MICRODOT and
NANONICS Connectors
MICRODOT and NANONICS Connectors
Tyco Electronics Corporation
Harrisburg, Pennsylvania
www.tycoelectronics.com
1308638 10M GIC CGX 8-05
MICRODOT and NANONICS Connectors
MICRODOT Connectors
Disclaimer
While Tyco Electronics has made every
reasonable effort to ensure the accuracy
of the information in this catalog, Tyco
Electronics does not guarantee that it is
error-free, nor does Tyco Electronics make
any other representation, warranty, or
guarantee that the information is accurate,
correct, reliable or current. Tyco
Electronics reserves the right to make any
adjustments to the information contained
herein at any time without notice. Tyco
Electronic expressly disclaims all implied
warranties regarding the information
contained herein, including but not limited
to any implied warranties or merchantability or fitness for a particular purpose.
It is recommended that you test any new
or replacement product before incorporating into a system.
The dimensions in this catalog are for
reference purposes only and are subject to
change without notice. Dimensions are in
inches over [millimeters], unless otherwise specified. Always consult our
customer drawings for recommended PC
board layout and panel cutout dimensions;
do not use catalog dimensions.
Specifications are subject to change without notice.
NANONICS Connectors
Consult Tyco Electronics at 1-800-5226752 for latest dimensions and design
specifications, or use our global contact
list shown on inside back cover.
© Copyright 2001 and 2005 by
Tyco Electronics Corporation.
All Rights Reserved.
COMBOMATE, DUALOBE, JACKMATE,
LEPRA/CON, MARC 53, MARC 63,
MARC 73, MICRODOT, NANONICS,
and TYCO are trademarks.
Other products, logos, and Company
names mentioned herein may be
trademarks of their respective owners.
MICRODOT and NANONICS Connectors
Main Table of Contents
MICRODOT
Microminiature D Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35
Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54
Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-90
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-136
NANONICS
DUALOBE Rectangular Connectors . . . . . . . . . . . . . . . . . . . . 141-178
Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179-196
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197-206
Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207-214
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215-218
i
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRODOT and NANONICS Connectors
Engineering Notes
ii
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRODOT Connectors
Table of Contents
Microdot Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Microminiature D Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
MCK/MCD/MCDM Series Metal and Plastic Shell Connectors . . . . . . . . . . . . . . . . . . . . . . 6
How To Specify MCK and MCD Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MCK Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MCK Series Metal Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . . . 10
MCD Series Plastic Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
MCD Series Plastic Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . . 13
Mounting and Coupling Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
MCK Transition Blocks
RT1 — Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18
ST1 — Straight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21
MCK ST2 Series Straight Mount PCB Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-24
MCDM Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26
MCDM Series Metal Shell RF COMBOMATE Connectors . . . . . . . . . . . . . . . . . . . . . . 27-29
MCDM Series Metal Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . 30
MIL-DTL-83513 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-35
Rectangular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TWIST Pin Contact Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
MCE Plastic
MCE Series Plastic Shell Edgeboard Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-41
Technical & Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Mother Board & Daughter Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
MCEM Metal Shell
MCEM Series Metal Shell Edgeboard Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 42-45
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
128 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44
How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
184 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
MCJ Plastic
MCJ Series Plastic Shell Center Jackscrew Connectors . . . . . . . . . . . . . . . . . . . . . 46, 47
10 & 14 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
26, 38 & 46 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
MCJM Metal Shell
MCJM Series Metal Shell Center Jackscrew Connectors. . . . . . . . . . . . . . . . . . 46, 48, 49
Technical & Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Plug & Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49
How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
1
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRODOT Connectors
Table of Contents (Continued)
MCS .050 [1.27] Centerline
MCS Series Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Strip Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
High Density Standard Module (HDSM) Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . 51-54
Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-92
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56
MARC 43
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Polarizing Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Shell Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-62
Cable Clamps, Contacts, Sealing Plugs,
Protective Covers & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
MARC 53
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Polarizing Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Shell Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-71
Test Adapters, Protective Covers, Cable Clamps
& Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 73
MARC 63
Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76
Cable Clamps, Protective Covers & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MARC 43, 53, 63
Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-80
MARC 43, 53, 63, 73
Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
MARC 73
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83
Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85
Cable Clamps, Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 86
MQR Series – Microminiature Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88
MTC Series – Microminiature Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90
2
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRODOT Connectors
Table of Contents (Continued)
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-136
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Standard Coaxial Connectors
Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Screw-On Series (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-98
Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-102
Quick-Connect Series (QC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103-105
Twinax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Triax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Module Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Caps For Screw-On Jacks and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Feed Thru Adapters, Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
BNC/TNC Adapters to:
Screw-On Series (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110, 111
Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Quick-Connect (QC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Gold Plated Crimp Style Coaxial Connectors
Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Screw-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113-116
Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
LEPRA/CON Ultra Miniature Connectors
Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Screw-On Series — Standard Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118, 119
Screw-On Series — Locking Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121
Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122, 123
Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
BNC / LEPRA/CON Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125
Snap-Lock Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Cable Assemblies
Ordering Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Mating Interface Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Cable Acceptance Dimensions
Standard Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129-133
Gold Plated Crimp Style Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133, 134
LEPRA/CON Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Hermetic Connectors
Coaxial Screw-On, Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135, 136
3
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRODOT Connectors
MICRODOT Introduction
MICRODOT Connector
products have a fifty-year
heritage of leadership in
precision design and manufacturing of innovative and
cost-effective interconnects.
These innovative and costeffective products offer
interconnect solutions for a
broad range of applications
in the Aerospace, Military,
Medical, Instrumentation,
Communications and
Computer markets.
The MICRODOT reputation
for hands-on experienc
and outstanding technical
support is now enhanced
as part of Tyco Electronics
Corporation.
From standard Mil-Spec
configurations to custom
designs, we have the
Micro-D, subminiature and
ultra-miniature coaxial,
custom hermetic and
space-related cylindrical
connectors to meet your
need, whether it is build-toprint assemblies, or total
turn-key assembly program
management. MICRODOT
connectors have met the
rigorous demands imposed
in manned space flight,
military and commercial
satellites, critical medical
applications, and geophysical exploration.
4
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
Microminiature D Connectors
Microminiature D
Connectors
Product Facts
n
n
n
n
n
n
Designed for both military
and commercial applications
Low engaging force is
achieved by the manner in
which Twist Pin Contacts are
designed
The metal shell and plastic
shell are available with
solder cup and solid or
stranded wire terminations
1
Mating force maximum is
10 oz. [2.78N] times the
number of contacts
Durability — No known
mechanical or electrical
issues detrimental to the
function of the connectors
after 500 cycles of mating
and unmating
Current Rating — 3 amps
max per contact
MICRODOT Connectors
MCK and MCD High Density
Microminiature “D”
Connectors described in
this catalog comprise a
complete connector system, which is adaptable to
a numerous variety of form
factors. Low engaging force
is achieved by the manner
in which the twist pin
contacts are designed.
By constructing the male
contact as a breathing
helical spring, electrical
contact is achieved at many
points around the periphery
of the pin bundle rather
than at a few discrete
points, as in conventional
pin designs. Normal twist
pin engagement force is
6 oz. [1.67N] typically and
8 oz. [2.22N] maximum. The
low force twist pins exhibit
an engaging force of 4 oz.
[1.11N] typically and 5 oz.
[1.39N] maximum. Low
force twist pins are standard
in MIL-DTL-83513 configurations of MCK and MCD
connectors and may be
supplied as an option in all
other configurations.
The MCK and MCD Series
of connectors featured in
this catalog are designed to
meet the applicable requirements of MlL-DTL-83513,
for intermateability, interchangeability, and
performance. Designed for
both military and commercial applications, the MCK’s
and MCD’s are especially
well suited for use in miniaturized airborne and space
electronics, computers, and
test equipment. The metal
shell MCK’s and plastic
shell MCD’s are available
with solder cup, and solid or
stranded wire terminations.
MCK transition blocks are
standard for printed circuit
board mounting. Custom
termination configurations
for both MCK and MCD
can be accommodated.
Micro D’s are also supplied
in wired harness assemblies.
5
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK/MCD/MCDM Series Metal and Plastic Shell Connectors
Technical and Performance Data
(Applicable to MCK, MCD and MCDM unless otherwise noted)
Electrical
Environmental
Contacts — Pin 24 AWG twist pin,
Socket 24 AWG precision machined
barrel, Wire Range 24 AWG to 30 AWG
solid and stranded.
Temperature Range —
-67°F to 257°F [-55° C to +125°C] for
MCK/MCD, -67°F to 302°F [-55°C to
+150°C] for MCDM.
Contact Resistance — (voltage drop)
25 millivolts max. at 3 amps, 77°± 7.4°F
[25°± 3° C].
Vibration — No discontinuity in
excess of 1 µ sec. when tested in accordance with MIL-STD-1344, Method
2005, test Condition IV.
Current Rating — 3 amps max. per
contact.
Dielectric Withstanding Voltage —
Volts RMS 60 Hz at room ambient.
At sea level 600V solder pots, 750V wire
terminations & transition blocks.
At 70,000 ft. [21,336 m] 150V solder
pots, 200V wire terminations & transition blocks.
Insulation Resistance — 5,000
megohms min. (@ 500 VDC) at ambient
room temperature.
Magnetic Permeability — 2 mu max.
Mechanical
Contact Spacing — .050 [1.27mm]
centers.
Contact Engagement &
Separation — Standard contact
engaging force is 6.0 oz. [1.67N] (8.0 oz.
[2.22N] max.). Separation force is 0.5
[.14N] oz. min.
Mating Force Maximum —
Calculated as 10 oz. times the number
of contacts.
Solderability — Connectors shall
pass the test requirements of MIL-STD202, Method 208
Shock — No discontinuity in excess of
1 µ sec. when tested in accordance with
MIL-STD-1344, Method 2004, test
Condition E.
Durability — No mechanical or electrical defects detrimental to the function of
the connectors after 500 cycles of mating and unmating.
Humidity — After exposure to humidity as specified by MIL-STD-1344,
Method 1002, Type II, IR shall be 1
megohm min. following step 7a of
Method 1002 and 1000 megohms min.
after 24 hours of conditioning per
Method 1002.
Salt Spray — Connectors shall meet
the performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subjected to the 48-hour 5% solution salt spray
test per MIL-STD-1344, Method 1001,
Condition B.
Fluid Immersion — Unmated connectors after being fully immersed in one
of the following fluids, for the prescribed
time, will mate at a force of 10 oz.
[2.78N] times the number of contacts
or less: Perchloroethylene, 2 hours;
Lubricating oil per MIL-L-23699,
20 hours.
Insert Retention — Inserts will withstand a 50 lb. [34N/cm2] per square inch
load in either direction.
Crimp Termination Tensile
Strength — (Unassembled contacts
with crimped stranded wire terminations)
Wires will not pull out of contacts when
the following axial loads are applied:
24 AWG, 5 lbs. [22.24N]; 26 AWG,
4 lbs. [17.79N]; 28 AWG, 3 lbs.
[13.34N]
Outgassing — When tested in accordance with SP-R-0022, Total Mass Loss
(TML) shall be less than 1.0% and
Volatile Condensable Material (VCM)
shall be less than 0.1% of the original
specimen.
Materials and Finishes
Contacts — Copper alloy plated with
.000050 [.00127] gold over copper flash
per MIL-G-45204 Type II.
Hardware — see pages 14 and 15.
Transition Block Shell —
Liquid crystal polymer (LCP) per ASTM
D5138, or Polyphenylene sulfide
GST-40F per ASTM D5927 or
MIL-M-24519
Potting Material — Epoxy, Black
MCD-Plastic Shell —
Insulator/Body — Polyester, glass filled
per MIL-M-24519, Liquid crystal
polymer (LCP) per ASTM D5138, or
Polyphenylene sulfide GST-40F per
ASTM D5927 or MIL-M-24519
Wire Terminations —
Solid copper per QQ-W-343 gold plated
per MIL-G-45204
Stranded TEFLON insulated per MIL-W16878
Stranded TEFLON insulated per MIL-W22759/11, /33
Solid copper per QQ-W-343, solder
dipped (Transition block)
MCDM-Metal Shell —
Insulator — Diallyl Phthalate per MILM-14, Type SDG-F
Body Shell — Aluminum alloy—high
grade, nickel plated
MCK-Metal Shell —
Insulator — Liquid crystal polymer
(LCP) per ASTM D5138, or
Polyphenylene sulfide GST-40F per
ASTM D5927 or MIL-M-24519
Interfacial Seal — Fluorosilicone Rubber
per MIL-R-25988 (socket side only)
Body Shell — Aluminum alloy-high
grade plated
Cadmium per QQ-P-416
Nickel, electroless per AMS 2404
Twist Pin, Pin and Socket
Contacts
The contact spring member
normally found in socket
contacts has been eliminated by creating a breathing
helical spring principle on
the pin contact — smaller,
more durable contacts
can be manufactured
economically.
Wire range 24-36 AWG solid & stranded.
MIL-DTL-83513 — Only the descriptive legend in bold italic is applicable to current MIL-DTL-83513 configurations;
MIL-DTL-83513/1 through /4 — MCK metal shell; MIL-DTL-83513/6 through /9 — MCD plastic shell.
In addition, MIL-DTL-83513 solid copper wire termination is specified 25 AWG, 0.5; and 1.0 [25.4] lengths only and
stranded insulated wire termination is specified 26 AWG, 18.0 [457.2] and 36.0 [914.4] lead lengths only. Hardware for
MIL-DTL-83513 configurations is specified separately by the M83513/5-XX designation. M83513/1 through /4 and /6
through /9 specify no hardware (B). Mounting/mating hardware is shown on page 14 with the applicable military
nomenclature. The MICRODOT catalog part number for a MIL-DTL-83513 configuration may be constructed
to include the desired hardware.
See pages 31-35 for M83513/ cross reference.
6
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
How To Specify MCK and MCD Connectors
Microminiature D
Connectors
Metal Shell
S — Solder pots 26 AWG max.
X — Special, not described by legend.
MCK-
C2
B
37
P
6
A
1
18.0
Lead Length in Inches (Min.)
Connector Series
Shell Finish
Insulation Color or Finish
C1 — Cadmium, Clear
C2 — Cadmium, Yellow Chromate
N1 — Nickel, Electroless
1 — All white wire
6 — Bare (unfinished)
2 — All yellow wire
7 — Color coded per MIL-STD-681, System 1
3 — All gray wire
8 — Special color code
4 — Gold plated
9 — 10 Solid color repeating per M-83513
5 — Tin dipped gold plated
Hardware (See Pages 14 and 15)
B
— No Hardware
F
— Float Bushing
K, KM — Jackscrew, Slotted Head, High Profile (9-51)
H, HM — Jackscrew, Slotted Head, High Profile (100)
L, LM — Jackscrew, Slotted Head, Low Profile (9-51)
J, JM — Jackscrew, Slotted Head, Low Profile (100)
Q, QM — Jackscrew, Allen Head, High Profile (9-51)
T, TM — Jackscrew, Allen Head, High Profile (100)
R, RM — Jackscrew, Allen Head, Low Profile (9-51)
N, NM — Jackscrew, Allen Head, Low Profile (100)
P
— Jackpost Assembly (9-51)
S
— Jackpost Assembly (100)
X
— Lockscrew, Slotted Head
Y
— Lockscrew, Allen Head
Z
— Clip and Key (Clip Mount Only)
1
Wire Type
Per MIL-W-16878
{
A — Type E, 7 strand
B — Type ET, 7 strand
C — Type E, 19 strand
D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(28 AWG only)
G — 19 strand per MIL-C-22759/11
(26 AWG only), 24 AWG
L — Copper, Solid
(25 AWG only)
Q — Stranded per MIL-W-22759/33
(26 AWG only)
Wire Size
4 — 24 AWG 5 — 25 AWG 6 — 26 AWG 8 — 28 AWG 0 — 30 AWG
Layout
9, 15, 21, 25, 31, 37, 51, 100
See contact arrangement
Contact Type
P — Pin (Plug)
S — Socket (Receptacle)
Plastic Shell
S — Solder pots 26 AWG max.
X — Special — Does not fit description below.
MCD
R3
B
37
P
6
A
1
18.0
Lead Length in Inches (Min.)
Connector Series
Insulator Type/Material
Insulation Color or Finish
G2 — Clip Mount, polyester, natural
G3 — Screw Mount, polyester, natural, .093 Flg.
R2 — Clip Mount, Ryton
R3 — Screw Mount Liquid Crystal Polymer
or Polyphenylene Sulfide
1 — All white wire
6 — Bare (unfinished)
2 — All yellow wire
7 — Color coded per MIL-STD-681, System 1
3 — All gray wire
8 — Special color code
4 — Gold plated
9 — 10 Solid color repeating per M-83513
5 — Tin dipped gold plated
Wire Type
Hardware (See Pages 14 and 15)
B
— No Hardware
F
— Float Bushing
K, KM — Jackscrew, Slotted Head, High Profile
L, LM — Jackscrew, Slotted Head, Low Profile
Q, QM — Jackscrew, Allen Head, High Profile
R, RM — Jackscrew, Allen Head, Low Profile
P
— Jackpost Assembly
X
— Lockscrew, Slotted Head
Y
— Lockscrew, Allen Head
Z
— Clip and Key (Clip Mount Only)
Per MIL-W-16878
{
A — Type E, 7 strand
B — Type ET, 7 strand
C — Type E, 19 strand
D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(28 AWG only)
G — 19 strand per MIL-C-22759/11
(26 AWG only), 24 AWG
L — Copper, Solid
(25 AWG only)
Q — Stranded per MIL-W-22759/33
(26 AWG only)
Layout
Wire Size
9, 15, 21, 25, 31, 37, 51
See contact arrangement
4 — 24 AWG 5 — 25 AWG 6 — 26 AWG 8 — 28 AWG 0 — 30 AWG
Contact Type
P — Pin (Plug)
S — Socket (Receptacle)
Note: Items in bold italic are qualified to MIL-DTL-83513.
7
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
Contact Arrangements
Face View of Pin Insert
(Socket Side is Mirror Image)
1
1
5
9
6
9
12
15
15 Contacts
9 Contacts
11
1
8
1
8
9
15
23
13
1
1
16
14
25
25 Contacts
21
21 Contacts
17
24
30 Contacts
(MCDM Only)
30
16
31
31 Contacts
1
1
18
19
19
20
37 Contacts
37
35
36
51 Contacts
51
26
1
27
51
75
52
100
76
100 Contacts
(MCK Only)
Note: MCK metal shells are not designed to intermate or interchange with MCD plastic shells. If metal/plastic intermating is desired, use MCDM Series Metal
Shell on pages 25 and 26 with MCD Series Plastic Shell on page 11.
8
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK Series Metal Shell Connectors
Two Mtg. Holes
Ø.092±.004 (9-51 )
[2.34±0.10]
F
Contact #1
Ø.145 – .150 (100 )
[3.68 – 3.81
]
Pin
Microminiature D
Connectors
Dimensions per
MIL-DTL-83513
E
A
.183±.003
[4.65±0.08]
B
.406±.010
[10.31±0.25]
Crimp or Solder
1
Pin
Pin
.093±.005
[2.36±0.13]
Plug
(Pin side)
C
D
F
Contact 1
#
oTw Mtg. Holes
Ø.092±.004 (9-51 )
[2.34±0.10]
Socket
Ø.145 – .150(100 )
[3.68 – 3.81
]
E
A
.195±.003
[4.95±0.08]
B
Receptacle
(Socket side)
.419±.010
[10.64±0.25]
Crimp or Solder
Socket
Socket
.093±.005
[2.36±0.13]
D
C
Part
Number
A
± .010 [.254]
MCK**- 9P***
.775
19.68
.775
19.68
.925
23.50
.925
23.50
1.075
27.30
1.075
27.30
1.175
29.84
1.175
29.84
1.325
33.66
1.325
33.66
1.475
37.46
1.475
37.46
1.425
36.20
1.425
36.20
2.160
54.86
2.160
54.86
MCK**- 9S***
MCK**- 15P***
MCK**- 15S***
MCK**- 21P***
MCK**- 21S***
MCK**- 25P***
MCK**- 25S***
MCK**- 31P***
MCK**- 31S***
MCK**- 37P***
MCK**- 37S***
MCK**- 51P***
MCK**- 51S***
MCK**- 100P***
MCK**- 100S***
B Max.
.3338
8.48
.4018
10.21
.4838
12.29
.5518
14.02
.6338
16.10
.7018
18.05
.7338
18.64
.8018
20.37
.8838
22.45
.9518
24.18
1.0338
26.26
1.1018
27.99
.9838
24.99
1.0518
26.72
1.3838
35.15
1.508
38.30
C
+.010 [.254]
-.018 [.457]
.390
9.91
.390
9.91
.540
13.72
.540
13.72
.690
17.53
.690
17.53
.790
20.07
.790
20.07
.940
23.88
.940
23.88
1.090
27.69
1.090
27.69
1.040
26.42
1.040
26.42
1.432
36.37
1.432
36.37
D Max
E
±.010 [.254]
F
± 005 [.127]
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.310
7.87
.310
7.87
.360
9.15
.360
9.15
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.341
8.66
.341
8.66
.384
9.75
.384
9.75
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.71
1.800
45.71
P = Pin, S = Socket
9
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK Series Metal Shell Connectors Panel Mounting — Cutout Dimensions
Panel Mounting
Dimensions — MCK
.395
[10.03]
.200
[5.08]
Plug and Receptacle
Rear Mounted
.300
[7.62]
Plug Front Mounted
Receptacle Rear Mounted
Plug and Receptacle
Front Mounted
Panel Cutout Dimensions — MCK
.095
[2.41]
C
Full Radius
(Typ.)
9-51
B
A
R
.015 Max.
[.381] Typ.
Figure 1
Front Mounting
Number
of
Contacts
1
C
.095
[2.41]
Full Radius
(Typ.)
A
9-51
Fig.
9
2
1
B
15
2
+ .005
R
.101 – .000
4 Plcs.
+ .127
[2.56 – .000 ]
116 Typ.
1
Figure 2
Rear Mounting
21
1.810/1.805
[45.98/45.85]
25
2
1
.122
[3.10]
2
1
100
Full Radius
(Typ.)
1.448 .002
[36.83/36.73]
.369/.364
[9.37/9.24]
R
.015 Max.
[.381] Typ.
31
2
1
37
2
Front Mounting
1
51
2
.122
[3.10]
1.810/1.805
[45.98/45.85]
100
Full Radius
(Typ.)
1.514 .002
[38.51/38.40]
A
+ .004 [.102]
– .000 [.000]
.404
10.26
.406
10.31
.554
14.07
.556
14.12
.704
17.88
.706
17.93
.804
20.42
.806
20.47
.954
24.23
.956
24.28
1.104
28.04
1.106
28.09
1.054
26.77
1.056
26.82
B
+ .004 [.102]
– .000 [.000]
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.314
7.98
.300
7.62
C
+ .005 [.127]
– .000 [.000]
.570
14.48
.570
14.48
.720
18.29
.720
18.29
.870
22.10
.870
22.10
.970
24.64
.970
24.64
1.120
28.45
1.120
28.45
1.270
32.26
1.270
32.26
1.220
30.99
1.220
30.99
.403/.398
[10.24/10.11]
R .055 Max.
[1.40] Typ.
Rear Mounting
10
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCD Series Plastic Shell Connectors
Microminiature D
Connectors
Screw Mount
Dimensions Per
MIL-DTL-83513
F
Contact #1
Two Mtg. Holes
Ø.092±.004
[2.34±.10]
Pin
E
A
.199±.005
[5.05±.13]
B
.395 /.360
[10.0 3/ 9.14]
Crimp or Solder
Pin
1
Pin
.094±.006
[2.39±0.15]
D
C
Plug
(Pin side)
o
w
T
F
Contact 1
#
Mtg. Holes
Ø.092±.004
[2.34±0.10]
Socket
E
A
.180±.005
[4.57±0.13]
B
Receptacle
(Socket side)
.375 /.340
[9.52 /8.64]
Crimp or Solder
Socket
Socket
.094±.006
[2.39±0.15]
Liquid Crystal Polymer or
Polyphenylene Sulfide — MCDR3* per
MIL-DTL-83513
D
C
Note: MCD Plastic Screw Mount Series is intermateable with MCDM Metal Series Connectors (Pages 25 and 26).
Part
Number
A
± .010 [.254]
B Max.
MCD**- 9P***
.778
19.76
.778
19.76
.928
23.57
.928
23.57
1.078
27.38
1.078
27.38
1.178
29.92
1.178
29.92
1.328
33.73
1.328
33.73
1.478
37.54
1.478
37.54
1.428
36.27
1.428
36.27
.2918
7.412
.3798
9.647
.4418
11.222
.5298
13.457
.5918
15.032
.6798
17.267
.6918
17.572
.7798
19.807
.8418
21.382
.9298
23.617
.9918
25.192
1.0798
27.427
.9418
23.922
1.0298
26.157
MCD**- 9S***
MCD**- 15P***
MCD**- 15S***
MCD**- 21P***
MCD**- 21S***
MCD**- 25P***
MCD**- 25S***
MCD**- 31P***
MCD**- 31S***
MCD**- 37P***
MCD**- 37S***
MCD**- 51P***
MCD**- 51S***
C
+.010 [.254]
-.018 [.457]
.398
10.11
.398
10.11
.548
13.92
.548
13.92
.698
17.73
.698
17.73
.798
20.27
.798
20.27
.948
24.08
.948
24.08
1.098
27.89
1.098
27.89
1.048
26.62
1.048
26.62
D Max
E
±.010 [.254]
F
± 005 [.127]
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.220
5.59
.220
5.59
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.250
6.35
.250
6.35
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
Avg. Weight
lbs. ± 5%
[grams]
.0017
0.77
.0016
0.72
.0024
1.08
.0023
1.04
.0035
1.59
.0034
1.54
.0042
1.90
.0037
1.67
.0053
2.40
.0048
2.17
.0057
2.58
.0051
2.31
.0072
3.26
.0063
2.85
P = Pin, S = Socket
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
*See “How to Specify” for description, on page 7.
11
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCD Series Plastic Shell Connectors (Continued)
Clip Mount — MCD
.019
[.483]
.093 ± .003
[2.44 /2.29]
Contact #1
Pin
E
A
.199
[5.05]
B
.395 /.360
[10.03 /9.14]
Crimp or Solder
Pin
Pin
.060
[1.52]
Plug
(Pin side)
D
C
.093 ± .003
[2.44 /2.29]
.019
[.483]
Contact #1
Socket
E
A
.180
[4.57]
B
.375 /.340
[9.52 /8.64]
Receptacle
(Socket side)
Crimp or Solder
Socket
Socket
.060
[1.52]
Note: Clip Mount not covered by
current issue of MIL-DTL-83513.
D
C
Part
Number
A
±.005 [.127]
B Max.
C
±.010 [.254]
D
±.010 [.254]
E
±.005 [.127]
MCD**- 9P***
.506
12.85
.506
12.85
.656
16.66
.656
16.66
.806
20.47
.806
20.47
.906
23.01
.906
23.01
1.056
26.82
1.056
26.82
1.206
30.63
1.206
30.63
1.156
29.36
1.156
29.36
.2918
74.12
.3798
96.47
.4418
112.22
.5298
134.57
.5918
150.32
.6798
172.67
.6918
175.72
.7798
198.07
.8418
213.82
.9298
236.17
.9918
251.92
1.0798
274.27
.9418
239.22
1.0298
261.57
.398
10.11
.398
10.11
.548
13.92
.548
13.92
.698
17.73
.698
17.73
.798
20.27
.798
20.27
.948
24.08
.948
24.08
1.098
27.89
1.098
27.89
1.048
26.62
1.048
26.62
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.250
6.35
.250
6.35
MCD**- 9S***
MCD**- 15P***
MCD**- 15S***
MCD**- 21P***
MCD**- 21S***
MCD**- 25P***
MCD**- 25S***
MCD**- 31P***
MCD**- 31S***
MCD**- 37P***
MCD**- 37S***
MCD**- 51P***
MCD**- 51S***
Avg. Weight
lbs. ± 5%
[grams]
.0017
0.77
.0016
0.72
.0024
1.08
.0023
1.04
.0035
1.59
.0034
1.54
.0042
1.90
.0037
1.67
.0053
2.40
.0048
2.17
.0057
2.58
.0051
2.31
.0072
3.26
.0063
2.85
P = Pin, S = Socket
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
*See “How to Specify” for description, on page 7.
12
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCD Series Plastic Shell Connectors Panel Mounting — Cutout Dimensions
Microminiature D
Connectors
Panel Mounting Dimensions — MCD
Screw Mount
Clip Mount
.200±.005
[5.08±0.13]
.200±.005
[5.08±0.13]
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Front Mounted
Plug and Receptacle
Front Mounted
.300±.005
[7.62±0.13]
.265±.005
[6.73±0.13]
Plug Front Mounted
Receptacle Rear Mounted
Plug Front Mounted
Receptacle Rear Mounted
Panel Cutout Dimensions — MCD
Number
of
Contacts
Screw Mounting
Clip Mounting
9
A
B
.005
.089 +– .000
0.13
]
[2.26 +– 0.00
C
B
R .015 Max.
[.381] Typ.
15
A
Full
Radius
(Typ.)
Front
Front
Figure 1
R .015
[.381]
Max. Typ.
21
Figure 2
25
C
A
B
.089
[2.26]
A
B
R .015 Max.
[.381] Typ.
Full
Radius
(Typ.)
1
.395±.005
[10.03±0.13]
.330±.005
[8.38±0.13]
R
.075
[1.90
+ .005
– .000
+ 0.13
– 0.00 ]
Rear
Rear
Figure 3
Figure 4
31
116 Typ.
37
51
Notes: Front mounting preferred.
Fig.
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
A
+ .004 [.102]
– .000 [.000]
.438 [11.13]
.412 [10.46]
.438 [11.13]
.384 [9.75]
.588 [14.93]
.562 [14.27]
.588 [14.93]
.534 [13.56]
.738 [18.75]
.712 [18.08]
.738 [18.75]
.684 [17.37]
.838 [21.29]
.812 [20.62]
.838 [21.29]
.784 [19.91]
.988 [25.10]
.962 [24.43]
.988 [25.10]
.934 [23.72]
1.138 [28.91]
1.112 [28.24]
1.138 [28.91]
1.084 [27.53]
1.088 [27.64]
1.062 [26.97]
1.088 [27.64]
1.034 [26.26]
B
+ .004 [.102]
– .000 [.000]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.224 [5.69]
.224 [5.69]
.264 [6.71]
.264 [6.71]
C
+ .005 [.127]
– .000 [.000]
—
.570 [14.48]
—
.570 [14.48]
—
.720 [18.29]
—
.720 [18.29]
—
.870 [22.10]
—
.870 [22.10]
—
.970 [24.64]
—
.970 [24.64]
—
1.120 [28.45]
—
1.120 [28.45]
—
1.270 [32.26]
—
1.270 [32.26]
—
1.220 [30.99]
—
1.220 [30.99]
13
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
Mounting and Coupling Hardware
For Screw Mount MCK,
MCD and MCDM
9-51 Contacts
Slot Head
(K)
(KM)
(L)
(LM)
(P)
Ø .156 Max.
[3.96] Over Knurl
Jackscrew
Retaining
Ring
.600
[15.24]
Ø .125
[3.18]
Jackscrew
.853 ± .015
[21.67 ± 0.38]
Part Number 5-1532137-8
Jackscrew Assembly
High Profile
(K) 096-0002-0010
M83513/5-06
(KM) S96-0002-0084
(Q)
(QM)
Jackscrew
.600
[15.24]
Ø .125
[3.18]
.340–.360
[8.64–9.14]
Part Number 5-1532137-5
Jackscrew Assembly
Low Profile
(R) 096-0002-0015
M83513/5-02
(RM) S96-0002-0087
(J)
(JM)
.585
[14.86]
Ø .187
[4.75]
.100
[2.54]
Jackscrew
.920 Max.
[23.37]
Retaining
Ring
.415 Max.
[10.54]
.112-40UNC-2A
[2.84]
.112-40UNC-2A
[2.84]
Part Number 6-1532137-3
Jackscrew Assembly
High Profile
(H) 096-0002-0061
M83513/5-16
(HM) S96-0002-0088
(T)
(TM)
Part Number 6-1532137-2
Jackscrew Assembly
Low Profile
(J) 096-0002-0062
M83513/5-15
(JM) S96-0002-0089
(N)
(NM)
Ø .200 Max.
[3.96] Over Knurl
Jackscrew
Retaining
Ring
Part Number 5-1532137-9
Jackpost Assembly
(P) S96-0002-0009
M83513/5-07
P mates with K,KM, L,LM, Q,QM
and R,RM Jackscrew Assemblies.
.098
[2.29]
Retaining
Ring
Ø .200 Max.
[3.96] Over Knurl
100 Contacts
1/16" Allen Head
.086-56UNC-2A
[2.18]
.086-56UNC-2A
[2.18]
(H)
(HM)
Jackscrew
.475
[12.07]
Jackscrew
.853 ± .015
[21.67 ± 0.38]
Part Number 5-1532137-6
Jackscrew Assembly
High Profile
(Q) 096-0002-0014
M83513/5-03
(QM) S96-0002-0086
Retaining
Ring
Lockwasher
.187
[4.75]
(R)
(RM)
.086-56UNC-2A
[2.18]
100 Contacts
Slot Head
.086-56UNC-2B
[2.18]
Bushing
Hex Nut
Part Number 5-1532137-7
Jackscrew Assembly
Low Profile
(L) 096-0002-0011
M83513/5-05
(LM) S96-0002-0085
Ø .156 Max.
[3.96] Over Knurl
Retaining
Ring
.125 Hex.
[3.18]
.340–.360
[8.64–9.14]
Retaining
Ring
.086-56UNC-2A
[2.18]
.086-56UNC-2A
[2.18]
9-51 Contacts
1/16" Allen Head
.098
[2.29]
.585
[14.86]
(S)
Ø .187
[4.75]
.100
[2.54]
Jackscrew
.920 Max.
[23.37]
Retaining
Ring
.415 Max.
[10.54]
.112-40UNC-2A
[2.84]
.112-40UNC-2A
[2.84]
Part Number 6-1532137-1
Jackscrew Assembly
High Profile
(T) 096-0002-0064
M83513/5-13
(TM) S96-0002-0090
Notes:
1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel.
2. Letter(s) in parentheses is to assist
in ordering hardware with the connector (See “How To Specify”
page 7).
3. Single letters (e.g. K) designate
hardware kits (2 pcs. per kit) that
meets M83513/05 requirements
except the material is 303 stainless steel, passivated.
4. Add M suffix (e.g. KM) to designate hardware that meets all
M83513/05 requirements.
Material is corrosion resistant
steel, non-magnetic, 125,000 PSI
tensile strength minimum (Applies
to jackscrews only).
5. Non-MIL hardware ordered separately should be ordered in pairs;
i.e. 2 pcs. P/N 096-0002-0009 per
connector half.
6. Items in bold italic are qualified to
MIL-DTL-83513.
Part Number 6-1532137-0
Jackscrew Assembly
Low Profile
(N) 096-0002-0065
M83513/5-12
(NM) S96-0002-0091
.187 Hex.
[4.75]
.112-40UNC-2B
[2.84]
Bushing
Lockwasher
Hex Nut
.185 Max.
[4.70]
.475
[12.07]
.112-40UNC-2A
[2.84]
Part Number 6-1532137-4
Jackpost Assembly
(S) S96-0002-0060
M83513/5-17
S mates with H,HM, J,JM, T,TM and
N,NM Jackscrew Assemblies.
14
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
Mounting and Coupling Hardware (Continued)
Slot Head
1/16" Allen Head
(X)
(Y)
Ø .125
[3.18]
Lockscrew
.075
[1.91]
Lockscrew
Retaining Clip
Retaining Clip
.086 -56UNC-2A
[2.18]
.086 -56UNC-2A
[2.18]
Part Number 4-1532137-3
Lockscrew Assembly
096-0002-0008
For Clip Mount — MCD
Ø .125
[3.18]
.075
[1.91]
Microminiature D
Connectors
For Screw Mount MCK,
MCD and MCDM (Continued)
.343 ± .010
[8.71 ± 0.25]
1
Part Number 1495164-1
Lockscrew Assembly
096-0002-0013
(Z)
.600
[15.24]
.356
[9.04]
Part Number 1466018-1
Mounting Key and Clip
P/N 096-0001-0000
(2 Required)
For Float Mount — MCK,
MCD and MCDM
(F)
Washer
Bushing
Float Mount Bushing
(Factory Installed)
Notes:
1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel.
2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See “How To Specify” page 7).
3. Hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N 096-0002-0013 per connector half.
15
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK Transition Blocks
RT1 — Right-Angle
Termination Configuration
A
Optional Jackpost (2 Plcs.)
For 9 Thru 51: .086-56 UNC-2B
For 100: .112-40 UNC-2B
B
C
D
MIL-DTL-83513/10 through /21
configurations. 90° — Lo Profile
termination configurations.
See pages 31-35 for M83513
cross references.
Mounting Surface
Contact #1
(Pin Connectors)
Contact #1
(Socket Connectors)
.109 ±.015
[2.77 ±0.39]
.190 Max.
.185 Max.
[4.83] (Sizes 9-51) [4.70] (Size 100 only)
F
F
E
G
Mounting Surface
.096±.003 Dia.
[2.44±0.08] Typ.
MCK
C2
P
37
P
.096±.003 Dia.
[2.44±0 .08] Typ.
Mounting
Surface
9, 15, 21 & 25 Contacts
How To Specify
G
E
H
31, 37, 51 & 100 Contacts
.125±.003 Dia.
[3.18±0 .08] Typ.
(Size 100 Only)
RT1
Right Angle Termination (Solder Dipped)
RT1 — w/ .109 Leads
RT1A — w/ .140 Leads
RT1B — w/ .172 Leads
Contact Type
S = STD Socket
P = STD Pin
Layout
9, 15, 21, 25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51)
B = No Hardware
S = (100)
Shell Finish
C2 = Cadmium, Yellow Chromate
N1 = Nickel, Electroless
Connector Series
(See page 9)
Notes:
1. For terminal identification see page 18.
2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54].
3. Lead lengths shown are for RT1.
4. Items in bold italic are qualified to MIL-DTL-83513.
16
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK Transition Blocks (Continued)
Microminiature D
Connectors
RT1 — Right-Angle
Termination Configuration
(Continued)
Part Number
MCK-**- *-
9PRT1
MCK-**- *-
9SRT1
MCK-**- *- 15PRT1
MCK-**- *- 15SRT1
MCK-**- *- 21PRT1
MCK-**- *- 21SRT1
MCK-**- *- 25PRT1
MCK-**- *- 25SRT1
MCK-**- *- 31PRT1
MCK-**- *- 31SRT1
MCK-**- *- 37PRT1
MCK-**- *- 37SRT1
MCK-**- *- 51PRT1
MCK-**- *- 51SRT1
MCK-**- *- 100PRT1
MCK-**- *- 100SRT1
A
Max.
.787
19.99
.787
19.99
.937
23.80
.937
23.80
1.087
27.61
1.087
27.61
1.187
30.15
1.187
30.15
1.337
33.96
1.337
33.96
1.487
37.77
1.487
37.77
1.435
36.45
1.435
36.45
2.175
55.25
2.175
55.25
B
± 005 [.127]
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.72
1.800
45.72
C
Max.
.3338
8.48
.4018
10.21
.4838
12.29
.5518
14.02
.6338
16.10
.7018
17.83
.7338
18.64
.8018
20.37
.8838
22.45
.9518
24.18
1.0338
26.26
1.1018
27.99
.9838
24.99
1.0518
26.72
1.3838
35.15
1.508
38.30
D
Max.
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.351
8.92
.351
8.92
.394
10.01
.394
10.01
E
Max.
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.525
13.34
.525
13.34
.525
13.34
.525
13.34
.660
16.76
.660
16.76
1.010
25.65
1.010
25.65
F
+.010 [.254]
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.300
7.62
.300
7.62
.400
10.16
.400
10.16
G
+.010 [.254]
.230
5.84
.230
5.84
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.150
3.81
.150
3.81
.200
5.08
.200
5.08
H
Max.
—
—
1
—
—
—
—
—
—
1.090
27.69
1.090
27.69
1.190
30.23
1.190
30.23
1.230
31.24
1.230
31.24
1.825
46.36
1.825
46.36
P = Pin, S = Socket
Note: Items in bold italic are qualified to MIL-DTL-83513.
17
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK Transition Blocks (Continued)
RT1 — Right-Angle
Termination Configuration
(Continued)
View is from mounting surface of
connector. Plug configuration shown.
For receptacle, use mirror image.
(Except 100 contacts)
.100
Typ.
