistance Insulation Resistance Dielectric Strength Operating Force Travel Operating Life Operating Temperature Storage Temperature 1mA, 5VDC Max. 1Ω Max. 50MΩ Min. 250VAC/1 minute 60gF Max. 2.5mm 100,000 cycles -40℃ to 85℃ -40℃ to 85℃ Circuit Diagrams 2331394-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES 1. Style “Detector Switches” are mainly used as signal switches of electric devices, with the general requirements of mechanical and electrical characteristic. 1.1 Operating Temperature Range: -40℃ to 85℃ 1.2 Storage Temperature Range: -40℃ to 85℃ 1.3 The shelf life of product is within 6 months. 2. Current Range: 1mA, 5VDC Max. 3. Type of Actuation: Momentary 4. Test Sequence: Item Description 1 Visual Examination Appearance Electric Performance 2331394-1 Rev A 06/2018 Test Conditions Physical inspection without applying any external forces. 2 Contact Resistance Applying a static load twice the operating force to the measure position of the slider. Shall be measured at 1KHz ± 200Hz (Max. 20mV, Max. 50mA.) or 1A, 5VDC. By voltage drop method. 3 Insulation Resistance Measurements shall be made at 250 VDC potential between terminals and cover. 4 Dielectric Withstanding Voltage Apply 250 VAC (50Hz or 60Hz) between terminals and cover for 1 minute. Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change Requirements There shall be no defects that affect the serviceability of the product. 1Ω Max. 50MΩ Min. There shall be no breakdown or flashover For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES 5 Operating Force Applying force to the center of the stem for 1.60±0.2mm (0.063±.008in.) 50gF Max. (0.49N Max.) 6 Terminal Strength A static load of 300gf shall be applied to the tip of terminal in the desired direction for 1 minute. The number of tests shall be once per terminal. Shall be free from terminal looseness and damage and breakage of terminal Holding portion. Control Strength 1) A static load of 500gf shall be applied in the operating direction of the slider for 1 minute. 2) A static load of 150gf shall be applied to the slider in the vertical direction of operation for 1 minute. 1) Contact resistance: 10Ω Max. 2) Insulation resistance: 10MΩ Min. 3) Withstand voltage: 250VAC for 1 minute 4) Operating force: within ±30% of initial Value. 5) Appearance: every part should not defect in appearance Solderability Switch shall be checked after following test: 1) Soldering temperature: 260±5℃ 2) Dipping time: 3±0.5 sec. More than 90% of Immersed part shall be covered with Solder. Excluding the cutting surface. 7 Mechanical Performance 8 Switch shall be measured after following test. 1) Hand soldering temperature: 350℃ Max. Time: 3 seconds Max. 2) Reflow soldering: 2 times or less 9 Soldering Heat Resistance 1) Contact resistance: 10Ω Max. 2) Insulation resistance: 10MΩ Min. 3) Withstand voltage: 250VAC for 1 minute 4) Operating force: within ±30% of initial Value. 5) Appearance: every part should not defect in appearance Above mentions time-temperature Chart is based on the temperature on The parts-mounting surface of PCB. Durability 2331394-1 Rev A 06/2018 10 Operating Life Tested as follows: 1) Rate of operation: 15 to 20 operations per minute. 2) Cycle of operation: 100,000 cycles Min. Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change 1) Contact resistance: 10Ω Max. 2) Insulation resistance: 10MΩ Min. 3) Withstand voltage: 250VAC for 1 minute 4) Operating force: within ±30% of initial Value. 5) Appearance: every part should not defect in appearance For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES 11 12 Weather Performance Humidity Resistance Testing switch being kept in the conditions at 65±2℃ and 90 to 95% RH for 96 hours, then in a normal ambient condition for 1 hour, then to be measured within 1 hour. Heat Resistance Testing switch being kept in the Conditions at 80±2℃ in temperature for 96 hours, then in a normal ambient condition for 1 hour, then to be measured within 1 hour. Cold Resistance 13 Testing switch being kept in the conditions at -40±2℃ in temperature for 96 hours, then in a normal ambient condition for 1 hour, then to be measured within 1 hour. Water drops shall be removed. After 5 cycles of following conditions, the Switch shall be allowed to stand under Normal temperature and humidity conditions for 1 hour, and water drops Shall be removed. 14 1) Contact resistance: 10Ω Max. 2) Insulation resistance: 10MΩ Min. 3) Withstand voltage: 250VAC for 1 minute 4) Operating force: within ±30% of initial Value. 5) Appearance: every part should not defect in appearance Temperature Cycle Test ■ Precautions in Handling 1. Care must be taken to ensure excess flux on the top surface of the printed circuit board does not adhere to the switch. 2. Do not wash the switch. ■ Recommended storage conditions: Store the products in the original packaging material. After opening the package, the remaining products must be stored in the appropriate moisture-proof & airtight environment. Do not store the switch in the following environment or it may affect performance and solderability: 1. temperatures below -10° C to 40°C & humidity at 85% (min) 2. environment with corrosive gas 3. storage over 6 months 4. place in direct sunlight 2331394-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel JJE SERIES – DETECTOR SWITCHES How to order PN List Smart PN Orientation Grounding Mounting Height Circuit Guiding Post Cover Plating Packaging MOQ TE PN JJEV0UG380NOHPMRTR Vertical Push Ungrounded Gullwinged 3.80mm NOH Post Metal Silver Tape and Reel 1,800 2331394-1 JJEV0UG380NOHNMRTR Vertical Push Ungrounded Gullwinged 3.80mm NOH No Post Metal Silver Tape and Reel 1,800 2331395-1 JJEV0UG380NONMRTR Vertical Push Ungrounded Gullwinged 3.80mm NO No Post Metal Silver Tape and Reel 3,000 2331417-1 2331394-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel