JJMH0UG200NONMRTR

JJM SERIES – DETECTOR SWITCHES Applications JJ Series – Detector Switches • Automotive • Instrumentation • White goods • Telecommunications Benefits • RoHS Compliant • Halogen and Lead Free • Sharp detection feeling • Compact Size TE Connectivity is pleased to introduce its JJ Series of Detector Switches, suitable for a wide variety of applications given their several presentations ranging from horizontal or vertical actuated options as well as Gull-winged, J-leaded and Through-Hole mounting possibilities. The Detector Switches will be offered in a wide range of sizes giving the possibility for countless applications going from automotive to telecommunications. JJ Series – Family Classification 2331293-1 Rev A 06/2018 Series Body Size JJA JJB JJC JJD JJE JJF JJG JJH JJI JJJ JJK JJL JJM JJN JJO JJP 3.5x2.8 mm 3.5x2.98 mm 3.5x3.3 mm 4.2x3.6 mm 4.7x3.5 mm 4.7x3.8 mm 5.7x4.0 mm (High-Rating) 5.7x4.0 mm (Standard-Rating) 5.0x4.4 mm 6.0x4.85 mm / 5.5x4.7 mm 6.3x3.0 mm 6.5x3.9 mm 5.7x4.0 mm 5.7x4.0 mm (Wedge) 10.0x3.8 mm 10.6x10.0 mm Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel p JJM SERIES – DETECTOR SWITCHES JJM Family – 5.7x4.0 mm Contact Rating Contact Resistance Insulation Resistance Dielectric Strength Operating Force Travel Operating Life Operating Temperature Storage Temperature Features Applications • • • • • Post and No-Post options available. NO and NC circuit options available. 100mA, 12VDC 80mΩ Max. 100MΩ Min. 100VDC 100VAC/1 minute 70gF Max. 2.00mm 50,000 cycles -10˚C to 60˚C -30˚C to 80˚C Automotive. Telecommunications. Measurement instrumentations. Circuit How To Order 2331293-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel p JJM SERIES – DETECTOR SWITCHES Diagrams -Post -No Post PN List Smart PN Orientation Grounding Mounting Height Circuit Guiding Post Cover Plating Packaging MOQ TE PN JJMH0UG200NOPMRTR Horizontal (Push) Ungrounded GullWinged 2.00mm NO Post Metal Silver Tape and Reel 1,900 2331293-1 JJMH0UG200NCNMRTR Horizontal (Push) Ungrounded GullWinged 2.00mm NC No-Post Metal Silver Tape and Reel 1,900 2331327-1 2331293-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel p JJM SERIES – DETECTOR SWITCHES 1. Style “Detector Switches” are mainly used as signal switches of electric devices, with the general requirements of mechanical and electrical characteristic. 1.1 Operating Temperature Range: -10℃ to 60℃ 1.2 Storage Temperature Range: -30℃ to 80℃ 1.3 The shelf life of product is within 6 months. 2. Current Range: 100mA, 12VDC 3. Type of Actuation: Auto Return 4. Test Sequence: Item Description 1 Visual Examination 2 Contact Resistance Shall be measured at 1KHz ± 200Hz (20mV Max, 50mA Max) or 1A 5VDC by voltage drop method. 80mΩ Max. 3 Insulation Resistance Measurements shall be made at 100 VDC potential between terminals and cover. 100MΩ Min. 4 Dielectric Withstanding Voltage Appearance Electric Performance 2331293-1 Rev A 06/2018 Test Conditions Physical inspection without applying any external forces. Apply 100 VAC (50Hz or 60Hz) between terminals and cover for 1 minute. Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change Requirements There shall be no defects that affect the serviceability of the product. There shall be no breakdown or flashover For Email, phone or live chat, go to: www.te.com/hel p JJM SERIES – DETECTOR SWITCHES 5 6 Operating Force Durability Weather-proof 2331293-1 Rev A 06/2018 8 9 70gF Max. (.69N Max.) Terminal Strength Fixing the switch then apply with a static load of 0.3KgF to the tip of the terminal in a desired direction for 1 minute Shall be free from any terminal damage and looseness and breakage of terminal holding position. Terminal may be bent after test, electrical performance requirement specified in item 4 shall be satisfied. Control Strength 1) A static load of 1KgF shall be applied in the operating direction of actuator for 15 seconds. 