[2.54]
CL
4
5
9
.050
Typ.
[1.27]
2
8
3
.100
Typ.
[2.54]
CL
1
7
8
15
6
14
9 Contacts
.100
Typ.
[2.54]
11 10
24
25
8
22
23
6
9
4
7
21 20
3
5
11
1
10
.020
[0.51]
9
16
21
.100
Typ.
[2.54]
.050
Typ.
[1.27]
11
16 14 12
.020
[0.51]
CL
18 16
14 12
37 35 33
7
5
10 8
31 29
28
32 30
3
6
26
27
28
3
4
24
17
18 16
2
22
15
25
2
21
1
3
8
5
7
27 29
9
31
28 30
52 54 56
32
76 78
80
79
82
81
62
64 66
63
86
83 85 87
.025
Ref.
[0.64]
17
19
65
42
44
68
67
35 33
20
.183
[4.65]
88 90
70
92
72
71 73
94
89 91 93
95
96
97
.100
Typ.
[2.54]
26
23
47
46 48
69
25
49
14
31
51 50
11
12
29
30
49
20
.020
[0.51]
17
18
27 8
10
9
46
28
48
6
4
7
5
3
43 41 25 23
45 42
47
26
.050
[1.27]
2
24
1
21 19
22 20
44 40 39 38
37
36
.108
[2.74]
1.800
Ref.
[45.72]
25
23
22
49
50
75
74
75
73
99
99
16 14
43
46 44
71 69
96
97
15
20 18
72 70
100 98
17
47 45
48
74
98 100
21 19
24
51
50
.050 Typ.
[1.27] Ref.
42 40
67
68
94
95
41
12
39
38
Socket #1 Ref.
9
10
8
6
3
4
2
36
32
30 28
62
34
59 57
60
58
88 86 84
85
82
83
55
.100
Ref.
[2.54]
1
29
63 61
91 89 87
5
33 31
65
90
7
37 35
66 64
92
93
13 11
.025
Ref.
[0.64]
(Receptacle Connector)
.275
Ref.
[6.99]
.100 Typ.
[2.54] Ref.
26
51
.100
Ref.
[2.54]
100 Contacts
(Socket Connector)
1
9
CL
24
21
45
.083
[2.11]
2
3
21
22
.275
Ref.
[6.99]
20 22
39 41 43
40
61
84
15
18
36 38
60
59
23
.050 Typ.
[1.27] Ref.
14 16
35 37
34
58
55 57
12
11 13
33
53
77
10
12
51 Contacts
.100 Typ.
[2.54] Ref.
6
4
5
1.216
Ref.
[30.89]
1.800
Ref.
[45.72]
4
6
26
13
37 Contacts
2
8
24 7
25
1
16 15 13
.100
Typ.
[2.54]
CL
.050
Typ.
[1.27]
1
1.266 Ref.
[32.16]
CL
9
10
30 29 27
34 32
36 34
18
31 Contacts
.020
[0.51]
9
19
2
14
1.116 Ref.
[28.35]
.100
Typ.
[2.54]
11
20
3
.158
[4.01]
CL
25 Contacts
19 17 15 13
5
17 4
21 Contacts
.966 Ref.
[24.54]
.050
Typ.
[1.27]
6
7
15 Contacts
1
14
8
9
.866 Ref.
[22.00]
15 13
15
18
11
10
2
3
2
17
19
13
.050
Typ.
[1.27]
.083
[2.11]
CL
12
4
12
.050
Typ.
[1.27]
.020
[0.51]
CL
.716 Ref.
[18.19]
.566 Ref.
[14.38]
13
5
7
.020
[0.51]
6
.083
[2.11]
.100
Typ.
[2.54]
.050
Typ.
[1.27]
.108
[2.74]
27
53
56 54
52
80 78
81 79
76
77
.100
Ref.
[2.54]
100 Contacts
(Pin Connector)
Pin #1 Ref.
(Plug Connector)
18
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK Transition Blocks (Continued)
Microminiature D
Connectors
ST1 — Straight
Termination Configuration
Contact #1
(Pin Connector)
Contact #1
(Socket Connector)
A
B
.096±.003 Dia. Typ.
[2.44±.076] (For Size 9 Thru 51)
.125±.003 Dia. Typ.
[3.18±.076] (For Size 100 Only)
F
MIL-DTL-83513/22 through /27
configurations. 180° — Lo Profile
termination configurations.
See page 35 for M83513 cross
references.
1
Optional Jackpost (2 Plcs.)
For 9 Thru 51: .086-56 UNC-2B
For 100: .112-40 UNC-2B
C
.190 Max. (Sizes 9-51)
[4.83]
D
.185 Max. (Size100 only)
[4.70]
.355
Max.
[9.02]
(Sizes 9-51)
E
.550
Max.
[13.97]
(Size100 only)
.165
Max. (Sizes 9-51) .303 Max. (Size 100 only)
[4.20]
[7.70]
.109 ±.015
[2.77 ±0.39]
(Lead Length For ST1 Shown)
.100
Typ.
[2.54]
.050
Typ.
[1.27]
Lead #1
(Socket Connector)
Lead #1
(Pin Connector)
How To Specify
MCK
C2
P
37
P
ST1
Straight Termination (Solder Dipped)
ST1 — w/ .109 Leads
ST1A — w/ .140 Leads
ST1B — w/ .172 Leads
Contact Type
S = STD Socket
P = STD Pin
Layout
9, 15, 21, 25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51)
B = No Hardware
S = (100)
Shell Finish
C2 = Cadmium, Yellow Chromate
N1 = Nickel, Electroless
Connector Series
(See page 9)
Notes:
1. For terminal identification see page 5048.
2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54].
3. Lead lengths shown are for ST1.
4. Items in bold italic are qualified to MIL-DTL-83513.
19
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK Transition Blocks (Continued)
ST1 — Straight Termination
Configuration (Continued)
Part Number
MCK-**- *-
9PST1
MCK-**- *-
9SST1
MCK-**- *- 15PST1
MCK-**- *- 15SST1
MCK-**- *- 21PST1
MCK-**- *- 21SST1
MCK-**- *- 25PST1
MCK-**- *- 25SST1
MCK-**- *- 31PST1
MCK-**- *- 31SST1
MCK-**- *- 37PST1
MCK-**- *- 37SST1
MCK-**- *- 51PST1
MCK-**- *- 51SST1
MCK-**- *- 100PST1
MCK-**- *- 100SST1
A
Max.
1.390
35.31
1.390
35.31
1.390
35.31
1.390
35.31
1.690
42.93
1.690
42.93
1.740
44.20
1.740
44.20
2.040
51.82
2.040
51.82
2.340
59.44
2.340
59.44
2.270
57.66
2.280
57.91
3.250
82.55
3.250
82.55
B
± .007 [.178]
1.150
29.21
1.150
29.21
1.150
29.21
1.150
29.21
1.450
36.83
1.450
36.83
1.500
38.10
1.500
38.10
1.800
45.72
1.800
45.72
2.100
53.34
2.100
53.34
2.000
50.80
2.000
50.80
2.800
71.12
2.800
71.12
C
± .005 [.127]
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.72
1.800
45.72
D
Max.
.885
22.48
.885
22.48
.945
24.00
.945
24.00
1.185
30.10
1.185
30.10
1.275
32.39
1.275
32.39
1.575
40.01
1.575
40.01
1.875
47.63
1.875
47.63
1.775
45.09
1.775
45.09
2.585
65.66
2.585
65.66
E
Max.
.3338
8.48
.4018
10.21
.4838
12.29
.5518
14.02
.6338
16.10
.7018
17.83
.7338
18.64
.8018
20.37
.8838
22.45
.9518
24.18
1.0338
26.26
1.1018
27.99
.9838
24.99
1.0518
26.72
1.3838
35.15
1.508
38.30
F
Max.
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.351
8.92
.351
8.92
.460
11.68
.460
11.68
P = Pin, S = Socket
Note: Items in bold italic are qualified to MIL-DTL-83513.
20
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK Transition Blocks (Continued)
Microminiature D
Connectors
ST1 — Straight Termination
Configuration (Continued)
View is from mounting surface of
connector. Plug configuration shown.
For receptacle, use mirror image.
.100
Typ.
[2.54]
.050
[1.27]
CL
6
9
1
.050
[1.27]
.050
Typ.
[1.27]
CL
17
5
31
1
.375
[9.53]
.150
[3.81]
9 Contacts
.050
[1.27]
CL
9
15
1
.100
Typ.
[2.54]
.050
Typ.
[1.27]
16
31 Contacts
.050
[1.27]
CL
20
37
1
8
1
.100
Typ.
[2.54]
.050
Typ.
[1.27]
.100
Typ.
[2.54]
.050
Typ.
[1.27]
19
.150
[3.81]
.225
[5.72]
37 Contacts
15 Contacts
.050
[1.27]
.100
Typ.
[2.54]
.050
Typ.
[1.27]
CL
12
21
1
.100
[2.54]
CL
36
51
19
.100
Typ.
[2.54]
.050
Typ.
[1.27]
35
1
18
11
.225
[5.72]
.150
[3.81]
21 Contacts
51 Contacts
.100
Typ.
[2.54]
.050
[1.27]
14
25
1
.050
[1.27]
.050
[1.27]
Typ.
CL
76
52
.100
Typ.
[2.54]
.050
Typ.
[1.27]
100
75
27
13
.150
[3.81]
CL
51
1
26
.150
[3.81]
100 Contacts
25 Contacts
Socket #1 Ref.
Pin #1 Ref.
(Receptacle Connector)
(Plug Connector)
21
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors
MCK with Cactus Bend
Termination
.308
Max.
[7.83]
A
Pin
2-56 UNC-2B Thd.
Opt. Jackpost
2 Plcs.
Contact #1
C
B
.190
Max.
[4.83]
n
n
n
n
n
Meets MIL-DTL-83513
Performance requirements
Single metal shell with no
Transition Block
Low profile and light weight
.100 [2.54] x .075 [1.91]
grid pattern
.182 ±.004
[4.62 ±0.10]
.400
Max.
[10.16]
.109
Min.
[2.76]
Pin
.160
Min.
[4.06]
2-56 Thd.
Studs. Opt.
.210 ±.02
[5.33 ±0.5]
#25 AWG, Copper, Hard,
Gold Plated, Solder Dipped
.225
Ref.
[5.72]
Design allows lower cost
construction
.075
Typ.
[1.91]
.100
Typ.
[2.54]
Metal Mounting
Surface
.050
Typ.
[1.27]
.308
Max.
[7.83]
.075
Typ.
[1.91]
.038
Typ.
[0.97]
.025
Typ.
[0.64]
A
Socket
2-56 UNC-2B Thd.
Opt. Jackpost
2 Plcs.
Contact #1
C
B
.190
Max.
[4.83]
.195 ±.003
[4.95 ±0.08]
.400
Max.
[10.16]
.109
Min.
[2.76]
Socket
.160
Min.
[4.06]
2-56 Thd.
Studs. Opt.
.210 ±.02
[5.33 ±0.5]
#25 AWG, Copper, Hard,
Gold Plated, Solder Dipped
.225
Ref.
[5.72]
.075
Typ.
[1.91]
.100
Typ.
[2.54]
Metal Mounting
Surface
.050
Typ.
[1.27]
.075
Typ.
[1.91]
.038
Typ.
[0.97]
.025
Typ.
[0.64]
22
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors (Continued)
MCK-**-*- 9 PST2
MCK-**-*- 9 SST2
MCK-**-*- 15 PST2
MCK-**-*- 15 SST2
MCK-**-*- 21 PST2
MCK-**-*- 21 SST2
MCK-**-*- 25 PST2
MCK-**-*- 25 SST2
MCK-**-*- 31 PST2
MCK-**-*- 31 SST2
MCK-**-*- 37 PST2
MCK-**-*- 37 SST2
How To Specify
MCK
C2
P
37
P
B ± .005
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
Microminiature D
Connectors
A
Max.
.785
19.94
.785
19.94
.935
23.75
.935
23.75
1.085
27.56
1.085
27.56
1.185
30.10
1.185
30.10
1.335
33.91
1.335
33.91
1.485
37.72
1.485
37.72
Part Number
C
Max.
.333
8.46
.402
10.21
.483
12.27
.552
14.02
.633
16.08
.702
17.83
.733
18.62
.802
20.37
.883
22.43
.952
24.18
1.033
26.24
1.102
27.99
1
ST2
Straight Termination
Contact Type
S = Standard Socket
P = Standard Pin
Layout
9, 15, 21, 25, 31, 37
Hardware
P = Jackpost (2-56 THD)
B = No Hardware
Shell Finish
C2 = Cadmium, Yellow Chromate
N1 = Nickel, Electroless
Connector Series
(See Page 9)
23
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors (Continued)
View is of mounting surface of pin connector
View is of mounting surface of socket connector
CL
CL
6
9
8
Size 9
7
1
3
.183
[4.65]
8
5
5
2
7
Size 9
9
4
Size 15
9
.183
[4.65]
2
CL
12
1
.183
[4.65]
14
14
11
13
15
4
6
8
2
3
5
Size 15
15
12
13
7
7
.183
[4.65]
Size 21
14
13
1
3
2
.183
[4.65]
18
17
5
4
Size 25
16
21
20
19
7
6
Size 21
21
9
8
19
20
11
11
10
22
17
19
21
3
5
7
9
2
4
18
9
10
.183
[4.65]
17
18
17
20
19
6
2
22
21
25
24
23
Size 25
25
11
8
8
4
1
6
3
10
26
25
8
5
7
13
14
5
6
12
3
1
4
2
23
24
13
13
12
21
12
17
15
20
18
16
9
7
5
3
11
.183
[4.65]
19
22
10
8
6
14
1
4
2
CL
24
23
15
16
7
CL
Size 31
2
CL
20
15
1
.183
[4.65]
18
1
4
CL
14
9
3
6
CL
16
15
10
11
5
8
CL
12
1
4
CL
10
6
3
28
27
10
9
30
29
12
11
30
Size 31
31
14
13
31
29
15
16
16
15
28
26
27
13
14
24
25
11
12
22
23
9
20
21
7
10
18
19
5
8
17
3
6
1
4
2
.183
[4.65]
.183
[4.65]
CL
CL
20
Size 37
22
24
26
28
21
23
25
27
3
5
7
9
1
2
4
6
8
30
29
11
10
32
31
34
33
13
12
35
15
14
37
36
16
Size 37
37
17
36
19
19
35
34
17
18
18
33
31
32
15
16
29
30
13
14
27
26
9
7
11
12
25
28
10
8
23
24
21
22
5
6
20
3
4
1
2
.183
[4.65]
.183
[4.65]
Pin #1 Ref.
Socket #1 Ref.
(Plug Connector)
(Receptacle Connector)
24
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCDM Series Metal Shell Connectors
Performance
Contact Resistance — The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard #24 solid copper leads
when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level;
150 VAC at 70,000 feet [21,336 m].
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m]
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) — No
discontinuity in excess of 1 microsecond
during twelve 20 minute sweeps from 10
to 2,000 CPS at .06 double amplitude or
20 G forces, whichever is less.
Corrosion Resistance (Per
MIL-STD-202C, Method 101B,
Condition B) — Both mated and
unmated samples do not exceed the
maximum allowable contact resistance
(8 milliohms) when subjected to the
48 hour salt spray test.
Durability — The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance —
Greater than 5,000 megohms at room
temperature for the materials listed
under “Materials”.
Maximum Current Carrying
Capacity — No. 24 contact, 3
amperes. It must be recognized,
however, that all the wires to a connector
will not carry their maximum current
under all environmental conditions due
to wire temperature.
Contact Engaging and Separation
Forces — 6 oz. [1.67N] maximum
(eng.); 0.5 oz. [.14N] minimum (sep.).
Temperature Range (Operating) —
Diallyl phthalate -67°F to 257°F
[-55°C to +125°C].
Microminiature D
Connectors
Technical & Performance
Data
Materials
Insulator — Diallyl phthalate per
MIL-M-14, Type SDG-F or Liquid
Crystal Polymer (LCP) per ASTM
D5138.
Contacts — Pin Contact: Copper alloy
and beryllium copper alloy make up the
complete construction. Socket Contact:
Copper alloy.
Body Shell — High grade aluminum
alloy.
1
Finishes
Contacts — Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Body Shell — Electroless nickel per
AMS 2404.
Note:
Insulators are molded into their metal
shells — No bonded joint is used.
Screw Mount
A
F
Contact #1
E
.193
[4.90]
.089–.094 Dia.
[2.26–2.39] 2 Plcs.
Pin
B
.093
[2.36]
The only metal shell connector that mates with all
existing plastic types. This
line is ideal for external use
and other applications
requiring frequent disconnect and remating. When
durability and reliability are
paramount the metal shell
connector is unsurpassed —
it eliminates the need for
retrofitting where new metal
shell varieties must mate
with older plastic types.
Originally designed for military applications, they are
currently used for commercial requirements, including
computers.
.379
[9.63]
Pin
Pin
D
C
A
F
Contact #1
E
.180
[4.57]
.089–.094
Dia.
[2.26–2.39]
Socket
B
.093
[2.36]
.365
[9.27]
Socket
Socket
.798
[20.27]
D
25
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCDM Series Metal Shell Connectors (Continued)
Screw Mount (Continued)
How To Specify
S — Solder pot for #26 max. stranded wire
X — Special, does not fit description below.
MCD- M1
B
37
P
6
A
1
18.0
Lead Length in Inches (min.)
Connector Series
Shell Type and Material
Insulation Color or Finish
M1 — Metal Shell
Screw Mount
Diallyl Phthalate or LCP Insulator
1 — All white wire
2 — All yellow wire
3 — All gray wire
Hardware (See Pages 14 and 15)
4 — Gold plated
5 — Tin dipped gold plated
6 — Bare (unfinished)
7 — Color coded per MIL-STD-681,
System 1
8 — Special color code
9 — 10 color repeating (solid) per M83513
Wire Type
B — No Hardware
F — Float Bushing
K — Jackscrew, Slotted Head, High Profile
L — Jackscrew, Slotted Head, Low Profile
Q — Jackscrew, Allen Head, High Profile
R — Jackscrew, Allen Head, Low Profile
X — Lockscrew, Slotted Head
Y — Lockscrew, Allen Head
P — Jackpost
*A — Type E, 7 strand
*B — Type ET, 7 strand
*C — Type E, 19 strand
*D — Type ET, 19 strand
F — 7 strand per MIL 22759/11
(#28 AWG only)
G — 19 strand per MIL-22759/11
#26 AWG, #24 AWG
L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Wire Size
4 — #24
5 — #25
6 — #26
8 — #28
0 — #30
Contact Type
P — Pin
S — Socket
Layout
9, 15, 21, 25, 30, 31, 37, 51
Part Number
MCDM1-9P***
MCDM1-9S***
MCDM1-15P***
MCDM1-15S***
MCDM1-21P***
MCDM1-21S***
MCDM1-25P***
MCDM1-25S***
MCDM1-30P***
MCDM1-30S***
MCDM1-31P***
MCDM1-31S***
MCDM1-37P***
MCDM1-37S***
MCDM1-51P***
MCDM1-51S***
A
± .005
[±.127]
.780
19.81
.780
19.81
.930
23.62
.930
23.62
1.080
27.43
1.080
27.43
1.180
29.97
1.180
29.97
.930
23.62
.930
23.62
1.330
33.78
1.330
33.78
1.480
37.59
1.480
37.59
1.430
36.32
1.430
36.32
B
± .005
[±.127]
.290
7.36
.365
9.27
.440
11.18
.515
13.08
.590
14.99
.665
16.89
.690
17.53
.765
19.43
.435
11.05
.515
13.08
.840
21.34
.915
23.24
.990
25.15
1.065
27.05
.940
23.88
1.015
25.78
C
± .010
[±.254]
.398
10.11
.398
10.11
.548
13.92
.548
13.92
.698
17.73
.698
17.73
.798
20.27
.798
20.27
.548
13.92
.548
13.92
.948
16.46
.948
16.46
1.098
27.89
1.098
27.89
1.048
26.62
1.048
26.62
D
± .010
[±.254]
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.252
6.40
.252
6.40
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.208
5.28
.208
5.28
E
± .005
[±.127]
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.295
7.49
.295
7.49
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.250
6.35
.250
6.35
F
± .005
[±.127]
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
.715
18.16
.715
18.16
1.115
28.32
1.115
28.32
1.270
32.26
1.270
32.26
1.215
30.86
1.215
30.86
Avg. Weight
lbs. ± 5%
[grams]
.003
1.36
.003
1.36
.004
1.81
.004
1.81
.005
2.26
.005
2.26
.006
2.72
.005
2.26
.007
3.17
.007
3.17
.007
3.17
.006
2.72
.007
3.17
.007
3.17
.009
4.08
.008
3.62
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
26
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors
Microminiature D
Connectors
Screw Mount Coaxial
Terminations
A
F
Available now — RF
Performance in standard
subminiature rectangular
connectors, with VSWR
values of 1.01 to 1.10 in
frequencies ranging in DC
to 2.3 GHz. This is the
COMBOMATE Connector.
Contact #1
Pin
E
.193
[4.90]
B
1
.093
[2.36]
This series of connectors
incorporates the same metal
shells and twist pin contacts
used in the widely accepted,
high reliability, MCDM Series.
The RF COMBOMATE
Connector Series will
accommodate RG 196 A/U
or RG 178 B/U coaxial cable
terminated in a unique
manner in standard, already
tooled insert layouts. This
feature results in savings in
cost, time and space.
The RF COMBOMATE
Connector Series will
accommodate a maximum
of 17 RG 196 A/U or
RG 178 B/U cables in an
area of less than .225 sq.
inches [14.51 mm2]. Mixed
layouts with coaxial terminations and standard AWG 24,
26 and 28 are also immediately available in 7 different
shell sizes. The overall
envelope and mounting
dimensions of equivalent
size of COMBOMATE
Connectors are exactly the
same as the standard
MCDM Series.
.089–.094 Dia.
[2.26–2.39] 2 Plcs.
.379
[9.63]
Pin
.250
Max.
[6.35]
C
Pin
Epoxy
D
A
F
Contact #1
E
.089–.094
Dia.
[2.26–2.39]
Socket
.180
[4.57]
B
.093
[2.36]
.365
[9.27]
Socket
Socket
Epoxy
.250
Max.
[6.35]
Performance Data —
Coaxial Terminations
Impedance — 49.0 to 51.0 Ohms.
Voltage Standing Wave Ratio
(VSWR) — 1.01:1 to 1.10:1 at
frequency ranging in DC to 2.3 GHz.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
750 VAC at sea level;
200 VAC at 70,000 feet [21,336 m].
D
(Actual Test Data)
1 to 2
30 MHz
60.0 db
100 MHz
49.1 db
175 MHz
42.6 db
38.0 db
500 MHz
31.6 db
1000 MHz
2000 MHz
22.4 db
3000 MHz
21.5 db
Crosstalk
(Between Adjacent Lines)
2 to 3
3 to 4
59.8 db
60.7 db
48.3 db
51.7 db
41.4 db
47.2 db
38.8 db
39.5 db
32.0 db
30.0 db
22.5 db
22.3 db
23.9 db
21.4 db
4 to 5
60.0 db
50.6 db
47.0 db
40.0 db
32.5 db
20.8 db
24.2 db
Sample
30 MHz
100 MHz
175 MHz
500 MHz
1000 MHz
2000 MHz
3000 MHz
Insertion Loss
#2
#3
.08 db
.08 db
.24 db
.25 db
.36 db
.36 db
.60 db
.50 db
1.33 db
1.36 db
1.71 db
1.42 db
2.45 db
2.74 db
#5
.08 db
.25 db
.32 db
.48 db
1.24 db
1.45 db
2.84 db
#1
.08 db
.24 db
.35 db
.58 db
1.25 db
1.48 db
2.66 db
#4
.08 db
.25 db
.34 db
.58 db
1.35 db
1.40 db
2.86 db
Note: Verification of all test data is on file at Tyco Electronics and is
available upon request.
All test runs using RG 196 A/U.
27
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
Screw Mount Coaxial
Terminations (Continued)
How To Specify
MCD
M3
7
P
3
18.0
Lead Length in Inches (min.)
Wire Size
3 — RG 196 A/U (White insulation)
2 — RG 178 B/U (Brown insulation)
X — Special, does not fit description*
Contact Type
P — Pin
S — Socket
Layout
3, 5, 7, 8, 10, 12, 17
Maximum RF combinations using RG 196 A/U and RG 178 B/U cable
Shell Type and Material
M3 — Metal Shell
Screw Mount
Diallyl Phthalate or LCP Insulator
Connector Series
*Ordering Criteria: A wide variety of contact combinations, coaxial and power mixed, are available.
Contact Tyco Electronics for additional arrangement numbers.
Part Number
MCDM3-3P**
MCDM3-3S**
MCDM3-5P**
MCDM3-5S**
MCDM3-7P**
MCDM3-7S**
MCDM3-8P**
MCDM3-8S**
MCDM3-10P**
MCDM3-10S**
MCDM3-12P**
MCDM3-12S**
MCDM3-17P**
MCDM3-17S**
A
± .005
[± .127]
.780
19.81
.780
19.81
.930
23.62
.930
23.62
1.080
27.43
1.080
27.43
1.180
29.97
1.180
29.97
1.330
33.78
1.330
33.78
1.480
37.59
1.480
37.59
1.430
36.32
1.430
36.32
B
± .005
[± .127]
.290
7.36
.365
9.27
.440
11.18
.515
13.08
.590
14.99
.665
16.89
.690
17.53
.765
19.43
.840
21.34
.915
23.24
.990
25.15
1.065
27.05
.940
23.88
1.015
25.78
C
Max.
D
Max.
.408
10.36
.408
10.36
.558
14.17
.558
14.17
.708
17.98
.708
17.98
.808
20.52
.808
20.52
.958
24.33
.958
24.33
1.108
27.89
1.108
27.89
1.058
26.87
1.058
26.87
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.245
6.22
.245
6.22
E
± .005
[± .127]
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.250
6.35
.250
6.35
F
± .005
[± .127]
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.270
32.26
1.270
32.26
1.215
30.86
1.215
30.86
28
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
1
5
6
1
9
8
9
3
RG196 A/U or
RG 178 B/U
1
15
11
12
21
7
RG196 A/U or
RG 178 B/U
5
RG196 A/U or
RG 178 B/U
1
13
14
Microminiature D
Connectors
Contact Arrangement as
Viewed from the Engaging
Face of the Pin Side
1
25
16
17
1
31
10
RG196 A/U or
RG 178 B/U
8
RG196 A/U or
RG 178 B/U
1
19
Center Conductor
20
37
12
RG196 A/U or
RG 178 B/U
1
Shield
18
Termination Pattern
35
19
36
51
17
RG196 A/U or
RG 178 B/U
Note: The above contact arrangements are the maximum densities that can be obtained in each shell size when using
RG 196 A/U or RG 178 B/U cable.
29
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MCDM Series Metal Shell Connectors Panel Mounting — Cutout Dimensions
Panel Mounting
Dimensions — MCDM
.395 ± .005
[10.03 ± 0.13]
.200 ± .005
[5.08 ± 0.13]
Plug
Plugand
and Receptacle
Receptacle
Front
Front Mounted
Mounted
Plug
Plugand
and Receptacle
Receptacle
Rear
Rear Mounted
Mounted
.300 ± .005
[7.62 ± 0.13]
PlugFront
Front Mounted
Mounted
Plug
Receptacle Rear
Rear Mounted
Receptacle
Mounted
Panel Cutout Dimensions
Screw Mounting
Number
of
Contacts
+ .005
.089 – .000
+ 0.13
[2.26 – 0.00 ]
C
9
15
B
21
A
Full
Radius
(Typ.)
Front
R .015
[.381]
Max. Typ.
25
Figure 1
31
37
C
.089
[2.26]
A
51
B
Fig.
1
2
1
2
1
2
1
2
1
2
1
2
1
2
A
+ .004 [+ .102]
– .000 [– .000]
.412 [10.46]
.384 [9.75]
.562 [14.27]
.534 [13.56]
.712 [18.08]
.684 [17.37]
.812 [20.62]
.784 [19.91]
.962 [24.43]
.934 [23.72]
1.112 [28.24]
1.084 [27.53]
1.062 [26.97]
1.034 [26.26]
B
+ .004 [+ .102]
– .000 [– .000]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.224 [5.69]
.264 [6.71]
C
+ .005 [+ .127]
– .000 [– .000]
.570 [14.48]
.570 [14.48]
.720 [18.29]
.720 [18.29]
.870 [22.10]
.870 [22.10]
.970 [24.64]
.970 [24.64]
1.120 [28.45]
1.120 [28.45]
1.270 [32.26]
1.270 [32.26]
1.220 [30.99]
1.220 [30.99]
+ .005
Full
Radius
(Typ.)
R
.075 – .000
+ 0.13
[1.90 – 0.00 ]
116/117
Rear
Figure 2
Note: Front mounting preferred.
30
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MIL-DTL-83513 Cross Reference
Microminiature D
Connectors
MCK (Metal Shell)
Military Part No.
M83513/01-A*
M83513/01-B*
M83513/01-C*
M83513/01-D*
M83513/01-E*
M83513/01-F*
M83513/01-G*
M83513/01-H*
M83513/02-A*
M83513/02-B*
M83513/02-C*
M83513/02-D*
M83513/02-E*
M83513/02-F*
M83513/02-G*
M83513/02-H*
M83513/03-A01*
M83513/03-B01*
M83513/03-C01*
M83513/03-D01*
M83513/03-E01*
M83513/03-F01*
M83513/03-G01*
M83513/03-H01*
M83513/03-A02*
M83513/03-B02*
M83513/03-C02*
M83513/03-D02*
M83513/03-E02*
M83513/03-F02*
M83513/03-G02*
M83513/03-H02*
M83513/03-A03*
M83513/03-B03*
M83513/03-C03*
M83513/03-D03*
M83513/03-E03*
M83513/03-F03*
M83513/03-G03*
M83513/03-H03*
M83513/03-A04*
M83513/03-B04*
M83513/03-C04*
M83513/03-D04*
M83513/03-E04*
M83513/03-F04*
M83513/03-G04*
M83513/03-H04*
M83513/03-A05*
M83513/03-B05*
M83513/03-C05*
M83513/03-D05*
M83513/03-E05*
M83513/03-F05*
M83513/03-G05*
M83513/03-H05*
M83513/03-A06*
M83513/03-B06*
M83513/03-C06*
M83513/03-D06*
MICRODOT Part No.
MCK-**-B- 9PS
MCK-**-B- 15PS
MCK-**-B- 21PS
MCK-**-B- 25PS
MCK-**-B- 31PS
MCK-**-B- 37PS
MCK-**-B- 51PS
MCK-**-B-100PS
MCK-**-B- 9SS
MCK-**-B- 15SS
MCK-**-B- 21SS
MCK-**-B- 25SS
MCK-**-B- 31SS
MCK-**-B- 37SS
MCK-**-B- 51SS
MCK-**-B-100SS
MCK-**-B- 9P6G1-18.0
MCK-**-B- 15P6G1-18.0
MCK-**-B- 21P6G1-18.0
MCK-**-B- 25P6G1-18.0
MCK-**-B- 31P6G1-18.0
MCK-**-B- 37P6G1-18.0
MCK-**-B- 51P6G1-18.0
MCK-**-B-100P6G1-18.0
MCK-**-B- 9P6G1-36.0
MCK-**-B- 15P6G1-36.0
MCK-**-B- 21P6G1-36.0
MCK-**-B- 25P6G1-36.0
MCK-**-B- 31P6G1-36.0
MCK-**-B- 37P6G1-36.0
MCK-**-B- 51P6G1-36.0
MCK-**-B-100P6G1-36.0
MCK-**-B- 9P6G9-18.0
MCK-**-B- 15P6G9-18.0
MCK-**-B- 21P6G9-18.0
MCK-**-B- 25P6G9-18.0
MCK-**-B- 31P6G9-18.0
MCK-**-B- 37P6G9-18.0
MCK-**-B- 51P6G9-18.0
MCK-**-B-100P6G9-18.0
MCK-**-B- 9P6G9-36.0
MCK-**-B- 15P6G9-36.0
MCK-**-B- 21P6G9-36.0
MCK-**-B- 25P6G9-36.0
MCK-**-B- 31P6G9-36.0
MCK-**-B- 37P6G9-36.0
MCK-**-B- 51P6G9-36.0
MCK-**-B-100P6G9-36.0
MCK-**-B- 9P5L4-0.5
MCK-**-B- 15P5L4-0.5
MCK-**-B- 21P5L4-0.5
MCK-**-B- 25P5L4-0.5
MCK-**-B- 31P5L4-0.5
MCK-**-B- 37P5L4-0.5
MCK-**-B- 51P5L4-0.5
MCK-**-B-100P5L4-0.5
MCK-**-B- 9P5L4-1.0
MCK-**-B- 15P5L4-1.0
MCK-**-B- 21P5L4-1.0
MCK-**-B- 25P5L4-1.0
Military Part No.
M83513/03-E06*
M83513/03-F06*
M83513/03-G06*
M83513/03-H06*
M83513/03-A07*
M83513/03-B07*
M83513/03-C07*
M83513/03-D07*
M83513/03-E07*
M83513/03-F07*
M83513/03-G07*
M83513/03-H07*
M83513/03-A08*
M83513/03-B08*
M83513/03-C08*
M83513/03-D08*
M83513/03-E08*
M83513/03-F08*
M83513/03-G08*
M83513/03-H08*
M83513/03-A09*
M83513/03-B09*
M83513/03-C09*
M83513/03-D09*
M83513/03-E09*
M83513/03-F09*
M83513/03-G09*
M83513/03-H09*
M83513/03-A10*
M83513/03-B10*
M83513/03-C10*
M83513/03-D10*
M83513/03-E10*
M83513/03-F10*
M83513/03-G10*
M83513/03-H10*
M83513/03-A11*
M83513/03-B11*
M83513/03-C11*
M83513/03-D11*
M83513/03-E11*
M83513/03-F11*
M83513/03-G11*
M83513/03-H11*
M83513/03-A12*
M83513/03-B12*
M83513/03-C12*
M83513/03-D12*
M83513/03-E12*
M83513/03-F12*
M83513/03-G12*
M83513/03-H12*
M83513/03-A13*
M83513/03-B13*
M83513/03-C13*
M83513/03-D13*
M83513/03-E13*
M83513/03-F13*
M83513/03-G13*
M83513/03-H13*
MICRODOT Part No.
MCK-**-B- 31P5L4-1.0
MCK-**-B- 37P5L4-1.0
MCK-**-B- 51P5L4-1.0
MCK-**-B-100P5L4-1.0
MCK-**-B- 9P5L5-0.5
MCK-**-B- 15P5L5-0.5
MCK-**-B- 21P5L5-0.5
MCK-**-B- 25P5L5-0.5
MCK-**-B- 31P5L5-0.5
MCK-**-B- 37P5L5-0.5
MCK-**-B- 51P5L5-0.5
MCK-**-B-100P5L5-0.5
MCK-**-B- 9P5L5-1.0
MCK-**-B- 15P5L5-1.0
MCK-**-B- 21P5L5-1.0
MCK-**-B- 25P5L5-1.0
MCK-**-B- 31P5L5-1.0
MCK-**-B- 37P5L5-1.0
MCK-**-B- 51P5L5-1.0
MCK-**-B-100P5L5-1.0
MCK-**-B- 9P6Q1-18.0
MCK-**-B- 15P6Q1-18.0
MCK-**-B- 21P6Q1-18.0
MCK-**-B- 25P6Q1-18.0
MCK-**-B- 31P6Q1-18.0
MCK-**-B- 37P6Q1-18.0
MCK-**-B- 51P6Q1-18.0
MCK-**-B-100P6Q1-18.0
MCK-**-B- 9P6Q1-36.0
MCK-**-B- 15P6Q1-36.0
MCK-**-B- 21P6Q1-36.0
MCK-**-B- 25P6Q1-36.0
MCK-**-B- 31P6Q1-36.0
MCK-**-B- 37P6Q1-36.0
MCK-**-B- 51P6Q1-36.0
MCK-**-B-100P6Q1-36.0
MCK-**-B- 9P6Q9-18.0
MCK-**-B- 15P6Q9-18.0
MCK-**-B- 21P6Q9-18.0
MCK-**-B- 25P6Q9-18.0
MCK-**-B- 31P6Q9-18.0
MCK-**-B- 37P6Q9-18.0
MCK-**-B- 51P6Q9-18.0
MCK-**-B-100P6Q9-18.0
MCK-**-B- 9P6Q9-36.0
MCK-**-B- 15P6Q9-36.0
MCK-**-B- 21P6Q9-36.0
MCK-**-B- 25P6Q9-36.0
MCK-**-B- 31P6Q9-36.0
MCK-**-B- 37P6Q9-36.0
MCK-**-B- 51P6Q9-36.0
MCK-**-B-100P6Q9-36.0
MCK-**-B- 9P6G1-72.0
MCK-**-B- 1 5P6G1-72.0
MCK-**-B- 21P6G1-72.0
MCK-**-B- 25P6G1-72.0
MCK-**-B- 31P6G1-72.0
MCK-**-B- 37P6G1-72.0
MCK-**-B- 51P6G1-72.0
MCK-**-B-100P6G1-72.0
Military Part No.
M83513/03-A14*
M83513/03-B14*
M83513/03-C14*
M83513/03-D14*
M83513/03-E14*
M83513/03-F14*
M83513/03-G14*
M83513/03-H14*
M83513/03-A15*
M83513/03-B15*
M83513/03-C15*
M83513/03-D15*
M83513/03-E15*
M83513/03-F15*
M83513/03-G15*
M83513/03-H15*
M83513/03-A16*
M83513/03-B16*
M83513/03-C16*
M83513/03-D16*
M83513/03-E16*
M83513/03-F16*
M83513/03-G16*
M83513/03-H16*
M83513/04-A01*
M83513/04-B01*
M83513/04-C01*
M83513/04-D01*
M83513/04-E01*
M83513/04-F01*
M83513/04-G01*
M83513/04-H01*
M83513/04-A02*
M83513/04-B02*
M83513/04-C02*
M83513/04-D02*
M83513/04-E02*
M83513/04-F02*
M83513/04-G02*
M83513/04-H02*
M83513/04-A03*
M83513/04-B03*
M83513/04-C03*
M83513/04-D03*
M83513/04-E03*
M83513/04-F03*
M83513/04-G03*
M83513/04-H03*
M83513/04-A04*
M83513/04-B04*
M83513/04-C04*
M83513/04-D04*
M83513/04-E04*
M83513/04-F04*
M83513/04-G04*
M83513/04-H04*
M83513/04-A05*
M83513/04-B05*
M83513/04-C05*
M83513/04-D05*
MICRODOT Part No.
MCK-**-B- 9P6G9-72.0
MCK-**-B- 15P6G9-72.0
MCK-**-B- 21P6G9-72.0
MCK-**-B- 25P6G9-72.0
MCK-**-B- 31P6G9-72.0
MCK-**-B- 37P6G9-72.0
MCK-**-B- 51P6G9-72.0
MCK-**-B-100P6G9-72.0
MCK-**-B- 9P6Q1-72.0
MCK-**-B- 15P6Q1-72.0
MCK-**-B- 21P6Q1-72.0
MCK-**-B- 25P6Q1-72.0
MCK-**-B- 31P6Q1-72.0
MCK-**-B- 37P6Q1-72.0
MCK-**-B- 51P6Q1-72.0
MCK-**-B-100P6Q1-72.0
MCK-**-B- 9P6Q9-72.0
MCK-**-B- 15P6Q9-72.0
MCK-**-B- 21P6Q9-72.0
MCK-**-B- 25P6Q9-72.0
MCK-**-B- 31P6Q9-72.0
MCK-**-B- 37P6Q9-72.0
MCK-**-B- 51P6Q9-72.0
MCK-**-B-100P6Q9-72.0
MCK-**-B- 9S6G1-18.0
MCK-**-B- 15S6G1-18.0
MCK-**-B- 21S6G1-18.0
MCK-**-B- 25S6G1-18.0
MCK-**-B- 31S6G1-18.0
MCK-**-B- 37S6G1-18.0
MCK-**-B- 51S6G1-18.0
MCK-**-B-100S6G1-18.0
MCK-**-B- 9S6G1-36.0
MCK-**-B- 15S6G1-36.0
MCK-**-B- 21S6G1-36.0
MCK-**-B- 25S6G1-36.0
MCK-**-B- 31S6G1-36.0
MCK-**-B- 37S6G1-36.0
MCK-**-B- 51S6G1-36.0
MCK-**-B-100S6G1-36.0
MCK-**-B- 9S6G9-18.0
MCK-**-B- 15S6G9-18.0
MCK-**-B- 21S6G9-18.0
MCK-**-B- 25S6G9-18.0
MCK-**-B- 31S6G9-18.0
MCK-**-B- 37S6G9-18.0
MCK-**-B- 51S6G9-18.0
MCK-**-B-100S6G9-18.0
MCK-**-B- 9S6G9-36.0
MCK-**-B- 15S6G9-36.0
MCK-**-B- 21S6G9-36.0
MCK-**-B- 25S6G9-36.0
MCK-**-B- 31S6G9-36.0
MCK-**-B- 37S6G9-36.0
MCK-**-B- 51S6G9-36.0
MCK-**-B-100S6G9-36.0
MCK-**-B- 9S5L4-0.5
MCK-**-B- 15S5L4-0.5
MCK-**-B- 21S5L4-0.5
MCK-**-B- 25S5L4-0.5
1
31
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
MCK (Metal Shell) (Continued)
Military Part No.
