JJPV0US830NOPPRLO

JJP SERIES – DETECTOR SWITCHES Applications JJ Series – Detector Switches • Automotive • Instrumentation • White goods • Telecommunications Benefits • RoHS Compliant • Halogen and Lead Free • Sharp detection feeling • Compact Size TE Connectivity is pleased to introduce its JJ Series of Detector Switches, suitable for a wide variety of applications given their several presentations ranging from horizontal or vertical actuated options as well as Gull-winged, J-leaded and Through-Hole mounting possibilities. The Detector Switches will be offered in a wide range of sizes giving the possibility for countless applications going from automotive to telecommunications. JJ Series – Family Classification 2331331-1 Rev A 06/2018 Series Body Size JJA JJB JJC JJD JJE JJF JJG JJH JJI JJJ JJK JJL JJM JJN JJO JJP 3.5x2.8 mm 3.5x2.98 mm 3.5x3.3 mm 4.2x3.6 mm 4.7x3.5 mm 4.7x3.8 mm 5.7x4.0 mm (High-Rating) 5.7x4.0 mm (Standard-Rating) 5.0x4.4 mm 6.0x4.85 mm / 5.5x4.7 mm 6.3x3.0 mm 6.5x3.9 mm 5.7x4.0 mm 5.7x4.0 mm (Wedge) 10.0x3.8 mm 10.6x10.0 mm Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help JJP SERIES – DETECTOR SWITCHES JJP Family – 10.6x10.0 mm Contact Rating Contact Resistance Insulation Resistance Dielectric Strength Operating Force Travel Operating Life Operating Temperature Storage Temperature Features Applications • Easy orientation provided by guiding posts • Snap-in mounting • • • 100mA, 5VDC 500mΩ Max. 100MΩ Min. 100VDC 100VAC/1 minute 50gF Max. 1.8±0.15mm 50,000 cycles -10˚C to 60˚C -30˚C to 80˚C Automotive. Telecommunications. Measurement instrumentations. Circuit How To Order 2331331-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help JJP SERIES – DETECTOR SWITCHES Diagrams PN List Smart PN Orientation Grounding Mounting Height Circuit Guiding Post Cover Plating Packaging MOQ TE PN JJPH0US830NOPPRLO Horizontal (Push) Ungrounded Snap-In 8.30mm NO Post Plastic Silver Tray 1,600 2331331-1 2331331-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help JJP SERIES – DETECTOR SWITCHES 1. Style “Detector Switches” are mainly used as signal switches of electric devices, with the general requirements of mechanical and electrical characteristic. 1.1 Operating Temperature Range: -10℃ to 60℃ 1.2 Storage Temperature Range: -30℃ to 80℃ 1.3 The shelf life of product is within 6 months. 2. Current Range: 100mA, 5VDC 3. Type of Actuation: Auto Return 4. Test Sequence: Item Description 1 Visual Examination 2 Appearance Electric Performance 2331331-1 Rev A 06/2018 Test Conditions Requirements Physical inspection without applying any external forces. There shall be no defects that affect the serviceability of the product. Contact Resistance Actuate the switch (6.8mm) and measure contact resistance using a microOhmmeter. 1) Initial: 500mΩ Max. 2) After each test: 1Ω Max. 3 Insulation Resistance Measurements shall be made at 500 VDC potential between terminals and cover. 1) Initial: 100MΩ Max. 2) After moisture resistance test: 1MΩ Min. 4 Dielectric Withstanding Voltage Apply 300 VAC (50Hz or 60Hz) between terminals and cover for 1 minute. There shall be no breakdown or flashover Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help JJP SERIES – DETECTOR SWITCHES 5 6 7 Operating Force Terminal Strength Control Strength Mechanical Performance Applying force to the center of the stem for 6.8mm A static load of 4.9N (500gF) shall be applied to the tip of terminal in the desired direction for 15 sec. 1) Shall be free from terminal looseness and damage terminal may be bent. 2) Electrical characteristics of Items 2 to 4 shall be satisfied. 1) A static load of 9.8N (1KgF) shall be applied in the operating direction of the control unit for 15 seconds. 1) Shall be free from mechanical and electrical abnormalities. 2) A static load of 2.94N (0.3KgF) shall be applied in the vertical direction of operation for 15 seconds. 2) Electrical characteristics of Items 2 to 4 shall be satisfied. Test each sample switch under the following conditions: 8 Solderability 50gF Max. (0.49N Max.) 1) Solder bath temperature 230±5℃ *90% or more of immersion area shall be covered with new solder. 