LEB-1040P-9

TECHNICAL DATASHEET Doc. No: TTDS 186 Rev1 Tyco Electronics LEB-…P-9 LEB self-adhesive laser printer labels. Label material Polyester film, matt white Adhesive Permanent pressure sensitive acrylic Liner Double sided poly coated white Thickness: Label 0.05 mm ±10% Liner 0.12 mm ±10% Peel Adhesion Stainless steel ASTM D3652 620 N/m FTM 1 (72 hour dwell) Average values Service Temperature -30ºC to +120 ºC Minimum application temperature 10 ºC Print permanence Dry rub Laser jet - 6 sheets/min Storage stability 2 years at 21°C and 50% RH Printability Laserprinter Tyco Electronics idento GmbH Paul-Ehrlich-Straße 23 D-63322 Rödermark Tel.: 06074/8908-0 SAE-AS-81531 Print legible after 500+ rubs Tyco Electronics Idento ZI de Comboire - 1 rue des Montagnes de Lans F-38130 Echirolles Phone: +33 (0) 476 099 696 Author: M Priddle Print date: 11-Apr-10 Updated: Page: 1 of 1 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.