M323M-000004-070BG

M3200 Pressure Transducer SPECIFICATIONS      FEATURES      One Piece Stainless Steel Construction Digital Pressure and Temperature Output or Analog mV/Amplified Output Compact 17-4PH Stainless Steel Customizable APPLICATIONS         Pumps and Compressors Hydraulic/Pneumatic Systems Automotive Test Systems Energy and Water Management Medical Gas Pressure Leak Detection Remote Measuring Systems General Pressure Measurements SENSOR SOLUTIONS ///M3200 Analog Outputs (V/mA) 14-Bit Digital Output for Pressure and 11-Bit for Temperature CE Compliance Weatherproof 0.5% zero offset,1.5 % accuracy (Total error band) The M3200 pressure transducer from the Microfused line of TE is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. With excellent durability, there are no welds or organics exposed to the pressure media. TE’s proprietary Microfused technology, derived from demanding aerospace applications, employs micromachined silicon piezoresistive strain gages fused with high temperature glass to a stainless-steel diaphragm. This approach achieves media compatibility simply and elegantly while providing an exceptionally stable sensor without the PN junctions of conventional micromachined sensors. This product is geared towards industrial and commercial OEMs for small to high volume applications. Standard configurations are suitable for many applications. Please contact factory for your customization needs. 02/2021 Page 1 M3200 Pressure Transducer STANDARD RANGES Range (psi) 0 to 100 0 to 250 0 to 500 0 to 01k 0 to 2k5 0 to 05k 0 to 7k5 0 to 10k Range (bar) 0 to 007 0 to 017 0 to 035 0 to 070 0 to 170 0 to 350 0 to 500 0 to 700 Gage/Compound         PERFORMANCE SPECIFICATIONS (ANALOG) Unless otherwise specified: All parameters measured at 25°C PARAMETERS MIN Accuracy (Combined linearity, hysteresis & repeatability) TYP MAX UNITS -0.25 0.25 % F.S BFSL 0.5 NOTES Zero offset -0.5 Pressure Cycles 1.0E+6 0~F.S. Cycles Proof Pressure 2X Rated Burst Pressure 5X Rated ≤20kpsi Isolation, Body to Any Lead 50 MΩ @ 250VDC Voltage Output %F.S. @ 25°C Load Resistance (RL) >100 kΩ Load Resistance