2) Dipping time 3±0.5 sec 9 Vibration 1) Vibration frequency range: 10 to 50Hz 2) Total amplitude: 1.5mm 3) Sweep ratio: 1min This motion shall be applied for a period of 2 hours in each of 3 mutually perpendicular axes. Durability Weather-proof 2331331-1 Rev A 06/2018 10 11 Operating Life Temperature cycling Dimensions in millimetres unless otherwise specified Tested as follows: 1) Without load: 100,000 cycles operations at a rate of 31.5mm/sec (15 cycles per minute) for Max. stroke without load. 2) With load: 100,000 cycles operations at a rate of 15 to 20 cycles per minute for max stroke with load of rated voltage and current (5VDC 1mA). 1) Electrical characteristics: As shown on item 2 to 4 2) Mechanical characteristics: As shown on item 5 to 7 The switch shall be subjected to 10 successive changes of temperature cycles. Then leave the switch at normal temperature and humidity for 2 hours after which measurement shall be made within 1 hour. 1) -30±3℃ for 30 min. 2) Normal temperature 10 to 15 Min. 3) 70±2℃ for 30 min. 4) Normal temperature 10 to 15 min. Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help JJP SERIES – DETECTOR SWITCHES 12 13 Resistance Low Temperature Heat Resistance Weatherproof 14 15 16 Humidity Resistance Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature: -30±3℃ 2) Time: 168 hours Water drops shall be removed. Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature:85±2℃ 2) Time: 168 hours Water drops shall be removed. Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature:60±2℃ 2) Relative Humidity: 90 to 95% 3) Time: 168 hours Water drops shall be removed. Salt mist Switch shall be checked after the following test: 1) Temperature: 35±2℃ 2) Salt saturation: 5±1%(Solids by weight) 3) Duration: 22 hours 4) After the test, salt deposit shall be removed in running water not warmer than 37.8℃ 5) The testing repeat is 3 cycles. Resistance to Soldering Heat Test each sample switch under the following conditions. 1) Reflow soldering: -The switch shall be stored at a temperature of 150±2℃ for 3 min and stored at a temperature of 230±2℃ for 1 min. -The switch is maintained at ordinally temperature and measurement shall be made. 1) Manual soldering: -Bit temperature 350 ℃ -Application time 3sec Max. 1) Electrical characteristics: As shown on item 2 to 4 2) Mechanical characteristics: As shown on item 5 to 7 No remarkable corrosion shall be recognised in metal part. 1) Electrical characteristics: As shown on item 2 to 4 2) Mechanical characteristics: As shown on item 5 to 7 Mechanical Performance 17 Chattering t1 and t3 shall be less then 8msec. Bouncing t2 shall be less than 8msec. Chattering (Bounce) Several times of operation to the total travel position shall be performed at a speed of 10mm/sec Chattering (Bouncing) shall be applied to the voltage change time more than 1V. 2331331-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change In the case of two or more bounces, the total time of bounces shall be less then 8msec. For Email, phone or live chat, go to: www.te.com/help JJP SERIES – DETECTOR SWITCHES 5. Soldering Conditions: ■ Recommended Soldering Profile for the JJP Series ■ ■ The temperatures defined above are the temperatures measured on the surface of the Printed Circuit Board. There are cases where the printed circuit board's temperature differs greatly from the temperature of the switch. Critical note: the switch's surface temperature must not exceed 260℃. ■ Auto Soldering Preheat: 150℃ to 175℃, 40 to 80 (sec) Soldering area temperature: 260℃, 1 to 4 (sec), 2 times Max. ■ Precautions in Handling 1. Care must be taken to ensure excess flux on the top surface of the printed circuit board does not adhere to the switch. 2. Do not wash the switch. ■ Recommended storage conditions: Store the products in the original packaging material. After opening the package, the remaining products must be stored in the appropriate moisture-proof & airtight environment. Do not store the switch in the following environment or it may affect performance and solderability: 1. temperatures below -10° C to 40°C & humidity at 85% (min) 2. environment with corrosive gas 3. storage over 6 months 4. place in direct sunlight 2331331-1 Rev A 06/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help