MEAS
M5600
Wireless Pressure Transducer
FEATURES
• Heavy Industrial CE Approved
• ±0.25% Pressure Non-Linearity
• ±1.0% Total Error Band (TEB)
• -10 to 60°C Compensated Temperature
• Operating Temperature (Battery):
o -20 to 60°C (Panasonic/Energizer CR2032)
o -20 to 70°C (Sony/MuRata CR2032)
o -20 to 85°C (Murata CR2050W)
• Withstands 50g shock and maximal 10g
Vibration
• Excellent Long-term Stability
APPLICATIONS
•
Gas and Liquid Flow Measurements
•
Tank Liquid Level Measurements
•
Liquid and Gas Filter Monitoring
•
Corrosive Gases and Liquids
•
Remote and Hard to Reach Locations
•
Factory Process Control
•
Energy Generation and Management
•
316L or 17-4PH Stainless Steel Wetted Surfaces
•
Bluetooth 4.2 Wireless Communication
•
Pairing Mode or Advertising (Beaconing) Mode
•
32-Bit Digital Pressure Data Output
•
16-Bit Digital Temperature Data Output
•
Weatherproof IP65 Rating
•
Variety of Pressure Ports
•
CR2032/CR2050W Battery Compatible
The M5600 series from TE Connectivity’s Sensors Business
Unit sets the price and performance standard for wireless
pressure transducers used in demanding industrial and smart
factory applications.
The modular M5600 wireless pressure transducer from our
Microfused line is enclosed in a stainless steel and PBT
housing. This high accuracy, 24-bit ADC digital output
wireless transducer eliminates hard wiring and provides
remote process control and monitoring via Bluetooth® 4.2
Wireless Communication. This series is suitable for
measurement of liquid or gas pressure, even for difficult
media such as contaminated water, steam, and mildly
corrosive fluids.
The wetted surfaces of the pressure ports are made from
316L or 17-4PH stainless steel. The port design uses no
internal O-rings or organics exposed to the pressure media
which provides excellent durability and long-term
performance.
The M5601 is FM certified for Intrinsic Safety:
IS Class I, Div1, Groups A, B, C, and D;
Class I Zone 0, AEx ia IIC T4 Ga;
Ex ia IIC T4 Ga;
ll 1 G Ex ia IIC T4 Ga
FCC, ISED and RED compliant
TE CONNECTIVITY SENSORS /M5600 DATASHEET
DOC CONTROL NUMBER: MSI07562
REVISION E
Page 1
M5600 BLUETOOTH DIFFERENTIAL PRESSURE TRANSDUCER
STANDARD RANGES
Range (psi)
0 to 050
0 to 100
0 to 200
0 to 300
0 to 500
0 to 01k
0 to 03k
0 to 05k
0 to 10k
0 to 15k
Range (Bar)
0 to 3.5
0 to 007
0 to 014
0 to 020
0 to 035
0 to 070
0 to 200
0 to 350
0 to 700
0 to 01k
Gage
•
•
•
•
•
•
•
•
•
•
Sealed
Compound
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Intermediate ranges available upon request.
PERFORMANCE SPECIFICATIONS
Ambient Temperature: 25°C (unless otherwise specified) For custom configurations, consult factory.
Parameters
Min
Typ
Max
Units
Supply Voltage
2.3
Accuracy
-0.25
Resolution
3
Notes
3.6
VDC
Replaceable CR2032/CR2050
battery
0.25
%F.S.
RSS of linearity, hysteresis, and
repeatability
0.00005
%F.S.
Digital I2C
Output Protocol
A/D Resolution
24
Bit
Operating frequency
2.4
GHz
Cycle life
1.00E+6
0~FS Cycles
Stability
-0.25
0.25
%F.S./year
Total Error Band
-1
1
%F.S.
Proof Pressure
2X
20k psi
Rated
Burst Pressure
5X
20k psi
Rated
Compensated Temperature
-10
+60
°C
-20
+60
°C
CR2032 (Panasonic/Energizer)
-20
+70
°C
CR2032 (Sony/MuRata)
-20
+85
°C
CR2050W (MuRata)
-40
+120
°C
without battery
Operating Temperature
Storage Temperature
Wireless Protocol
Receiver Operating System
Signal Pairing Distance
Signal Transmission Distance
Battery Life
Low Battery Warning
Weatherproof
Pressure Port Material
Enclosure
Shock
Vibration
@25°C over compensated range
BLE4.2
Android™ 4.3 or above, iOS 7 or above, Windows® XP/7 or above
65 feet
65 feet affected by receiver antenna and blocking objects
1-year typical CR2032 210mAH battery; 1 minute transmission interval.
2-years typical CR2050W 350mAH battery, 1 minute transmission interval.
2.5VDC, red battery symbol in app
IP65
316L or 17-4PH Stainless Steel Port, 316L Stainless Steel Snubber
Stainless Steel and PBT
50g, 11msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A
10Hz to 55Hz, double amplitude 1.52mm, EIA-364-28F, Condition I
Note:
Battery life depends on its capacity, operating temperature and signal transmission interval.
Temperature can impact battery capacity retention even in idle. Check battery specifications for more details.
Factory default data transmission rate is 5sec, which can be adjusted from 100msec to 5sec in smartphone app or PC software.
TE CONNECTIVITY SENSORS /M5600 DATASHEET
DOC CONTROL NUMBER: MSI07562
REVISION E
Page 2
M5600 BLUETOOTH DIFFERENTIAL PRESSURE TRANSDUCER
COMPLIANCE
EN 55032 Emissions Class A & B
IEC 61000-4-2 Electrostatic Discharge Immunity (4kV contact/8kV air)
IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic Field Immunity (10V/m, 80M-1GHz); Shift
很抱歉,暂时无法提供与“M5600-000005-300PG”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+2254.17917
- 5+2186.55171
- 10+2120.95495