M83513/04-E05*
M83513/04-F05*
M83513/04-G05*
M83513/04-H05*
M83513/04-A06*
M83513/04-B06*
M83513/04-C06*
M83513/04-D06*
M83513/04-E06*
M83513/04-F06*
M83513/04-G06*
M83513/04-H06*
M83513/04-A07*
M83513/04-B07*
M83513/04-C07*
M83513/04-D07*
M83513/04-E07*
M83513/04-F07*
M83513/04-G07*
M83513/04-H07*
M83513/04-A08*
M83513/04-B08*
M83513/04-C08*
M83513/04-D08*
M83513/04-E08*
M83513/04-F08*
M83513/04-G08*
M83513/04-H08*
M83513/04-A09*
M83513/04-B09*
M83513/04-C09*
MICRODOT Part No.
MCK-**-B- 31S5L4-0.5
MCK-**-B- 37S5L4-0.5
MCK-**-B- 51S5L4-0.5
MCK-**-B-100S5L4-0.5
MCK-**-B- 9S5L4-1.0
MCK-**-B- 15S5L4-1.0
MCK-**-B- 21S5L4-1.0
MCK-**-B- 25S5L4-1.0
MCK-**-B- 31S5L4-1.0
MCK-**-B- 37S5L4-1.0
MCK-**-B- 51S5L4-1.0
MCK-**-B-100S5L4-1.0
MCK-**-B- 9S5L5-0.5
MCK-**-B- 15S5L5-0.5
MCK-**-B- 21S5L5-0.5
MCK-**-B- 25S5L5-0.5
MCK-**-B- 31S5L5-0.5
MCK-**-B- 37S5L5-0.5
MCK-**-B- 51S5L5-0.5
MCK-**-B-100S5L5-0.5
MCK-**-B- 9S5L5-1.0
MCK-**-B- 15S5L5-1.0
MCK-**-B- 21S5L5-1.0
MCK-**-B- 25S5L5-1.0
MCK-**-B- 31S5L5-1.0
MCK-**-B- 37S5L5-1.0
MCK-**-B- 51S5L5-1.0
MCK-**-B-100S5L5-1.0
MCK-**-B- 9S6Q1-18.0
MCK-**-B- 15S6Q1-18.0
MCK-**-B- 21S6Q1-18.0
Military Part No.
M83513/04-D09*
M83513/04-E09*
M83513/04-F09*
M83513/04-G09*
M83513/04-H09*
M83513/04-A10*
M83513/04-B10*
M83513/04-C10*
M83513/04-D10*
M83513/04-E10*
M83513/04-F10*
M83513/04-G10*
M83513/04-H10*
M83513/04-A11*
M83513/04-B11*
M83513/04-C11*
M83513/04-D11*
M83513/04-E11*
M83513/04-F11*
M83513/04-G11*
M83513/04-H11*
M83513/04-A12*
M83513/04-B12*
M83513/04-C12*
M83513/04-D12*
M83513/04-E12*
M83513/04-F12*
M83513/04-G12*
M83513/04-H12*
M83513/04-A13*
M83513/04-B13*
MICRODOT Part No.
MCK-**-B- 25S6Q1-18.0
MCK-**-B- 31S6Q1-18.0
MCK-**-B- 37S6Q1-18.0
MCK-**-B- 51S6Q1-18.0
MCK-**-B-100S6Q1-18.0
MCK-**-B- 9S6Q1-36.0
MCK-**-B- 15S6Q1-36.0
MCK-**-B- 21S6Q1-36.0
MCK-**-B- 25S6Q1-36.0
MCK-**-B- 31S6Q1-36.0
MCK-**-B- 37S6Q1-36.0
MCK-**-B- 51S6Q1-36.0
MCK-**-B-100S6Q1-36.0
MCK-**-B- 9S6Q9-18.0
MCK-**-B- 15S6Q9-18.0
MCK-**-B- 21S6Q9-18.0
MCK-**-B- 25S6Q9-18.0
MCK-**-B- 31S6Q9-18.0
MCK-**-B- 37S6Q9-18.0
MCK-**-B- 51S6Q9-18.0
MCK-**-B-100S6Q9-18.0
MCK-**-B- 9S6Q9-36.0
MCK-**-B- 15S6Q9-36.0
MCK-**-B- 21S6Q9-36.0
MCK-**-B- 25S6Q9-36.0
MCK-**-B- 31S6Q9-36.0
MCK-**-B- 37S6Q9-36.0
MCK-**-B- 51S6Q9-36.0
MCK-**-B-100S6Q9-36.0
MCK-**-B- 9S6G1-72.0
MCK-**-B- 15S6G1-72.0
Military Part No.
M83513/04-C13*
M83513/04-D13*
M83513/04-E13*
M83513/04-F13*
M83513/04-G13*
M83513/04-H13*
M83513/04-A14*
M83513/04-B14*
M83513/04-C14*
M83513/04-D14*
M83513/04-E14*
M83513/04-F14*
M83513/04-G14*
M83513/04-H14*
M83513/04-A15*
M83513/04-B15*
M83513/04-C15*
M83513/04-D15*
M83513/04-E15*
M83513/04-F15*
M83513/04-G15*
M83513/04-H15*
M83513/04-A16*
M83513/04-B16*
M83513/04-C16*
M83513/04-D16*
M83513/04-E16*
M83513/04-F16*
M83513/04-G16*
M83513/04-H16*
MICRODOT Part No.
MCK-**-B- 21S6G1-72.0
MCK-**-B- 25S6G1-72.0
MCK-**-B- 31S6G1-72.0
MCK-**-B- 37S6G1-72.0
MCK-**-B- 51S6G1-72.0
MCK-**-B-100S6G1-72.0
MCK-**-B- 9S6G9-72.0
MCK-**-B- 15S6G9-72.0
MCK-**-B- 21S6G9-72.0
MCK-**-B- 25S6G9-72.0
MCK-**-B- 31S6G9-72.0
MCK-**-B- 37S6G9-72.0
MCK-**-B- 51S6G9-72.0
MCK-**-B-100S6G9-72.0
MCK-**-B- 9S6Q1-72.0
MCK-**-B- 15S6Q1-72.0
MCK-**-B- 21S6Q1-72.0
MCK-**-B- 25S6Q1-72.0
MCK-**-B- 31S6Q1-72.0
MCK-**-B- 37S6Q1-72.0
MCK-**-B- 51S6Q1-72.0
MCK-**-B-100S6Q1-72.0
MCK-**-B- 9S6Q9-72.0
MCK-**-B- 15S6Q9-72.0
MCK-**-B- 21S6Q9-72.0
MCK-**-B- 25S6Q9-72.0
MCK-**-B- 31S6Q9-72.0
MCK-**-B- 37S6Q9-72.0
MCK-**-B- 51S6Q9-72.0
MCK-**-B-100S6Q9-72.0
MICRODOT Part No.
“JACKPOST ASSY #2”
“JACKPOST ASSY, #4”
*C = Cadmium or N = Nickel (space applications only)
**C2 = Cadmium or N1 = Nickel (space applications only)
Hardware
MICRODOT Part No.
“A. HD, J/S, L.F, #2”
“A. HD, J/S, L.F, #4”
“A. HD, J/S,H.F, #2”
“A. HD, J/S, H.F. #4”
Military Part No.
M83513/05-02
M83513/05-12
M83513/05-03
M83513/05-13
Military Part No.
M83513/05-05
M83513/05-15
M83513/05-06
M83513/05-16
MICRODOT Part No.
“S. HD, J/S, L.F, #2”
“S. HD, J/S, L.F, #4”
“S. HD, J/S, H.F, #2”
“S. HD, J/S, H.F, #4”
Military Part No.
M83513/05-07
M83513/05-17
Military Part No.
M83513/07-G
M83513/08-A01
M83513/08-B01
M83513/08-C01
M83513/08-D01
M83513/08-E01
M83513/08-F01
M83513/08-G01
M83513/08-A02
M83513/08-B02
M83513/08-C02
M83513/08-D02
M83513/08-E02
MICRODOT Part No.
MCDR3-B-51SS
MCDR3-B- 9P6G1-18.0
MCDR3-B-15P6G1-18.0
MCDR3-B-21P6G1-18.0
MCDR3-B-25P6G1-18.0
MCDR3-B-31P6G1-18.0
MCDR3-B-37P6G1-18.0
MCDR3-B-51P6G1-18.0
MCDR3-B- 9P6G1-36.0
MCDR3-B-15P6G1-36.0
MCDR3-B-21P6G1-36.0
MCDR3-B-25P6G1-36.0
MCDR3-B-31P6G1-36.0
Military Part No.
M83513/08-F02
M83513/08-G02
M83513/08-A03
M83513/08-B03
M83513/08-C03
M83513/08-D03
M83513/08-E03
M83513/08-F03
M83513/08-G03
M83513/08-A04
M83513/08-B04
M83513/08-C04
M83513/08-D04
MCDR (Plastic Shell)
Military Part No.
M83513/06-A
M83513/06-B
M83513/06-C
M83513/06-D
M83513/06-E
M83513/06-F
M83513/06-G
M83513/07-A
M83513/07-B
M83513/07-C
M83513/07-D
M83513/07-E
M83513/07-F
MICRODOT Part No.
MCDR3-B- 9PS
MCDR3-B-15PS
MCDR3-B-21PS
MCDR3-B-25PS
MCDR3-B-31PS
MCDR3-B-37PS
MCDR3-B-51PS
MCDR3-B- 9SS
MCDR3-B-15SS
MCDR3-B-21SS
MCDR3-B-25SS
MCDR3-B-31SS
MCDR3-B-37SS
MICRODOT Part No.
MCDR3-B-37P6G1-36.0
MCDR3-B-51P6G1-36.0
MCDR3-B- 9P6G9-18.0
MCDR3-B-15P6G9-18.0
MCDR3-B-21P6G9-18.0
MCDR3-B-25P6G9-18.0
MCDR3-B-31P6G9-18.0
MCDR3-B-37P6G9-18.0
MCDR3-B-51P6G9-18.0
MCDR3-B- 9P6G9-36.0
MCDR3-B-15P6G9-36.0
MCDR3-B-21P6G9-36.0
MCDR3-B-25P6G9-36.0
32
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
Microminiature D
Connectors
MCDR (Plastic Shell) (Continued)
Military Part No.
M83513/08-E04
M83513/08-F04
M83513/08-G04
M83513/08-A05
M83513/08-B05
M83513/08-C05
M83513/08-D05
M83513/08-E05
M83513/08-F05
M83513/08-G05
M83513/08-A06
M83513/08-B06
M83513/08-C06
M83513/08-D06
M83513/08-E06
M83513/08-F06
M83513/08-G06
M83513/08-A07
M83513/08-B07
M83513/08-C07
M83513/08-D07
M83513/08-E07
M83513/08-F07
M83513/08-G07
M83513/08-A08
M83513/08-B08
M83513/08-C08
M83513/08-D08
M83513/08-E08
M83513/08-F08
M83513/08-G08
M83513/08-A09
M83513/08-B09
M83513/08-C09
M83513/08-D09
M83513/08-E09
M83513/08-F09
M83513/08-G09
M83513/08-A10
M83513/08-B10
M83513/08-C10
M83513/08-D10
M83513/08-E10
M83513/08-F10
M83513/08-G10
M83513/08-A11
M83513/08-B11
M83513/08-C11
M83513/08-D11
M83513/08-E11
M83513/08-F11
M83513/08-G11
M83513/08-A12
M83513/08-B12
M83513/08-C12
M83513/08-D12
M83513/08-E12
M83513/08-F12
M83513/08-G12
M83513/08-A13
MICRODOT Part No.
MCDR3-B-31P6G9-36.0
MCDR3-B-37P6G9-36.0
MCDR3-B-51P6G9-36.0
MCDR3-B- 9P5L4-0.5
MCDR3-B-15P5L4-0.5
MCDR3-B-21P5L4-0.5
MCDR3-B-25P5L4-0.5
MCDR3-B-31P5L4-0.5
MCDR3-B-37P5L4-0.5
MCDR3-B-51P5L4-0.5
MCDR3-B- 9P5L4-1.0
MCDR3-B-15P5L4-1.0
MCDR3-B-21P5L4-1.0
MCDR3-B-25P5L4-1.0
MCDR3-B-31P5L4-1.0
MCDR3-B-37P5L4-1.0
MCDR3-B-51P5L4-1.0
MCDR3-B- 9P5L5-0.5
MCDR3-B-15P5L5-0.5
MCDR3-B-21P5L5-0.5
MCDR3-B-25P5L5-0.5
MCDR3-B-31P5L5-0.5
MCDR3-B-37P5L5-0.5
MCDR3-B-51P5L5-0.5
MCDR3-B- 9P5L5-1.0
MCDR3-B-15P5L5-1.0
MCDR3-B-21P5L5-1.0
MCDR3-B-25P5L5-1.0
MCDR3-B-31P5L5-1.0
MCDR3-B-37P5L5-1.0
MCDR3-B-51P5L5-1.0
MCDR3-B- 9P6Q1-18.0
MCDR3-B-15P6Q1-18.0
MCDR3-B-21P6Q1-18.0
MCDR3-B-25P6Q1-18.0
MCDR3-B-31P6Q1-18.0
MCDR3-B-37P6Q1-18.0
MCDR3-B-51P6Q1-18.0
MCDR3-B- 9P6Q1-36.0
MCDR3-B-15P6Q1-36.0
MCDR3-B-21P6Q1-36.0
MCDR3-B-25P6Q1-36.0
MCDR3-B-31P6Q1-36.0
MCDR3-B-37P6Q1-36.0
MCDR3-B-51P6Q1-36.0
MCDR3-B- 9P6Q9-18.0
MCDR3-B-15P6Q9-18.0
MCDR3-B-21P6Q9-18.0
MCDR3-B-25P6Q9-18.0
MCDR3-B-31P6Q9-18.0
MCDR3-B-37P6Q9-18.0
MCDR3-B-51P6Q9-18.0
MCDR3-B- 9P6Q9-36.0
MCDR3-B-15P6Q9-36.0
MCDR3-B-21P6Q9-36.0
MCDR3-B-25P6Q9-36.0
MCDR3-B-31P6Q9-36.0
MCDR3-B-37P6Q9-36.0
MCDR3-B-51P6Q9-36.0
MCDR3-B- 9P6G1-72.0
Military Part No.
M83513/08-B13
M83513/08-C13
M83513/08-D13
M83513/08-E13
M83513/08-F13
M83513/08-G13
M83513/08-A14
M83513/08-B14
M83513/08-C14
M83513/08-D14
M83513/08-E14
M83513/08-F14
M83513/08-G14
M83513/08-A15
M83513/08-B15
M83513/08-C15
M83513/08-D15
M83513/08-E15
M83513/08-F15
M83513/08-G15
M83513/08-A16
M83513/08-B16
M83513/08-C16
M83513/08-D16
M83513/08-E16
M83513/08-F16
M83513/08-G16
M83513/09-A01
M83513/09-B01
M83513/09-C01
M83513/09-D01
M83513/09-E01
M83513/09-F01
M83513/09-G01
M83513/09-A02
M83513/09-B02
M83513/09-C02
M83513/09-D02
M83513/09-E02
M83513/09-F02
M83513/09-G02
M83513/09-A03
M83513/09-B03
M83513/09-C03
M83513/09-D03
M83513/09-E03
M83513/09-F03
M83513/09-G03
M83513/09-A04
M83513/09-B04
M83513/09-C04
M83513/09-D04
M83513/09-E04
M83513/09-F04
M83513/09-G04
M83513/09-A05
M83513/09-B05
M83513/09-C05
M83513/09-D05
M83513/09-E05
MICRODOT Part No.
MCDR3-B-15P6G1-72.0
MCDR3-B-21P6G1-72.0
MCDR3-B-25P6G1-72.0
MCDR3-B-31P6G1-72.0
MCDR3-B-37P6G1-72.0
MCDR3-B-51P6G1-72.0
MCDR3-B- 9P6G9-72.0
MCDR3-B-15P6G9-72.0
MCDR3-B-21P6G9-72.0
MCDR3-B-25P6G9-72.0
MCDR3-B-31P6G9-72.0
MCDR3-B-37P6G9-72.0
MCDR3-B-51P6G9-72.0
MCDR3-B- 9P6Q1-72.0
MCDR3-B-15P6Q1-72.0
MCDR3-B-21P6Q1-72.0
MCDR3-B-25P6Q1-72.0
MCDR3-B-31P6Q1-72.0
MCDR3-B-37P6Q1-72.0
MCDR3-B-51P6Q1-72.0
MCDR3-B- 9P6Q9-72.0
MCDR3-B-15P6Q9-72.0
MCDR3-B-21P6Q9-72.0
MCDR3-B-25P6Q9-72.0
MCDR3-B-31P6Q9-72.0
MCDR3-B-37P6Q9-72.0
MCDR3-B-51P6Q9-72.0
MCDR3-B- 9S6G1-18.0
MCDR3-B-15S6G1-18.0
MCDR3-B-21S6G1-18.0
MCDR3-B-25S6G1-18.0
MCDR3-B-31S6G1-18.0
MCDR3-B-37S6G1-18.0
MCDR3-B-51S6G1-18.0
MCDR3-B- 9S6G1-36.0
MCDR3-B-15S6G1-36.0
MCDR3-B-21S6G1-36.0
MCDR3-B-25S6G1-36.0
MCDR3-B-31S6G1-36.0
MCDR3-B-37S6G1-36.0
MCDR3-B-51S6G1-36.0
MCDR3-B- 9S6G9-18.0
MCDR3-B- 15S6G9-18.0
MCDR3-B- 21S6G9-18.0
MCDR3-B-25S6G9-18.0
MCDR3-B-31S6G9-18.0
MCDR3-B-37S6G9-18.0
MCDR3-B-51S6G9-18.0
MCDR3-B- 9S6G9-36.0
MCDR3-B-15S6G9-36.0
MCDR3-B-21S6G9-36.0
MCDR3-B-25S6G9-36.0
MCDR3-B-31S6G9-36.0
MCDR3-B-37S6G9-36.0
MCDR3-B-51S6G9-36.0
MCDR3-B- 9S5L4-0.5
MCDR3-B-15S5L4-0.5
MCDR3-B-21S5L4-0.5
MCDR3-B-25S5L4-0.5
MCDR3-B-31S5L4-0.5
Military Part No.
M83513/09-F05
M83513/09-G05
M83513/09-A06
M83513/09-B06
M83513/09-C06
M83513/09-D06
M83513/09-E06
M83513/09-F06
M83513/09-G06
M83513/09-A07
M83513/09-B07
M83513/09-C07
M83513/09-D07
M83513/09-E07
M83513/09-F07
M83513/09-G07
M83513/09-A08
M83513/09-B08
M83513/09-C08
M83513/09-D08
M83513/09-E08
M83513/09-F08
M83513/09-G08
M83513/09-A09
M83513/09-B09
M83513/09-C09
M83513/09-D09
M83513/09-E09
M83513/09-F09
M83513/09-G09
M83513/09-A10
M83513/09-B10
M83513/09-C10
M83513/09-D10
M83513/09-E10
M83513/09-F10
M83513/09-G10
M83513/09-A11
M83513/09-B11
M83513/09-C11
M83513/09-D11
M83513/09-E11
M83513/09-F11
M83513/09-G11
M83513/09-A12
M83513/09-B12
M83513/09-C12
M83513/09-D12
M83513/09-E12
M83513/09-F12
M83513/09-G12
M83513/09-A13
M83513/09-B13
M83513/09-C13
M83513/09-D13
M83513/09-E13
M83513/09-F13
M83513/09-G13
M83513/09-A14
M83513/09-B14
MICRODOT Part No.
MCDR3-B-37S5L4-0.5
MCDR3-B-51S5L4-0.5
MCDR3-B- 9S5L4-1.0
MCDR3-B-15S5L4-1.0
MCDR3-B-21S5L4-1.0
MCDR3-B-25S5L4-1.0
MCDR3-B-31S5L4-1.0
MCDR3-B-37S5L4-1.0
MCDR3-B-51S5L4-1.0
MCDR3-B- 9S5L5-0.5
MCDR3-B-15S5L5-0.5
MCDR3-B-21S5L5-0.5
MCDR3-B-25S5L5-0.5
MCDR3-B-31S5L5-0.5
MCDR3-B-37S5L5-0.5
MCDR3-B-51S5L5-0.5
MCDR3-B- 9S5L5-1.0
MCDR3-B-15S5L5-1.0
MCDR3-B-21S5L5-1.0
MCDR3-B-25S5L5-1.0
MCDR3-B-31S5L5-1.0
MCDR3-B-37S5L5-1.0
MCDR3-B-51S5L5-1.0
MCDR3-B- 9S6Q1-18.0
MCDR3-B-15S6Q1-18.0
MCDR3-B-21S6Q1-18.0
MCDR3-B-25S6Q1-18.0
MCDR3-B-31S6Q1-18.0
MCDR3-B-37S6Q1-18.0
MCDR3-B-51S6Q1-18.0
MCDR3-B- 9S6Q1-36.0
MCDR3-B-15S6Q1-36.0
MCDR3-B-21S6Q1-36.0
MCDR3-B-25S6Q1-36.0
MCDR3-B-31S6Q1-36.0
MCDR3-B-37S6Q1-36.0
MCDR3-B-51S6Q1-36.0
MCDR3-B- 9S6Q9-18.0
MCDR3-B-15S6Q9-18.0
MCDR3-B-21S6Q9-18.0
MCDR3-B-25S6Q9-18.0
MCDR3-B-31S6Q9-18.0
MCDR3-B-37S6Q9-18.0
MCDR3-B-51S6Q9-18.0
MCDR3-B- 9S6Q9-36.0
MCDR3-B-15S6Q9-36.0
MCDR3-B-21S6Q9-36.0
MCDR3-B-25S6Q9-36.0
MCDR3-B-31S6Q9-36.0
MCDR3-B-37S6Q9-36.0
MCDR3-B-51S6Q9-36.0
MCDR3-B- 9S6G1-72.0
MCDR3-B-15S6G1-72.0
MCDR3-B-21S6G1-72.0
MCDR3-B-25S6G1-72.0
MCDR3-B-31S6G1-72.0
MCDR3-B-37S6G1-72.0
MCDR3-B-51S6G1-72.0
MCDR3-B- 9S6G9-72.0
MCDR3-B-15S6G9-72.0
1
33
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
MCDR (Plastic Shell) (Continued)
Military Part No.
M83513/09-C14
M83513/09-D14
M83513/09-E14
M83513/09-F14
M83513/09-G14
M83513/09-A15
M83513/09-B15
MICRODOT Part No.
MCDR3-B-21S6G9-72.0
MCDR3-B-25S6G9-72.0
MCDR3-B-31S6G9-72.0
MCDR3-B-37S6G9-72.0
MCDR3-B-51S6G9-72.0
MCDR3-B- 9S6Q1-72.0
MCDR3-B-15S6Q1-72.0
Military Part No.
M83513/09-C15
M83513/09-D15
M83513/09-E15
M83513/09-F15
M83513/09-G15
M83513/09-A16
M83513/09-B16
MICRODOT Part No.
MCDR3-B-21S6Q1-72.0
MCDR3-B-25S6Q1-72.0
MCDR3-B-31S6Q1-72.0
MCDR3-B-37S6Q1-72.0
MCDR3-B-51S6Q1-72.0
MCDR3-B- 9S6Q9-72.0
MCDR3-B-15S6Q9-72.0
Military Part No.
M83513/09-C16
M83513/09-D16
M83513/09-E16
M83513/09-F16
M83513/09-G16
MICRODOT Part No.
MCDR3-B-21S6Q9-72.0
MCDR3-B-25S6Q9-72.0
MCDR3-B-31S6Q9-72.0
MCDR3-B-37S6Q9-72.0
MCDR3-B-51S6Q9-72.0
MCK (Metal Shell)
Military Part No.
MICRODOT Part No.
M83513/10-A01*N
M83513/10-B01*N
M83513/10-C01*N
M83513/10-D01*N
M83513/10-E01*N
M83513/10-F01*N
M83513/10-A01*P
M83513/10-B01*P
M83513/10-C01*P
M83513/10-D01*P
M83513/10-E01*P
M83513/10-F01*P
M83513/10-A02*N
M83513/10-B02*N
M83513/10-C02*N
M83513/10-D02*N
M83513/10-E02*N
M83513/10-F02*N
M83513/10-A02*P
M83513/10-B02*P
M83513/10-C02*P
M83513/10-D02*P
M83513/10-E02*P
M83513/10-F02*P
M83513/10-A03*N
M83513/10-B03*N
M83513/10-C03*N
M83513/10-D03*N
M83513/10-E03*N
M83513/10-F03*N
M83513/10-A03*P
M83513/10-B03*P
M83513/10-C03*P
M83513/10-D03*P
M83513/10-E03*P
M83513/10-F03*P
M83513/11-G01*N
M83513/11-G01*P
M83513/11-G02*N
M83513/11-G02*P
M83513/11-G03*N
M83513/11-G03*P
M83513/12-H01*N
M83513/12-H01*P
M83513/12-H02*N
M83513/12-H02*P
M83513/12-H03*N
MCK-**-B- 9PRT1
MCK-**-B- 15PRT1
MCK-**-B- 21PRT1
MCK-**-B- 25PRT1
MCK-**-B- 31PRT1
MCK-**-B- 37PRT1
MCK-**-P- 9PRT1
MCK-**-P- 15PRT1
MCK-**-P- 21PRT1
MCK-**-P- 25PRT1
MCK-**-P- 31PRT1
MCK-**-P- 37PRT1
MCK-**-B- 9PRT1A
MCK-**-B- 15PRT1A
MCK-**-B- 21PRT1A
MCK-**-B- 25PRT1A
MCK-**-B- 31PRT1A
MCK-**-B- 37PRT1A
MCK-**-P- 9PRT1A
MCK-**-P- 15PRT1A
MCK-**-P- 21PRT1A
MCK-**-P- 25PRT1A
MCK-**-P- 31PRT1A
MCK-**-P- 37PRT1A
MCK-**-B- 9PRT1B
MCK-**-B- 15PRT1B
MCK-**-B- 21PRT1B
MCK-**-B- 25PRT1B
MCK-**-B- 31PRT1B
MCK-**-B- 37PRT1B
MCK-**-P- 9PRT1B
MCK-**-P- 15PRT1B
MCK-**-P- 21PRT1B
MCK-**-P- 25PRT1B
MCK-**-P- 31PRT1B
MCK-**-P- 37PRT1B
MCK-**-B- 51PRT1
MCK-**-P- 51PRT1
MCK-**-B- 51PRT1A
MCK-**-P- 51PRT1A
MCK-**-B- 51PRT1B
MCK-**-P- 51PRT1B
MCK-**-B-100PRT1
MCK-**-P-100PRT1
MCK-**-B-100PRT1A
MCK-**-P-100PRT1A
MCK-**-B-100PRT1B
Military Part No.
M83513/12-H03*P
M83513/13-A01*N
M83513/13-B01*N
M83513/13-C01*N
M83513/13-D01*N
M83513/13-E01*N
M83513/13-F01*N
M83513/13-A01*P
M83513/13-B01*P
M83513/13-C01*P
M83513/13-D01*P
M83513/13-E01*P
M83513/13-F01*P
M83513/13-A02*N
M83513/13-B02*N
M83513/13-C02*N
M83513/13-D02*N
M83513/13-E02*N
M83513/13-F02*N
M83513/13-A02*P
M83513/13-B02*P
M83513/13-C02*P
M83513/13-D02*P
M83513/13-E02*P
M83513/13-F02*P
M83513/13-A03*N
M83513/13-B03*N
M83513/13-C03*N
M83513/13-D03*N
M83513/13-E03*N
M83513/13-F03*N
M83513/13-A03*P
M83513/13-B03*P
M83513/13-C03*P
M83513/13-D03*P
M83513/13-E03*P
M83513/13-F03*P
M83513/14-G01*N
M83513/14-G01*P
M83513/14-G02*N
M83513/14-G02*P
M83513/14-G03*N
M83513/14-G03*P
M83513/15-H01*N
M83513/15-H01*P
M83513/15-H02*N
M83515/15-H02*P
MICRODOT Part No.
MCK-**-P-100PRT1B
MCK-**-B- 9SRT1
MCK-**-B- 15SRT1
MCK-**-B- 21SRT1
MCK-**-B- 25SRT1
MCK-**-B- 31SRT1
MCK-**-B- 37SRT1
MCK-**-P- 9SRT1
MCK-**-P- 15SRT1
MCK-**-P- 21SRT1
MCK-**-P- 25SRT1
MCK-**-P- 31SRT1
MCK-**-P- 37SRT1
MCK-**-B- 9SRT1A
MCK-**-B- 15SRT1A
MCK-**-B- 21SRT1A
MCK-**-B- 25SRT1A
MCK-**-B- 31SRT1A
MCK-**-B- 37SRT1A
MCK-**-P- 9SRT1A
MCK-**-P- 15SRT1A
MCK-**-P- 21SRT1A
MCK-**-P- 25SRT1A
MCK-**-P- 31SRT1A
MCK-**-P- 37SRT1A
MCK-**-B- 9SRT1B
MCK-**-B- 15SRT1B
MCK-**-B- 21SRT1B
MCK-**-B- 25SRT1B
MCK-**-B- 31SRT1B
MCK-**-B- 37SRT1B
MCK-**-P- 9SRT1B
MCK-**-P- 15SRT1B
MCK-**-P- 21SRT1B
MCK-**-P- 25SRT1B
MCK-**-P- 31SRT1B
MCK-**-P- 37SRT1B
MCK-**-B- 51SRT1
MCK-**-P- 51SRT1
MCK-**-B- 51SRT1A
MCK-**-P- 51SRT1A
MCK-**-B- 51SRT1B
MCK-**-P- 51SRT1B
MCK-**-B-100SRT1
MCK-**-P-100SRT1
MCK-**-B-100SRT1A
MCK-**-P-100SRT1A
Military Part No.
M83513/15-H03*N
M83513/15-H03*P
M83513/16-A01*N
M83513/16-B01*N
M83513/16-C01*N
M83513/16-D01*N
M83513/16-E01*N
M83513/16-F01*N
M83513/16-A01*P
M83513/16-B01*P
M83513/16-C01*P
M83513/16-D01*P
M83513/16-E01*P
M83513/16-F01*P
M83513/16-A02*N
M83513/16-B02*N
M83513/16-C02*N
M83513/16-D02*N
M83513/16-E02*N
M83513/16-F02*N
M83513/16-A02*P
M83513/16-B02*P
M83513/16-C02*P
M83513/16-D02*P
M83513/16-E02*P
M83513/16-F02*P
M83513/16-A03*N
M83513/16-B03*N
M83513/16-C03*N
M83513/16-D03*N
M83513/16-E03*N
M83513/16-F03*N
M83513/16-A03*P
M83513/16-B03*P
M83513/16-C03*P
M83513/16-D03*P
M83513/16-E03*P
M83513/16-F03*P
M83513/17-G01*N
M83513/17-G01*P
M83513/17-G02*N
M83513/17-G02*P
M83513/17-G03*N
M83513/17-G03*P
M83513/18-H01*N
M83513/18-H01*P
M83513/18-H02*N
MICRODOT Part No.
MCK-**-B-100SRT1B
MCK-**-P-100SRT1B
MCK-**-B- 9PRT3
MCK-**-B- 15PRT3
MCK-**-B- 21PRT3
MCK-**-B- 25PRT3
MCK-**-B- 31PRT3
MCK-**-B- 37PRT3
MCK-**-P- 9PRT3
MCK-**-P- 15PRT3
MCK-**-P- 21PRT3
MCK-**-P- 25PRT3
MCK-**-P- 31PRT3
MCK-**-P- 37PRT3
MCK-**-B- 9PRT3A
MCK-**-B- 15PRT3A
MCK-**-B- 21PRT3A
MCK-**-B- 25PRT3A
MCK-**-B- 31PRT3A
MCK-**-B- 37PRT3A
MCK-**-P- 9PRT3A
MCK-**-P- 15PRT3A
MCK-**-P- 21PRT3A
MCK-**-P- 25PRT3A
MCK-**-P- 31PRT3A
MCK-**-P- 37PRT3A
MCK-**-B- 9PRT3B
MCK-**-B- 15PRT3B
MCK-**-B- 21PRT3B
MCK-**-B- 25PRT3B
MCK-**-B- 31PRT3B
MCK-**-B- 37PRT3B
MCK-**-P- 9PRT3B
MCK-**-P- 15PRT3B
MCK-**-P- 21PRT3B
MCK-**-P- 25PRT3B
MCK-**-P- 31PRT3B
MCK-**-P- 37PRT3B
MCK-**-B- 51PRT3
MCK-**-P- 51PRT3
MCK-**-B- 51PRT3A
MCK-**-P- 51PRT3A
MCK-**-B- 51PRT3B
MCK-**-P- 51PRT3B
MCK-**-B-100PRT3
MCK-**-P-100PRT3
MCK-**-B-100PRT3A
34
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
Microminiature D
Connectors
MCK (Metal Shell) (Continued)
Military Part No.
M83515/18-H02*P
M83513/18-H03*N
M83513/18-H03*P
M83513/19-A01*N
M83513/19-B01*N
M83513/19-C01*N
M83513/19-D01*N
M83513/19-E01*N
M83513/19-F01*N
M83513/19-A01*P
M83513/19-B01*P
M83513/19-C01*P
M83513/19-D01*P
M83513/19-E01*P
M83513/19-F01*P
M83513/19-A02*N
M83513/19-B02*N
M83513/19-C02*N
M83513/19-D02*N
M83513/19-E02*N
M83513/19-F02*N
M83513/19-A02*P
M83513/19-B02*P
M83513/19-C02*P
M83513/19-D02*P
M83513/19-E02*P
M83513/19-F02*P
M83513/19-A03*N
M83513/19-B03*N
M83513/19-C03*N
M83513/19-D03*N
M83513/19-E03*N
M83513/19-F03*N
M83513/19-A03*P
M83513/19-B03*P
M83513/19-C03*P
M83513/19-D03*P
M83513/19-E03*P
M83513/19-F03*P
M83513/20-G01*N
M83513/20-G01*P
M83513/20-G02*N
M83513/20-G02*P
M83513/20-G03*N
M83513/20-G03*P
M83513/21-H01*N
M83513/21-H01*P
M83513/21-H02*N
M83515/21-H02*P
MICRODOT Part No.
MCK-**-P-100PRT3A
MCK-**-B-100PRT3B
MCK-**-P-100PRT3B
MCK-**-B- 9SRT3
MCK-**-B- 15SRT3
MCK-**-B- 21SRT3
MCK-**-B- 25SRT3
MCK-**-B- 31SRT3
MCK-**-B- 37SRT3
MCK-**-P- 9SRT3
MCK-**-P- 15SRT3
MCK-**-P- 21SRT3
MCK-**-P- 25SRT3
MCK-**-P- 31SRT3
MCK-**-P- 37SRT3
MCK-**-B- 9SRT3A
MCK-**-B- 15SRT3A
MCK-**-B- 21SRT3A
MCK-**-B- 25SRT3A
MCK-**-B- 31SRT3A
MCK-**-B- 37SRT3A
MCK-**-P- 9SRT3A
MCK-**-P- 15SRT3A
MCK-**-P- 21SRT3A
MCK-**-P- 25SRT3A
MCK-**-P- 31SRT3A
MCK-**-P- 37SRT3A
MCK-**-B- 9SRT3B
MCK-**-B- 15SRT3B
MCK-**-B- 21SRT3B
MCK-**-B- 25SRT3B
MCK-**-B- 31SRT3B
MCK-**-B- 37SRT3B
MCK-**-P- 9SRT3B
MCK-**-P- 15SRT3B
MCK-**-P- 21SRT3B
MCK-**-P- 25SRT3B
MCK-**-P- 31SRT3B
MCK-**-P- 37SRT3B
MCK-**-B- 51SRT3
MCK-**-P- 51SRT3
MCK-**-B- 51SRT3A
MCK-**-P- 51SRT3A
MCK-**-B- 51SRT3B
MCK-**-P- 51SRT3B
MCK-**-B-100SRT3
MCK-**-P-100SRT3
MCK-**-B-100SRT3A
MCK-**-P-100SRT3A
Military Part No.
M83513/21-H03*N
M83513/21-H03*P
M83513/22-A01*N
M83513/22-B01*N
M83513/22-C01*N
M83513/22-D01*N
M83513/22-E01*N
M83513/22-F01*N
M83513/22-A01*P
M83513/22-B01*P
M83513/22-C01*P
M83513/22-D01*P
M83513/22-E01*P
M83513/22-F01*P
M83513/22-A02*N
M83513/22-B02*N
M83513/22-C02*N
M83513/22-D02*N
M83513/22-E02*N
M83513/22-F02*N
M83513/22-A02*P
M83513/22-B02*P
M83513/22-C02*P
M83513/22-D02*P
M83513/22-E02*P
M83513/22-F02*P
M83513/22-A03*N
M83513/22-B03*N
M83513/22-C03*N
M83513/22-D03*N
M83513/22-E03*N
M83513/22-F03*N
M83513/22-A03*P
M83513/22-B03*P
M83513/22-C03*P
M83513/22-D03*P
M83513/22-E03*P
M83513/22-F03*P
M83513/23-G01*N
M83513/23-G01*P
M83513/23-G02*N
M83513/23-G02*P
M83513/23-G03*N
M83513/23-G03*P
M83513/24-H01*N
M83513/24-H01*P
M83513/24-H02*N
M83515/24-H02*P
M83513/24-H03*N
MICRODOT Part No.
MCK-**-B-100SRT3B
MCK-**-P-100SRT3B
MCK-**-B- 9PST1
MCK-**-B- 15PST1
MCK-**-B- 21PST1
MCK-**-B- 25PST1
MCK-**-B- 31PST1
MCK-**-B- 37PST1
MCK-**-P- 9PST1
MCK-**-P- 15PST1
MCK-**-P- 21PST1
MCK-**-P- 25PST1
MCK-**-P- 31PST1
MCK-**-P- 37PST1
MCK-**-B- 9PST1A
MCK-**-B- 15PST1A
MCK-**-B- 21PST1A
MCK-**-B- 25PST1A
MCK-**-B- 31PST1A
MCK-**-B- 37PST1A
MCK-**-P- 9PST1A
MCK-**-P- 15PST1A
MCK-**-P- 21PST1A
MCK-**-P- 25PST1A
MCK-**-P- 31PST1A
MCK-**-P- 37PST1A
MCK-**-B- 9PST1B
MCK-**-B- 15PST1B
MCK-**-B- 21PST1B
MCK-**-B- 25PST1B
MCK-**-B- 31PST1B
MCK-**-B- 37PST1B
MCK-**-P- 9PST1B
MCK-**-P- 15PST1B
MCK-**-P- 21PST1B
MCK-**-P- 25PST1B
MCK-**-P- 31PST1B
MCK-**-P- 37PST1B
MCK-**-B- 51PST1
MCK-**-P- 51PST1
MCK-**-B- 51PST1A
MCK-**-P- 51PST1A
MCK-**-B- 51PST1B
MCK-**-P- 51PST1B
MCK-**-B-100PST1
MCK-**-P-100PST1
MCK-**-B-100PST1A
MCK-**-P-100PST1A
MCK-**-B-100PST1B
Military Part No.
