LWB-103-3.0(10)

LWB-10X Issue 3 CUSTOMER DRAWING Jul. 2015 ECO-15-009743 Page 1 of 1 ® INSTALITE LIGHTWEIGHT SCREENING BRAID The complete requirements for procuring the wire described herein shall consist of this document. Plastic Former Braid - Copper Alloy Plating as below Braid Detail Part Description Nom. DC Resistance LWB-10X-3.0 LWB-10X-6.0 LWB-10X-10.0 LWB-10X-20.0 28.00 18.00 9.00 7.00 (mΩ/m) Coverage % Minimum 90.0 90.0 90.0 85.0 Nominal 93.7 91.3 96.4 86.0 Nominal Weight # (kg/km) 8.5 15.5 28.0 45.0 Recommended Diameter Range [mm] 3.0 to 4.5 4.5 to 8.0 8.0 to 15.0 15.0 to 25.0 '#' The nominal weight value excludes weight of former NOTE: The 'X' in the part number shall be replaced with the plating type as below: 1 = Tin plated conductor 3 = Nickel plated conductor The last number of the part depicts the nominal internal diameter of the braid, e.g. LWB-103-6.0 Nickel Plated Copper Alloy Braid with 6.0 mm nominal internal diameter. PERFORMANCE REQUIREMENTS: To be tested to and meet the requirements of the issue in effect of WSD 2516. Electronic sign off - no signatures will appear. APPROVAL: Tyco Electronics UK Ltd Faraday Road Dorcan SWINDON SN3 5HH Tel: +44 (0)1793 528171 Fax: +44 (0)1793 572516 INSTALITE® is a registered trademark of Tyco Electronics Corporation. TE TEConnectivity Connectivityisisaatrading tradingname nameofofTyco Tyco Electronics ElectronicsUK UKLtd, Ltd,which whichisisregistered registeredin in England Englandand andWales, Wales,number number550926. 550926. Registeredoffice: office:Faraday FaradayRoad, Road,Dorcan, Dorcan, Registered Swindon,SN3 SN35HH 5HH Swindon, Website: www.te.com Website: This drawing and the information set forth hereon are the property of Tyco Electronics UK Ltd, and are to be held in trust and confidence. Publication, duplication, disclosure or use for any purpose not expressly authorised in writing by Tyco Electronics UK Ltd is prohibited. This specification sheet takes precedence over documents referenced herein. As Tyco Electronics UK Ltd. reserve the right to make changes in construction without notice please contact Tyco Electronics UK Ltd to ensure that this document is the latest issue. ©2015 Tyco Electronics UK Ltd, a TE Connectivity Ltd. company. All Rights Reserved.