2) A static load of 0.3KgF shall be applied in the pulling direction of actuator for 15 seconds. (For construction with lock, the test shall be conducted at the condition of lock released) 3) A static load of 0.7KgF shall be applied to the vertical direction of operation at the tip of actuator for 15 seconds. Shall be free from mechanical and electrical abnormalities. 50,000 cycles operations at a rate of 15 to 20 cycles/min. without load. (When pushing the actuator at right angle) 1) Contact resistance: 150mΩ Min. 2) Insulation resistance: 10MΩ Min. 3) Voltage proof: Applying 100V AC for 1 minute, no dielectric breakdown shall occur. 4) Operating force: Within 30% of specified value. 5) No abnormalities shall be recognised in appearance construction. Mechanical Performance 7 Applying force to the center of the stem for 2.00mm Operating Life Temperature cycling After 5 cycles of following conditions, the switch shall be allowed to stand under normal temperature and humidity condition for 1 hour and then measurement shall be made within 1 hour after that. Water drops shall be removed. Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change 1) Contact resistance: 150mΩ Min. 2) Insulation resistance: 10MΩ Min. 3) Voltage proof: Applying 100V AC for 1 minute, no dielectric breakdown shall occur. 4) Operating force: Within 30% of specified value. 5) No abnormalities shall be recognised in appearance construction. For Email, phone or live chat, go to: www.te.com/hel p JJM SERIES – DETECTOR SWITCHES 10 Resistance Low Temperature 11 Heat Resistance 12 Humidity Resistance 13 Salt mist Weatherproof Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature: -30±2℃ 2) Time: 96 hours Water drops shall be removed. Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature:85±2℃ 2) Time: 96 hours Water drops shall be removed. Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature:60±2℃ 2) Relative Humidity: 90 to 95% 3) Time: 96 hours Water drops shall be removed. Switch shall be checked after the following test: 1) Temperature: 35±2℃ 2) Salt saturation: 5±1%(Solids by weight) 3) Duration: 24±1 hours After the test, salt deposit shall be removed in running water. 1) Contact resistance: 150mΩ Min. 2) Insulation resistance: 10MΩ Min. 3) Voltage proof: Applying 100V AC for 1 minute, no dielectric breakdown shall occur. 4) Operating force: Within 30% of specified value. 5) No abnormalities shall be recognised in appearance construction. No remarkable corrosion shall be recognised in metal part. 5. Soldering Conditions: ■ Recommended Soldering Profile for the JJM Series ■ The temperatures defined above are the temperatures measured on the surface of the Printed Circuit Board. There are cases where the printed circuit board's temperature differs greatly from the temperature of the switch. Critical note: the switch's surface temperature must not exceed 260℃. ■ Manual Soldering Preheat: 150℃ to 200℃, 120±20 (sec) Soldering area temperature: 217℃, 90 to 120 (sec) 2331293-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel p JJM SERIES – DETECTOR SWITCHES ■ Precautions in Handling 1. Care must be taken to ensure excess flux on the top surface of the printed circuit board does not adhere to the switch. 2. Do not wash the switch. ■ Recommended storage conditions: Store the products in the original packaging material. After opening the package, the remaining products must be stored in the appropriate moisture-proof & airtight environment. Do not store the switch in the following environment or it may affect performance and solderability: 1. temperatures below -10°C to 40°C & humidity at 85% (min) 2. environment with corrosive gas 3. storage over 6 months 4. place in direct sunlight 2331293-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/hel p