M83513/24-H03*P
M83513/25-A01*N
M83513/25-B01*N
M83513/25-C01*N
M83513/25-D01*N
M83513/25-E01*N
M83513/25-F01*N
M83513/25-A01*P
M83513/25-B01*P
M83513/25-C01*P
M83513/25-D01*P
M83513/25-E01*P
M83513/25-F01*P
M83513/25-A02*N
M83513/25-B02*N
M83513/25-C02*N
M83513/25-D02*N
M83513/25-E02*N
M83513/25-F02*N
M83513/25-A02*P
M83513/25-B02*P
M83513/25-C02*P
M83513/25-D02*P
M83513/25-E02*P
M83513/25-F02*P
M83513/25-A03*N
M83513/25-B03*N
M83513/25-C03*N
M83513/25-D03*N
M83513/25-E03*N
M83513/25-F03*N
M83513/25-A03*P
M83513/25-B03*P
M83513/25-C03*P
M83513/25-D03*P
M83513/25-E03*P
M83513/25-F03*P
M83513/26-G01*N
M83513/26-G01*P
M83513/26-G02*N
M83513/26-G02*P
M83513/26-G03*N
M83513/26-G03*P
M83513/27-H01*N
M83513/27-H01*P
M83513/27-H02*N
M83515/27-H02*P
M83513/27-H03*N
M83513/27-H03*P
MICRODOT Part No.
MCK-**-P-100PST1B
MCK-**-B- 9SST1
MCK-**-B- 15SST1
MCK-**-B- 21SST1
MCK-**-B- 25SST1
MCK-**-B- 31SST1
MCK-**-B- 37SST1
MCK-**-P- 9SST1
MCK-**-P- 15SST1
MCK-**-P- 21SST1
MCK-**-P- 25SST1
MCK-**-P- 31SST1
MCK-**-P- 37SST1
MCK-**-B- 9SST1A
MCK-**-B- 15SST1A
MCK-**-B- 21SST1A
MCK-**-B- 25SST1A
MCK-**-B- 31SST1A
MCK-**-B- 37SST1A
MCK-**-P- 9SST1A
MCK-**-P- 15SST1A
MCK-**-P- 21SST1A
MCK-**-P- 25SST1A
MCK-**-P- 31SST1A
MCK-**-P- 37SST1A
MCK-**-B- 9SST1B
MCK-**-B- 15SST1B
MCK-**-B- 21SST1B
MCK-**-B- 25SST1B
MCK-**-B- 31SST1B
MCK-**-B- 37SST1B
MCK-**-P- 9SST1B
MCK-**-P- 15SST1B
MCK-**-P- 21SST1B
MCK-**-P- 25SST1B
MCK-**-P- 31SST1B
MCK-**-P- 37SST1B
MCK-**-B- 51SST1
MCK-**-P- 51SST1
MCK-**-B- 51SST1A
MCK-**-P- 51SST1A
MCK-**-B- 51SST1B
MCK-**-P- 51SST1B
MCK-**-B-100SST1
MCK-**-P-100SST1
MCK-**-B-100SST1A
MCK-**-P-100SST1A
MCK-**-B-100SST1B
MCK-**-P-100SST1B
1
*C = Cadmium or N = Nickel (space applications only)
**C2 = Cadmium or N1 = Nickel (space applications only)
35
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Microminiature D Connectors
Engineering Notes
36
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
Introduction
Product Facts
n
n
n
n
Well-suited for external
conditions
Precise contact alignment
with extremely low engaging
forces
Product offering consists of
metal shell, plastic shell,
panel mount, printed circuit
board and strip connectors
Rectangular
Connectors
n
Designed for both military
and commercial applications
Metal shell connector
promotes high durability
and reliability
2
Twist Pin contact High
Density Microminiature
Connectors described in
this catalog comprise a
complete contact system
which is adaptable to a
numerous variety of form
factors. Precise contact
alignment, with extremely
low engaging forces, results
from the manner in which
the Twist Pin contact
system is packaged —
by constructing the male
contact as a breathing
helical spring, electrical
contact is achieved at many
points around the periphery
of the pin bundle.
Featured in this catalog is
the twist pin contact line,
which accommodates
round wire and Flat
Conductor Cable (FCC),
Edgeboard Connectors.
connectors in a strip (MCS)
format as well as JACKMATE
Connectors (MCJ Series)
format for small package
application requiring high
reliability.
Applications requiring
frequent mating and disconnect call for the metal shell
connector version. This
style connector promotes
high durability and reliability.
Edgeboard applications are
covered in this catalog with
a special High Density
Standard Module (HDSM)
Connector as well as
MIL-DTL-55302 (MCEM)
Connectors. The high
mating forces of these larger
connectors are greatly
reduced with the use of the
low force twist pins and
sockets which are standard
for this product line.
Designed for both military
and commercial applications, this latest innovation
is especially well-suited to
use in external conditions.
This catalog also features
light-weight plastic
37
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
Twist Pin Contact Data
Twist Pin — 24 gauge
Pin and Socket Contacts
The contact spring member
normally found in socket
contacts has been eliminated by creating a breathing
helical spring principle on
the pin contact — smaller,
more durable contacts
can be manufactured
economically.
Wire range 24-36 AWG solid & stranded.
38
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
MCE Series Plastic Shell Edgeboard Connectors
Plastic Shell Edge Board
Connectors
Designed for commercial
applications requiring
frequent disconnect and
connect, including data
recorders and computers.
Mother board connector
can be ordered to fit any
pattern on your circuit
board.
Units are available with contacts as few as 40 and as
many as 110. Wire sizes 28
through 24, any type of plating or color coding, any
kind of wire termination
including wire wrap — a
high degree of flexibility for
your military or commercial
application.
Rectangular
Connectors
This new connector features
the proven twist pin contact
with precision contact alignment with extremely low
engaging forces.
40 Contacts
2
Two hexagonal polarizing
keys can provide up to 36
different key combinations
are supplied.
Technical & Performance Data — Twist Pin Plastic Shell Connectors
Electrical
Contact Resistance — The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard 24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding
Voltage — 800 VAC RMS at sea level
(600 for solder pots); 200 VAC RMS at
70,000 feet [21,336m] (150 for solder
pots).
Corrosion Resistance (Per MILSTD-202C, Method 101B, Condition
B) — Both mated and unmated samples
do not exceed the maximum allowable
contact resistance (8 milliohms) when
subjected to the 48 hour salt spray test.
Durability — The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature.
Maximum Current Carrying
Capacity — No. 24 contact 3 amperes.
It must be recognized however, that all the
wires to a connector will not carry their
maximum current under all environmental conditions due to wire temperature.
Mechanical
Contact Engaging & Separation
Forces — 8.0 oz. max. [2.24N] (eng.),
0.5 oz. min.[.14N] (sep.)
Environmental
Temperature Range (Operating) —
-67°F to 257°F [-55° C to +125°C].
Vibration (Per MIL-STD-202C,
Method 204A, Condition D) — No
discontinuity in excess of 1 µ sec. during twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
G forces, whichever is less.
Materials
Insulator — Liquid Crystal Polymer
(LCP) per ASTM D5138 or
Polyphenylene Sulfide per
MIL-M-24519.
Contacts — Pin-contact: Copper alloy
and beryllium copper alloy make up the
complete construction. Socket contact:
Copper alloy.
Hardware — Corrosion resistant
stainless steel.
Finishes
Insulator — None.
Contacts — Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Hardware — Passivated per QQ-P-35.
39
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
MCE Series Plastic Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
.050
Typ.
[1.27]
.100
Typ.
[2.54]
A
B
.250
[6.35]
.075
[1.91]
C
.225
[5.72]
.075
Typ.
[1.91]
.150
Typ.
[3.81]
Detail B
.050
[1.27]
Polarization Key Location
2 Plcs.
Pin Contact/
Lead Assembly
A
Insulator
.250–.300
Typ.
[6.35–7.62]
Epoxy
.325–.375
Typ.
[8.26–9.53]
A
25 AWG Copper
Wire, Gold Plated,
Solder Dipped
B4
Ø .091–.098
[2.31–2.49]
2 Plcs.
B3
B2
B1
B
Section A-A
#2-56 UNC-2B Thd.
A1
A2
A3
Hex Polarizing Key
2 Supplied (Loose Packed)
A4
Daughter Board (Socket Side)
.250
[6.35]
A
.071–.076
[1.80–1.93]
.100
Min.
[2.54]
Solder Dip Typ.
Ø .093–.098 Thru .187
[2.36–2.49 Thru 4.75]
(2 Plcs.)
(Far ear only)
Ø.187 Thru
[4.75] 2 Plcs.
(Near Ear Only)
.030
Max.
[.762]
B
.300
[7.62]
A
#24 AWG Copper Wire
.250
[6.35]
Max.
Typ.
.2 00±.015
[5.08 ±.381]
Typ.
.450
[11.43]
.2 75
[6.99]
2 Plcs.
.180
[4.57]
Epoxy
.075
[1.91]
.2
5 0
[6.35]
Insulator
A
B4
B3
B2
B1
Polarization Key Location
2 Plcs.
Socket Contact/
Lead Assembly
Section A-A
#2-56 UNC-2B Thd.
A4
A3
A2
A1
.050
[1.27]
Hex Polarizing Key
2 Supplied (Loose Packed)
C
40
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
MCE Series Plastic Shell Edgeboard Connectors (Continued)
Dimensions for .062 [1.57] PC Board
A
± .010
[± .254]
1.750
44.45
1.850
46.99
2.750
69.85
3.500
88.90
No. of
Contacts
40
44
80
110
B
± .005
[± .127]
1.500
38.10
1.600
40.64
2.500
63.50
3.250
82.55
C
Basic
.950
24.13
1.050
26.67
1.950
49.53
2.700
68.58
Notes: For PC Boards of different widths, consult Tyco Electronics.
Rectangular
Connectors
2
How To Specify
S — Solder pots 26 AWG max.
Z — Wire layout as shown on page 40.
X — Special, does not fit description below.
MCE
R1
40
P
6
L
4
0.5
Lead Length in Inches (min.)
Connector Series
Material
Insulation Color or Finish
R1 — Liquid Crystal Polymer or
1 — All white wire
2 — All yellow wire
3 — All gray wire
Polyphenylene Sulfide
4 — Gold plated
5 — Tin dipped gold plated
6 — Bare (unfinished)
Layout
40, 44, 80, 110
Wire Type
Contact Type
*A — Type E, 7 strand
*D — Type ET, 19 strand
*B — Type ET, 7 strand F — 7 strand per MIL-22759/11
*C — Type E, 19 strand
(#28 AWG only)
P — Pin (Mother Board Connector)
S — Socket (Daughter Board Connector)
7 — Color coded per
MIL-STD-681, System 1
8 — Special color code
9 — Ten solid color repeating
(starts with black)
G — 19 strand per MIL-22759/11
26 AWG, 24 AWG
L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Wire Size
4-24 AWG
5-25 AWG
6-26AWG
8-28 AWG
0-30 AWG
Mounting — Holes on the Daughter Board side can be modified.
41
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
MCEM Series Metal Shell Edgeboard Connectors
Metal Shell Edge Board
Connectors
n
n
n
n
n
n
n
Meets MIL-DTL-55302
performance requirements
Layouts 128 and 184 are QPL
to slash sheets 120, 121,
122 and 123
Connectors are available in
40, 44, 80, 110, 128, 152,
and 184 positions
Utilizes low force twist pins
and our low force sockets.
Mating forces in the 3 to 4
oz. [.83 to 1.11N] range per
contact are typical with low
force pin and low force
socket
Designed for surface
mounting and through-theboard mounting
Available termination
n Mother board (pin side) —
cactus bend
n Daughter board (socket
side) — coke bottle,
right-angle bend to “A”
or “B” side
n Solder pots, and variety
of other wire terminations
for pin and socket
connectors available at
customer’s request
Two hexagonal polarizing
keys (per MIL-DTL-55302
slash sheet 124) are
provided. Jackscrew
hardware is available. For
programmable keying/
jacking modifications
consult Tyco Electronics
In addition to the plastic
versions of the 2 piece
edgeboard connectors, a
metal shell assembly is
designed and tooled. The
metal shells are made of
aluminum alloy per QQ-A591. The insert material is
Diallyl phthalate,
Polyphenylene sulfide
(Ryton) or Liquid Crystal
Polymer (LCP). The techni-
cal and performance data is
essentially the same as that
shown for the MCDM Series
on page 25. These are
rugged, durable connectors
and are ideal for use in
areas of high density packaging and where frequent
connect and disconnects
are required. Designed
initially for applications in
airborne data recorders,
computers and associated
equipment in navigational
systems. The mother board
connector can be ordered
to fit any pattern on the
circuit board. The units can
also be provided with contacts on .100 [2.54] spacing
which results in .100 [2.54]
grid pattern.
Electrical
Mechanical
Materials and Finish
Contact Resistance — The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms.
The average resistance value at 100
microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage —
800 VAC RMS at sea level (600 for
solder pots); 200 VAC RMS at 70,000
feet [21,336m] (150 for solder pots).
Durability — Less than the maximum
allowable, 8 milliohms after 500 mating
cycles.
Insulation Resistance — Greater than
5,000 megohms at room ambient temperature.
Maximum Current Carrying
Capacity — No. 24 contact 3 amperes.
Contact Engaging & Separation
Forces — 5.0 oz. max. [1.39N] (eng.),
0.5 oz. min. [.14N] (sep.).
Shells — High grade aluminum alloy,
electroless nickel plated per AMS 2404.
Insulator — Diallyl Phthalate per MILM-14, Type SDG-F (for 128 & 184);
Polyphenylene Sulfide per MIL-M24519 (for 40, 44, 80, 110 & 152), or
Liquid Crystal Polymer per ASTM
D5138.
Contacts — Pin (low force): beryllium
and OFHC copper, gold plated. Socket
(low force): Copper alloy, gold plated.
Hardware — Corrosion resistant
stainless steel passivated.
Performance Data
Environmental
Temperature Range —
-67°F to 302°F [-55° C to +150°C] for
Diallyl Phthalate; -67°F to 257°F [-55°
C to +125°C] for Polyphenylene Sulfide.
Vibration — No discontinuity in
excess of 1 µ sec. during twelve 20
minute sweeps from 10 to 2000 CPS at
.06 double amplitude or 20 G forces,
whichever is less.
42
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
40, 44, 80, 110 & 128 Positions
Rectangular
Connectors
A
#2-56 UNC-2B Thd.
B
.250
[6.35]
.050
Typ.
[1.27]
Hex Polarizing Key
2 Supplied (Loose Packed)
.050
[1.27]
Polarizing Key Location
2 Plcs.
Pin Contact/Lead Assy.
Insulator Assy.
.400
[10.16]
A
2
Epoxy
A
Ø .091–.098 Thru
[2.31–2.49] 2 Plcs.
.050
Typ.
[1.27]
.100
Typ.
[2.54]
.260–.300
Typ.
[6.60–7.62]
25 AWG Copper
Wire, Gold Plated,
Solder Dipped
B3
B4
B2
B1
A4
A3
A1
A2
.325–.375
Typ.
[8.26–9.53]
.075
Typ.
[1.91]
.075
Typ.
[1.91]
Section A-A
Dimensions for .062 [1.57] PC Board
No. of
Contacts
40
44
80
110
128
A
± .010
[± .254]
1.750
44.45
1.850
46.99
2.750
69.85
3.500
88.90
3.950
100.33
B
± .005
[± .127]
1.500
38.10
1.600
40.64
2.500
63.50
3.250
82.55
3.700
93.98
Note: For PC Boards of different widths, consult
Tyco Electronics.
Items in bold italic are qualified to MIL-DTL-55302.
Configuration shown is per MIL-DTL-55302/120.
43
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Daughter Board
(Socket Side)
40, 44, 80, 110 & 128 Positions
A
.071–.076
[1.80–1.93]
2 Plcs.
B
B
Ø .091–.098 Thru Hole
[2.31–2.49] 2 Plcs.
C’Bore Ø .187 [4.75] x
.045 [1.14] Deep
(A Side Only)
Section B-B
.030
Max.
[0.76]
.150 Min.
[3.81] Solder Dip Typ.
24 AWG
Copper Wire,
Gold Plated
.250
Max.
[6.35]
.200 ±.015
[5.08 ± .381]
B
.330
[8.38]
2 Plcs.
.275
[6.99]
.180
[4.57]
2 Plcs.
.060
3 Plcs.
[1.52]
Ø .187 Thru 1 Wall
[4.75]
.250
[6.35]
.050
Typ.
[1.27]
.125
2 Plcs.
[3.18]
.071 Min.
[1.80] at B
A
Epoxy
Insulator Assy.
Skt. Contact/
Lead Assy.
.250
2 Plcs.
[6.35]
Retaining Pin Holes
4 Plcs.
.050
[1.27]
.050
Typ.
[1.27]
Section A-A
A
B2
B1
A1
Polarizing Key Location
2 Plcs.
A2
Polarizing Key
2 Supplied
(Loose Packed)
Note: Board thickness .070 [1.78] Max.
Retaining Pin
4 Supplied
(Loose Packed)
S — Solder pots for 26 AWG max.
How To Specify
Z — Wire layout as illustrated.
X — Special, does not fit description below.
MCE
M1
128
L
6
L
4
0.5
Lead Length in Inches (min.)
Connector Series
Material
Insulation Color or Finish
M1 — Metal Shell
1 — All white wire
2 — All yellow wire
3 — All gray wire
Layout
40, 44, 80, 110, 128, 152, 184
4 — Gold plated
7 — Color coded per
5 — Tin dipped gold plated
MIL-STD-681, System 1
6 — Bare (unfinished)
8 — Special color code
9 — Ten solid color repeating
(starts with black)
Wire Type
Contact Type
L — Low Force Pin (Mother Board Connector)
SL — Low Force Socket* (Daughter Board Connector)
*A — Type E, 7 strand
*B — Type ET, 7 strand
*C — Type E, 19 strand
*D — Type ET, 19 strand
F — 7 strand per MIL-C-22759/11
(#28 AWG only)
G — 19 strand per MIL-C-22759/11
26 AWG, 24 AWG
L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Wire Size
4–24 AWG
Items in bold italic are qualified to MIL-DTL-55302.
Configuration shown is per MIL-DTL-55302/121.
5–25 AWG
6–26 AWG
8–28 AWG
0–30 AWG
Polarization – Hexagonal hardware is supplied with connector.
Mounting — Standard mounting holes are shown. Consult Tyco Electronics for modifications.
44
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
152 & 184 Positions
A
Polarizing Key Location
2 Plcs.
B
#2-56 UNC-2B Thd.
B/2
.075
[1.91]
A
B
.343
[8.71]
D
2 Plcs
.500
[1.27]
Hex Polarizing Key
2 Supplied (Loose Packed)
.050 Typ.
[1.27]
Pin Contact/
Lead Assembly
C
A
Rectangular
Connectors
.400
[10.16]
.270
[6.86]
Insulator
Subassembly
Retaining Pin Hole
4 Plcs.
25 AWG
Copper Wire,
Gold Plated,
Solder Dipped
A
.250
[6.35]
B3
B4
B2
B1
A4
A3
A1
A2
.250–.300 Typ.
[6.35–7.62]
.325–.375 Typ.
A1
[8.26–9.53]
A2
B1
B2
.075
Typ.
[1.91]
.075
[1.91] Typ.
2
Section A-A
Daughter Board (Socket Side)
152 & 184 Positions
Ø .091-.098 [2.31-2.49] Thru C'Bore
Ø .187 [4.75] x .045 [1.14], 3 Plcs.,
(A Side Only)
.343
[8.71]
.125
2 Plcs.
[3.18]
.060
[1.52]
3 Plcs.
A
B
B
.071 Min.
[1.80]
Ø .187 Thru
[4.75] 3 Plcs.
(B Side Only)
Section B-B
B
.250
2 Plcs.
[6.35]
C
.242
[6.15]
.075
[1.91] Typ.
B/2 2 Plcs.
D
.500
[12.70]
.700
[17.78]
A
Retaining Pin Hole
4 Plcs.
A3
152
184
A
± .010
[± .254]
4.550
115.57
5.800
147.32
Epoxy
Insulator
Assy.
A4
No. of
Contacts
.150 Min.
[3.81] Typ.
Solder Dip
.053
[1.35]
Min. at B
B3
B4
.050
Typ.
[1.27]
.200
Typ.
[5.08]
.250 Max.
[6.35] Typ.
A
Polarizing Key Locations
2 Plcs.
24 AWG
Copper Wire,
Gold Plated
.030
Max.
[.762]
B
± .005
[± .127]
4.300
109.22
5.550
140.97
B2
B1
Section A-A
Skt. Contact/
Lead Assy.
A1
A2
Retaining Pin
4 Supplied
Polarizing Key (Loose Packed)
2 Supplied
(Loose Packed)
C
Basic
D
Basic
4.750
120.65
5.000
127.00
1.850
46.99
2.250
57.15
45
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
JACKMATE MCJ(M) Series Plastic (Metal) Shell Center Jackscrew Connectors
JACKMATE Connectors are
the first Twist Pin contact
assemblies designed to
accommodate center
jackscrews that provide
jacking action when mating
or unmating the connectors.
Although the units were
initially developed for high
density cord-to-cord or
in-line applications, either
plug or receptacle can be
adapted to a PC board. The
jacking hardware consist of
a threaded bushing and a
captivated jackscrew which
are made of corrosion
resistant stainless steel
and are molded into the
JACKMATE Connector
Insulator.
The twist pin contacts are
on .050 [1.27] center-to-
center linear spacing and
contact terminations are
available in solid wire or
stranded wire. There is a
high degree of flexibility
with this JACKMATE connector design for commercial or military applications.
Available om MCJ(M) Series
Plastic (Metal) Shells.
JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors
JACKMATE Technical & Performance Data for Plastic Shell
Electrical
Contact Resistance — The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard 24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level; 150
VAC at 70,000 feet [21,336m]
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m].
Corrosion Resistance (Per MIL-STD202C, Method 101B, Condition B) —
Both mated and unmated samples do not
exceed the maximum allowable contact
resistance (8 milliohms) when subjected
to the 48 hour salt spray test.
Durability — The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature for
the materials listed under “Materials”.
Maximum Current Carrying
Capacity — No. 24 contact 3 amperes.
It must be recognized, however, that all
the wires to a connector will not carry
their maximum current under all
environmental conditions due to wire
temperature.
Mechanical
Materials
Contact Engaging & Separation
Forces — 8.0 oz. max. [2.22N] (eng.),
0.5 oz. min. [.14N] (sep.).
Insulator — Glass filled Nylon Type 6.
Contacts — Pin contact: copper alloy
and beryllium copper alloy make up the
complete construction; Socket contact:
copper alloy.
Hardware — Corrosive resistant stainless steel.
Environmental
Temperature Range (Operating) —
-67°F to 257°F [-55° C to 125°C].
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) — No
discontinuity in excess of 1 µ sec. during twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
G forces, whichever is less.
Finishes
Contacts — Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Hardware — Passivated Per QQ-P-35.
10 & 14 Contact Layout
.165
[4.19]
.165
[4.19]
.075
[1.91]
.285
[7.24]
.050
Typ.
[1.27]
.570
[14.00]
.235
[5.97]
.470
[11.94]
.075
[1.91]
.050 Typ.
[1.27]
Guide Pin
2 Plcs.
Bushing
.300
[7.62]
Jackscrew
(.050 hex wrench
req'd to turn screw)
30
30
14 Layout
.120
[3.05]
10 Layout
Receptacle
Plug
46
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors (Continued)
26, 38 & 46 Contact Layout
.075
[1.91]
.165
[4.19]
.050
[1.27]
Typ.
.635
[16.13]
.300
[7.62]
.165
[4.19]
.165
[4.19]
.585
[14.86]
1.270
[32.26]
.120
[3.05]
Jackscrew
#0-80
UNF-2A
Thd.
.438
[11.13]
1.170
[29.72]
.870
[22.10]
Guide Pin
38 Layout
26 Layout
.285
[7.24]
.050
Typ.
[1.27]
Receptacle
.120
[3.05]
.050
Typ.
[1.27]
Section A-A
Plug
.300
[7.62]
Bushing
#0-80 UNF-2B
Thd.
.610
[15.49]
Bushing
#0-80 UNF-2B Thd.
Rectangular
Connectors
42 Layout
A
A
.305
[7.75]
Jackscrew
#0-80 UNF-2A
Thd.
Guide Pin
46 Layout
Receptacle
2
Plug
How To Specify
S Solder pot for 26 AWG maximum stranded wire.
X Special, does not fit description below.
MCJ
B2
10
P
4
L
4
0.5
Lead Length in Inches (min.)
Connector Series
Shell Material
Insulation Color or Finish
B2 Glass filled nylon, type 6/10, blue
1 All white wire
2 All yellow wire
3 All gray wire
Layout (Positions)
4 Gold plated
5 Tin dipped gold plated
6 Bare (unfinished)
10, 14, 26, 38, 42, 46
7 Color coded per
MIL-STD-681, System 1
8 Special color code
9 Ten solid color repeating
(starts with black)
Wire Type
Contact Type
*A Type E, 7 strand
*B Type ET, 7 strand
*C Type E, 19 strand
P Pin
S Socket
*D Type ET, 19 strand
F 7 strand per MIL-C-22759/11
(#28 AWG only)
G 19 strand per MIL-C-22759/11
26 AWG, 24 AWG
L Copper, solid
Q Stranded per MIL-W-22759/33
*Per MIL-W-16878
Wire Size
4—24 AWG
5—25 AWG
6—26 AWG
8—28 AWG 0—30 AWG
Contact Arrangement as Viewed from the Engaging Face of the Pin Side
21
38
1
20
14
Guide Pin
Guide Pin
10
15
26
Guide Pin
Guide Pin
38 Positions
46
26 Positions
Guide Pin
10 Positions
20
1
6
1
36
1
6
1
Guide Pin
7
20
27
11
1
7
14
21
Guide Pin
Guide Pin
Guide Pin
46 Positions
14 Positions
42
42 Positions
Guide pin locations illustrated are for standards configuration only. Any location is available.
Guide pins are supplied in socket connectors and blank cavities are in pin connector.
47
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors
Technical and Performance
Data for Metal Shell
Electrical
Contact Resistance — The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard 24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level; 150
VAC at 70,000 feet [21,336m].
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m].
Corrosion Resistance (Per MILSTD-202C, Method 101B, Condition
B) — Both mated and unmated samples
do not exceed the maximum allowable
contact resistance (8 milliohms) when
subjected to the 48 hour salt spray test.
Durability — The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature for
the materials listed under “Materials”.
Maximum Current Carrying
Capacity — No. 24 contact 3 amperes.
It must be recognized, however, that all
the wires to a connector will not carry
their maximum current under all environmental conditions due to wire temperature.
Mechanical
Contact Engaging & Separation
Forces — 8.0 oz. max. [2.22N] (eng.),
0.5 oz. min.[.14N] (sep.).
Environmental
Temperature Range (Operating) —
-67°F to 302°F [-55°C to 150°C] for
Diallyl Phthalate.
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) — No
discontinuity in excess of 1 µ sec. during twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
G forces, whichever is less.
Materials
Insulator — Diallyl Phthalate per MILM-14, Type SDG-F.
Contacts — Pin contact: copper alloy
and beryllium copper alloy make up the
complete construction; Socket contact:
copper alloy.
Body Shells — Pin body shell: stainless steel, Types 304, Condition A per
QQ-S-766; Socket body shell: aluminum
alloy per QQ-A-591, A-380 alloy.
Hardware — Corrosion resistant
stainless steel.
Finishes
Contacts — Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Body Shells — Pin body shell: passivated per MIL-F-14072 (E-300); Socket
body shell: electroless nickel per AMS
204, Class 3, except thickness is
0.001/0.0015 [0.025/0.038].
Hardware — Passivated per
QQ–P–35.
Note: Insulators are molded into
their metal shells —
No bonded joint is used.
*Standard material used unless
otherwise specified.
Plug (Pin Side)
A Polarization
Shell Type M1
B Polarization
Jackscrew 2-56 UNC-2B Thd.
Contact Pin
.199
.300 [5.05]
[7.62]
Shell
Insert
.180
[4.57]
.046 Rad.
[1.17] Typ.
#10
.187
[4.75]
.078 Hex
[1.98] Socket
#1
.350
[8.89]
.125 Rad.
[3.18] Typ.
#48
#41
.830
[21.08]
Jackscrew
48
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors (Continued)
Receptacle (Socket Side)
Shell Type M1
Shell Type M2
.830
[21.08]
.125
Sq.
[3.18]
.050 BSC
[1.27] Typ.
A Polarization
Bushing
#41
.125 Rad.
[3.18] 2 Plcs.
#48
#48
#41
.030 Rad.
[0.76] 4 Plcs.
#1
.160 .005
2 Plcs.
[4.06 0.13]
#10
.046 Rad.
[1.17] 2 Plcs.
Rectangular
Connectors
.050 2 Plcs.
[1.27]
.010
.355 +– .005
0.25
[9.02]+– 0.13
.050 BSC
[1.27] Typ.
#10
#1
B Polarization
Interfacial Seal Silicon Rubber
Bushing Stainless Steel 2-56 UNC-2B Thd.
.094 Rad.
[2.39] 2 Plcs.
Full Rad. Typ.
.094 ±.005
2 Plcs.
[2.39 ±0.13]
.310
[7.87]
.070 ±.005
[1.78 ±0.13]
2 Plcs.
2
.108 ±.005
2 Plcs.
[2.74 ±0.13]
Insert
.200 ±.005
[5.08 ±0.13]
2 Plcs.
Contact Skt.
How To Specify
S Solder pot for 26 AWG maximum stranded wire.
X Special, does not fit description below.
MCJ
JACKMATE Connector Series
M1
A
48
P
4
L
4
0.5
Lead Length in Inches (min.)
Shell Material
Insulation Color or Finish
M1 Metal Shell (Standard)
M2 Metal Shell (Special receptacles only)
1 All white wire
2 All yellow wire
3 All gray wire
4 Gold plated
5 Tin dipped gold plated
6 Bare (unfinished)
Polarizing Position
A, B
7 Color coded per
MIL-STD-681, System 1
8 Special color code
9 Ten solid color repeating
(starts with black)
Wire Type
*A Type E, 7 strand
*B Type ET, 7 strand
*C Type E, 19 strand
Layout (Positions)
48
Contact Type
*D Type ET, 19 strand
F 7 strand per
MIL-C-22759/11
(#28 AWG only)
G 19 strand per MIL-C-22759/11
26 AWG, 24 AWG
L Copper, solid
Q Stranded per MIL-W-22759/33
*Per MIL-W-16878
P Pin
S Socket
Wire Size
4—24 AWG 5—25 AWG 6—26 AWG 8—28 AWG
0—30 AWG
49
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
MCS Series Strip Connectors
Strip Connectors
MCS Plastic Strip
C
C
.050 Typ.
[1.27]
.283
[7.19]
A
Lead
Epoxy
Skt. Contact
Insulator
Insulator
Epoxy
.070
[1.78]
Pin Contact
.070
[1.78]
C Max.
.070 [1.78]
.120 [3.05]
.170 [4.32]
.220 [5.59]
.270 [6.86]
.320 [8.13]
.420 [10.67]
.420 [10.67]
.470 [11.94]
.520 [13.21]
.570 [14.48]
.620 [15.75]
.670 [17.02]
.720 [18.29]
.770 [19.56]
.820 [20.83]
.870 [22.10]
.920 [23.37]
.970 [24.64]
1.020 [25.91]
1.070 [27.18]
1.120 [28.45]
1.170 [29.72]
1.220 [30.99]
1.270 [32.26]
1.320 [33.53]
1.370 [34.80]
1.420 [36.07]
1.470 [37.34]
1.520 [38.61]
.035
Max.
[.889]
For Solid Wire
.125
Max.
[3.18]
For Insulated Wire
A
Section A-A
Part No. By Size
MCSAR*-1**
MCSAR*-2**
MCSAR*-3**
MCSAR*-4**
MCSAR*-5**
MCSAR*-6**
MCSAR*-7**
MCSAR*-8**
MCSAR*-9**
MCSAR*-10**
MCSAR*-11**
MCSAR*-12**
MCSAR*-13**
MCSAR*-14**
MCSAR*-15**
MCSAR*-16**
MCSAR*-17**
MCSAR*-18**
MCSAR*-19**
MCSAR*-20**
MCSAR*-21**
MCSAR*-22**
MCSAR*-23**
MCSAR*-24**
MCSAR*-25**
MCSAR*-26**
MCSAR*-27**
MCSAR*-28**
MCSAR*-29**
MCSAR*-30**
.050 Typ.
[1.27]
.100
[2.54]
B
Plug
Part No. By Size
MCSAR*-31**
MCSAR*-32**
MCSAR*-33**
MCSAR*-34**
MCSAR*-35**
MCSAR*-36**
MCSAR*-37**
MCSAR*-38**
MCSAR*-39**
MCSAR*-40**
MCSAR*-41**
MCSAR*-42**
MCSAR*-43**
MCSAR*-44**
MCSAR*-45**
MCSAR*-46**
MCSAR*-47**
MCSAR*-48**
MCSAR*-49**
MCSAR*-50**
MCSAR*-51**
MCSAR*-52**
MCSAR*-53**
MCSAR*-54**
MCSAR*-55**
MCSAR*-56**
MCSAR*-57**
MCSAR*-58**
MCSAR*-59**
MCSAR*-60**
C Max.
1.570 [39.88]
1.620 [41.15]
1.670 [42.42]
1.720 [43.69]
1.770 [44.96]
1.820 [46.23]
1.870 [47.50]
1.920 [48.77]
1.970 [50.04]
2.020 [51.31]
2.070 [52.58]
2.120 [53.85]
2.170 [55.12]
2.220 [56.39]
2.270 [57.66]
2.320 [58.93]
2.370 [60.20]
2.420 [61.47]
2.470 [62.74]
2.520 [64.01]
2.570 [65.28]
2.620 [66.55]
2.670 [67.82]
2.720 [69.09]
2.770 [70.36]
2.820 [71.63]
2.870 [72.90]
2.920 [74.17]
2.970 [75.44]
3.020 [76.71]
Lead
B
Section B-B
Receptacle
.035
Max.
[.889]
For Solid Wire
.125
Max.
[3.18]
For Insulated Wire
Part No. By Size
MCSAR*-61**
MCSAR*-62**
MCSAR*-63**
MCSAR*-64**
MCSAR*-65**
MCSAR*-66**
MCSAR*-67**
MCSAR*-68**
MCSAR*-69**
MCSAR*-70**
MCSAR*-71**
MCSAR*-72**
MCSAR*-73**
MCSAR*-74**
MCSAR*-75**
MCSAR*-76**
MCSAR*-77**
MCSAR*-78**
MCSAR*-79**
MCSAR*-80**
MCSAR*-81**
MCSAR*-82**
MCSAR*-83**
MCSAR*-84**
MCSAR*-85**
MCSAR*-86**
MCSAR*-87**
MCSAR*-88**
MCSAR*-89**
MCSAR*-90**
C Max.
3.070 [77.98]
3.120 [79.25]
3.170 [80.52]
3.220 [81.79]
3.270 [83.06]
3.320 [84.33]
3.370 [85.60]
3.420 [86.87]
3.470 [88.14]
3.520 [89.41]
3.570 [90.68]
3.620 [91.95]
3.670 [93.22]
3.720 [94.49]
3.770 [95.76]
3.820 [97.03]
3.870 [98.30]
3.920 [99.57]
3.970 [100.84]
4.020 [102.11]
4.070 [103.38]
4.120 [104.65]
4.170 [105.92]
4.220 [107.19]
4.270 [108.46]
4.320 [109.73]
4.370 [111.00]
4.420 [112.27]
4.470 [113.54]
4.520 [114.81]
Part No. By Size
MCSAR*-91**
MCSAR*-92**
MCSAR*-93**
MCSAR*-94**
MCSAR*-95**
MCSAR*-96*
MCSAR*-97**
MCSAR*-98**
MCSAR*-99**
MCSAR*-100**
MCSAR*-101**
MCSAR*-102**
MCSAR*-103**
MCSAR*-104**
MCSAR*-105**
MCSAR*-106**
MCSAR*-107**
MCSAR*-108**
MCSAR*-109**
MCSAR*-110**
MCSAR*-111**
MCSAR*-112**
MCSAR*-113**
MCSAR*-114**
MCSAR*-115**
MCSAR*-116**
MCSAR*-117**
MCSAR*-118**
MCSAR*-119**
MCSAR*-120**
C Max.
4.570 [116.08]
4.620 [117.35]
4.670 [118.62]
4.720 [119.89]
4.770 [121.16]
4.820 [122.43]
4.870 [123.70]
4.920 [124.97]
4.970 [126.24]
5.020 [127.51]
5.070 [128.78]
5.120 [130.05]
5.170 [131.32]
5.220 [132.59]
5.270 [133.86]
5.320 [135.13]
5.370 [136.40]
5.420 [137.67]
5.470 [138.94]
5.520 [140.21]
5.570 [141.48]
5.620 [142.75]
5.670 [144.02]
5.720 [145.29]
5.770 [146.56]
5.820 [147.83]
5.870 [149.10]
5.920 [150.37]
5.970 [151.64]
6.020 [152.91]
S — Solder pot for 26 AWG maximum stranded wire.
How To Specify
X — Special, does not fit description below.
MCS
AR
2
26
P
6
A
1
18.0
Lead Length in Inches (min.)
Connector Series
Insulator Type and Material
Insulation Color or Finish
AR — Polyphenylene Sulfide per MIL-M-24519
1 — All white wire
2 — All yellow wire
3 — All gray wire
or Liquid Crystal Polymer per ASTM D5138
Contact Locations
1 — Contact in every cavity
2 — Contact in every other cavity 1, 3, 5...
3 — Contact in every cavity except guide pin cavity in
each end cavity
4 — Contact in every other cavity 2, 4, 6... and
guide pin in each end cavity
X — Other than above
Standard Polarization
Guide pins are in socket connectors.
Blank cavities are in pin connectors.
Number of Cavities (120 Max.)
4 — Gold plated
5 — Tinned
6 — Bare (unfinished)
7 — Color coded per
MIL-STD-681, System 1
8 — Special color code
9 — Ten solid color repeating
(starts with black)
Wire Type
*A — Type E, 7 strand
*B — Type ET, 7 strand
*C — Type E, 19 strand
*D — Type ET, 19 strand
F — 7 strand per
MIL-22759/11
(#28 AWG only)
G — 19 strand per MIL-22759/11
26 AWG, 24 AWG
M — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Wire Size
4–24 AWG
5–25 AWG
6–26 AWG
8–28 AWG
0–30 AWG
Contact Type
P — Pin
S — Socket
50
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
High Density Standard Module (HDSM) Connectors
Features
n
n
n
n
n
n
n
n
n
n
n
n
Basic design offers 38, 78,
120, 152, 200, 304, and 400
contact designs
High reliability twist pin and
socket per MIL-DTL-83513
and MIL-DTL-55302
Connector permits lateral
movement of daughter
board to accommodate
clamping of the heatsink
Rectangular
Connectors
n
Designed for surface
mounting on both daughter
board and mother board for
increased circuit density
Plated through-hole
mounting available
Available with flying leads
Extender card option
available
Typical mating force for 304
contacts is 38 pounds
Designed to withstand vapor
phase soldering
Two rotatable (six position)
polarizing keys are provided
accommodating 36 possible
combinations
Jackscrew hardware
available; consult
Tyco Electronics
Different modular inserts
may be specified to include
coax (Pixi/Con), fiber optic
or other special contacts
Inserts may be partially or
fully loaded and installed in
the connector shell in
various configurations
The MICRODOT HDSM
connector is designed for
4 row .050 [1.27] pitch
density with a special low
force twist pin that meets
all requirements of MILDTL-55302 and MIL-DTL83513. This high density
connector allows the use of
construction to double the
packaging density with
surface mount capability.
2
Performance Data Summary
Electrical
Materials and Finishes
Contacts — Pin 24 AWG twist pin,
Socket #24 AWG, Wire range 24 AWG to
32 AWG solid and stranded.
Contact Resistance (voltage drop) —
25 millivolts max. at 3 amps, 25° ± 3° C.
Current Rating — 3 amps max. per
contact
Dielectric Withstanding Voltage —
Volts RMS 60 Hz at room ambient:
600 V for solder pots at sea level.
150 V for solder pots at 70,000 ft.
[21,336m]
500 V for wire terminations at sea level.
200 V for wire terminations at 70,000 ft.
Insulation Resistance — 5,000
megohms min. at room ambient.
Magnetic Permeability — 2 mµ max.
Contacts — Copper alloy plated with
.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Metal Shell —
Insulator — Liquid Crystal Polymer
(LCP) per ASTM D5138 or
Polyphenylene Sulfide per
MIL-M-24519
Body Shell — Aluminum alloy plated
Nickel, electroless per MIL-C-26074.
