M6106/19-005

SERIES FCA-125 Tyco Electronics Mid-Range Military/Aerospace Relays 25 AMPERES, SPDT VED O R 9* P L AP R-6106/1 QPlified to MIL- ● HERMETICALLY SEALED ● ALL WELDED CONSTRUCTION ● BALANCED FORCE ● PERMANENT MAGNET DRIVE ● CONTACTS: SILVER CADMIUM Qua s. co m OXIDE WITH GOLD PLATING ● COILS FOR DC, 50 TO 400Hz AND 400Hz AC ● WEIGHT 1.6 OUNCES MAX. (45.4 GRAMS) nt * Meets new spec MIL-PRF-83536/36 and MIL-PRF-83536/37 m po ne The Series FCA-125 relay is a polarized single-side stable design, where the flux from a permanent magnet provides the armature holding force in the deactivated state, and its flux path is switched and combined with the coil flux in the operated state. This results in appreciably increased contact pressure in both states over that of a spring return nonpolar design. We also manufacture other versions of this relay: on lin e co FCA-325: 25 AMPERE 3PDT RELAY FCAC-325: 25 AMPERE 3PST RELAY WITH 2 AMPERE, SPDT AUXILIARY CONTACTS CONTACT RATING-AMPERES Ratings Are Continuous Duty TYPE OF LOAD LIFE (MIN.) CYCLES X 103 28 VDC 115VAC 400Hz 115VAC 60Hz * Resistive Inductive Inductive Motor Lamp 50 10 20 50 50 25 12 – 10 5 25 – 15 10 5 10 10 – 8 – * 60 Hz LOADS RATED FOR 10,000 OPERATIONS OVERLOAD CURRENT 50 AMPS DC, 80AMPS 400Hz RUPTURE CURRENT 60 AMPS DC, 100 AMPS 400Hz CONTACT MAKE BOUNCE 1 MILLISECOND AT NOMINAL VOLTAGE MAX. CONTACT DROP AT 25 AMPS: INITIAL 0.150 VOLTS. END OF LIFE 0.175 VOLTS 4 SERIES FCA-125 Tyco Electronics Mid-Range Military/Aerospace Relays 25 AMPERES, SPDT COIL DATA 20 Ω 80 Ω 320 Ω 320 Ω 920 Ω 180 mA 100 mA 40 mA 30 mA DC DC DC DC DC 400Hz 50/400Hz 400 Hz 50/400Hz 4.5 9.0 18.0 18.0 32.0 22.0 22.0 90.0 95.0 0.3 0.75 1.5 1.5 2.5 1.25 1.25 5.0 5.0 m 6 12 28 28 48 28 28 115 115 co 1 2 3 4 (A) 5 6 7 8 9 FREQ. Hz NOMINAL VOLTAGES s. COIL CODE OVER TEMPERATURE RANGE DC RES. DROPOUT OR MUST HOLD PICKUP OR AC AMPS (B) BELOW VOLTS ABOVE VOLTS VOLTAGE (C) 2.5 4.5 7.0 7.0 14.0 10.0 10.0 40.0 40.0 lin e on VIBRATION, SINUSOIDAL:* VIBRATION, RANDOM: * DIELECTRIC STRENGTH AT SEA LEVEL: m TEMPERATURE RATING: ALTITUDE: SHOCK:* co GENERAL SPECIFICATIONS po ne nt A. CODE 4 COILS HAVE BACK EMF SUPPRESSION D. MAX. OVERVOLTAGE: 6 & 12 VDC COILS 120% OF TO 42 VOLTS MAX. NOMINAL; ALL OTHERS 110% OF NOMINAL. B. DC COIL RESISTANCE ± 10% AT 25˚C; E. COILS AVAILABLE FOR OTHER VOLTAGES AND AC COIL MAX. CURRENT AT NOMINAL VOLTAGE. FOR AC 50/60HZ. C. RELAY WILL STAY IN PICKED-UP STATE DOWN TO MUST HOLD VOLTAGES SHOWN. NOTE: Only DC Coil Models are QPL Approved. Z, Y, & X ENCLOSURES W & M ENCLOSURES (STUD MTG.) Z, Y, & X ENCLOSURES W & M ENCLOSURES (STUD MTG.) Z, Y, & X ENCLOSURES W & M ENCLOSURES (STUD MTG.) ALL CIRCUITS TO GROUND AND CIRCUIT TO CIRCUIT. COIL TO GROUND DIELECTRIC STRENGTH AT 80,000 FEET: INSULATION RESISTANCE: -70˚C TO + 125˚C 300,000 FEET 200 g FOR 6 mS 100 g FOR 6 mS 30 g 33-3000Hz 20 g 33-3000Hz 0.4 g2/Hz 50-2000Hz 0.2 g2/Hz 50-2000Hz 1250 V rms 1000 V rms 350 V rms 100 MΩ MINIMUM INITIAL (500 VDC) AFTER LIFE OR ENVIRONMENTAL TESTS 50 MΩ MINIMUM OPERATE TIME AT NOMINAL VOLTAGE: DC RELAYS 10 ms OR LESS 15 ms OR LESS AC RELAYS RELEASE TIME AT NOMINAL VOLTAGE: DC RELAYS 10 ms OR LESS 50 ms OR LESS AC RELAYS * Max. contact opening under vibration or shock 10 microseconds 5 SERIES FCA-125 Tyco Electronics Mid-Range Military/Aerospace Relays 25 AMPERES, SPDT on lin e co m po ne nt s. co m Below are shown the standard terminal types and the enclosures available. Specify the assembly as indicated under How To Order. Dimensions are shown in inches ± .010 and (Millimeters ± .25). 6 SERIES FCA-125 Tyco Electronics Mid-Range Military/Aerospace Relays lin e co m po ne nt s. co m 25 AMPERES, SPDT on HOW TO ORDER FCA-125-A Y 4 (EXAMPLE) RELAY TYPE TERMINALS (Socket Pins, DC Coil) ENCLOSURE (With Flanges) COIL (28 VDC With Transient Suppression). NOTE: Only DC coil models are QPL Approved 7