JJHH0UG375NCPPQTR

JJH SERIES – DETECTOR SWITCHES Applications JJ Series – Detector Switches • Automotive • Instrumentation • White goods • Telecommunications Benefits • RoHS Compliant • Halogen and Lead Free • Sharp detection feeling • Compact Size TE Connectivity is pleased to introduce its JJ Series of Detector Switches, suitable for a wide variety of applications given their several presentations ranging from horizontal or vertical actuated options as well as Gull-winged, J-leaded and Through-Hole mounting possibilities. The Detector Switches will be offered in a wide range of sizes giving the possibility for countless applications going from automotive to telecommunications. JJ Series – Family Classification 2331390-1 Rev A 06/2018 Series Body Size JJA JJB JJC JJD JJE JJF JJG JJH JJI JJJ JJK JJL JJM JJN JJO JJP 3.5x2.8 mm 3.5x2.98 mm 3.5x3.3 mm 4.2x3.6 mm 4.7x3.5 mm 4.7x3.8 mm 5.7x4.0 mm (High-Rating) 5.7x4.0 mm (Standard-Rating) 5.0x4.4 mm 6.0x4.85 mm / 5.5x4.7 mm 6.3x3.0 mm 6.5x3.9 mm 5.7x4.0 mm 5.7x4.0 mm (Wedge) 10.0x3.8 mm 10.6x10.0 mm Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help JJH SERIES – DETECTOR SWITCHES JJH Family – 5.7x4.0 mm (Standard-Rating) Contact Rating Contact Resistance Insulation Resistance Dielectric Strength Operating Force Travel Operating Life Operating Temperature Storage Temperature Features Applications • • • • • • • Easy orientation offered by guiding post. Ultra-low profile with 2.0mm. NO and NC circuit availability. 10mA, 5VDC 1Ω Max. 100MΩ Min. 100VDC 100VAC/1 minute 150gF Max. 2.0mm 100,000 cycles -40˚C to 85˚C -40˚C to 85˚C Notebooks. Detection of car audio mechanisms. Smoke detectors. Industrial application. Circuit How To Order 2331390-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help JJH SERIES – DETECTOR SWITCHES Diagrams PN List Smart PN Orientation Grounding Mounting Height Circuit Guiding Post Cover Plating Packaging MOQ JJHH0UG200NCPMRTR Horizontal (Push) Ungrounded Gullwinged 2.00mm NC Post Metal Silver Tape and Reel 3,000 JJHH0UG200NCNMRTR Horizontal (Push) Ungrounded Gullwinged 2.00mm NC No Post Metal Silver Tape and Reel 3,000 JJHH0UG200NOPMRTR Horizontal (Push) Ungrounded Gullwinged 2.00mm NO Post Metal Silver Tape and Reel 3,000 JJHH0UG200NONMRTR Horizontal (Push) Ungrounded Gullwinged 2.00mm NO No Post Metal Silver Tape and Reel 3,000 2331390-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change TE PN 2331390-1 2331391-1 2331392-1 2331393-1 For Email, phone or live chat, go to: www.te.com/help JJH SERIES – DETECTOR SWITCHES 1. Style “Detector Switches” are mainly used as signal switches of electric devices, with the general requirements of mechanical and electrical characteristic. 1.1 Operating Temperature Range: -40℃ to 85℃ 1.2 Storage Temperature Range: -40℃ to 85℃ 1.3 The shelf life of product is within 6 months. 2. Current Range: 10mA, 5 VDC 3. Type of Actuation: Momentary 4. Test Sequence: Item Description 1 Visual Examination 2 Contact Resistance Actuate the switch and measure contact resistance using a micro-Ohmmeter. 1Ω Max. 3 Insulation Resistance Measurements shall be made at 100 VDC potential between terminals and cover. 100MΩ Min. 4 Dielectric Withstanding Voltage 100 VAC (50Hz or 60Hz) shall be applied across terminals and cover for 1 minute Appearance Electric Performance 2331390-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Test Conditions Physical inspection without applying any external forces. Dimensions Shown for reference purposes only. Specifications subject to change Requirements There shall be no defects that affect the serviceability of the product. There shall be no breakdown or flashover For Email, phone or live chat, go to: www.te.com/help JJH SERIES – DETECTOR SWITCHES 5 Operating Force 6 Contact (On) point 7 8 Stop Strength 10 11 2331390-1 Rev A 06/2018 -------------------------- 1) Operation direction: 0.5KgF static operation force applies on the center of the actuator for 15 seconds. 2) Non-operation direction: 0.1KgF static operation force applies on any direction for 15 seconds. Solder Heat Resistance (See chart below) Vibration Test per Method 201A of MIL-STD-202F 1) Swing distance=1.5mm 2) Frequency: 10-55-10Hz in 1min/cycle. 3) Direction: 3 vertical directions including the directions of operation 4) Test time: 2 hours each direction Mechanical Performance 9 As the specification shows operating force is measured Shock Operating Life Dimensions in millimetres unless otherwise specified Test per Method 213B condition A of MIL-STD-202F 1) Acceleration; 50G 2) Action time:11±1m seconds 3) Testing Direction: 6 sides 4) Test Cycle: 3 times in each direction Tested as follows: 1) 1mA,5 VDC resistive load 2) Apply a static load in the direction of operation equal to the operating force to the center of the stem. 3) Rate of Operation: 15 operations per minute. 4) Cycle of Operation: 100,000 cycles Min. Dimensions Shown for reference purposes only. Specifications subject to change 150gF Max. (1.5N Max.) As the specification shows ON start position 1) As shown in item 2 to 7. 1) Shall be free from pronounced backlash and falling-off or breakage terminals 2) As shown in item 2 to 7 1) As shown in item 2 to 7. 1) As shown in item 2 to 8. 1) As shown in item 4 to 5 2) Insulation Resistance: 100MΩ Min. 3) Contact Resistance: 10Ω Max. For Email, phone or live chat, go to: www.te.com/help JJH SERIES – DETECTOR SWITCHES 12 WeatherProof 13 14 Resistance Low Temperature Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature: -40±2℃ 2) Time: 96 hours Heat Resistance Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature:85±2℃ 2) Time: 96 hours Humidity Resistance Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature:40±2℃ 2) Relative Humidity: 90~95% 3) Time: 96 hours 1) As shown in item 2 to 7. 1) As shown in item 4~7 2) Insulation resistance: 2) Insulation Resistance: 10MΩ Min. 5. Soldering Conditions: ■ Recommended Soldering Profile for the JJH Series ■ The temperatures defined above are the temperatures measured on the surface of the Printed Circuit Board. There are cases where the printed circuit board's temperature differs greatly from the temperature of the switch. Critical note: the switch's surface temperature must not exceed 260℃. ■ Manual Soldering Soldering Temperature: 350℃ Max. Continuous Soldering Time: 5 second Max. ■ Precautions in Handling 1. Care must be taken to ensure excess flux on the top surface of the printed circuit board does not adhere to the switch. 2. Do not wash the switch. 2331390-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help JJH SERIES – DETECTOR SWITCHES ■ Recommended storage conditions: Store the products in the original packaging material. After opening the package, the remaining products must be stored in the appropriate moisture-proof & airtight environment. Do not store the switch in the following environment or it may affect performance and solderability: 1. temperatures below -10° C to 40°C & humidity at 85% (min) 2. environment with corrosive gas 3. storage over 6 months 4. place in direct sunlight 2331390-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help