Mechanical
Contact Spacing — .050 [1.27] centers
Contact Engagement &
Separation — 5.0 oz max. [1.39N]
(eng.) 0.5 oz. min. [.14N] 3.5 oz. typ.
[.97N] (sep.) force.
Environmental
Temperature Range —
-67°F to 257°F [-55° C to +125° C].
Vibration — No discontinuity in
excess of 1 micro sec. when tested in
accordance with MIL-STD-1344,
Method 2005, test Condition IV.
Insulator Retention — Inserts will
withstand a 50 lb. per square inch load
in either direction.
Shock — No discontinuity in excess of
1 micro sec. when tested in accordance
with MIL-STD-1344, Method 2004, test
Condition E.
Durability — No mechanical or electrical defects detrimental to the function of
the connectors after 500 cycles of mating and unmating. (Caution: Mating
force increases during durability cycling
may be noted).
Humidity — After exposure to humidity as specified by MIL-STD-1344,
Method 1002, Type II, IR shall be 1
megohm min. immediately following
step 7a of Method 1002 and 1000
megohms min. after 24 hours of conditioning per Method 1002.
Salt Spray — Connectors shall meet
the performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subjected to the 48-hour 5% solution salt spray
test per MIL-STD-1344, Method 1001,
Condition B.
Crimp Termination Tensile
Strength — *Unassembled contacts
with crimped stranded wire terminations.
Wires will not pull out of contacts when
the following axial loads are applied:
24 AWG, 5 lbs., 26 AWG, 4 lbs.,
28 AWG, 3 lbs.
51
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
High Density Standard Module (HDSM) Connectors (Continued)
A
B
.025
Typ.
[0.64]
.050
Typ.
[1.27]
A
B
.050
[1.27]
.150
[3.81]
.050 Typ.
[1.27]
.360
[9.14]
38 & 78 Position Plug
120, 152 & 200 Position Plug
Mtg. Nut/Polarizing Key (Customer Installed)
2 Supplied (Packed Loose)
Socket Side
Flat Screw
2-56 UNC-2A
Thd.
Receptacle
Polarizing Key
2-56 UNC-2B
Thd.
Plug
Polarizing Key
2-56 UNC-2B
Thd.
Flat Screw
2-56 UNC-2A
Thd.
A
Pin Contact
A
A1
.290
[7.34]
.165
[4.19]
Pin Side
Keying Hardware
C Ref.
A15 (19) (25)
A16 (20) (26)
B16 (20) (26)
B15 (19) (25)
D
.050
.050
[.127]
[.127]
A30 (38) (50)
B30 (38) (50)
.025
A1
[0.64]
B1
A9 (19)
B10 (20)
}
End Cav. A1 Near Side
Marked As Shown
End Cav. D1 Far Side
Insulator
A
A1
.290
Ref.
[7.37]
.505
[12.83]
.350 Min.
[8.89] Ref.
Housing
Lead Organizer
.350
Min.
[8.89]
2-56 UNC-2B Thd.
x .125 [3.17] DP
28 AWG Wire
Solder Dipped
Ø.010 [0.25] (All Leads)
B1
Section A-A
.200
[5.08]
.300 .490
Max.
[7.62] [12.50]
C10 (20)
D9 (19)
C15 (19) (25)
C16 (20) (26)
C1 C30 (38) (50)
D1 D30 (38) (50)
C
D16 (20) (26)
C1
D1
D15 (19) (25)
C
(38 & 78)
(120, 152 & 200)
.025
Typ.
[0.64]
.050
Typ.
[1.27]
A
B
.050
[1.27]
2 Plcs.
.050
[1.27]
.150
[3.81]
.250
[6.35]
D
C
B
A
.360
[9.14]
Mtg. Nut/Polarizing Key
304 & 400 Position Plug
(Customer To Install)
2 Supplied (Packed Loose)
’A76’ (304) ’A100’ (400) Near Side Marking
’D76’ (304) ’D100’ (400) Far Side Marking
’A1’ Near Side Marking
’D1’ Far Side Marking
.290
.290
[7.34]
Ref.
[7.37]
A
D Ref.
CL
.125
Ref.
[3.18]
D75(99)
C75(99)
D76(100)
B76(100)
A58(76)
B58(76)
A59(77)
B59(77)
A57(75)
B57(75)
A56(74)
B56(74)
B39(51)
A39(51)
B40(52)
A40(52)
Standoff, 2-56 UNC-2B
Thd. x .125 [3.17] Min. Thd.
.250
[6.35]
B38(50)
A38(50)
B37(49)
A37(49)
A20(26)
B20(26)
A21(27)
B21(27)
A19(25)
B19(25)
A18(24)
B18(24)
Housing
Lead
Organizer
.165
[4.19]
.050 Ref.
[1.27]
C (2 Plcs.)
Insulator
.505
[12.83]
A1
A***
Pin Contact
A
2-56 UNC-2B Thd.
x .125 [3.17] DP
28 AWG Wire
Solder Dipped
fl.010 [0.25] (All Leads)
B3
A3
B4
A4
A2
B2
A1
B1
.060 Thick
[1.52]
.062
[1.58]
.350
[8.89]
Min.
Section A-A
.220
[5.59]
.590
.340 .460
Max.
[8.64] [11.68] [14.99]
C76(100)
D76(100)
C75(99)
D75(99)
.050
Typ.
[1.27]
.100
Typ.
[2.54]
C59(77)
D59(77)
C58(76)
D58(76)
.025
Typ.
[0.64]
.075
Typ.
[1.91]
C56(74) D40(52)
D56(74) C40(52)
C57(75) D39(51)
D57(75) C39(51)
D Typ.
.050
2 Plcs.
[1.27]
D37(49)
C37(49)
D38(50)
C38(50)
C21(27)
D21(27)
C20(26)
D20(26)
C18(24)
D18(24)
C19(25)
D19(25)
D4
C4
D3
C3
C1
D1
C2
D2
.100
[2.54]
Size 304 & 400 (Terminal Ident In Parentheses Is For Size 400)
52
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
High Density Standard Module (HDSM) Connectors (Continued)
C
D9(19)
C10(20)
B10(20)
A9(19)
.220
[5.59]
D1
C1
.226
Typ.
[5.74]
C
B1
A1
.195
[4.95]
B1
A1
(120, 152 & 200)
H Ref. Dim.
32 AWG,
Solder Dipped
G Gage Dim.
I.D. Of Bushing
Ø .132 Ø .062–.064
[3.35] [1.57–1.61]
Full Radius Typ.
.370
[9.40]
D Ref.
.050
[1.27]
B
A
.695
.545 [17.65]
[13.84]
.645
[16.38]
B
A
A9(38)A19(76)A30(120)
A38(152)A50(200) Near Side Marking
D9(38)D19(76)D30(120)
D38(152)D50(200) Far Side Marking
Section B-B
.025
[0.64] Typ.
.050 Typ.
[1.27]
A
B
38 & 78 Position Receptacle
CL Of Radius
Of Leads
.050 .188 ± .015
Typ.
[1.27] [4.78 ± 0.38]
.348
[8.84]
A1 Near Side Marking
D1 Far Side Marking
120, 152 & 200 Position Receptacle
Insulator
Section A-A
B
C
.195 Ref.
[4.95]
.025
Typ.
[0.64]
.150
[3.81]
.050
[1.27]
Housing
Socket
Contact
Polarizing Key, 2 Supplied
2-56 UNC-2B Thd.
(Packed Loose)
A
B
.050 Radius
[1.27] Typ.
“Break Away”
Notch
(All Leads)
CL Of
Mtg. Hole
Rectangular
Connectors
Torlon
Bushing
(4 Rqd)
Typ. At .545 [13.84] Dim.
C Ref.
.025
[0.64]
F Free State
Ø .008 M [.2.03] A M
.160
[4.06]
(38 & 78)
E
-A-
Flat Screw, 2 Supplied
2-56 UNC-2A Thd.
(Packed Loose)
D1
C1
D
2
Size 38 & 78
.050
[1.27]
D Typ.
.025
Typ.
[0.64]
.360
[9.14]
.050
[1.27]
.195
Ref.
[4.95]
C
B
Size 120, 152 & 200
Recommended PCB Footprint Pattern
Flat Head Screw (2 Plcs.)
2-56 UNC-2A Thd.
(Packed Loose, Customer To Install)
B
B/2 (2 Plcs.)
.360
[9.14]
C1
D1
H Ref. Dim.
G Gage Dim.
32 AWG,
Solder Dipped
F Free State
Ø .008 M [.2.03] A M
(Typ.) At .545 [13.84] Dim.
.025
Typ.
[0.64]
B
.250
[6.35]
.160
Typ.
[4.06]
Full
Radius
Typ.
C (2 Plcs.)
D (4 Plcs.)
.050
Typ.
[1.27]
A
.226
B1
A1
[5.74]
.370
[9.40]
.645
.545 [16.38] .695
[17.65]
[13.84]
B
A76(304) A100(400) Near Side Marking
D76(304) D100(400) Far Side Marking
.250
[6.35]
.050
[1.27]
2 Plcs.
A
.025
Typ.
[0.64]
.050 Radius
[1.27] Typ.
“Break Away”
Notch
(All Leads)
CL Of
Mtg. Hole
CL Of Radius
Of Leads
.050 .188 ± .015
Typ.
[1.27] [4.78 ± 0.38]
.348
[8.84]
A1 Near Side Marking
D1 Far Side Marking
Housing
Socket
Contact
.050
Typ.
[1.27]
Insulator
Section A-A
B
Polarizing Key (2 Plcs.)
(Packed Loose, Customer To Install)
B
A
.050
[1.27]
.150
[3.81]
.018
[0.46]
.035
[0.89]
1/2 B (2 Plcs.)
.195
[4.95]
D Typ.
2 Plcs.
C (2 Plcs.)
Size 304 & 400
Recommended PCB Footprint Pattern
53
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Rectangular Connectors
High Density Standard Module (HDSM) Connectors (Continued)
No. of Cavities
Single Bay
A Dim.
B Dim.
C Dim.
D Dim.
38
1.000
25.40
1.500
38.10
2.050
52.07
2.450
62.23
3.050
77.47
.840
21.34
1.340
34.04
1.890
48.01
2.290
58.17
2.890
73.41
.450
11.43
.950
24.13
1.500
38.10
1.900
48.26
2.500
63.50
—
.725
18.42
.925
23.50
1.225
31.12
4.600
116.84
5.800
147.32
4.440
112.78
5.640
143.26
1.900
48.26
2.500
63.50
.925
23.50
1.225
31.12
78
120
152
200
—
Double Bay
304
400
How To Specify
S — Solder pot
Z — Coke Bottle Termination (Receptacle only, see Table I)
ZA — 4 Row Wire Termination (Plug only)
ZB — 8 Row Wire Termination (Plug only)
X — Special Wire and/or other than above
HDSM
1
152
L
4
L
4
0.5
Connector Series
Contact Location
Wire Length
1 — Full complement of contacts
2 — Contacts in outside row only
3 — Contacts in inside row only
4 — Other than above or special housing
Wire Color/Finish
1 — All white
2 — All yellow
3 — All gray
Layout
4 — Gold plated
5 — Tin dipped gold plated
6 — Bare (unfinished)
7 — Color coded per MIL-STD-681,
System 1
8 — Special color code
9 — Ten basic color repeating on
each row (A, B, C, D)
(starting with black)
38, 78, 120, 152, 200, 304 & 400
Contact Type
Wire Type
L — Low Force Pin
SL — Low Force Socket
*A — Type E, 7 strand
*B — Type ET, 7 strand
*C — Type E, 19 strand
Wire Size
4—24 AWG
5—25 AWG
Table I
6—26 AWG
8—28 AWG
0—30 AWG
Dash No.
1
2
3
4
*D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(#28 AWG only)
G — 19 strand per MIL-W-22759/11
26 AWG, 24 AWG
L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Gap Between
Bushing "E"
.100
2.54
.093
2.36
.118
2.99
.145
3.68
F Dim.
G Dim.
.120
3.05
.060
1.52
.235
5.97
.120
3.05
.180
4.57
.150
3.81
.260
6.60
.180
4.57
H Dim.
(Ref.)
.330
8.38
.330
8.38
.483
12.27
.330
8.38
54
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Introduction
High Density Circular
Connectors
Product Facts
n
High density, light-weight
Multi-Pin Circular
Connectors feature a crimp
contact retention method,
requiring no insertion or
removal tools
n
Reverse gender available
n
Ideal for harsh environment
n
n
n
n
n
Unsealed — No grommet/
o-ring
Meets MIL Standards (high
quality) but is not QPL
qualified
Ideally suited to applications
where many conductors
must be accommodated in
a minimum of space with
minimum weight
MARC Series Connectors
are non-magnetic
Circular
Connectors
n
Sealed — Silicon rubber
grommet/o-ring
Contact rating 2.5A
Our high density, lightweight Multi-Pin Circular
Connectors are the
industry’s most advanced
and are ideally suited to
applications where many
conductors must be accommodated in a minimum of
space with minimum weight.
All series of connectors
feature a crimp contact
retention method, requiring
no insertion or removal tools.
The MARC 43 Series
Connectors conform to
applicable performance
requirements of MIL-C-26482
and has seen extensive
service on many leading
aerospace and ground support equipment programs.
The MARC 53 Series
Connectors, designed to
conform to the USAF high
reliability specification
MIL-C-38300, as offers
high density connector
performance. The positive
lock coupling mechanism,
combined with our exclusive floating interfacial seal,
offers outstanding performance under rigorous service
conditions.
The MARC 63 Series
Connectors, our Bayonet
Coupling Series, accommodates all insert patterns
and layouts available in the
MARC 43 Series Connectors,
MARC 53 Series Connectors,
and RMD Series Connectors.
All insert assemblies are
3
completely interchangeable. Lighter in weight and
smaller in size than any
comparable connector on
the market, it requires up
to 50% less engagement/
separation force. Conversion
to bayonet coupling shell
from MARC 43 Series
Connectors or MARC 53
Series Connectors is done
without tools by merely
transferring the contacts
and insert assemblies into
the MARC 63 Series
Connectors shell.
The newest addition to the
Multi-Pin product line is the
MARC 73 Series Connectors.
The twist pin Circular
Connector combines the
lightweight, bayonet
55
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Introduction (Continued)
coupling feature of the
MARC 63 Series Connectors
with the twist pin high density, center-to-center contact
spacing of 0.065 [1.65]
inch. The utilization of 22
AWG twist pin and socket
contacts provide for 50%
greater contact densities
SHM Receptacle
MARC 43 Series Connectors &
MARC 53 Series Connectors
than presently offered in the
MARC 43 Series Connectors,
MARC 53 Series Connectors,
or MARC 63 Series
Connectors.
Consult Tyco Electronics for
detailed information.
The MQR Series is a line of
circular quick disconnect
connectors for rugged
environmental use.
Mated MARC 53
Series Connectors
Mated MARC 63 Series Connectors
SHM Receptacle
MARC 43 Series Connectors &
MARC 53 Series Connectors
Mated MARC 43 Series Connectors
56
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 43 Series Connectors
A high density (.080 [2.03]
contact centers), lightweight,
subminiature, cylindrical
connector series featuring
crimp contacts and fingertip, push-pull, quick disconnect coupling. This series
conforms to the applicable
performance requirements
of MIL-C-26482 and is
available in unsealed,
environmentally sealed, and
hermetic types.
General Information
A large assortment in insert
arrangements — accommodating AWG 12 through 32
gauge wire and miniature
coaxial cables — is available
for the design engineer’s
choice. The contacts are
This proven series of connectors has a long history of
outstanding performance
connectors. Inserts are
molded from flame-resistant, glass-filled diallyl
phthalate, meeting ASTM
D5948 requirements. All
resilient parts are made of
high temperature, silicone
rubbers. Fuel resistant
compounds are used
where swelling affects the
performance of the
connector. All materials are
carefully selected for their
non-magnetic properties.
The standard finish is clear,
non-conductive anodize on
on many military and aerospace programs. MARC 43
Series Connectors are ideal
for applications where high
performance must be
achieved at low cost.
connector housings and
quick disconnect couplings.
For threaded coupling
applications, aluminum
components are hard, black
anodized, and stainless
steel plug coupling is
passivated with black oxide
finish. Conductive finish
modifications include gold,
cadmium, and iridite
finishes. Contacts are gold
plated per MIL-G-45204
requirements. See page 63
for modification information.
Circular
Connectors
MARC 43 Series Connector
housings and quick
disconnect couplings are
machined from bar stock
aluminum to combine maximum strength with minimum
weight. Threaded couplings
are machined from nonmagnetic, stainless steel
bar stock for durability of
the coupling threads.
Contacts are manufactured
from high conductivity
copper alloys which have
been selected for low
contact resistance over the
operating range of the
Materials and Finishes
retained by shoulder
entrapment and can be
crimped with the standard
M22520 tools, using appropriate locators.
3
Service and Performance Data
I. Electrical — Electrical Ratings
Current RatingDielectric
Contact
Amperes,
Size
Max., +27°C1
22 AWG
5 amps
16 AWG
20 amps
12 AWG
50 amps
50 ohm
3 amps
3 amps
75 ohm
95 ohm
3 amps
1
Withstanding
Voltage (RMS)
1000
1000
1000
1000
1250
1500
Working Voltage
Sea
70,000 ft.
Level
[21,336 m] Alt.
750
300
750
300
750
300
750
300
1000
300
1250
300
Consult nomograph.
II. Mechanical — Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
Shell
Size
A
B
C
Coupling/
Uncoupling
Force
(In-Lbs.) Max.
13 [57.8 N]
17 [75.6 N]
21 [93.4 N]
Contact
Size
Wire
Size
22
22, 24, 26
163
16, 18, 20
12
12 AWG
50 ohm
50 ohm
75 ohm
75 ohm
95 ohm
95 ohm
Conductor
Dia.
(Stranded)1
.019-.032
.482-.813
.038-.061
.965-1.55
.071-.093
1.80-2.36
.013 Max.
.330
.013 Max.
.330
.013 Max.
.330
Dielectric
Dia.
(Teflon)
Shield
Dia.
Jacket
Dia.2
—
—
—
—
—
—
.032-.036
.813-.914
.060-.066
1.52-1.68
.100-.104
2.54-2.64
.048-.054
1.22-1.37
.078-.084
1.98-2.13
.115-.123
2.92-3.12
.039-.054
.990-1.37
.065-.081
1.65-2.06
.096-.120
2.44-3.05
.065-.087
1.65-2.21
.096-.109
2.44-2.77
.137-.154
3.48-3.91
Tolerance of conductor diameters required for a reliable crimp. Smaller sizes
readily accommodated — consult Tyco Electronics.
Smaller jacketed cable can be accommodated but environmental seal may
be impaired. Smooth extruded jacket should be used for consistent wire
sealing.
3
Size 16 AWG Contact for size 20 AWG Wire – Use Tool 010-0080-0000.
1
Tightening Torque (In-Lbs.)
Retaining Nut
Mounting Nut
20, Max. [2.26 Nm]
20, Max. [2.26 Nm]
20, Max. [2.26 Nm]
30-45 [3.39 Nm – 5.08 Nm]
40-55 [4.52 Nm – 6.21 Nm]
55-70 [6.21 Nm – 7.91 Nm]
2
Operating Temperature: -85°F to 257°F [-65°C to +125°C].
57
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 43 Series Connectors (Continued)
Test Data
MARC 43 Series Connectors meet the applicable performance requirements of specification MIL-C-26482 (Navy) to
include the following selected test parameters listed below:
DESCRIPTION
MIL-C-26482 Test Para
TEST REQUIREMENTS
Insulation Resistance,
Room and High Temp.,
Para. 4.7.3
Insulation resistance of unmated connectors shall be 5000 megohms, minimum
at room temperature and 2000 megohms, minimum, at 257°F [+125°C]
when measured per MIL-STD-202, Method 302, Test Condition B.
Dielectric Withstanding Voltage,
Para. 4.7.4
No evidence of dielectric breakdown or flashover when mated and unmated
plugs are subjected to 1000 volts, rms, per MIL-STD-202, Method 301.
Durability,
Para. 4.7.9
Plugs and receptacles designed to withstand up to 500 cycles of engagement
and separation without detrimental electrical or mechanical damage to the
connectors.
Corrosion,
Para. 4.7.10
Unmated plugs and receptacles shall show no exposure of basis metal due
to corrosion which would affect electrical or mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere
per MIL-STD 202, Method 101.
Sweep Vibration,
Mated, Para. 4.7.11
Mated connectors shall show no circuit interruptions greater than 10 microseconds during 12 hours vibration to include six sweeps in two axes at
-67°F [-55°C], room temperature, and 257°F [+125°C] per MIL-STD-202, Method
204, Test Condition B. Post inspection shall show no detrimental cracking,
breaking, or loosening of parts.
Moisture Resistance,
Para. 4.7.13 and 4.7.13.1
The insulation resistance of mated connectors shall exceed 100 megohms
after subjection to moisture resistance testing per MIL-STD-202, Method 106.
Contact Retention,
Para. 4.7.16
Contacts shall withstand 15 lbs [66.7 N] axial load without axial displacement in
excess of 0.012 [0.305] or damage to contacts or inserts when the axial load is
applied to the mating end of the contacts in unmated plugs and receptacles
at a rate of approximately 1 lb/sec.
Contact Arrangements1
“A Size” Insert Layouts
(A = ) Shell Size 9
Insert Arrangement 2
Number of Contacts
Contact Size
-1
-2
19
7
50 Ohm 22 AWG
-5
2-22 AWG
2-50 Ohm
-11
-12
7
12
16 AWG 22 AWG
-14
7-22 AWG
2-50 Ohm
-17
4
16 AWG
-21
6-16 AWG
1-50 Ohm
“B Size” Insert Layouts
(B = ) Shell Size 12
Insert Arrangement 2
Number of Contacts
Contact Size
-9
-103
12
37
50 Ohm 22 AWG
-15
-19
13-22 AWG
12
6-50 Ohm 16 AWG
-34
-37
5
13-22 AWG
95 Ohm 6-12 AWG
-47
5
75 Ohm
-49
29-22 AWG
2-16 AWG
“C Size” Insert Layouts
(C = ) Shell Size 15
Insert Arrangement 2
Number of Contacts
Contact Size
-3
19
50 Ohm
Notes:
1
2
3
-4
61
22 AWG
-7
22-22 AWG
2-75 Ohm
-13
43-22 AWG
2-50 Ohm
-27
5-75 Ohm
4-95 Ohm
-48
12
75 Ohm
Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown.
Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings.
Arrangement also available in hermetic seal receptacles.
58
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 43 Series Connectors (Continued)
Part Number and Ordering
Information
ble to take advantage of our
“scoop-proof” design. (The
style—pin or socket—of a
coaxial contact refers to the
outer contact body.)
MARC 43 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization. Note: Pin or
socket (power or coaxial)
contacts may be used in
either plugs or receptacles.
However, it is recommended that pins be placed in
the receptacle when possi-
Typical Part Number
A
43
Supplemental Accessory
Hardware. We also manufacture supplemental accessory hardware (protective covers, cable clamps, etc.) to
adapt these connectors to
almost any application. For
modifications to fit
your requirements, contact
Tyco Electronics.
Alternate Keying. Standard
alternate polarizing key positions are shown below. Additional polarizing keyways are
available upon request.
E
H
14
P
Layout number
Denotes
Microdot
Series
P = Plug
PF = Plug, sq. flange mtg.
5
(***)
Polarizing
Position
N, 1, 2, 3, 4,
etc.
Modification
Designator
when
Applicable
(See Page 63)
PT = Plug, threaded cpl. ring
Circular
Size A
Size B
Size C
Unsealed A
Hermetic H
Sealed E
H = Receptacle, single hole mtg.
F = Receptacle, box mtg.
FT = Receptacle, box mtg.
(threaded coupl.)
J= Receptacle, line cord
S = Receptacle, solder mount
(Hermetic)
B = Receptacle, thru-bulkhead,
double end (Hermetic)
P = Pin (male) power contacts
Circular
Connectors
PP = Double end pins (type B only)
S = Socket (female) power
CP = Coaxial pin contact, or
combination of coaxial pin
and pin power contacts
Use one only
CS = Coaxial socket contact, or
combination of coaxial socket
and socket power contacts
Note: If P, S, CP, or CS does not appear in the numbering system,
no contacts will be supplied with order (order separately).
(1)
Polarizing Key Positions
All MARC 43 Series
Connector multi-pin plugs
and receptacles are available in alternate polarizing
positions as listed below:
Arrow ( ) indicates top
or vertical position (master
key-keyway) and coincides
with top or vertical position
of insert. This relationship
remains constant with alternate polarizing key positions.
Y
X
Receptacle
Plug
Size A
Part No.
A43****N
A43****-1
A43****-2
A43****-3
A43****-4
A43****-5
Size B
X°
130
130
90
210
130
90
Y°
110
150
110
110
35
230
3
Y
X
(1)
N—for Normal
(1)
Part No.
B43****N
B43****-1
B43****-2
B43****-3
B43****-4
B43****-5
B43****-6
B43****-7
B43****-8
B43****-9
B43****-10
Size C
X°
130
130
130
105
155
80
190
130
215
80
130
Y°
110
90
145
110
110
110
110
170
110
230
30
Part No.
C43****N
C43****-1
C43****-2
C43****-3
C43****-4
C43****-5
C43****-6
C43****-7
C43****-8
C43****-9
C43****-10
C43****11
C43****12
C43****13
C43****14
X°
130
130
130
130
190
150
90
70
70
90
210
30
250
130
30
Y°
110
90
150
170
110
110
110
110
230
230
110
110
30
30
230
59
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 43 Series Connectors (Continued)
Configurations
Type P
Straight Plug, Push-Pull
Coupling, Sealed or
Unsealed (Mates with
Receptacles, All Types)
A
1.266
[32.16]
B
Shell
Size
A
B
C
.175
[4.44]
Type PF
Dimensions
A
B
.766
1.578
40.08
19.46
1.656
.953
42.06
24.21
1.75
1.141
28.98
44.45
.062
[1.57]
Straight Plug, Square
Flange Mounting, Push-Pull
Coupling, Sealed or
Unsealed (Mates with
Receptacles, all Types.)
D
A Dia.
B Typ.
C Typ.
.110 – .130
p
yT
[2.79 – 3.30]
1.266
[32.16]
Shell
Size
A
B
C
.
Panel Cutout
Dimensions
A
.730
18.54
.920
23.37
1.110
28.19
B
.664
16.86
.786
19.96
.924
23.47
C
.875
22.23
1.000
25.40
1.125
28.58
Type PT
D
.750
19.05
.940
23.88
1.130
28.70
Master Keyway
Straight Plug, Threaded
Coupling, Sealed or
Unsealed (Mates with
Receptacles, Types H, HH,
and FT)
A
T Thread
1.500
Max.
[38.1]
Shell
Size
A
B
C
Lockwire Holes
A
.813
20.65
1.000
25.40
1.19
30.23
Dimensions
T (Class 2B)
5/8-32 UN
13/16-28 UN
1-28 UN
60
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 43 Series Connectors (Continued)
Configurations (Continued)
1.36
[34.54]
Type H
Receptacle, Single Hole
Mounting
Sealed or Unsealed
(Mates with Plugs, Types P,
PF and PT)
.065–.085
[1.65–2.16]
.080–.100
[2.03–2.54]
.125
[3.17]
A
Hex.
Master
Key
C
Hex.
D
E
T Thread
B
Hex.
Shell
Size
A
B
C
A
.75
19.05
.937
23.80
1.125
28.58
B
.687
17.45
.875
22.23
1.062
26.97
Panel Cutout
Dimensions
C
D
E
T (Class 2A)
.562
.607-.611
.625-.629
5/8-32 UN
15.8-15.97
14.27 15.42-15.52
.75
.794-.798
.812-.816
19.05 20.17-20.27 20.62-20.72 13/16-28 UN
.875
.975-.979
.999-1.003
1-28 UN
22.23 24.77-24.87 25.37-25.47
Circular
Connectors
.313 [7.95] max. panel for P & PF
.109 [2.77] max. panel. for PT
Type 43F
Receptacle, Box Mounting,
Sealed or Unsealed (Mates
with Plugs, Types P and PF)
1.36
[34.54]
.065–.085
[1.65–2.16]
Master Polarizing
Key
.052–.072
[2.03–2.54]
B
Typ.
Shell
Size
A
B
C
A
.875
22.23
1.000
25.40
1.125
28.58
Dimensions
B
.594
15.08
.786
19.96
.906
23.01
3
D
A
Typ.
C
Hex.
.110–.130 Dia.
[2.79–3.30] Typ.
C
.562
14.27
.75
19.05
.875
22.23
Panel Cutout
D
.595
15.11
.783
19.89
.960
24.38
Note: Unless otherwise shown, tolerances are: Decimals ±.015 [±.381], fractions ±1⁄32.
61
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 43 Series Connectors (Continued)
Configurations (Continued)
Type FT
Receptacle, Box Mounting,
Threaded Coupling, Sealed
or Unsealed (Mates with
Plugs, Types PT, P and PF)
.065–.085
[1.65–2.16]
1.36
[34.54]
Master Polarizing
Key
.052–.072
[2.03–2.54]
D
A
Typ.
C
Hex.
B
Typ.
T Thread
Shell
Size
A
B
C
A
.875
22.23
1.000
25.40
1.125
28.58
.110–.130 Dia.
[2.79–3.30] Typ.
Panel Cutout
Dimensions
C
T (Class 2A)
.562
5/8-32 UN
14.27
.75
13/16-28 UN
19.05
.875
1-28 UN
22.23
B
.594
15.08
.786
19.96
.906
23.01
D
.645
16.38
.832
21.13
1.020
25.90
Max. panel thickness is .125 [3.18].
Type J
A
Receptacle, Line Cord,
Sealed or Unsealed (Mates
with Plugs, Types P and PF)
B
C
Shell
Size
A
B
C
A
1.703
43.26
1.781
45.24
1.875
47.63
Dimensions
B
1.36
34.54
1.36
34.54
1.36
34.54
C
.766
19.46
.953
24.21
1.141
28.98
Note: Unless otherwise shown, tolerances are: Decimals ±.015 [±.381], fractions ±1⁄32.
62
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 43 Series Connectors (Continued)
Accessories
Cable Clamps
C
.156
[3.96]
B
B
D
.156
[3.96]
A
A
Straight
Shell Size
Part No.
A
086-0099-00X1
B
086-0100-00X1
C
086-0101-00X1
Right-Angle
A [Max.]
.704
17.88
.773
19.63
.829
21.05
B [Max.]
.750
19.05
.932
23.67
1.078
27.38
Contacts (see pages 78 and 79)
Part No.
A
086-0103-00X1
B
086-0104-00X1
C
086-0105-00X1
Pin Part No.
083-0009-00R4
083-0158-00R4
083-0173-00R4
Socket Part No.
082-0464-00Y9
082-0113-00T1
082-0132-00T1
084-0024-00T2
084-0027-00T2
141-1500-0001
142-1500-0001
084-0025-00T2
084-0026-00T2
084-0028-00T2
084-0029-00T2
Contact Size
22 AWG
16 AWG
12 AWG
50 ohm Coaxial
75 ohm Coaxial
95 ohm Coaxial
Sealed Connector
Part No.
086-0055-0000
086-0056-0000
086-0057-0000
086-0058-0000
086-0059-0000
086-0060-0000
C [Max.]
1.100
27.94
1.250
31.75
1.469
37.31
D [Max.]
.879
22.33
1.067
27.10
1.233
31.32
D
Receptacle Cover
Protective Covers
3
Plug Cover
Plug Cover Part No.1
With Chain
Without Chain
Receptacle Cover Part No.1
Without Chain
With Chain
Unsealed Connector
Part No.
086-0001-0000
086-0014-0000
086-0015-0000
086-0061-0000
086-0062-0000
086-0063-0000
C
B
1
B [Max.]
.600
15.24
.770
19.55
.962
24.43
Contact Cavity Sealing Plugs (see page 80)
A
Shell
Size
A [Max.]
.737
18.72
.913
23.19
1.048
26.62
Circular
Connectors
Contact Size
22 AWG
16 AWG
12 AWG
50 ohm Coaxial
(Solder Type)
50 ohm Coaxial
(Crimp Type)
75 ohm Coaxial
95 ohm Coaxial
Shell Size
A
086-0049-00J2
086-0073-00P1
086-0052-00J2
086-0076-00P1
B
086-0050-00J2
086-0074-00P1
086-0053-00J2
086-0077-00P1
C
086-0051-00J2
086-0075-00P1
086-0054-00J2
086-0078-00P1
A
.766
19.46
.953
24.21
1.141
28.98
Dimensions (Max.)
B
C
.950
.969
24.13
24.62
.950
1.156
24.13
29.36
.950
1.344
24.13
34.14
D
.913
23.19
.913
23.19
.913
23.19
For threaded plug (PT) and receptacle (FT) covers, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available,
consult Tyco Electronics.
Modifications
Standard modifications include:
The MARC 43 Series Connector modification identification system provides
alteration of standard MARC 43 Series
Connectors to include special finishes,
accessories, MARC 53 Series
Connector housings, and custom
quality assurance provisions —
processing, testing, serialization,
traceability. Consult your sales
representative or Tyco Electronics for
additional modification information.
(009): MARC 43 Series Connector,
anodized finish — black.
(048): MARC 43 Series Connector,
iridite finish — gold.
(056): MARC 43 Series Connector,
cadmium plated — clear.
(057): MARC 43 Series Connector
including cable clamp, straight
type.
(078): MARC 43 Series Connector
insert arrangement plus
MARC 53 Series Connector
positive lock coupling.
(094): MARC 43 Series Connector
coaxial insert arrangement to
include all-crimp coaxial contacts
plus MARC 53 Series Connector
positive lock coupling.
(098): MARC 43 Series Connector
connector including cable
clamp, right-angle type.
63
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors
General Information
The MARC 53 Series
Connector family represents
a major advancement in the
design of high density (.080
[2.03] contact centers), subminiature, power and coaxial contact connectors. The
MARC 53 Series Connectors
consists of two connector
styles — the Military
approved MD53 featuring
shoulder entrapped contacts, and the new RMD53
utilizing rear insertable/
removable contacts.
MARC 53 Series Connectors
combine positive lock —
the rugged, push-pull, lockcoupling mechanism — with
the unique positive seal
multiple sealing system.
Positive lock is our new finger-tip, push-pull coupling
with the safety lock feature,
and is the only connector
made with positive “blind
mating” indication. When the
plug is fully engaged, the
coupling ring can be rotated
45° to the safety lock
position; if the plug is not
completely engaged, the
coupling ring cannot be
turned to the safety lock
position. Consequently,
under “blindmating” conditions, it is always possible
to determine if the plug is
properly engaged without
visual reference, damage, or
accidental disengagement.
The environmental integrity
is guaranteed by multiple
seal construction using silicone rubber “0” rings and a
floating, voidless insert construction. The floating insert
design allows the inserts to
move within the connector
housing to control interfacial
sealing pressure in spite of
tolerance accumulation, and
a compression interfacial
seal with minimum engaging
force. Both the primary “0”
ring system and the continuous dielectric construction
withstand the MIL-C-38300A
altitude breathing test. The
sealing system meets the
air leakage requirements of
not more than 1 cubic inch
of air per hour at a 30 P.S.l.
pressure differential. This
redundant sealing method
is indicative of the inherent
reliability built into our
connectors.
MARC 53 Series Connector
power contacts are manufactured from high grade
copper alloys, and are
designed to be crimped
with standard M22520
tooling using subminiature
contact locators.
MARC 53 Series Connectors
incorporate hard insulators
in both the plug and receptacle inserts for exceptional
contact stability. Shoulder
entrapment positively
retains the front insertable
MD53 contacts between
the front and rear insulators.
The new RMD53 contacts
are rear insertable and
removable and are retained
within the connector insulators by clips which can be
visually inspected. No insertion or extraction tools are
MD53
shoulder entrapped contacts
required for either the MD53
or RMD53 contacts using
nominal size wire.
MARC 53 Series Connectors
are truly field serviceable…
no special tools are required
for maintainability. In addition, connector subcomponents damaged through
handling or misuse can
be procured separately
generally without the need
to scrap entire connector
units.
Weight reductions as high
as 67% are achieved without loss of performance.
MARC 53 Series Connectors
are available in both environmental and hermetic styles.
In addition to the positive
lock plug, a threaded coupling plug is also available.
Part numbers for configurations offering various finishes
and accessories plus other
design variations to satisfy
special requirements are
also available.
RMD53
rear insertable contacts
Materials and Finishes
Housings and quick disconnect couplings are machined
from bar stock aluminum to
combine maximum strength
with minimum weight.
Threaded couplings are
machined from non-magnetic, stainless steel bar
stock for durability of the
coupling threads. Contacts
are manufactured from high
conductivity copper alloys
which have been selected
for low contact resistance
over the operating range of
the connectors. Inserts are
molded from flame-resistant,
glass-filled diallyl phthalate,
meeting ASTM D5948
requirements. All resilient
parts are made of hightemperature, silicone
elastomers. Fuel resistant
compounds are used
where swelling affects the
performance of the
connector. All materials are
selected for their nonmagnetic properties.
The standard finish is hard
black, non-conductive,
anodized finish on connector
housings and quick disconnect couplings; stainless
steel threaded coupling is
passivated with black oxide
finish. Conductive finish
modifications include gold
finish and electroless nickel
finish. Multi-finish modifications for connector plugs
include black anodized
disconnect coupling with
conductive finish on shell
grounding members.
Contacts are gold plated
per MIL-G-45204 requirements. See Page 73 for
modification information.
64
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Service and Performance
Data
I. Electrical — Electrical Ratings
1
Contact
Size
Current Rating
(Amperes,
Max., 81°F [+27°C])
Dielectric
Withstanding
Voltage (RMS)
22 AWG
16 AWG
5
20
1000
1000
Working Voltage
110,0001
Sea
Ft. Alt.
Level
750
300
750
300
Contact
Resistance
(Millivolts, Max.)
15
20
10,000 ft equals 33,528 m altitude.
Wire Sizes Accommodated
Cond. Dia.
(Stranded)1
.019-.032
[.483-.813]
.038-.061
[.965-1.55]
Contact
Size
22 AWG
16 AWG
Jacket
Size2
.039-.054
[.991-1.37]
065-.081
[1.65-2.05]
Tolerance of conductor diameters required for a reliable crimp. Smaller sizes
readily accommodated — consult Tyco Electronics.
2
Smaller jacketed cable can be accommodated but environmental seal
may be impaired. Smooth extruded jacket should be used for consistent
wire sealing.
1
Insulation Resistance: 5000 megohms, minimum, at room ambient conditions.
II. Mechanical — Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
9
12
15
18
Coupling/
Uncoupling
Force
(In-Lbs.) Max.
18 [80.07 N]
22 [97.86 N]
27 [120.10 N]
32 [142.34 N]
Tightening Torque (In-Lbs.)
Retaining Nut
Mounting Nut
20 [2.26 Nm], Max.
20 [2.26 Nm], Max.
20 [2.26 Nm], Max.
20 [2.26 Nm], Max.
Circular
Connectors
Shell
Size
30-45 [3.39 – 5.08 Nm]
40-55 [4.52 – 6.21 Nm]
55-70 [6.21 – 7.91 Nm]
70-85 [7.91 – 9.60 Nm]
Operating Temperature: -67°F to 257°F [-55°C to +125°C]
Connector Mated Length: MD Plug (06) mated to MD Receptacles (00) (01)
(02) (12): 2.031 [51.58], max. RMD Plug (06) mated to RMD Receptacles:
2.217 [56.31], max.
3
65
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Test Data
MARC 53 Series Connectors exceed the requirements of specification MIL-C-38300A (USAF) as detailed in the applicable
M38300A (USAF) military specification sheets.
MARC 53 Series Connectors meet the following selected test parameters as specified below:
DESCRIPTION
MIL-C-38300 Test Para
TEST REQUIREMENTS
Contact Retention
Para. 4.10.3
MD Contacts shall withstand 15 lbs [66.72 N] axial load and RMD contacts
10 lbs [44.48 N] axial load without axial displacement in excess of 0.012 [.305]
or damage to contacts or inserts when the axial load is applied to the mating
end of the contacts in unmated plugs and receptacles at a rate of approximately
1 lb/sec. [4.45 N].
Contact Resistance
Para. 4.10.8
The potential drop across normally mated contacts shall not exceed 25 mv
under room ambient and high temperature service conditions when measured
as specified in MIL-C-26636, Fig. 2, with maximum rated current.
Dielectric Withstanding Voltage,
Altitude and Sea Level
Para. 4.10.10
No evidence of dielectric breakdown or flashover when mated and unmated
plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
110,000 feet [33,528 m] and 1000 volts RMS at sea level.
Insulation Resistance,
Room and High Temp.
Para. 4.10.13 and 4.10.13.1
Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
minimum, at room temperature and 1000 megohms, minimum, at 257°F
[+125°C] when measured per MIL-STD-202, Method 302, Test Condition B.
Coupling and Uncoupling
Para. 4.11.3
Plugs and receptacles shall withstand up to 500 cycles of engagement and
separation (locking mechanism actuated with each cycle) without detrimental
damage to plugs or receptacles or not satisfying subsequent tests of MIL-C-38300.
Fluid Immersion
Para. 4.11.5
Mating and unmating forces shall not exceed 27 Ibs, [120.10 N] maximum,
(15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated
Para. 4.11.6
Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme
temperatures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202, Method
204, Test Condition D. Post inspection shall show no detrimental cracking,
breaking, or loosening of parts.
Moisture Resistance
Para. 4.11.8
The insulation resistance of mated connectors shall exceed 1000 megohms
after subjection to moisture resistance testing per MIL-STD-202, Method 106, as
amended by MIL-C-38300.
Altitude Breathing
Para. 4.11.12
The insulation resistance of wired and mated connectors shall be 5000
megohms, minimum, and there shall be no flashover or breakdown at a test
voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt
water solution at 68°F [20°C] and room ambient pressure pressure at 68°F
[20°C].
Salt Spray
Para. 4.11.13
Unmated plugs and receptacles shall show no excessive corrosion which
would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere per
MlL-STD-202, Method 101.
66
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Contact Arrangements 1,2
Shell Size 9
Shell Size 12
Shell Size 15
Shell Size 186
Insert Arrangement 3
Number of Contacts
Contact Size
9-19 4,5
19
22 AWG
12-37 4,5
37
22 AWG
15-31 5
31
16 AWG
18-91 4,5
91
22 AWG
Shell Size 15
Shell Size 15
Shell Size 15
15-61 4,5
61
22 AWG
15-55
55
22-20 AWG
15-43
1-95 ohm
42-22 AWG
Shell Size 9
Insert Arrangement 3
Number of Contacts
Contact Size
9-7 5
7
16 AWG
Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown.
In addition to those inserts shown, MARC 43 Series Connector inserts may be utilized in MARC 53 Series Connector
housings. See page 63, MARC 43 Series Connector modifications.
3
Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings.
4
Arrangement also available in RMD style.
5
Arrangement also available in hermetic seal receptacles.
6
Arrangement available in 06, 00, 01.
1
2
Circular
Connectors
Part Number and
Ordering Information
MARC 53 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization.
Typical Part Number
Note: Pin or socket (power
or coaxial) contacts may be
used in either plugs or
receptacles. However, it is
recommended that pins be
placed in the receptacles
when possible to take
advantage of our “scoopproof” design.
MD53
06
facture supplemental accessory hardware (protective
covers, shield adapters,
etc.) to adapt these connectors to almost any application. For modifications to fit
your requirements, contact
Tyco Electronics.
Alternate Keying — Standard
alternate polarizing key
positions are shown below.
Additional polarizing keyways are available upon
request.
Supplemental Accessory
Hardware — We also manu-
E
15
61
S
N
3
(***)
Modification
Designator
when applicable
(See page 73)
Series — MD53
or RMD53 style
Single hole mntng.
receptacle
00
Polarizing position
N, 1, 2, 3, 4, etc.
Line cord recept.
01
P — Pin, Power Pin, Coaxial Pin
S — Socket, Power Socket, Coaxial Socket
Box mntng. recpt.
02
Straight plug,
positive lock quick
disconnect
06
Box mntng. recept., thd
12
Straight plug,
threaded coupling
16
NOTE: If P or S does not appear in the
numbering system, no contacts will be
supplied with order (order separately)
Insert arrangement number
Shell Size — O.D. of receptacle
barrel to nearest .063 [1.60]
E — Environmentally sealed
H — Hermetic seal (receptacle only).
67
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Polarizing Key Positions
(1)
(1)
All of our multi-pin plugs
and receptacles are available in alternate polarizing
positions as listed below:
Y
Y
X
X
Plug
(Shell sizes 9, 12, 15 only)
Shell Size 9
Part No.
(R) MD53-***9-***-N
(R) MD53-***9-***-1
(R) MD53-***9-***-2
(R) MD53-***9-***-3
(R) MD53-***9-***-4
(R) MD53-***9-***-5
X°
130
130
90
210
130
90
Receptacle
(Shell sizes 9, 12, 15 only)
Shell Size 12
X°
Part No.
(R) MD53-***12-***-N 130
(R) MD53-***12-***-1 130
(R) MD53-***12-***-2 130
(R) MD53-***12-***-3 105
(R) MD53-***12-***-4 155
(R) MD53-***12-***-5 80
(R) MD53-***12-***-6 190
(R) MD53-***12-***-7 130
(R) MD53-***12-***-8 215
(R) MD53-***12-***-9 80
(R) MD53-***12-***-10 130
Y°
110
150
110
110
35
230
Y°
110
90
145
110
110
110
110
170
110
230
30
Shell Size 15
Part No.
X°
(R) MD53-***15-***-N 130
(R) MD53-***15-***-1 130
(R) MD53-***15-***-2 130
(R) MD53-***15-***-3 130
(R) MD53-***15-***-4 190
(R) MD53-***15-***-5 150
(R) MD53-***15-***-6 90
(R) MD53-***15-***-7 70
(R) MD53-***15-***-8 70
(R) MD53-***15-***-9 90
(R) MD53-***15-***-10 210
(R) MD53-***15-***-11 30
(R) MD53-***15-***-12 250
(R) MD53-***15-***-13 130
(R) MD53-***15-***-14 30
Y°
110
90
150
170
110
110
110
110
230
230
110
110
30
30
230
(1)
(1)
A
A
E
B
B
E
C
C
D
D
Plug
(Shell size 18 only)
Part No.
(R) MD53-***18-***-N
(R) MD53-***18-***-1
(R) MD53-***18-***-2
(R) MD53-***18-***-3
(R) MD53-***18-***-4
(R) MD53-***18-***-5
(R) MD53-***18-***-6
(R) MD53-***18-***-7
(R) MD53-***18-***-8
(R) MD53-***18-***-9
(R) MD53-***18-***-10
Receptacle
(Shell size 18 only)
Shell Size 18
B°
A°
60
130
70
130
55
130
50
130
125
75
80
150
50
90
120
70
130
70
35
90
140
75
C°
185
205
210
190
190
205
175
175
205
130
210
D°
250
270
250
235
250
250
250
250
260
215
250
E°
325
320
310
305
320
300
315
295
325
285
310
Arrow ( ) indicates top or vertical position (master key/keyway) and coincides with top or vertical position of insert
shown on page 59. This relationship remains constant with alternate polarizing key positions.
(R) Rear insertable and removable.
(1)
68
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Master Keyway
Configurations
MD53-06E/RMD53-06E
A
Straight Plug, positive lock
Coupling, Environmental
(Mates with Receptacles,
All Types)
B
C
.093 Max.,
[2.36] RMD only
Shell
Size
9
12
15
18
Dimensions
B (Max.)
1.000
25.4
1.000
25.4
1.000
25.4
1.000
25.4
A
.890
22.60
1.078
27.38
1.262
32.05
1.577
40.06
C (Max.)
1.281
32.54
1.281
32.54
1.281
32.54
1.281
32.54
Circular
Connectors
MD53-16E/RMD53-16E
Master
Keyway
Straight Plug, Threaded
Coupling, Environmental
(Mates with Receptacles,
Types 00 and 12; Not available in 18 Shell Size)
A
B
C
Lockwire
Holes
3
T Thread
.093 Max.,
[2.36] RMD only
Shell
Size
9
12
15
18
A
.812
20.62
1.000
25.4
1.187
30.15
1.437
36.50
B (Max.)
1.125
28.57
1.125
28.57
1.125
28.57
1.125
28.57
Dimensions
C (Max.)
1.500
38.1
1.500
38.1
1.500
38.1
1.437
36.50
T (Class 2B)
5/8-32UN
13/16-28UN
1-28UN
1-1⁄4-28UN
69
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Configurations (Continued)
C
.065–.085
[1.65–2.16]
.125
[3.18]
G
.080–.100
[2.03–2.54]
MD53-00E/RMD53-00E
Receptacle, Single Hole
Mounting, Environmental
(Mates with Plugs, Type 06
and 16)
Master
Key
A
Hex.
E
D
F
Hex.
Panel Cutout
B
Hex.
T Thread
.093 Max.,
[2.36] RMD Only
Shell
Size
9
12
15
18
A
.75
19.05
.937
23.80
1.125
28.58
1.625
41.28
B
.687
17.45
.875
22.23
1.062
26.97
1.375
34.93
C
1.360
34.54
1.360
34.54
1.360
34.54
1.360
34.54
D
.607-.611
15.42-15.52
.794-.798
20.17-20.27
.975-.979
24.76-24.86
1.214-1.218
30.83-30.94
Dimensions
E
.625-.629
15.87-15.97
.812-.816
20.62-20.73
.999-1.003
25.37-25.48
1.251-1.255
31.77-31.87
F
.563
14.30
.75
19.05
.875
22.23
1.125
28.58
G
.090
2.29
.090
2.29
.090
2.29
.125
3.18
T (Class 2A)
5/8-32NS
13/16-28NS
1-28UNS
1-1/4-28UN
Note: .313 [7.95] Maximum Panel Thickness when mated with a positive lock 06 Plug.
.109 [2.77] Maximum Panel Thickness when mated with threaded 16 Plug.
MD53-01E/RMD53-01E
Master
Key
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
C
Hex.
B
A
.093 Max.,
[2.36] RMD only
Shell
Size
9
12
15
18
A (Max.)
1.360
34.54
1.360
34.54
1.360
34.54
1.360
34.54
Dimensions
B (Max.)
.766
19.46
.953
24.21
1.141
28.98
1.578
40.08
C
.562
14.27
.75
19.05
.875
22.23
1.125
28.58
Note: Unless otherwise shown, tolerances are: decimals ± .015 [±.381]; fractions ± 1⁄32.
70
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Configurations (Continued)
.065–.085
[1.65–2.16]
MD53-02E/RMD53-02E
Receptacle, Box Mounting,
Environmental (Mates with
Plug, Type 06)
1.36
[34.54]
Master Polarizing
Key
.052–.072
[1.32–1.80]
D
A
Typ.
C
Hex.
.093
Max. RMD only
[2.36]
.110–.130 Dia.
[2.79–3.30] Typ.
B
Typ.
Panel Cutout
.375 [9.53] Max. Panel Thickness for
rear-mount applications.
Shell
Size
9
12
15
18
.065–.085
[1.65–2.16]
Receptacle, Box Mounting,
Environmental (Mates with
Plugs, Type 06 and 16; not
available in 18 Shell Size)
D
.595
15.11
.783
19.89
.960
24.38
1.212
30.78
Circular
Connectors
MD53-12E/RMD53-12E
Threaded Coupling
Dimensions
B
C
.594
.563
15.09
14.30
.786
.75
19.96
19.05
.875
.906
23.01
22.23
1.062
1.125
26.97
28.58
A
.875
22.23
1.000
25.40
1.125
28.58
1.344
34.14
1.36
[34.54]
Master Polarizing
Key
.052–.072
[1.32–1.80]
D
A
Typ.
C
Hex.
T Thread
3
.110–.130 Dia.
[2.79–3.30] Typ.
B
Typ.
.093
Max. RMD only
[2.36]
Panel Cutout
.125 [3.18] Max. Panel Thickness
when mated with threaded 16 Plug
for rear mount applications.
Shell
Size
9
12
15
A
.875
22.23
1.000
25.40
1.125
28.58
B
.594
15.09
.786
19.96
.906
23.01
Dimensions
C
T (Class 2A)
.563
5/8-32UN
14.30
.75
13/16-28UN
19.05
.875
1-28UN
22.23
D
.645
16.38
.832
21.13
1.020
25.91
Note: Unless otherwise shown, tolerances are: decimals ± .015 [±.381]; fractions ± 1⁄32.
71
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Accessories
Test Adapter
The test adapter accessory
is utilized primarily as a connector simulator to preserve
the end-use connector
where this connector would
be subjected to extensive
testing, matings, or probings.
The test adapter, when
mated, provides the exact
mating interface as that of
the end-use connector and is
completely field serviceable.
Test Adapter Product
Part Number System
How to Specify
T
53
E
15
61
SP
N
(XXX)
Modification Designator
Polarizing Position
Contact Sex
SP — Sockets Plug end, Pins Receptacle end
PS — Pins Plug end, Sockets Receptacle end
Layout
Shell Size
Adapter Type
E — Sealed
A — Unsealed
Series or Style
53 — MARC 53 Series Connector
63 — MARC 63 Series Connector
Test Adapter
Dimension
A (Max.)
B (Max.)
.906
2.670
23.01
67.82
1.094
2.670
27.79
67.82
1.281
2.670
32.54
67.82
1.594
2.670
40.49
67.82
Shell
Size
9
12
15
18
B
A
Dia.
C
A
D
B
Receptacle Cover
Plug Cover
Protective Covers
Shell
Size
1
Receptacle Cover Part No.1
With Chain
Without Chain
Plug Cover Part No.1
With Chain
Without Chain
9
086-0049-00AL
086-0073-00W3
086-0052-00L6
086-0076-00P2
12
086-0050-00AL
086-0074-00W3
086-0053-00L6
086-0077-00P2
15
086-0051-00AL
086-0075-00W3
086-0054-00L6
086-0078-00P2
18
086-0146-00AL
086-0139-00W3
086-0147-00L6
086-0140-00P2
A
.766
19.46
.953
24.21
1.141
28.98
1.578
40.08
Dimensions (Max.)
B
C
.969
.950
24.13
24.61
.950
1.156
29.36
24.13
.950
1.344
24.13
34.14
1.000
1.781
25.4
45.24
D
.913
23.19
.913
23.19
.913
23.19
.913
23.19
For threaded plug (PT) cover, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics.
72
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 53 Series Connectors (Continued)
Accessories (Continued)
T
Cable Clamps
Shell
Size
9
12
15
18
.156
[3.96]
Clamp Part No.
RMD
MD
A
.704
086-0099-00F5 086-0175-00F3 17.88
086-0100-00F5 086-0176-00F3 .773
19.63
086-0101-00F5 086-0177-00F3 .829
21.06
086-0142-00F5 086-0178-00F3 .890
22.61
Shell
Size
MD
Clamp Part No.
RMD
.750
19.05 1/2-20 UNF
.932
UNEF
23.67 11/16-24
1.078
27.38 13/16-24 UNEF
1.250
1-28 UN
31.75
A
9
086-0103-00F5
086-0179-00F3
12
086-0104-00F5
086-0180-00F3
15
086-0105-00F5
086-0181-00F3
18
086-0143-00F5
086-0182-00F3
T
Thd. 2A
B
B
A
Straight
B (Max.) C (Max.)
.600
15.24
.775
19.68
.962
24.43
1.185
30.01
.737
18.72
.913
23.19
1.048
26.62
1.225
31.12
1.100
27.94
1.250
31.75
1.469
37.31
1.550
39.37
C
T
Thd. 2A
D
.879
1/2-20 UNF
22.32
1.067
27.10 11/16-24 UNEF
1.233
31.32 13/16-20 UNEF
1.550
1-28 UN
39.37
.156
[3.96]
B
D
T
A
Right-Angle
Circular
Connectors
Contacts (see pages 78 and 79)
Contact
Size
22 AWG
16 AWG
Pin Part No.
MD
RMD
083-0009-00R4
083-1200-00R4
—
083-0158-00R4
Socket Part No.
MD
RMD
082-0464-00Y9
082-0462-00Y9
082-0113-00T1
—
Note: Standard packaging includes same quantity of contacts as contact cavities in insert.
Contact Cavity Sealing Plugs (see page 80)
Contact
Size
22 AWG
16 AWG
Standard Length Part No.
MD
RMD
086-0055-0000
086-0148-0000
—
086-0056-0000
Short Length Part No.
MD
RMD
082-0009-0000
086-0009-0000
082-0010-0000
—
3
Note: Standard length plug occupies contact cavity and wire sealing grommet. Short length
plug occupies wire sealing grommet only (to be used behind non-wired contacts and
in plugs which mate to hermetic receptacles).
Modifications
We offer a unique modification identification system
which provides alteration of
standard MARC 53 Series
Connectors to include special finishes, accessories,
MARC 43 Series Connector
contact arrangements, and
custom quality assurance
provisions — processing,
testing, serialization,
traceability. Consult
Tyco Electronics for additional modification information.
Standard modifications
include:
(503): MARC 53 Series
Connector including
cable clamp, straight
type
(504): MARC 53 Series
Connector including
cable clamp, rightangle type
(507): MARC 53 Series
Connector, electroless nickel finish
(508): MARC 53 Series
Connector, black
anodized coupling
ring, gold over electroless nickel housings, retaining nuts
and hardware.
(506): MARC 53 Series
Connector, gold finish
73
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 63 Series Connectors
MARC 63 Series Connectors RMD63 Performance Data
MARC 63 Series Connectors,0 RMD63 Series meet or exceed the performance requirements of specification MIL-C38300A (USAF) as detailed in the M38300A (USAF) military specification sheets covering the MARC 53 Series
Connectors. Tyco Electronics can supply detailed, cross reference information. MARC 63 Series Connectors, RMD63
Series meet the following selected test parameters as specified below:
DESCRIPTION
TEST REQUIREMENTS
Contact Retention
Contacts are to withstand 15 lbs. [66.72 N] axial load and RMD contacts 10 lbs.
[44.48 N] axial load without axial displacement in excess of 0.012 [.305] or
damage to contacts or inserts when the axial load is applied to the mating end
of the contacts in unmated plugs and receptacles at a rate of approximately
1 lb/sec. [4.45 N].
Contact Resistance
The potential drop across normally mated contacts shall not exceed 25 mv
under room ambient and high temperature service conditions when measured
as specified in MIL-C-26636, Fig. 2, with maximum rated current.
Dielectric Withstanding Voltage,
Altitude and Sea Level
No evidence of dielectric breakdown or flashover when mated and unmated
plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
110,000 [33,528 m] feet and 1000 volts RMS at sea level.
Insulation Resistance,
Room and High Temp.
Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
minimum, at room temperature and 1000 megohms, minimum, at 257°F
[+125°C] when measured per MIL-STD-202, Method 302, Test Condition B.
Coupling and Uncoupling
Plugs and receptacles shall withstand up to 500 cycles of engagement and
separation without detrimental damage to plugs or receptacles or not satisfying
subsequent tests of MIL-C-38300.
Fluid Immersion
Mating and unmating forces shall not exceed 27 lbs. [120.10 N], maximum,
(15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated
Mated connectors shall show no circuit interruptions greater than one
microsecond during 12 hours vibration to include six sweeps in each axis at
extreme temperatures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202,
Method 204, Test Condition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts.
Moisture Resistance
The insulation resistance of mated connectors shall exceed 1000 megohms after
subjection to moisture resistance testing per MIL-STD-202, Method 106, as
amended by MIL-C-38300.
Altitude Breathing
The insulation resistance of wired and mated connectors shall be 5000
megohms, minimum, and there shall be no flashover or breakdown at test voltage
of 1000 volts RMS after the third cycle and while immersed in 5% salt water
solution at 68°F [20°C] and room ambient pressure at 68°F [20°C].
Salt Spray
Unmated plugs and receptacles shall show no excessive corrosion which
would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere per
MIL-STD-202, Method 101.
74
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 63 Series Connectors (Continued)
Part Number and Ordering
Information
Connector part numbers
indicate size, shape, insert
layout, type of seal, style of
contact and polarization.
Note: Pin or socket (power or coaxial)
contacts may be used in either plugs
or receptacles. However, it is recommended that pins be placed in the
receptacle when possible to take
advantage of our “scoop-proof”
design.
Typical Part Number
06
MD63
E
15
61
S
N
(***)
Modification
Designator
when applicable
(See page 77)
Series — MD63
or RMD63 style
Single hole mntng.
receptacle
00
Line cord recept.
01
Box mntng. recpt.
02
Straight plug, bayonet
quick disconnect
Polarizing position (1)
N, 1, 2, 3, 4, etc. . . .
P — Pin power contact
S — Socket power contact
Insert arrangement number (2)
Shell Size — O.D. of receptacle barrel to nearest 1/16 inch
06
E — Environmentally sealed
H — Hermetic seal (receptacle only).
Circular
Connectors
(1) For polarizing key positions see MARC 53 Series Connectors.
(2) For contact arrangements see MARC 53 Series Connectors.
Note: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately).
Configurations
MD63-06E/RMD63-06E
Master Polarizing
Keyway
Straight Plug, Bayonet
Coupling, Environmental
and Non-Environmental
(Mates with Receptacles
02, 00 and 01)
3
A
B
C
Shell
Size
9
12
15
18
A
.813
20.65
1.000
25.40
1.125
28.58
1.594
40.49
Dimensions
B (Max.)
1.000
25.4
1.000
25.4
1.000
25.4
1.000
25.4
.093 Max.
[2.36]
C (Max.)
1.288
32.72
1.288
32.72
1.288
32.72
1.288
32.72
75
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 63 Series Connectors (Continued)
Configurations (Continued)
.110–.130 Dia.
[2.79–3.302] 4 Holes
Master Polarizing
Key
MD63-02E/RMD63-02E
Receptacle, Box Mounting,
Environmental and NonEnvironmental (Mates with
Plug, Type 06)
C
Hex.
B
Typ.
.093 Max.
[2.36]
A
Typ.
.065–.085
[1.65–2.16]
Panel Cutout
.375 [9.53] Max. Panel Thickness
for rear mount applications.
1.360
[34.54]
Shell
Size
A
.875
22.23
1.000
25.40
1.125
28.58
1.344
34.14
9
12
15
18
MD63-00E/RMD63-00E
B
.662
16.81
.786
19.96
.906
23.01
1.062
26.97
Dimensions
C
.562
14.27
.75
19.05
.875
22.23
1.125
28.58
B
Hex.
F
Hex.
A
Hex.
T
Thread
Shell
Size
9
12
15
18
A
.813
20.65
1.000
25.40
1.125
28.58
1.625
41.28
B
.75
19.05
.937
23.80
1.062
26.97
1.375
34.93
D
.693-.697
17.60-17.70
.881-.885
22.38-22.48
1.006-1.011
25.55-25.68
1.250-1.260
30.48-32.00
.125
[3.18]
Master Polarizing
Key
Receptacle, Single Hole
Mounting, Environmental
and Non-Environmental
(Mates with Plug, Type 06)
D
.052–.072
[1.32–1.83]
.093
Max.
[2.36]
C
E
Panel Cutout
Dimensions
D
E
.669-.673
.693-.697
16.99-17.09
17.60-17.70
.850-.856
.881-.885
21.59-21.74
22.38-22.48
.975-.979
1.006-1.010
24.76-24.87
25.55-25.65
1.212-1.216
1.251-1.255
30.78-30.88
31.78-31.88
C
1.360
34.54
1.360
34.54
1.360
34.54
1.360
34.54
D
F
.562
14.27
.75
19.05
.875
22.23
1.125
28.58
T (Class 2A)
11/16-32UN
7/8-28UN
1-28UN
1-1/4-28UN
Master Polarizing Key
MD63-01E/RMD63-01E
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
Shell
Size
C
Hex.
B
9
12
.093 Max.
[2.36]
15
A
18
A
1.360
34.54
1.360
34.54
1.360
34.54
1.360
34.54
Dimensions
B (Max.)
.703
17.86
.891
22.63
1.016
25.81
1.203
30.56
C
.562
14.27
.75
19.05
.875
22.23
1.125
28.58
76
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 63 Series Connectors (Continued)
Accessories
Cable Clamps
T
Thread
Shell Size
Part No.
9
086-0175-00N1
12
086-0176-00N1
15
086-0177-00N1
18
086-0178-00N1
B
.156
[3.96]
.225
Max.
[5.72]
A
A
.704
17.88
.773
19.63
.829
21.06
.890
22.61
B
.750
19.05
.932
23.67
1.078
27.38
1.250
31.75
T Thread
1/2-20UNF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
1-28UN-2A
Straight
C
.156
[3.96]
.225
Max.
[5.72]
B
D
T
Thread
A
Angle
Part No.
9
086-0179-00N1
12
086-0180-00N1
15
086-0181-00N1
18
086-0182-00N1
A
.737
18.72
.913
23.19
1.048
26.62
1.225
31.12
B (Max.)
.600
15.24
.785
19.94
.962
24.43
1.185
30.10
C (Max.)
1.100
27.94
1.250
31.75
1.469
37.31
1.550
39.37
D
.879
22.32
1.067
27.10
1.233
31.21
1.550
39.37
T Thread
1/2-20UNF-2A
Circular
Connectors
Shell Size
11/16-24UNEF-2A
13/16-20UNEF-2A
1-28UN-2A
C
A
3
Protective Covers
Shell
Size
D
B
Receptacle Part No.
With Chain
Without Chain
Plug Part No.
With Chain
Without Chain
9
086-0253-00P2
086-0257-00L6
086-0261-00F5
086-0265-00L6
12
086-0254-00P2
086-0258-00L6
086-0262-00F5
086-0266-00L6
15
086-0255-00P2
086-0259-00L6
086-0263-00F5
086-0267-00L6
18
086-0256-00P2
086-0260-00L6
086-0264-00F5
086-0268-00L6
A
.813
20.65
1.000
25.40
1.125
28.58
1.594
40.49
Dimensions
B
C
.950
.813
24.13
20.65
1.000
.950
24.13
25.40
.950
1.125
24.13
28.58
.950
1.594
24.13
40.49
D
.913
23.19
.913
23.19
.913
23.19
.913
23.19
Plastic Protective Covers also available; consult Tyco Electronics.
Modifications
We offer a unique modification system which provides
alteration of standard
MARC 63 Series Connectors
to include special finishes,
accessories, and custom
quality assurance
provisions — processing,
testing, serialization,
traceability. Consult your
sales representative or
Tyco Electronics for additional modification information.
Standard modifications
include:
(801): MARC 63 Series
Connector, electroless
nickel finish
(803): MARC 63 Series
Connector including
cable clamp, straight
type
(804): MARC 63 Series
Connector including
cable clamp, rightangle type
77
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Contacts for MARC 43, MARC 53 and MARC 63 Connectors
MARC 43, MD53, MD63 Series
.702
[17.83]
.452
[11.48]
.060–.064
Dia.
[1.52–1.63]
.030–.032
Dia.
[0.76–0.81]
Wire Inspection Hole
Part Number 083-0009-00R4
(6-1532030-1) 22 AWG Pin
MARC RMD53, RMD63 Series
.767
[19.48]
.505–.525
[12.83–13.33]
.515
[13.08]
.055–.058
Dia.
[1.40–1.47]
.051–.055
Dia.
[1.30–1.40]
.030–.032
Dia.
[0.76–.0.81]
Wire Inspection Hole
Part Number 083-1200-00R4
(4-1532036-8) 22 AWG Pin
Wire Inspection Hole
.055–.058
Dia.
[1.40–1.47]
Part Number 082-0461-00Y9
(5-1532030-6) 22 AWG Socket
MARC 43, MD53, MD63 Series
.702
[17.83]
.445–.460
[11.30–11.68]
.452
[11.48]
.086–.090
Dia.
[2.18–2.29]
.086–.092
Dia.
[2.18–2.34]
.061–.063
Dia.
[1.55–1.60]
Wire Inspection Hole
Part Number 083-0158-00R4
(8-1532030-1) 16 AWG Pin
Wire Inspection Hole
Part Number 082-0113-00T1
(3-1532030-3) 16 AWG Socket
MARC 43 Series
.702
[17.83]
.452
[11.48]
.445–.460
[11.30–11.68]
.121–.126
Dia.
[3.07–3.20]
.139–.143
Dia.
[3.53–3.63]
.139–.143
Dia.
[3.53–3.63]
.093–.096
Dia.
[2.36–2.44]
Wire Inspection Hole
.121–.126
Dia.
[3.07–3.20]
Part Number 083-0173-00R4
12 AWG Pin
Wire Inspection Hole
Part Number 082-0132-00T1
(3-1532030-4) 12 AWG Socket
MARC MD53, MD63 Series
.702
[17.83]
.452
[11.48]
.068–.072
Dia.
[1.73–1.83]
.049–.053
Dia.
[1.24–1.35]
Wire Inspection Hole
.030–.032
Dia.
[0.76–0.81]
Part Number 083-1435-00R4
(7-1532037-3) 22-20 AWG Pin
78
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Contacts for MARC 43, MARC 53 and MARC 63 Connectors (Continued)
MARC 43, MD53, MD63 Series
.451–.462
[11.46–11.73]
.060–.064
Dia.
[1.52–1.63]
.051–.055
Dia.
[1.30–1.40]
Wire Inspection Hole
Part Number 082-0464-00Y9
(5-1532030-7) 22 AWG Socket
MARC MD53, MD63 Series
.451–.462
[11.46–11.73]
.068–.072
Dia.
[1.73–1.83]
.051–.055
Dia.
[1.30–1.40]
Wire Inspection Hole
Part Number 082-0466-00Y9
22-20 AWG Socket
Coaxial Contacts
MARC 43, MD53, MD63 Series
Circular
Connectors
Solder Type Coaxial
Contacts
B
B
A
A
CP Type
Contact
50 Ω
75 Ω
95 Ω
CS Type
Part No.
084-0027-00T2
(5-1532129-8)
084-0024-00T2
(5-1532129-7)
084-0028-00T2
(5-1532129-9)
084-0025-00T2
(7-1532155-0)
084-0029-00T2
(5-1532168-1)
Type
084-0026-00T2
CP
CS
CP
CS
CP
CS
A Dia.
.109
2.77
.093
2.36
.123
3.12
.106
2.69
.168
4.27
.149
3.78
B
.452
11.48
.600
15.24
.452
11.48
.600
15.24
.452
11.48
.600
15.24
3
MARC 43 Series
LEPRA/CON Crimp Type,
50 Ohm Coaxial Contacts
.600
[15.24]
.425
[10.80]
.210–.240
[5.33–6.10]
Crimp Length
.120
[3.05]
Crimp Approx.
Part Number 142-1500-0001
CS Socket
Part Number 141-1500-0001
CP Pin
79
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Contact Cavity Sealing Plugs
Size
22 AWG
16 AWG
Part No.
Application
Description
086-0001-0000
Unsealed 43 Series
086-0009-0000
Sealed 43 Series
MD53, RMD53
MD63, RMD63
086-0148-0000
RMD53, RMD63
086-0056-0000
Sealed 43 Series
MD53, MD63
086-0010-0000
Sealed 43 Series
MD53, MD63
.047–.055
Dia.
[1.19–1.40]
.447
[11.35]
.057–.065
Dia.
[1.45–1.65]
.421
[10.70]
.045–.053
Dia.
[1.14–1.35]
.940
[23.88]
.046–.054
Dia.
[1.17–1.37]
.940
[23.88]
.075–.083
Dia.
[1.91–2.11]
.421
[10.70]
.075–.083
Dia.
[1.91–2.11]
.452
[11.48]
086-0014-0000
Unsealed 43 Series
086-0057-0000
Sealed 43 Series
086-0015-0000
Unsealed 43 Series
086-0251-0000
.940
[23.88]
.140–.148
Dia.
[3.56–3.76]
12 AWG
22/20 AWG
.086–.094 Dia.
[2.18–2.39]
.121–.129 Dia.
[3.07–3.28]
.052–.055 Dia.
[1.32–1.40]
MD53, MD63
.125–.133
Dia.
[3.18–3.38]
.447
[11.35]
.140–.148 Dia.
[3.56–3.76]
.940
[23.88]
.049–.053 Dia.
[1.24–1.35]
.069–.073 Dia.
[1.75–1.85]
Size
Part No.
5052
086-0061-0000
7552
086-0062-0000
9552
086-0063-0000
5052
086-0058-0000
7552
086-0059-0000
9552
086-0060-0000
Application
Unsealed 43 Series
Sealed 43 Series
A Dia.
.112-.120
2.84-3.05
.135-.143
3.43-3.63
.178-.186
4.52-4.72
.081-.089
2.06-2.26
.106-.114
2.69-2.90
.151-.159
3.84-4.04
B Dia.
Description
—
A
Dia.
.388
[9.86]
—
—
.112-.120
2.84-3.05
.135-.143
3.43-3.63
.178-.186
4.52-4.72
A
Dia.
.913
[23.19]
80
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Assembly Tools
MARC 43, 53 and 63 Series
Connectors
Removal Tool — None required.
Crimp Tools — Turret style tool
(M22520/1-01 and TH88) MICRODOT
Part Number 010-0080-0000 — Crimps
all power contacts.
Locator Style Tool — MICRODOT
Part Number 010-0070-0000 with
locators.
Contact Size
22
22
16
Wire Size
22, 24
26
16, 18
Locator
010-0072-0000
010-0087-0000
010-0075-0000
For MARC 43 Series Connector Crimp Coax Contacts
Use 010-0132-0000 & 010-0169-0000.
MARC 73 Series Connectors
Crimp Tool Only
Locator Only
Part No.
010-3008-0000
010-3009-0000
M22520/2-01
010-3010-0000
Description
Crimp Tool w/ Locator
Crimp Tool Only
Locator Only
Part No.
010-3002-0000
010-0190-0000
010-3007-0000
Circular
Connectors
Description
Crimp Tool w/ Locator
3
81
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 73 Series Connectors
Service and Performance Data
MARC 73 Series Connectors meet or exceed the performance requirements of specification MIL-C-38999. Your sales representative or field engineer can supply detailed, cross-reference information. MARC 73 Series Connectors meet the following selected test parameters as specified below:
DESCRIPTION
TEST REQUIREMENTS
Contact Retention
Contacts are to withstand 10 lbs [44.48 N] axial load without axial displacement
in excess of 0.012 [0.30] or damage to contacts or inserts when the axial load is
applied to the mating end of the contacts in unmated plugs and receptacles at a
rate of approximately 1 lb/sec. [4.45 N].
Contact Resistance
The potential drop across normally mated contacts shall not exceed 25 mv
under room ambient and high temperature service conditions when measured
as specified in MIL C-39029 with maximum rated current.
Dielectric Withstanding
Voltage, Altitude and Sea Level
No evidence of dielectric breakdown or flashover when mated and unmated
plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
70,000 feet [21,336 m] and 1000 volts RMS at sea level.
Insulation Resistance,
Room and High Temp.
Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
minimum, at room temperature and 1000 megohms, minimum, at 257°F
[+125°C] when measured per MIL-STD 202, Method 302, Test Condition B.
Coupling and Uncoupling
Plugs and receptacles shall withstand up to 500 cycles of engagement and
separation without detrimental damage to plugs or receptacles or not satisfying
subsequent tests.
Fluid Immersion
Mating and unmating forces shall not exceed 27 Ibs [120.10 N] maximum,
(15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated
Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202, Method 204,
Test Condition D. Post inspection shall show no detrimental cracking, breaking,
or loosening of parts.
Moisture Resistance
The insulation resistance of mated connectors shall exceed 1000 megohms after
subjection to moisture resistance testing per MIL-STD-202, Method 106.
Altitude Breathing
The insulation resistance of wired and mated connectors shall be 5000
megohms, minimum, and there shall be no flashover or breakdown at test voltage
of 1000 volts RMS after the third cycle and while immersed in 5% salt water
solution at 68°F [20°C] and room ambient pressure at 68°F [20°C].
Salt Spray
Unmated plugs and receptacles shall show no excessive corrosion which
would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere per
MIL-STD-202, Method 101.
82
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 73 Series Connectors (Continued)
Service and Performance Data
I. Electrical — Electrical Ratings
Contact
Size
22 AWG
1
Current Rating
(Amperes,
Max., 81°F [+27°C])
5
Dielectric
Withstanding
Voltage (RMS)
1000
Contact
Resistance
(Millivolts, Max.)
8
Working Voltage
110,000 Ft. Alt.1
Sea Level
750
300
110,000 ft = 33,528 m
Wire Range Accommodations
Wire
Barrel
Size
Wire
Size
(AWG)
22 AWG
26
.029 Min.
0.74
24
—
22
II. Mechanical — Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
O.D. of Finished Wire
Range
Nominal
.031 Nom.
0.79
.036 Nom.
0.91
.042
1.07 Nom.
.044
1.12 Max.
Wire Spec.
MIL-W-16878
Type “E” or “ET”
Shell
Size
9
12
15
18
Type “ET”
Type “ET”
Coupling/
Uncoupling
Force
(In-Lbs.) Max.
10 [44.48]
15 [66.72]
22 [97.86]
28 [124.55]
Tightening Torque (In-Lbs.)
Mounting Nut
Retaining Nut
20 [2.26 N] Max.
20 [2.26 N] Max.
20 [2.26 N] Max.
20 [2.26 N] Max.
30-45 [3.39 Nm – 5.08 Nm]
40-55 [4.52 Nm – 6.21 Nm]
55-70 [6.21 Nm – 7.91 Nm]
70-85 [7.91 Nm – 9.60 Nm]
Operating Temperature: -67°F to 257°F [-55°C to +125°C].
Connector Mated Length: 2.217 [56.31] Max.
MARC 73 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization.
Part Number and
Ordering Information
06
E
15
91
P
N
Circular
Connectors
MD73
(***)
Modification
Designator
when applicable
Series — MD73
Single hole mntng.
receptacle
00
Line cord receptacle
01
Box mntng. receptacle
02
Straight plug, bayonet
quick disconnect
06
Polarizing position
N, 1, 2, 3, 4, etc. . . .
P — Pin power contact
S — Socket power contact
Insert arrangement number
Shell Size — O.D. of receptacle barrel to nearest .062 [19.05] inch
E — Environmentally sealed
3
Notes: Pin contacts in plug; socket contacts in receptacle.
If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately).
Contact Arrangements1
Shell Size 9
Shell Size 12
Shell Size 15
Insert Arrangement 2
Number of Contacts
Contact Size
9-273
27
22 AWG
12-613
61
22 AWG
15-913
91
22 AWG
1
2
3
Views shown are front face views of receptacles. Front face view of plug is mirror image of that shown.
Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of housing.
The 22 AWG contact arrangements will accommodate MIL-W-16878 Type ET, 22, 24, 26 AWG wire. Contact spacing
is on 0.065 [1.65] centers.
83
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 73 Series Connectors (Continued)
Configurations
Master Polarizing
Keyway
MD73-06E
Straight Plug, Bayonet
Coupling, Environmental
and Non-Environmental
(Mates with Receptacles
02, 00 and 01)
A
.093 Max.
[2.36]
B
C
Shell
Size
9
12
15
18
MD73-02E
Master Polarizing
Key
Receptacle, Box Mounting,
Environmental and NonEnvironmental (Mates with
Plug, Type 06)
Dimensions
B (Max.)
1.000
25.40
1.000
25.40
1.000
25.40
1.000
25.40
A
.813
20.65
1.000
25.40
1.125
28.58
1.594
40.49
C (Max.)
1.288
32.72
1.288
32.72
1.288
32.72
1.288
32.72
.110–.130
Dia.
[2.79–3.30]
4 Holes
B
Typ.
C
Hex.
.052–.072
[1.32–1.83]
A
Typ.
1.360
[34.54]
.093
Max.
[2.36]
D
.065–.085
[1.65–2.16]
Panel Cutout
.375 [9.53] Max. Panel Thickness
Shell
Size
A
.875
22.23
1.000
25.40
1.125
28.58
1.344
34.14
9
12
15
18
B
.662
16.81
.786
19.96
.906
23.01
1.062
26.97
Master Polarizing
Key
MD73-00E
Receptacle, Single Hole
Mounting, Environmental
and Non-Environmental
(Mates with Plug, Type 06)
B
Hex.
Dimensions
C
.562
14.27
.75
19.05
.875
22.23
1.125
28.58
D
.693-.697
17.60-17.70
.881-.885
22.38-22.48
1.006-1.011
25.55-25.68
1.250-1.260
31.75-32.00
.125
[3.18]
A
Hex.
F
Hex.
T
Thread
C
D
.093 Max.
[2.36]
E
Panel Cutout
Shell
Size
9
12
15
18
A
.813
20.65
1.000
25.40
1.125
28.58
1.625
41.28
B
.75
19.05
.937
23.80
1.062
26.97
1.375
34.93
C
1.360
34.54
1.360
34.54
1.360
34.54
1.360
34.54
Dimensions
D
.669-.673
16.99-17.09
.850-.856
21.59-21.74
.975-.979
24.77-24.87
1.212-1.216
30.78-30.89
E
.693-.697
17.60-17.70
.881-.885
22.38-22.48
1.006-1.010
25.55-25.65
1.251-1.255
31.78-31.88
F
.562
14.27
.75
19.05
.875
22.23
1.125
28.58
T (Class 2A)
11/16-32UN
7/8-28UN
1-28UN
1-1/4-28UN
84
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 73 Series Connectors (Continued)
Configurations (Continued)
Master Polarizing
Key
MD73-01E
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
C
Hex.
B
.093 Max.
[2.36]
A
Shell
Size
Dimensions
B (Max.)
.703
17.86
.891
20.57
1.016
25.81
1.203
30.56
A
1.360
34.54
1.360
34.54
1.360
34.54
1.360
34.54
9
12
15
18
Accessories
C
.562
14.27
.75
19.05
.875
22.23
1.125
28.58
T Thread
Cable Clamps
B
.225 Max.
[5.72]
Shell Size
Clamp Part No.
9
086-0341-00N1
12
086-0342-00N1
15
086-0343-00N1
18
086-0344-00N1
A
.704
17.88
.773
19.63
.829
21.06
.890
22.61
T Thd. 2A
1/2-20 UNF
11/16-24 UNEF
13/16-20 UNEF
1-28 UN
3
C
.156
[3.96]
.225 Max.
[5.72]
B
.750
19.05
.932
23.67
1.078
27.38
1.250
31.75
Circular
Connectors
.156
[3.96]
A
B
D
T Thread
A
Shell Size
Clamp Part No.
9
086-0337-00N1
12
086-0338-00N1
15
086-0339-00N1
18
086-0340-00N1
A
.737
18.72
.913
23.19
1.048
26.62
1.225
31.12
B (Max.)
.600
15.24
.785
19.94
.962
24.43
1.185
30.10
C (Max.)
1.100
27.94
1.250
31.75
1.469
37.31
1.550
39.37
D
.879
22.33
1.067
27.10
1.233
31.32
1.550
39.37
T Thd. 2A
1/2-20 UNF
11/16-24 UNEF
13/16-20 UNEF
1-28 UN
85
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MARC 73 Series Connectors (Continued)
Accessories (Continued)
Contacts
Twist pin — 22 Pins and
Sockets
Copper alloy plated .000050 [0.00127]
gold over copper flash per MIL-G-45204,
Type II
Rating — 5 amps
Contact Resistance — .008 ohms
max.
.415
[10.54]
.034
Dia.
[0.86]
.050 Dia.
[1.27]
.680
[17.27]
.042
Dia.
[1.07]
.250
[6.35]
.035
Dia.
[0.89]
.250
[6.35]
.030
Dia.
[0.76]
.050
Dia.
[1.27]
.030–.032
Dia.
[0.76–0.81]
Part Number 096-0526-0000
Part Number 096-0626-0001
Engineering/Separation Forces —
6 oz. [1.67 N] max. / .502 [.139 N] min.
Durability — 2000 cycles
Contact Cavity Sealing Plugs
.437
[11.10]
.800
[20.32]
.264
[6.71]
.035–.041
[0.89–1.04]
Part Number 086-0331-0000
Contact Size
22 AWG
.264
[6.70]
.036–.044
[0.91–1.10]
Part Number 086-0330-0000
Sealing Plug
086-0331-0000
Filler Plug
086-0330-0000
Note: Sealing plug occupies insert and grommet cavities.
Filler plug occupies insert cavity only.
86
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MQR Series — Microminiature Circular Connectors
MQR stands for MICRODOT
Quick Release. This line of
circular quick disconnect
connectors has metal shells
with push-pull couplings
which provide a positive
connection for rugged
environmental use. The
MQR series is specified for
cable-to-cable and cableto-panel applications.
“active” or “live”, the pins
require the physical protection that the receptacle side
offers. (Similar to a “protected” or “shrouded” header.)
The plug connector side
contains socket contacts.
The receptacle connector
side contains pin contacts.
Because the pin contact is
MQR connectors are
manufactured to the performance specifications of
MIL-DTL-83513.
How to Specify/
Ordering Code
While there is no optional
hardware for the MQR
series, the receptacles
incorporate a standard jam
nut to tighten the connector
down to the board or panel.
S — Solder pot
X — Special, Does not fit description.
MQR
A
37
P
6
A
1
18.0
Length in Inches (Min.)
Connector Series
Insulation Color or Finish
Shell, Material & Finish
Number of Contacts**
Wire Type
7, 19, 37*
Shell
Per MIL-W-16878
P — Plug (Socket Contact)
F — Receptacle, Front Panel Mount
(Pin Contact)
R — Receptacle, Rear Panel Mount
(Pin Contact)
*uses twist pin contacts
** Other non-standard sizes are also available,
contact Tyco Electronics for details.
7
19
37
A (Hex)
.500
12.7
.625
15.88
.812
20.62
B (Min.)
.361
9.17
.477
12.16
.722
18.39
Dimensions
Ø C (Min.)
.376
9.55
.501
12.73
.751
19.07
{
A — Type E, 7 strand
B — Type ET, 7 strand
C — Type E, 19 strand
D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(28 AWG only)
G — 19 strand per MIL-C-22759/11
26 AWG, 24 AWG
L — Copper, solid
Q — Stranded per MIL-W-22759/33
3
Wire Size
4 — 24 AWG
5 — 25 AWG
6 — 26 AWG
8 — 28 AWG
0 — 30 AWG
Key
Front Panel Mount (MQR Receptacle)
Size
Circular
Connectors
1 — All white
6 — Bare (unfinished)
2 — All yellow
7 — Color coded per MIL-STD-681, System I
3 — All gray
9 — 10 Solid color repeating (starts with black)
4 — Gold plated
5 — Tin dipped gold plated
A — Aluminum, Electroless Nickel Finish
B — Brass, Sulfamate Nickel Finish
D Thd.
3/8-32 UNEF-2A
A
Hex.
1/2-28 UNEF-2A
3/4-20 UNEF-2A
D Thd.
.400
[10.16]
B
Min.
ØC
Min.
Mounting Hole
For Front Panel Mount
Front Panel Mount (19 Position Shown)
87
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MQR Series — Microminiature Circular Connectors (Continued)
Rear Panel Mount (MQR Receptacle)
Size
7
19
37
A (Hex)
.500
12.7
.687
17.45
.812
20.62
B (Min.)
.422
10.72
.531
13.49
.722
18.39
Dimensions
Ø C (Min.)
.440
11.18
.564
14.33
.751
19.07
.050
Typ.
[1.27]
.025
Typ.
[0.64]
D Thd.
Key
7/16-28 UNEF-2A
A
Hex.
9/16-24 UNEF-2A
.0433
Typ.
[1.10]
3/4-20 UNEF-2A
.036 ±.005
Typ.
[0.91± 0.13]
D Thd.
B
Min.
.250
[6.35]
L
Min.
ØC
Min.
Mounting Hole
For Rear Panel Mount
Rear Panel Mount (19 Position Shown)
Circular MQR Series Quick Release Receptacle
7 Position
(Stamped Pin)
19 Position
(Stamped Pin)
37 Position
(Twist Pin)
2
2
1
2
7
3
4
3
13
17
9
7
10
15
12
16
22
16
23
29
8
5
4
5
4
6
3
1
1
19
28
33
37
34
18
35 36
Circular MQR Series Quick Release Plug
.130–.144
Typ.
[3.30–3.66]
.050
Typ.
[1.27]
.025
Typ.
[0.64]
Keyway
MQR Plug
Size
7
19
37
Dimensions
ØB
ØA
.375
.300
9.53
7.62
.400
.475
12.07
10.16
.750
.630
19.05
16.00
ØA ØB
.795
[20.19]
.0433
Typ.
[1.10]
L
Min.
Plug (19 Position Shown)
7 Position
19 Position
37 Position
3
2
1
7
3
2
6
7
3
5
4
1
12
8
16
13
17
18
5
9
4
19
2
4
1
15
10
22
16
23
29
28
33
34
37
36 35
88
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MTC Series — Microminiature Circular Connectors
How to Specify/
Ordering Code
X — Special, Does not fit description.
MTC
19
P
6
A
1
18.0
Length in Inches (Min.)
MICRODOT Threaded Coupling Series
Insulation Color or Finish
Number of Contacts
1 — All white
6 — Bare (unfinished)
2 — All yellow
7 — Color coded per MIL-STS-681, System I
3 — All gray
9 — 10 Solid color repeating (starts with black)
4 — Gold plated
5 — Tin dipped gold plated
9, 19
Contact Type
P — Twist Pin (Plug)
S — Socket (Receptacle)
Wire Type
Per MIL-W-16878
{
A — Type E, 7 strand
B — Type ET, 7 strand
C — Type E, 19 strand
D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(28 AWG only)
G — 19 strand per MIL-C-22759/11
(26 AWG and 24 AWG only)
L — Copper, solid
Q — Stranded per MIL-W-22759/33
Wire Size
4 — 24 AWG
Material and Finish
5 — 25 AWG
6 — 26 AWG
8 — 28 AWG
0 — 30 AWG
MTC Series Plug
Size
Dimensions
ØB
.456
11.58
.545
13.84
ØA
.227
5.77
.308
7.82
9
19
C Thd.
M10 x 0.75
19.05
M12 x 1
25.40
Circular
Connectors
Shell — Aluminum, nickel plated
Contact — Copper alloy, gold plated
Insulator — RYTON
Key
3
ØB
.036 ±.005
Typ.
[0.91 ±0.13]
9 Position
19 Position
ØA
2
9
1
8
3
7
C Thd.
.800
[20.32]
3
2
4
6
5
1
7
4
12
8
16
13
19
18
17
L
Min.
MTC Series Plug (19 Position Shown)
89
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
MTC Series — Microminiature Circular Connectors (Continued)
MTC Series Receptacle
Size
9
19
ØA
.562
14.27
.625
15.88
B Hex.
.500
12.70
.625
15.88
Dimensions
C Thd.
M10 x 0.75
19.05
M12 x 1
25.40
D Min.
.370
9.40
.445
11.30
Ø E Min.
.394
10.01
.474
12.04
Keyway
9 Position
19 Position
2
2
1
1
9
3
8
3
4
7
8
4
7
5
B
Hex.
12
13
6
16
17
19
18
C Thd.
.130–.144
Typ.
[3.30–3.66]
.900
[22.86]
ØE
D
L
Min.
Panel Cut Out
ØA
MTC Series Receptacle (19 Position Shown)
90
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Introduction
Product Facts
n
n
n
n
n
n
Designed to accept 50,
70 and 93 ohm miniature
coaxial cables
Three types of connectors:
Screw-on Series, Slide-on
Series and Quick-Connect
Series
Temperature range —
-85°F to +257°F [-65°C to
+125°C] (with neoprene
gasket or bend relief cap)
-80°F to 392°F [-62°C to
+200°C] (with silicone gasket or bend relief cap)
Dielectric Withstanding
Voltage — 1000 volts RMS
at sea level
Contact Resistance —
3 milliohms max., D.C.
Captive Contacts —
Terminated connector
contacts captivated from
movement in both directions
the Gold Plated Crimp Style
Coaxial Connector Series
and offers the dependability
of a threaded coupling. For
enhanced safety, choose
connectors with wire holes.
The Quick-Connect Series
offers the convenience of
Slide-On coupling with
added retention provided
by a snap ring located on
the jack/receptacle side.
Choose Slide-On Series for
the fastest, most convenient
mating and unmating.
Consult Tyco Electronics
for special cable accommodations and mounting
features.
Coaxial
Connectors
MICRODOT Standard
Coaxial Connectors are
designed to accept 50, 70,
and 93 Ohm miniature
coaxial cables. These connectors are available as
Screw-On Series, Slide-On
Series, or Quick-Connect
Series. The Screw-On
Series is intermateable with
4
91
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors
Performance Data
Summary
For Standard Connectors
Mechanical
Captive Contacts — Terminated connector contacts captivated from movement in both directions.
Cable Retention —
50 Ohm connectors, 15 lb. min.1
70 Ohm connectors, 25 lb. min.1
93 Ohm connectors, 35 lb. min.1
Recommended Coupling Torque
(Threaded Interface) —
8 inch/pounds max.
Recommended Receptacle
Mounting Torque (All Series) —
8 inch/pounds max.
Unmating Force (Slide-On Series) —
1-7 pounds.
Contact Protection (Unmated) —
Pin contact protected by coupling nut
(threaded series)2 or by housing (QuickConnect and Slide-On Series). Socket
protected by insulator and housing.
Assembly Methods
Straight Plugs & Jacks — Cable
Inner Conductor: Soldered to contact.
Cable Shield: Crimped to jerk ring (solder optional).
Angle Plugs — Cable Inner Conductor:
Soldered to contact. Cable Shield:
Soldered to ring & housing.
Vibration3,4 — MIL-STD-202, Method
204, Test condition B (15 G peak). No
physical damage or electrical discontinuities in excess of 1 microsecond.
Shock3,4 — MIL-STD-202, Method
213, Test Condition H. No physical damage or electrical discontinuity after
shock.
Thermal Shock — MIL-STD-202,
Method 107, Test Condition B.
Moisture Resistance3 — MIL-STD202, Method 106.
Salt Spray3 — MIL-STD-202, Method
101, Test Condition B (48 hours).
Electrical
Impedance — Designed to be compatible with 50, 70, or 93 Ohm miniature
coaxial cable.
Dielectric Withstanding Voltage —
1000 volts RMS at sea level.
Contact Resistance — 3 milliohms
max., D.C.
Current Capacity — 3 amps, D.C.
Insulation Resistance — 5 x 103
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio5
(VSWR) — Typical 50 Ohm series, 1.2
max. to 2 GHz.
Materials
Environmental
Temperature Range (Continuous
Service) — -85°F to +257°F [-65°C to
+125°C] (with Neoprene gasket or bend
relief cap). -80°F to 392°F [-62°C to
+200°C] (with Silicone gasket or bend
relief cap).
Housing, Nut, Jerk Ring — Brass
per ASTM-B-16.
Insulator — TEFLON per
ASTM-D-1710.
Pin Contact (Plugs) — Brass per
ASTM-B-16.
Socket Contact (Jacks &
Receptacles) — Beryllium Copper
per ASTM-B-196.
Bend Relief Caps (Plugs & Jacks) —
Neoprene or Silicone Rubber per
ZZ-R-765.
Gaskets (Jacks & Receptacles) —
Neoprene or Silicone Rubber per
ZZ-R-765.
Lockwasher — #425 Bronze Alloy.
Plating
Contacts — Gold per MIL-G-45204,
Type II, Grade C, Class 1.
Housing, Nut, Jerk Ring,
Lockwasher — Silver per QQ-S-365,
Type II, Grade A, .0002 [.005] min.
Notes:
1
Termination to cables with foamed
dielectrics excluded. Straight connector jerk rings must be soldered
to cable shield.
2
Pin protector required. See individual connector specifications.
3
Screw-On Series, threaded interface.
4
Tyco Electronics recommends the
use of safety wired connectors in
vibration and shock environment.
See individual specifications for
connectors with safety wire holes.
5
VSWR is a system specification.
Where performance is critical,
purchase Tyco Electronics cable
assemblies with Screw-On or
Quick-Connect Series connectors
and specify VSWR testing and
mating connector part number.
92
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Screw-On Series
See page 128 for mating options.
Jack
S-50 Ohm Series
031-0034-0001
051-0467-0001
S-70 Ohm Series
031-0036-0001
031-0090-0001
S-93 Ohm Series
031-0037-0001
031-0088-0001
S-70 Ohm Series
031-0048-0001
S-93 Ohm Series
031-0032-0001
031-0089-0001
S-70 Ohm Series
031-0051-0001
S-93 Ohm Series
031-0052-0001
S-70 Ohm Series
031-0017-0001
031-0018-0001
S-93 Ohm Series
031-0016-0001
031-0019-0001
031-0046-0001
Plug
S-50 Ohm Series
032-0021-0001
032-0023-0001
032-0025-0001
032-0033-0001
032-0097-0001
032-0098-0001
032-0155-0001
032-0156-0001
052-0213-0001
052-0235-0001
052-0235-0003
052-0370-0001
052-0542-0001
S-70 Ohm Series
032-0010-0001
032-0022-0001
032-0067-0001
032-0078-0001
032-0222-0001
052-0092-0001
S-93 Ohm Series
032-0011-0001
032-0017-0001
032-0066-0001
032-0071-0001
032-0092-0001
032-0099-0001
052-0200-0001
Bulkhead Jack
S-50 Ohm Series
031-0033-0001
Receptacle
S-50 Ohm Series
031-0050-0001
051-0318-0001
Right-Angle Plug
S-50 Ohm Series
032-0015-0001
052-0204-0001
052-0215-0001
052-0337-0001
S-70 Ohm Series
032-0013-0001
052-0299-0001
052-0379-0001
S-93 Ohm Series
032-0014-0001
032-0068-0001
032-0153-0001
052-0207-0001
052-0298-0001
052-0304-0022
Coaxial
Connectors
Receptacle
S-50 Ohm Series
031-0001-0001
031-0001-0003
031-0002-0001
031-0003-0001
031-0024-0001
051-0125-0001
4
Printed Circuit Receptacle
S-50 Ohm Series
031-0059-0001
031-0062-0001
051-0450-0001
S-70 Ohm Series
031-0069-0001
Right-Angle Printed Circuit Receptacle
S-93 Ohm Series
031-0067-0001
031-0080-0001
S-50 Ohm Series
031-0061-0001
051-0459-0001
S-70 Ohm Series
031-0072-0001
S-93 Ohm Series
031-0073-0001
93
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Screw-On Series (Continued)
Plugs
A
S-50, 70 & 93
B
.030–.033
Pin
[.762–.838]
Part No.
Dim.
A
Dim.
B
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
1
408-08521
RF-ASMB-88
010-0003-0000
1
Cable Jacket
Max.
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread
.745
.230
032-0021-0001
5.84 Dia.
18.92
.230
.745
032-0023-0001
5.84 Dia.
18.92
.230
.745
032-0025-0001
18.92
5.84 Dia.
.745
.230
032-0033-0001
5.84 Dia.
18.92
.250
.745
032-0097-0001
6.35 Hex.
18.92
.250
.745
032-0098-0001
18.92
6.35 Hex.
.700
.250
032-0155-0001
17.78
6.35 Hex.
.700
.250 Dia.
032-0156-0001
17.78
6.35
.745
.250 Hex.
052-0213-0001
18.92
6.35
.745
.250 Hex.
052-0235-0001
18.92
6.35
.745
.250 Hex.
052-0235-0003
18.92
6.35
.745
.250 Hex.
052-0370-0001
18.92
6.35
.745
.250 Hex.
052-0542-0001
18.92
6.35
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread
.760
.255 Dia.
032-0010-0001
19.30
6.48
.760
.255 Dia.
032-0022-0001
19.30
6.48
.755
.255
032-0067-0001
19.18
6.48 Dia.
.755
.255
032-0078-0001
19.18
6.48 Dia.
.760
.281 Hex.
032-0222-0001
19.30
7.14
.255
.760
052-0092-0001
19.30
6.48 Dia.
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread
.320
.760
032-0011-0001
19.30
8.13 Dia.
.760
.320 Dia.
032-0017-0001
19.30
8.13
.950
.350
032-0066-0001
24.13
8.89 Dia.
.760
.320
032-0071-0001
19.30
8.13 Dia.
.320
.760
032-0092-0001
19.30
8.13 Dia.
.760
.312
032-0099-0001
7.92 Hex.
19.30
.312
.760
052-0200-0001
19.30
7.92 Hex.
.087
2.21
.087
2.21
.093
2.36
.093
2.36
.087
2.21
.087
2.21
.088
2.24
.088
2.24
.087
2.21
.087
2.21
.087
2.21
.093
2.36
.087
2.21
.093
2.36
.093
2.36
.108
2.74
.108
2.74
.093
2.36
.093
2.36
.134
3.40
.134
3.40
.154
3.91
.134
3.40
.155
3.94
.134
3.40
.134
3.40
Pin Protector
Special Features
Solderless Assembly
408-08522
RF-ASMB-89
010-0003-0000
1
408-08521
RF-ASMB-88
010-0003-0000
1
408-08522
RF-ASMB-89
010-0003-0000
1
Solderless Assembly, Hex Nut
408-08521
RF-ASMB-88
010-0003-0000
Hex Nut
408-08522
RF-ASMB-89
010-0003-0000
Hex Nut, .187 [4.75]
Hex Cable Clamp Nut
1, 2
.187 [4.75]
Hex Cable Clamp Nut
1
Solderless, Hex Nut w/ Safety
Wire Holes, .021 [0.53] Wire Max.
408-08522
RF-ASMB-89
010-0003-0000
408-08522
RF-ASMB-89
010-0003-0000
408-08521
RF-ASMB-88
010-0003-0000
408-08522
RF-ASMB-89
010-0003-0000
Solderless Assembly
1, 2
Hex Nut
1, 2
Hex Nut w/ Safety Wire Holes,
.021 [0.53] Wire Max.
1
Hex Nut, Designed for
Dual Shield Cable
408-08522
RF-ASMB-89
010-0003-0000
408-08522
RF-ASMB-89
010-0003-0000
Hex Nut
408-08522
RF-ASMB-89
010-0003-0000
1
Solderless Assembly
408-08521
RF-ASMB-88
010-0004-0000
1
408-08525
RF-ASMB-95
010-0004-0000
1
408-08522
RF-ASMB-89
010-0035-0000
Solderless Assembly
408-08521
RF-ASMB-88
010-0035-0000
Hex Nut w/ Safety Wire Holes,
.014 [0.35] Wire Max.
408-08525
RF-ASMB-95
010-0004-0000
408-08525
RF-ASMB-95
010-0004-0000
1
408-08521
RF-ASMB-88
010-0005-0000
1
408-08525
RF-ASMB-95
010-0005-0000
1
Silicone Bend Relief Cap
408-08523
RF-ASMB-90
—
Cable Inner Conductor,
.031 [0.78] Max.
408-08525
RF-ASMB-95
010-0005-0000
1
408-08525
RF-ASMB-95
010-0044-0000
Hex Nut
408-08525
RF-ASMB-95
010-0005-0000
Hex Nut w/ Safety Wire Holes,
.015 [0.38] Wire Max.
408-08525
RF-ASMB-95
010-0005-0000
1, 2
1
1
1
2
Solderless Assembly
1
1
1
Pin protected.
Hole in ferrule permits soldering to clamp ring and shield for increased cable pullout strength.
1
2
94
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Screw-On Series (Continued)
Right-Angle Plugs
B
S-50, 70 & 93
C
ANGLE PLUG
A
Part No.
Dim.
A
Dim.
B
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread
.735
.225 Dia.
032-0015-0001
18.67
5.72
.735
.250
052-0204-0001
18.67
6.35 Hex.
052-0215-0001
.735
18.67
.250
6.35 Hex.
.225
.745
18.92
5.72 Dia.
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread
.745
.255 Dia.
032-0013-0001
18.92
6.48
052-0337-0001
052-0299-0001
.745
18.92
.281
7.14 Hex.
.745
.281 Hex.
18.92
7.14
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread
.745
.320 Dia.
032-0014-0001
18.92
8.13
.745
.320 Dia.
032-0068-0001
18.92
8.13
.745
.312 Hex.
032-0153-0001
18.92
7.92
.745
.312 Hex.
052-0207-0001
18.92
7.92
052-0379-0001
Dim.
C
Cable
Jacket
Max.
.570
14.48
.570
14.48
.092
2.34
.092
2.34
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-08520
RF-ASMB-87
010-0016-0000
Hex Nut
408-08520
RF-ASMB-87
010-0016-0000
408-08520
RF-ASMB-87
010-0016-0000
408-08520
RF-ASMB-87
010-0016-0000
Special Features
.570
14.48
.092
2.34
Hex Nut w/ Safety
Wire Holes,
.021 [.533] Wire Max.
.570
14.48
.111
2.82
Dual Shield Cable
.570
14.48
.111
2.82
RF-ASMB-87
010-0016-0000
408-08520
RF-ASMB-87
010-0016-0000
408-08520
RF-ASMB-87
010-0016-0000
408-08520
RF-ASMB-87
010-0017-0000
408-08520
RF-ASMB-87
010-0017-0000
Hex Nut
408-08520
RF-ASMB-87
010-0017-0000
Hex Nut
408-08520
RF-ASMB-87
010-0017-0000
408-08520
RF-ASMB-87
010-0017-0000
408-08520
RF-ASMB-87
010-0017-0000
.570
14.48
.111
2.82
.570
14.48
.111
2.82
Hex Nut
.630
16.00
.630
16.00
.630
16.00
.630
16.00
.134
3.40
.155
3.94
.155
3.94
.134
3.40
052-0298-0001
.745
18.92
.312
Hex.
7.92
.630
16.00
.134
3.40
052-0304-0022
.745
18.92
.312 Hex.
7.92
.630
16.00
.155
3.94
Hex Nut w/ Safety
Wire Holes,
.015 [.381] Wire Max.
Hex Nut w/ Safety
Wire Holes,
.015 [.381] Wire Max.,
Silicone Bend
Relief Cap
Coaxial
Connectors
408-08520
Hex Nut w/ Safety
Wire Holes,
.014 [.355] Wire Max.
4
95
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Screw-On Series (Continued)
Jacks
S-50, 70 & 93
.400
[10.16]
B Max. Panel
A
.375
Hex.
[9.52]
ØB
.375
Hex.
[9.52]
Mounting Nut
Fig.
Dim.
A
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread
.870
2
031-0033-0001
22.10
.750
031-0034-0001
1
19.05
.720
051-0467-0001
1
18.30
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread
.760
031-0036-0001
1
19.30
.880
031-0048-0001
2
22.35
.760
031-0090-0001
1
19.30
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread
.880
031-0032-0001
2
22.35
.760
031-0037-0001
1
19.30
1.000
031-0088-0001
1
25.40
.750
031-0089-0001
2
19.05
Ø .313 Min.
[7.95]
Lock Washer
Fig. 1
Part No.
.292 Min.
[7.42]
Fig. 2
Dim.
B
Cable
Jacket
Max.
.140
3.56
.235
5.97
.235
5.97
.088
2.24
.087
2.21
.079
2.01
.255
6.48
.140
3.56
.255
6.48
.155
3.94
.320
8.13
.320
8.13
.140
3.56
Mounting Hole
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-08522
RF-ASMB-89
010-0003-0000
408-08522
RF-ASMB-89
010-0003-0000
408-08522
RF-ASMB-89
010-0003-0000
.093
2.36
.093
2.36
.109
2.77
408-08522
RF-ASMB-89
010-0004-0000
408-08525
RF-ASMB-95
010-0004-0000
408-08522
RF-ASMB-89
010-0035-0000
.134
3.40
.134
3.40
.154
3.91
.154
3.91
408-08525
RF-ASMB-95
010-0005-0000
408-08525
RF-ASMB-95
010-0005-0000
408-08533
RF-ASMB-106
—
408-08524
RF-ASMB-92
—
Special Features
Hex Collet Cable Clamp
No Mounting Flat,
Hex Nut Cable Clamp
96
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Screw-On Series (Continued)
Receptacles
A
A
B Max.
Panel
B Max.
Panel
E Ø Min.
C
C
D Hex.
D Hex.
F Min.
Solder Pot
Turret
Mounting
Nut
Solder Lug
Solder Lug
Mounting Nut
Fig. 1
Fig. 2
A
A
B
.245
[6.22]
B
C
Mounting Hole
for Fig. 1 & 2
.100 ± .005
[2.54 ± .127]
Typ.
D
.200 ± .005
[5.08 ± .127]
Typ.
C
Ø .055 Min.
[1.40] Typ.
Ø .037
Typ.
[.940]
Ø .037
Typ.
[.940]
Fig. 3
Mounting Pattern
for Fig. 3 & 4
Dim.
C
Dim.
D
Dim.
E
Dim.
F
.187 Wrench Flats
4.75
.187 Wrench Flats
4.75
.187
4.75 Wrench Flats
.187
4.75 Wrench Flats
.344 Wrench Flats
8.74
.250
6.35 Hex.
.330
8.38 Dia.
.330
8.38 Dia.
.250
6.35
.250
6.35
.250
6.35
—
No Mounting Flat
—
No Mounting Flat
—
No Mounting Flat
—
No Nut or Solder Lug, Threads into Panel
.438
11.13
.250
4.75
.191
4.85
.191
4.85
.191
4.85
.190 -32
4.83
.345
8.76
.191
4.85
—
Housing Isolated by Nylon Insulator
.173
4.39
—
—
—
.480
12.20
—
—
—
—
—
—
.250
4.75
.138
3.50
.191
4.85
.173
4.39
Fig.
.330
8.38 Dia.
.187 Wrench Flats
4.75
.250
Hex.
6.35
.330
8.38 Dia.
—
—
Special Features
No Mounting Thread, Solder or Press into Panel
w/ Safety Wire Holes, .014 [.355] Wire Max.
—
—
—
.330 Dia.
8.38
.480
12.20
—
—
3 Outer Legs
.250
6.35
.250
6.35
.250
6.35
.330
8.38
.330
8.38
.217
5.51
.217
5.51
.217
5.51
—
No Mounting Flat
—
No Mounting Flat
Hex.
.281
7.14
.281
7.14
.281
7.14
.197
5.00
Dia.
—
—
—
Dia.
.480
12.20
—
—
Hex.
Hex.
Coaxial
Connectors
Dim.
Dim.
A
B
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread
.515
.080
031-0001-0001
2
13.08
2.03
.510
.110
031-0001-0003
2
12.95
2.80
.515
.150
031-0002-0001
2
13.08
3.81
.255
—
031-0003-0001
2
6.48
.555
.120
031-0024-0001
2
14.10
3.05
.605
.160
031-0050-0001
1
15.37
4.06
.340
.155
031-0059-0001
3
8.64
3.93
.425
.155
4
031-0061-0001
10.80
3.93
.345
.250
031-0062-0001
3
8.76
6.35
.315
.125
051-0125-0001
2
3.18
8.00
.605
.160
051-0318-0001
1
15.37
4.06
.050
.340
051-0450-0001
3
8.64
1.27
.425
.155
051-0459-0001
4
10.80
3.93
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread
.555
.100
031-0017-0001
2
14.10
2.54
.555
.160
031-0018-0001
2
14.10
4.06
.605
.160
031-0051-0001
1
4.06
15.37
.340
.155
3
031-0069-0001
3.94
8.64
.155
.425
4
031-0072-0001
10.80
3.94
Part No.
Fig. 4
4
97
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Screw-On Series (Continued)
Receptacles (Continued)
Dim.
Dim.
A
B
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread
.100
.555
031-0016-0001
2
2.54
14.10
.160
.555
2
031-0019-0001
14.10
2.54
.555
.120
2
031-0046-0001
3.05
3.05
.160
.605
031-0052-0001
1
15.37
2.54
.340
.155
3
031-0067-0001
3.94
8.64
.425
.155
4
031-0073-0001
3.94
10.80
.250
.345
031-0080-0001
3
8.76
6.35
Part No.
Dim.
C
Dim.
D
Dim.
E
.312
7.92 Hex.
.312
7.92 Hex.
.345 Wrench Flats
8.76
.312
Hex.
7.92
.330
8.38 Dia.
.330
8.38 Dia.
.330
Dia.
8.38
.312
7.92
.312
7.92
.438
11.13
.312
7.92
.251
6.38
.251
6.38
.345
8.76
.251
6.38
.232
5.89
Fig.
Dim.
F
Special Features
—
No Mounting Flat
—
No Mounting Flat
—
Housing Isolated by Nylon Insulator
—
—
—
.480
12.20
—
—
—
—
—
98
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Slide-On Series
All plugs shown below mate with all
jacks/receptacles shown below.
Jack
SOS-50 Ohm Series
031-0053-0001
SOS-70 Ohm Series
031-0095-0001
SOS-93 Ohm Series
031-0063-0001
031-0093-0001
Plug
SOS-50 Ohm Series
032-0055-0001
SOS-70 Ohm Series
032-0060-0001
032-0087-0001
SOS-93 Ohm Series
032-0077-0001
032-0084-0001
Bulkhead Jack
SOS-50 Ohm Series
031-0054-0001
SOS-70 Ohm Series
SOS-93 Ohm Series
031-0064-0001
031-0094-0001
SOS-70 Ohm Series
031-0049-0001
051-0258-0001
051-0325-0001
SOS-93 Ohm Series
031-0049-0001
051-0258-0001
051-0325-0001
Right-Angle Plug
SOS-50 Ohm Series
032-0063-0001
SOS-70 Ohm Series
032-0062-0001
SOS-93 Ohm Series
032-0059-0001
032-0083-0001
Receptacle
SOS-50 Ohm Series
031-0049-0001
051-0258-0001
051-0325-0001
Coaxial
Connectors
Plug Receptacle
SOS-50 Ohm Series
032-0042-0001
052-0061-0001
052-0471-0001
SOS-70 Ohm Series
032-0042-0001
052-0061-0001
052-0471-0001
SOS-93 Ohm Series
032-0042-0001
052-0061-0001
052-0471-0001
Right-Angle Printed Circuit Receptacle
SOS-50 Ohm Series
031-0070-0001
SOS-70 Ohm Series
031-0070-0001
SOS-93 Ohm Series
031-0070-0001
4
Bulkhead Plug
SOS-50 Ohm Series
032-0056-0001
Printed Circuit Receptacle
SOS-70 Ohm Series
032-0061-0001
SOS-93 Ohm Series
032-0058-0001
SOS-50 Ohm Series
031-0060-0001
031-0065-0001
SOS-70 Ohm Series
031-0060-0001
031-0065-0001
SOS-93 Ohm Series
031-0060-0001
031-0065-0001
99
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Slide-On Series (Continued)
Straight Plugs
A
C Max.
Panel
.290
[7.37]
A
D Hex.
B Hex.
ØB
Contact
Tail
Mounting Nut
Solder Lug
Fig. 1
Fig. 2
Plug Receptacle
A
.500
[12.70]
C Max. Panel
ØE
Min.
Hex.
B Hex.
Mounting Nut
Lock Washer
Fig. 3
Bulkhead Plug
Part No.
Fig.
Mounting Hole
for Fig. 2 & 3
Dim.
A
Dim.
B
Dim.
C
Dim.
D
Dim.
E
Cable
Max.
Jacket
Special
Features
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
.705
17.91
.870
22.10
.950
24.13
.750
19.05
.590
14.99
.250
6.35
.250
6.35
.375
9.53
.250
6.35
.250
6.35
.160
4.06
.281
7.14
.217
5.51
—
Turret Pin
Contact Tail
—
—
—
—
—
—
408-08526
RF-ASMB-97
010-0007-0000
.145
3.68
.160
4.06
.095
2.41
.375
9.53
.281
7.14
.281
7.14
.313
7.95
.217
5.51
.217
5.51
.088
2.24
.088
2.24
408-08526
RF-ASMB-97
010-0007-0000
—
—
—
—
—
—
.705
17.91
.880
22.35
.960
24.38
.880
22.35
.750
19.05
.590
14.99
.250
6.35
.250
6.35
.375
9.53
.250
6.35
.250
6.35
.250
6.35
.160
4.06
.281
7.14
—
—
—
—
408-08529
RF-ASMB-102
010-0007-0000
.145
3.68
408-08526
RF-ASMB-97
010-0007-0000
408-08526
RF-ASMB-97
010-0036-0000
—
—
—
—
—
—
.705
17.91
.960
24.38
.880
22.35
1.06
26.92
.750
19.05
.590
14.99
.250
6.35
.375
9.53
.250
6.35
.250
6.35
.250
6.35
.250
6.35
—
—
—
408-08529
RF-ASMB-102
010-1008-0000
408-08529
RF-ASMB-102
010-1008-0000
408-08523
RF-ASMB-90
—
—
—
—
—
—
—
SOS-50 Series (50 Ohm)
032-0042-0001
032-0055-0001
032-0056-0001
2
1
3
052-0061-0001
2
052-0471-0001
2
—
Solder Pot
Contact Tail
Straight Pin
Contact Tail1
.217
5.51
—
Turret Pin
Contact Tail
—
—
.375
9.53
.313
7.95
.093
2.36
.093
2.36
.108
2.24
—
SOS-70 Series (70 Ohm)
032-0042-0001
2
032-0060-0001
1
032-0061-0001
3
032-0087-0001
1
052-0061-0001
2
052-0471-0001
2
—
—
—
.160
4.06
.095
2.41
.281
7.14
.281
7.14
.217
5.51
.217
5.51
.160
4.06
.145
3.68
.281
7.14
.375
9.53
.217
5.51
.313
7.95
—
—
—
—
—
Solder Pot
Contact Tail
Straight Pin
Contact Tail1
SOS-93 Series (93 Ohm)
032-0042-0001
2
032-0058-0001
3
032-0077-0001
1
032-0084-0001
1
052-0061-0001
2
052-0471-0001
2
—
—
—
.160
4.06
.095
2.41
.281
7.14
.281
7.14
.217
5.51
.217
5.51
—
Turret Pin
Contact Tail
.134
3.40
.134
3.40
.154
3.91
—
—
Solder Pot
Contact Tail
Straight Pin
Contact Tail1
Lockwasher supplied in place of solder lug.
1
100
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Slide-On Series (Continued)
Jacks
A
.520
[13.21]
A
.375
Hex.
[9.53]
Ø .250
[6.35]
Lock Washer
Mounting Nut
Fig. 1
Fig. 2
Mounting Hole
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
.088
2.24
.088
2.24
408-08531
RF-ASMB-104
010-0007-0000
408-08531
RF-ASMB-104
010-0007-0000
.810
20.57
.108
2.74
408-08531
RF-ASMB-104
010-0036-0000
.810
20.57
.980
24.89
1.100
27.94
.750
19.05
.134
3.40
.134
3.40
.154
3.91
.154
3.91
408-08530
RF-ASMB-103
010-1008-0000
408-08530
RF-ASMB-103
010-1008-0000
.305 [7.75] Dia. Over B.R. Cap
408-08532
RF-ASMB-105
—
Hex Nut Cable Clamp
408-08524
RF-ASMB-92
—
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
Fig.
Dim.
A
Cable
Jacket
Max.
031-0053-0001
1
031-0054-0001
2
.800
20.32
.970
24.64
1
031-0063-0001
1
031-0064-0001
2
031-0093-0001
1
031-0094-0001
2
Part No.
Ø .313
[7.95]
Min.
.375
Hex.
[9.53]
Special Features
SOS-50 Series (50 Ohm)
SOS-70 Series (70 Ohm)
031-0095-0001
SOS-93 Series (93 Ohm)
Right-Angle Plugs
A
B
Coaxial
Connectors
Ø .250
[6.35]
Part No.
Dim.
A
Dim.
B
Cable
Max.
O.D.
.735
18.67
.545
13.84
.092
2.34
408-08520
RF-ASMB-87
010-0016-0000
.745
18.92
.545
13.84
.111
2.82
408-08520
RF-ASMB-87
010-0016-0000
.745
18.92
.745
18.92
.605
15.37
.605
15.37
.134
3.40
.155
3.94
408-08520
RF-ASMB-87
010-0017-0000
408-08520
RF-ASMB-87
010-0017-0000
Special Features
SOS-50 Series (50 Ohm)
032-0063-0001
SOS-70 Series (70 Ohm)
032-0062-0001
4
SOS-93 Series (93 Ohm)
032-0059-0001
032-0083-0001
101
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Slide-On Series (Continued)
Receptacles
A
A
B Max.
Panel
B Max.
Panel
ØE
Min.
D Hex.
D Hex.
Solder Pot
Turret
Mounting
Nut
Solder Lug
Mounting
Nut
Solder Lug
Fig. 1
Fig. 2
A
A
Mounting Hole
for Fig. 1 & 2
.245
[6.22]
.100 ± .005
[2.54 ± 0.13] Typ.
B
D
Ø .037 Typ.
[.940]
Ø .037 Typ.
[.940]
Fig. 3
Dim.
Dim.
A
B
SOS-50 (50 Ohm), SOS-70 (70 Ohm), & SOS-93 (93 Ohm) Series
.715
.160
031-0049-0001
1
18.16
4.06
.340
.155
031-0060-0001
3
8.64
3.94
.340
.250
031-0065-0001
3
8.64
6.35
.425
.155
031-0070-0001
4
10.79
3.94
.715
.160
051-0258-0001
2
18.16
4.06
.570
.140
051-0325-0001
1
14.48
3.56
Part No.
Fig.
Ø .055 Min.
[1.40] Typ.
C
C
.200 ± .005
[5.08 ± 0.13]
Typ.
Fig. 4
Dim.
C
.250
6.35
.330
8.38
.330
8.38
.330
8.38
.250
6.35
.250
6.35
Dim.
D
Dim.
E
Hex.
.281
7.14
.217
5.51
Dia.
—
—
Dia.
—
—
Dia.
Hex.
.540
13.72
.281
7.14
Hex.
—
Mounting Pattern
for Fig. 3 & 4
Special Features
—
.217
5.51
.216-32
5.49 Thd.
No Nut or Lockwasher, Threads into Panel
102
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Quick-Connect Series
Jack
Plug
QC-50 Ohm Series
032-0002-0001
032-0030-0001
QC-70 Ohm Series
032-0016-0001
032-0031-0001
032-0079-0001
QC-93 Ohm Series
032-0012-0001
032-0032-0001
032-0072-0001
QC-50 Ohm Series
031-0038-0001
QC-70 Ohm Series
QC-93 Ohm Series
031-0040-0001
QC-70 Ohm Series
031-0057-0001
QC-93 Ohm Series
031-0058-0001
031-0085-0001
QC-70 Ohm Series
031-0004-0001
031-0005-0001
031-0006-0001
051-0586-0001
QC-93 Ohm Series
031-0020-0001
031-0021-0001
Receptacle
QC-50 Ohm Series
031-0057-0001
Right-Angle Plug
QC-50 Ohm Series
032-0026-0001
QC-70 Ohm Series
032-0027-0001
QC-93 Ohm Series
032-0020-0001
052-0228-0001
Coaxial
Connectors
Receptacle
QC-50 Ohm Series
031-0004-0001
031-0005-0001
031-0006-0001
051-0586-0001
4
103
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Quick-Connect Series (Continued)
Straight Plugs
A
B
Part No.
Dim.
A
Dim.
B
Cable
Jacket
Max.
.820
20.83
.820
20.83
.250
6.35
.250
6.35
.093
2.36
.093
2.36
.830
21.08
.830
21.08
.840
21.34
.250
6.35
.250
6.35
.250
6.35
.093
2.36
.093
2.36
.108
2.74
.845
21.46
.845
21.46
1.050
26.67
.312
7.92
.312
7.92
.312
7.92
.134
3.40
.134
3.40
.154
3.91
Special Features
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-08527
RF-ASMB-100
010-0007-0000
408-08526
RF-ASMB-97
010-0007-0000
408-08527
RF-ASMB-100
010-0007-0000
408-08529
RF-ASMB-102
010-0007-0000
408-08526
RF-ASMB-97
010-0036-0000
408-08527
RF-ASMB-100
010-0008-0000
408-08529
RF-ASMB-102
010-0008-0000
408-08523
RF-ASMB-90
—
QC-50 Series (50 Ohm)
032-0002-0001
032-0030-0001
Solderless Assembly
QC-70 Series (70 Ohm)
032-0016-0001
032-0031-0001
032-0079-0001
Solderless Assembly
QC-93 Series (93 Ohm)
032-0012-0001
032-0032-0001
032-0072-0001
Solderless Assembly
Mates with 031-0085-0001 Only
Right-Angle Plugs
A
C
ØB
Part No.
Dim.
A
Dim.
B
Dim.
C
Cable
Jacket
Max.
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
.735
18.67
.250
6.35
.605
15.37
.092
2.34
408-08520
RF-ASMB-87
010-0016-0000
.745
18.92
.250
6.35
.605
15.37
.111
2.82
408-08520
RF-ASMB-87
010-0016-0000
.745
18.92
.745
18.92
.312
7.92
.312
7.92
.635
16.13
.720
18.29
.134
3.40
.155
3.94
408-08520
RF-ASMB-87
010-0017-0000
408-08520
RF-ASMB-87
010-0017-0000
Special Features
QC-50 Series (50 Ohm)
032-0026-0001
QC-70 Series (70 Ohm)
032-0027-0001
QC-93 Series (93 Ohm)
032-0020-0001
052-0228-0001
Mates with
031-0085-0001 Only
104
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Quick-Connect Series (Continued)
Jacks
A
B
Part No.
Dim.
A
Dim.
B
Cable
Jacket
Max.
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
.750
19.05
.250
6.35
.093
2.36
408-08531
RF-ASMB-104
010-0007-0000
.760
19.30
.320
8.13
.134
3.40
408-08530
RF-ASMB-103
010-1009-0000
Special Features
QC-50 Series (50 Ohm)
031-0038-0001
QC-93 Series (93 Ohm)
031-0040-0001
Receptacles
A
A
B
Max. Panel
B
Max. Panel
F Min.
C Hex.
D Hex.
C Hex.
D Hex.
Mounting
Nut
Solder Lug
Solder Lug
Fig. 1
Fig.
Fig. 2
Dim.
B
Dim.
C
Dim.
D
Dim.
E
.095
2.41
.165
4.19
.250
6.35
.250
6.35
.165
4.19
.165
4.19
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.191
4.85
.191
4.85
.190-32 Thd
4.83
.191
4.85
.191
4.85
.095
2.41
.165
4.19
.160
4.06
.165
4.19
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.251
6.38
.251
6.38
.251
6.38
.251
6.38
—
—
Mounting Hole
Dim.
F
Special Features
—
No Mounting Flat
—
No Mounting Flat
—
No Nut or Solder Lug, Threads into Panel
Coaxial
Connectors
Dim.
A
QC-50 Series (50 Ohm) & QC-70 Series (70 Ohm)
.555
031-0004-0001
2
14.10
.555
031-0005-0001
2
14.10
.250
2
031-0006-0001
6.35
.605
031-0057-0001
1
15.37
.555
051-0586-0001
2
14.10
QC-93 Series (93 Ohm)
.555
031-0020-0001
2
14.10
.555
031-0021-0001
2
14.10
.605
031-0058-0001
1
15.37
.715
1
031-0085-0001
18.16
Part No.
EØ
Min.
Solder
Pot
Mounting
Nut
Turret
.173
4.39
—
No Mounting Flat, Split Solder Lug
—
No Mounting Flat
—
No Mounting Flat
4
.232
5.89
—
No Mounting Flat, Mates with
032-0072-0001 & 052-0228-0001 Only
105
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Twinax Series
Twinax Plugs:
For cables with two inner
conductors and one shield
A
A
B
B
Fig. 2
Screw-On Series
Fig. 1
Slide-On Series
Part No.
Fig.
Dim.
A
Dim.
B
032-0088-0001
1
032-0093-0001
1
052-0229-0001
2
052-0324-0001
2
1.085
27.56
1.085
27.56
1.085
27.56
1.095
27.81
.312
7.92
.312
7.92
.440
11.18
.440
11.18
Twinax Receptacles and
Jacks:
Cable
Jacket
Max.
.167
4.24
.123
3.12
.123
3.12
.167
4.24
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-08528
RF-ASMB-101
010-0031-0000
408-08528
RF-ASMB-101
010-0031-0000
408-08517
RF-ASMB-61
010-0172-0000
408-08517
RF-ASMB-61
010-0172-0000
Special Features
A
A
B Max.
Panel
B Max. Panel
C Hex.
D Hex.
C Hex.
Solder
Pot
Mounting Nut
Lockwasher Washer
D Hex.
Solder Pot
Lockwasher
Mounting Nut
Fig. 1
Slide-On Series
Fig. 2
Slide-On Series or Screw-On Series
A
B Max.
Panel
F Min.
D Hex.
C Hex.
E Ø Min.
Mounting Nut
Lockwasher
Fig. 3
Slide-On Series or Screw-On Series
Part No.
Fig.
Dim.
A
Dim.
B
Dim.
C
Dim.
D
Dim.
E
Dim.
F
Cable
Max.
Jacket
031-0098-0001
1
2
.155
3.94
.155
3.94
.0751
1.91
.2552
6.48
.375
9.53
.437
11.10
.437
11.10
.437
11.10
.375
9.53
.375
9.53
.500
12.7
.500
12.7
.313
7.95
.313
7.95
.376
9.55
.376
9.55
.292
7.42
.292
7.42
.351
8.92
.351
8.92
—
051-0248-0001
.812
20.62
.960
24.38
1.060
26.92
1.255
31.88
051-0358-0001
3
051-0389-0001
3
Mounting Hole
Special
Features
—
.167
4.24
.167
4.24
Lockwasher
not included
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
—
—
—
—
—
—
408-08516
RF-ASMB-44
010-0186-0000
408-08516
RF-ASMB-44
010-0186-0000
.075 [1.91] Max. Panel when mated with a Screw-On plug, .180 [4.57] Max. Panel when mated with a Slide-On plug.
.255 [6.48] Max. Panel when mated with a Screw-On plug, .360 [9.14] Max. Panel when mated with a Slide-On plug.
1
2
106
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Triax Series and Terminals
Triax Plugs:
A
For cables with one inner
conductor and two isolated
shields
B
Part No.
Dim.
A
Dim.
B
052-0130-0001
1.37
34.80
1.37
34.80
1.37
34.80
.440
11.18 Dia.
.440 Dia.
11.18
.438
11.13 Hex.
052-0138-0001
052-0593-0001
Cable
Jacket
Max.
.124
3.15
.183
4.65
.214
5.44
Special Features
Hex Nut w/ Safety Wire Holes,
.027 [.686] Wire Max.
Triax Receptacle:
Former
MICRODOT
I.S. No.
Assembly
Tool
408-08514
RF-ASMB-20
—
408-08515
RF-ASMB-21
—
408-08518
RF-ASMB-73
—
Triax Adapter:
1.11
[28.19]
.160 Max.
[4.06] Panel
.160 Max.
[4.06] Panel
Ø .438
Min.
[11.13]
1.09
[27.69]
Ø .501 Min.
[12.73]
0.56 Hex.
[14.22]
0.56 Hex.
[14.22] Nut
0.50
Hex.
[12.70]
Lockwasher
Instruction
Sheet No.
Mounting Nut
0.62
Hex.
[15.75]
Lockwasher
Part Number 051-0618-0001
Mounting Hole
Fig.
053-0354-0003
1
053-0249-0001
1
D
053-0495-0001
1
053-0656-0001
1
Fig. 1
053-0294-0002
1
033-0115-0002
2
033-0116-0001
2
033-0117-0001
2
053-0154-0001
1
Fig. 2
053-0250-0001
1
053-0020-0003
1
053-0021-0003
1
053-0267-0003
1
053-0265-0001
2
053-0230-0001
2
053-0155-0001
1
Terminals are gold plated.
See applicable MICRODOT
drawing for solder and crimp
instructions.
053-0022-0003
1
053-0388-0001
2
053-0251-0001
2
Mounting Hole
Dim.
A
Dim.
B
Dim.
C
Dim.
D
.030
.762
.030
.762
.030
.762
.030
.762
.030
.762
.040
1.02
.040
1.02
.040
1.02
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.042
1.07
.042
1.07
.080
2.03
.105
2.67
.125
3.18
.145
3.68
.145
3.68
.063
1.60
.094
2.39
.140
3.56
.080
2.03
.080
2.03
.080
2.03
.105
2.67
.105
2.67
.128
3.25
.128
3.25
.145
3.68
.145
3.68
.098
2.49
.098
2.49
.630
16.00
.630
16.00
.880
22.35
.880
22.35
.880
22.35
.255
6.48
.300
7.62
.350
8.89
.430
10.92
.505
12.83
.630
16.00
.630
16.00
.875
22.23
.505
12.83
.630
16.00
.430
10.82
.630
16.00
.500
12.70
.630
16.00
.375
9.53
.375
9.53
.610
15.49
.375
9.53
.625
15.88
.100
2.54
.100
2.54
.200
5.08
.175
4.45
.250
6.35
.375
9.53
.375
9.53
.625
15.88
.250
6.35
.375
9.53
.175
4.45
.375
9.53
.250
6.35
.375
9.53
Cable
Max.
Dielectric
.050
1.27
.071
1.80
.083
2.11
.108
2.74
.108
2.74
.042
1.07
.068
1.73
.108
2.74
.050
1.27
.050
1.27
.050
1.27
.071
1.80
.071
1.80
.102
2.59
.102
2.59
.108
2.74
.108
2.74
.065
1.65
.065
1.65
Cable Max.
Inner
Conductor
.015
.381
.021
.533
.022
.559
.023
.584
.023
.584
.023
.584
.023
.584
.023
.584
.019
.483
.019
.483
.015
.381
.023
.584
.023
.584
.021
.533
.018
.457
.023
.584
.023
.584
.021
.533
.021
.533
Coaxial
Connectors
Part No.
ØA
C
Mounting Nut
Part Number 053-0161-0001
Mates with Triax Plug, Both Ends
Terminals
ØB
.468
Min.
[11.89]
4
107
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Module Blocks
D
E
The five faces of basic
block can be used to mount
any one of 10 different terminations. The 5 faces are
coded with letters as shown
above. The 10 terminations
are coded with Nos. 1–10.
Part number, to be complete, must show face location and termination Nos.
.375
[9.53]
C
.242
[6.15]
A
B
desired. (Ex: illustration
shows 033-0042—A2—
B7—C6—D5—E1) Ordering
part number will be converted to a MICRODOT
assigned number at time of
ordering.
Size
Part No.
50 Ohm
033-0042*
70 Ohm
033-0043*
93 Ohm
033-0044*
Dim. H
.250
6.35
.250
6.35
.300
7.62
*Part number to be completed by
customer. A Computer Part Number
will be assigned by Tyco
Electronics.
We do not stock complete
assemblies.
Interfaces/Terminations
Termination
Number
Mating
Type
1
2
3
4
5
6
S
S
QC
QC
SOS
SOS
Description
Receptacle
Plug with
Knurl Nut
Receptacle
Plug
Receptacle
Plug
.320
[8.13]
.125
[3.18]
.345
[8.76]
.125
[3.18]
Ø
50 Series
70 Series
93 Series
Thread
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
Thread
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.290
[7.37]
.255
[6.48]
Ø
Dia.
.230
5.84
.255
6.48
.320
8.13
Ø
Dia.
.250
6.35
.250
6.35
.312
7.92
Dia.
.250
6.35
.250
6.35
.250
6.35
Interfaces/Terminations (Continued)
Termination
Number
Mating
Type
7
8
9
10
—
—
S
S
Description
Bulkhead Stud
Bulkhead
Receptacle
Plug with
Hex. Nut
Plug, Hex. Nut
With Wire Holes
.350
[8.89]
.160 Max.
[4.06] Panel
.420
[10.67]
Ø .191
Min.
[4.85]
.250
Hex.
[6.35]
.160 Max.
[4.06] Panel
Height
Min.
Turret
Ø .030
[.762]
3 Plcs.
Mounting Nut
Solder Lug
Solder Lug
93 Series
Hex.
Hex.
Mounting Nut
70 Series
Ø Min.
Hex.
.173
Min.
[4.39]
50 Series
.320
[8.13]
.320
[8.13]
Thread
Thread
Hex.
.190-32 UNF
4.83
.190-32 UNF
4.83
.190-32 UNF
4.83
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.250
6.35
.281
7.14
.312
7.92
Min. Hole
Dia.
.191
4.85
.217
5.51
.251
6.38
Min. Hole
Height
.173
4.39
.197
5.00
.232
5.89
Thread
Hex.
Thread
Hex.
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.250
6.35
.281
7.14
.312
7.92
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.250
6.35
.281
7.14
.312
7.92
108
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Caps, Hoods
Caps, Screw-On Series
0.20
[5.08]
For Receptacles and Jacks
Part No.
S-50 Series
0.13
[3.30]
ØA
Fig.
Dim. A
033-0046-0001
1
033-0056-0001
2
.235
5.97
.235
5.97
S-70 Series
Ø .094
[2.39]
033-0047-0001
1
033-0057-0001
2
Diamond Knurl
Fig. 1
With Grounding Pin
0.20
[5.08]
.255
6.48
.255
6.48
S-93 Series
0.12
[3.05]
033-0048-0001
1
033-0058-0001
2
.315
8.00
.315
8.00
Material — Brass per QQ-B-626
Finish — Silver plate per QQ-S-365,
.0002 [.005] min.
Note: All caps can be supplied with .094
[2.39] Dia. bead chain and end ring.
When ordering, specify chain length and
end ring hole size (.130 [3.30], .140
[3.56], .167 [4.24], or .193 [4.90] Dia.)
ØA
Ø .094
[2.39]
Diamond Knurl
Fig. 2
Without Grounding Pin
Receptacle Hoods
A
B
Hex.
033-0067-0001
033-0068-0001
033-0069-0001
033-0084-0001
053-0147-0001
Dim.
A
.490
12.45
.490
12.45
.490
12.45
.490
12.45
.840
21.34
Dim.
B
.250
6.35
.250
6.35
.312
7.92
.250
6.35
.437
11.10
Dim.
C
.098
2.49
.114
2.90
.156
3.96
.156
3.96
.156
3.96
Thread
For Receptacle Series
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.216-32 UNEF
5.49
.375-32 UNEF
9.53
S-50, QC-50, QC-70
Coaxial
Connectors
Part No.
ØC
S-70, SOS-50, SOS-70, SOS-93
S-93, QC-93
S-70, SOS-50, SOS-70, SOS-93
Twinax/Triax Receptacle
4
Material — Brass per QQ-B-626
Finish — Silver plate per QQ-S-365, .0002 [.005] min.
109
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Adapters
Feed-Thru Adapters
for Screw-On Series
A
.160 Max.
[4.06] Panel
A
B “X”
Hex.
“Y”
Ø .313
Min.
[7.95]
B
“Y” Hex.
Nut
B “X”
Hex.
Mounting Nut
Lockwasher
Fig. 1
Fig. 2
Part No.
Fig.
033-0001-0001
1
033-0053-0001
2
033-0023-0001
1
033-0054-0001
2
033-0036-0001
1
033-0055-0001
2
Dim.
A
.300
7.62
.600
15.24
.400
10.16
.600
15.24
.410
10.41
.600
15.24
End “Y” Is
S-50 Receptacle
S-50 Receptacle
S-50 Receptacle
S-50 Receptacle
S-70 Receptacle
S-70 Receptacle
S-70 Receptacle
S-70 Receptacle
S-93 Receptacle
S-93 Receptacle
S-93 Receptacle
S-93 Receptacle
.469
Min.
[11.91]
Mounting Hole
End “A” Is:
Configuration
A
BNC Plug
A
A
BNC
Receptacle
BNC Bulkhead
Receptacle
End “X” Is
.501
[12.73]
Min.
For mating BNC/TNC
connectors to MICRODOT
standard connectors.
BNC
Receptacle
Mounting Hole
Dim.
B
.250
6.35
.375
9.53
.250
6.35
.375
9.53
.312
7.92
.375
9.53
BNC and TNC/MICRODOT
Adapters for Screw-On,
Slide-On, and QuickConnect Series
BNC Plug
.294
[7.47]
Min.
A
A
B
B
B
B
B
End “B” Is:
50 Series
Part No.
70 Series
Part No.
93 Series
Part No.
Screw-On (S)
Type Plug
033-0103-0001
033-0107-0001
033-0111-0001
Screw-On
Type
Receptacle
033-0101-0001
033-0105-0001
033-0109-0001
Screw-On (S)
Type Plug
033-0104-0001
053-0108-0001
033-0112-0001
Screw-On (S)
Type
Receptacle
033-0102-0001
033-0106-0001
033-0110-0001
Screw-On (S)
Type Plug
033-0127-00011
—
033-0129-00011
Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29].
1
110
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Standard Connectors — Adapters (Continued)
BNC and TNC/MICRODOT
Adapters for Screw-On,
Slide-On, and QuickConnect Series (Continued)
.501
[12.73]
Min.
.469
Min.
[11.91]
Mounting Hole
End “A” Is:
BNC Bulkhead
Receptacle
Configuration
A
B
End “B” Is:
50 Series
Part No.
70 Series
Part No.
93 Series
Part No.
Screw-On (S)
Type
Receptacle
033-0090-00011
033-0125-00011
033-0126-00011
TNC Plug
A
B
Screw-On (S)
Type
Receptacle
033-0141-0001
033-0143-0001
033-0145-0001
TNC
Receptacle
A
B
Screw-On (S)
Type
Receptacle
033-0153-0001
—
—
BNC
Plug
A
B
Slide-On (SOS)
Type Plug
053-0339-0001
053-0339-0001
053-0339-0001
A
B
Slide-On (SOS)
Type
Receptacle
033-0081-0001
033-0081-0001
033-0081-0001
BNC
Receptacle
A
B
Slide-On (SOS)
Type Plug
033-0092-0001
033-0092-0001
033-0092-0001
BNC
Receptacle
A
B
Slide-On (SOS)
Type
Receptacle
033-0082-0001
033-0082-0001
033-0082-0001
BNC
Bulkhead
Receptacle
A
B
Slide-On (SOS)
Type
Receptacle
033-0124-00011
033-0124-00011
033-0124-00011
BNC
Plug
A
B
Quick-Connect
(QC) Type
Receptacle
033-0093-0001
033-0093-0001
033-0097-0001
BNC
Receptacle
A
B
Quick-Connect
(QC) Type
Receptacle
033-0094-0001
033-0094-0001
—
Coaxial
Connectors
BNC
Plug
4
Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29].
1
111
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Gold Plated Crimp Style Coaxial Connectors
Performance Data
Summary
For Gold Plated Crimp Style
Coaxial Connectors
Mechanical
Captive Contacts — Terminated connector contacts captivated from movement in both directions.
Cable Retention —
50 Ohm connectors, 15 lb. min.
70 Ohm connectors, 25 lb. min.
93 Ohm connectors, 25 lb. min.
Recommended Coupling Torque
(Threaded Interface) —
8 inch/pounds max. [.904 Nm]
Recommended Receptacle
Mounting Torque (Threaded
Interface) — 8 inch/pounds max.
[.904 Nm]
Contact Protection (Unmated) —
Pin contact protected by coupling nut.
Socket protected by insulator and
housing.
Assembly Methods
Straight Plugs & Jacks — Cable
Inner Conductor: Crimped to contact.
Cable Shield: Crimped under housing.
Right-Angle Plugs — Cable Inner
Conductor: Crimped to contact. Cable
Shield: Crimped under housing.
Environmental
Temperature Range (Continuous
Service) — -80°F to +392°F.
[-62°C to +200°C].
Vibration1,2 — MIL-STD-202, Method
204, Test condition B (15 G peak). No
physical damage or electrical discontinuities in excess of 1 microsecond.
Shock1,2 — MIL-STD-202, Method
213, Test Condition H. No physical damage or electrical discontinuity after
shock.
Thermal Shock — MIL-STD-202,
Method 107, Test Condition C.
Moisture Resistance1 — MIL-STD202, Method 106.
Salt Spray1 — MIL-STD-202, Method
101, Test Condition B (48 hours).
Electrical
Impedance — Designed to be compatible with 50, 70, or 93 Ohm miniature
coaxial cable.
Dielectric Withstanding Voltage —
1000 volts RMS at sea level.
Contact Resistance — 4 milliohms
max., D.C.
Contact Capacity — 3 amps, D.C.
Insulation Resistance — 5 x 103
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio3
(VSWR) — Typical 50 Ohm series, 1.2
max. to 2 GHz.
Materials
Housing, Nut, Inner Sleeve —
Brass per ASTM-B-16, 35% Zinc.
Insulator — TEFLON per
ASTM-D-1710.
Pin & Socket Contacts — Beryllium
Copper per ASTM-B-196.
Middle Sleeve — Copper Alloy.
Facial Seal4, Sealing Sleeve &
Gasket — Silicone Rubber per
ZZ-R-765.
Lockwasher — #425 Bronze Alloy.
Plating
Contacts, Housing, Nut,
Inner Sleeve, Middle Sleeve,
Lockwasher — Gold per MIL-G-45204,
Type II, Grade C, Class 1.
NOTES:
1
Screw-On Series threaded interface.
2
Tyco Electronics recommends the
use of wired connectors in vibration
and shock environments. See individual specifications for connectors
with wire holes.
3
VSWR is a system specification.
Where performance is critical,
purchase Tyco Electronics cable
assemblies (See page 127) and
specify VSWR testing and mating
connector part numbers.
112
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Gold Plated Crimp Style Coaxial Connectors — Screw-On Series
Straight Plugs
A
A
B
Hex.
ØB
Fig. 1
Partial Hex. Nut
Fig. 2
Knurl Nut
A
A
B
Hex.
B
Hex.
Fig. 3
Full Hex. Nut
Dim.
A
Dim.
B
Cable
Max.
.800
20.32
.800
132-0112-0002
2
20.32
.800
132-0112-0003
3
20.32
.800
132-0112-0004
4
20.32
.800
132-0113-0001
1
20.32
.800
132-0113-0002
2
20.32
.800
132-0113-0003
3
20.32
.800
132-0113-0004
4
20.32
.800
132-0114-0001
1
20.32
.800
132-0114-0002
2
20.32
.800
132-0114-0003
3
20.32
.800
132-0114-0004
4
20.32
.800
1
132-0115-0001
20.32
.800
132-0115-0002
2
20.32
.800
132-0115-0003
3
20.32
.800
4
132-0115-0004
20.32
.800
132-0509-0002
2
20.32
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
.800
132-0200-0001
1
20.32
.800
132-0200-0002
2
20.32
.800
132-0200-0003
3
20.32
.800
132-0200-0004
4
20.32
.800
1
132-0201-0001
20.32
.800
2
132-0201-0002
20.32
.800
132-0201-0003
3
20.32
.800
132-0201-0004
4
20.32
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.116
2.95
.281
7.14
.290
7.37
.281
7.14
.281
7.14
.281
7.14
.290
7.37
.281
7.14
.281
7.14
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
Part No.
Fig.
Fig. 4
Hex. Nut w/ 3 Safety Wire Holes
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
Dual shield cable version
of RG 188 & 316
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
Special Features
50 Ohm Series .190 [4.83] -32 UNF-2B Thread
132-0112-0001
1
Coaxial
Connectors
4
113
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Straight Plugs (Continued)
Part No.
Dim.
A
Dim.
B
Cable
Max.
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.312
7.92
.320
8.13
.312
7.92
.312
7.92
.312
7.92
.320
8.13
.312
7.92
.312
7.92
.155
3.94
.155
3.94
.155
3.94
.155
3.94
.155
3.94
.155
3.94
.155
3.94
.155
3.94
Fig.
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
With environmental seal
408-08508
RF-ASMB-8
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
408-08509
RF-ASMB-11
408-08509
RF-ASMB-11
408-08509
RF-ASMB-11
408-08509
RF-ASMB-11
408-08509
RF-ASMB-11
408-08509
RF-ASMB-11
408-08509
RF-ASMB-11
408-08509
RF-ASMB-11
Special Features
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
132-0300-0001
1
132-0300-0002
2
132-0300-0003
3
132-0300-0004
4
132-0301-0001
1
132-0301-0002
2
132-0301-0003
3
132-0301-0004
4
ØB
Right-Angle Plugs
C
A
Knurl Nut
Part No.
Dim.
A
Dim.
B
50 Ohm Series .190 [4.83] -32 UNF-2B Thread
.660
.250
132-0116-0002
16.76
6.35
.660
.250
132-0117-0002
16.76
6.35
.695
.250
132-0118-0002
17.65
6.35
.695
.250
132-0119-0002
17.65
6.35
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
.695
.290
132-0202-0002
17.65
7.37
.695
.290
132-0203-0002
7.37
17.65
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
.710
.320
132-0302-0002
8.13
18.03
.710
.320
132-0303-0002
8.13
18.03
Dim.
C
Cable
Jacket
Max.
.620
15.75
.620
15.75
.650
16.51
.650
16.51
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.650
16.51
.650
16.51
.110
2.79
.110
2.79
.680
17.27
.680
17.27
.155
3.94
.155
3.94
Special Features
With environmental seal
With environmental seal
With environmental seal
With environmental seal
114
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Jacks
B
B
Hex.
C Max.
Panel
.375 Hex.
[9.53] Nut
Mounting Nut
Fig. 1
Part No.
Fig.
Dim.
A
50 Ohm Series .190 [4.83] -32 UNF-2B Thread
.770
131-0134-0001
1
19.56
.770
2
131-0135-0001
19.56
.770
131-0136-0001
1
19.56
.770
131-0137-0001
2
19.56
.770
131-0150-0001
1
19.56
.770
131-0151-0001
2
19.56
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
.770
131-0200-0001
1
19.56
.770
131-0201-0001
2
19.56
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
.760
131-0300-0001
1
19.30
.760
131-0301-0001
2
19.30
Ø .313 Min.
[7.95]
A
Dim.
B
.250
6.35
.360
9.14
.250
6.35
.360
9.14
.250
6.35
.360
9.14
.281
7.14
.360
9.14
.312
7.92
.350
8.89
.375
Hex.
[9.53]
Lockwasher
Fig. 2
Dim.
C
Cable
Jacket
Max.
—
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.116
2.95
.116
2.95
.105
2.67
—
.105
2.67
—
.105
2.67
—
.100
2.54
—
.095
2.41
.292
Min.
[7.42]
Mounting Hole
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
.110
2.79
.110
2.79
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
.155
3.94
.155
3.94
408-08508
RF-ASMB-8
408-08508
RF-ASMB-8
Special Features
Dual Shield Cable
Version of RG 188 & 316
Dual Shield Cable
Version of RG 188 & 316
Coaxial
Connectors
4
115
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Receptacles
A
B Max.
Panel
A
B Max.
Panel
D
Hex.
C
Solder Lug
Mounting Nut
Fig. 1
Mounting Hole
for Fig. 1 & 2
Fig. 2
A
B
.245
[6.22]
B
A
F
Min.
Solder
Pot
Turret
Mounting Nut
Solder Lug
Ø E Min.
D
Hex.
C
.200 ± .005
[5.08 ± 0.13]
Typ.
.100 ± .005
[2.54 ± 0.13]
C
Typ.
D
C
Ø .055 Min.
[1.40] Typ.
Ø .037 Typ.
[0.94]
Ø .037 Typ.
[0.94]
Fig. 3
Dim.
A
50 Ohm Series .190 [4.83] -32 UNF-2A Thread
.605
131-0138-0002
1
15.37
.515
131-0139-0002
2
13.08
.255
131-0140-0001
2
6.48
.340
131-0141-0002
3
8.64
.425
131-0142-0002
4
10.80
70 Ohm Series .216 [5.49] -32 UNEF-2A Thread
.605
131-0202-0002
1
15.37
.340
131-0705-0001
3
8.64
93 Ohm Series .250 [6.35] -32 UNEF-2A Thread
.340
131-0303-0002
3
8.64
.425
131-0304-0001
4
10.80
.605
1
131-0904-0001
15.37
Part No.
Fig.
Gold Plated Crimp Style
Coaxial Connectors
Assembly Tools
Dim.
B
Dim.
C
Dim.
D
Dim.
E
Dim.
F
.160
4.06
.150
3.81
.250
6.35
.250
6.35
.191
4.85
.191
4.85
.173
4.39
—
No Mounting Flat
—
.190 -32 Thd.
4.83
—
No Nut or Solder Lug, Threads into Panel
.155
3.94
.155
3.94
.250
6.35 Hex.
.187 Wrench Flats
4.75
.187 Wrench Flats
4.75
.330 Dia.
8.38
.330
8.38 Dia.
.160
4.06
.155
3.94
.250
6.35 Hex.
.330
8.38 Dia.
.155
3.94
.155
3.94
.160
4.06
.330 Dia.
8.38
.330
8.38 Dia.
.312
7.92 Hex.
—
—
—
—
.480
12.19
—
—
.281
7.14
.217
5.51
.197
5.00
—
—
—
—
—
—
.480
12.19
.312
7.92
—
—
.251
6.38
.232
5.89
Table 1. Contact Crimp Tools
MICRODOT Part No.
010-0065-0000
Special Features
Table 2. Housing Crimp Tools
Manufacturers Part No.
Astro Tool A-810-3
Pin
Contact
Sealing
Sleeve
Mounting Pattern
for Fig. 3 & 4
Fig. 4
Housing
Insulator
MICRODOT
Part No.
010-0081-0000
010-0082-0000
010-0083-0000
Max. Cable
Diameter
.088 [2.24]
.110 [2.79]
.155 [3.94]
Housing Sub-assembly
Plug
Inner
Sleeve
Middle
Sleeve
Thomas & Betts
Part No.
WT-400
WT-402
WT-406
Cable
Insulator
Jack
Socket
Contact
Housing
Insulator
Housing
Gasket
116
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors
Performance Data Summary
For LEPRA/CON Connectors
Mechanical
Environmental
Captive Contacts — Terminated connector contacts captivated from movement in both directions.
Cable Retention —
10 lb. min. when properly assembled to
RG196/U and RG178/U cable.
Recommended Coupling Torque
(Threaded Interface) —
24 inch/ounces max.
Recommended Receptacle
Mounting Torque (All Series) —
24 inch/ounces max.
Typical Cable Acceptance
Dimensions — Inner conductor: .012
[0.31] nom. Dielectric: .039 [0.99] max.
Shield: .059 [1.50] max. Jacket: .081
[2.06] max.
Contact Protection (Unmated) —
Twist pin contact protected from damage
by insulator. Tube socket protected by
connector housing.
Temperature Range (Continuous
Service) — -85°F to +392°F
[-65°C to +200°C].
Vibration1,2 — MIL-STD-202, Method
204, Test Condition B (15 G peaks). No
physical damage or electrical discontinuities in excess of 1 microsecond.
Shock1,2 — MIL-STD-202, Method
213, Test Condition H. No physical damage or electrical discontinuity after
shock.
Thermal Shock — MIL-STD-202,
Method 107, Test Condition C.
Moisture Resistance1 — MIL-STD202, Method 106.
Salt Spray1 — MIL-STD-202, Method
101, Test Condition B (48 hours).
Assembly Methods
Straight Plugs & Jacks — Cable
Inner Conductor: Crimped to contact.
Cable Shield: Crimped under housing.
Right-Angle Plugs — Cable Inner
Conductor: Soldered to contact. Cable
Shield: Crimped under housing.
Electrical
Impedance — Designed to be compatible with 50 Ohm coaxial cable
RG178/U.
Dielectric Withstanding Voltage —
450 volts RMS at sea level, 250 volts
RMS at 50,000 ft [15,240 m], 150 volts
RMS at 70,000 ft. [21,336 m]
Contact Resistance — 8 milliohms
max., D.C.
Contact Capacity — 3 amps, D.C.
Insulation Resistance — 104
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio3
(VSWR) — Typical 50 Ohm Series, 1.2
Maximum to 2 GHz.
Materials
Housing, Nut, Ferrule — Brass per
ASTM-B-16.
Insulator — TEFLON per
ASTM-D-1710.
Pin & Socket Contact — Copper
Alloy.
Crimp Sleeve — Copper Alloy.
Lockwasher — #425 Bronze Alloy.
Plating
Contacts, Housing, Nut, Ferrule,
Crimp Sleeve, Lockwasher —
Gold per MIL-G-45204, Type II, Grade
C, Class 1.
Notes:
1
Screw-On Series, threaded interface.
2
Tyco Electronics recommends the
use of safety wired connectors in
vibration and shock environments.
See individual specifications with
wire holes.
3
VSWR is a system specification.
Where performance is critical,
purchase Tyco Electronics cable
assemblies with Screw-On connectors (See page 129) and specify
VSWR testing and mating
connector part numbers.
Coaxial
Connectors
4
117
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors — Screw-On Series
Featuring Twist Pin,
Pin and Socket Contacts,
Standard Interface
MICRODOT twist pin, pin
and socket contacts are
used in LEPRA/CON connectors. Twist pin contact
pins are produced from
beryllium copper material
with a gold-plated finish and
constructed with helicallywound stress free cable of
spring copper around a
highly conductive soft copper core, terminated with a
hemispherical weld. Twist pin
contacts contain seven selfwiping spring surfaces,
designed for consistent
continuity and very low
noise level. Twist pin contacts are self-aligning
because of the contactengaging-end configuration.
The sockets are a closed
entry tubular-type contact,
made of gold-plated
copper alloy.
The connectors are
designed to be used with
coaxial cables RG196/U
and RG178/U.
The connectors are
designed with the contacts
completely protected for
reliability. The use of twist
pin contacts makes the
connectors very rugged for
their size.
Solder Center
Conductor to Contact
.015
Dia.
[0.38]
3 Places
(142-0000-0003 Only)
.395
[10.03]
.015 Dia.
[0.38]
3 Places
(142-0002-0003 Only)
.380
[9.65]
.125-44UNF-2B
[3.18] (Modified)
.580
[14.73]
.125 -44UNF-2B
[3.18] (Modified)
Straight Plugs1
Part No.
142-0000-0001
142-0000-0002
142-0000-0003
Right-Angle Plug1
Nut Style
.156 [3.96] Hex.
.160 [4.06] Dia. Knurl
.156 [3.96] Hex. w/ Safety Wire Holes
Part No.
142-0002-0001
142-0002-0002
142-0002-0003
Assembly instructions: RF-ASMB-12
Assembly instructions: RF-ASMB-13
.125-44UNF-2A
[3.18] (Modified)
.580
[14.73]
.270
[6.86]
.270
[6.86]
.156
[3.96]
Hex. Stk.
Nut Style
.156 [3.96] Hex.
.160 [4.06] Dia. Knurl
.156 [3.96] Hex. w/ Safety Wire Holes
.156
[3.96]
Hex. Stk.
Jack1
Part Number 141-0000-0001
Instruction Sheet Number 408-08510
Former MICRODOT I.S. Number RF-ASMB-12
.580
[14.73]
.093 Max.
[2.36] Panel
.125-44UNF-2A
[3.18] (Modified)
Bulkhead Jack1
Part Number 141-0001-0001
Instruction Sheet Number 408-08510
Former MICRODOT I.S. Number RF-ASMB-12
.125-44UNF-2A
[3.18] (Modified)
.425
[10.80]
.022 Solder Pot
[0.56] I.D.
.156
2 Plcs.
[3.96]
.093 Max.
[2.36] Panel
.260
[6.60]
.022
Turret I.D.
[0.56]
Turret
.140
[3.56]
.156
[3.96]
2 Plcs.
.093 Max.
[2.36] Panel
.425
[10.80]
.125-44UNF-2B
[3.18] (Modified)
Front Mount Receptacle1
Part No.
141-0002-0001
141-0002-0002
.022
Solder Pot I.D.
[0.56]
Rear Mount Receptacle1
Contact Tail
Turret
Solder Pot
Part No.
141-0003-0001
141-0003-0002
Contact Tail
Turret
Solder Pot
Mounting hole pattern and assembly tools shown on page 123.
1
118
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts,
Standard Interface (Continued)
.225
[5.72]
.125-44UNF-2A
[3.18] (Modified)
.172
[4.37]
.026 Dia.–Typ.
[.660]
Straight Printed Circuit Receptacle1
Part No. 141-0004-0001
.370
[9.40]
Cavity Potted
With Epoxy
Cavity Potted
With Epoxy
.370
[9.40]
.120
[3.05]
.385
[9.78]
.385
[9.78]
.125-44UNF-2A
Thd.
[3.18] (Modified)
.125-44UNF-2A
Thd.
[3.18] (Modified)
.172
[4.37]
.172
[4.37]
.026 Dia.
[6.60] 5 Plcs.
.120
[3.05]
.026 Dia.
[6.60] Typ.
Shipping Fixture
Right-Angle Printed Circuit Receptacle1
(Small Mounting Pattern)
Part Number 141-0019-0001
Right-Angle Printed Circuit Receptacle1
(Standard Mounting Pattern)
Part Number 141-0010-0001
.545
[13.84]
.205
[5.21]
.080 Max.
[2.03] Panel
.125 -UNF44-2A Thd.
[3.18] (Modified)
Both Ends
.202
[5.13]
Min.
.217
[5.51]
.216-32 UNF
[5.49] Thd.
.250 Hex.
[6.35] 2 Plcs.
.156
[3.96]
Hex.
Coaxial
Connectors
Feed-Thru Bulkhead Adapter
(Both Ends are Receptacle Interface)
Part Number 143-0005-0001
.125-44 UNF-2A
[3.18] (Modified)
.275
[6.99]
.093 Max.
[2.36] Panel
.490
[12.45]
.156
[3.96]
Sq.
.285
[7.24]
4
Straight Plug
.115
[2.92]
Cavity Filled
With Epoxy
Right-Angle Receptacle1
Part Number 141-0013-0001
Mounting hole pattern and assembly tools shown on page 123.
1
119
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts
with Locking Interface
The MICRODOT LEPRA/CON
coaxial connector series is
now offered with a unique
locking interface feature.
This new coupling design
permits the user to lock the
coaxial plug, when mated to
its receptacle, preventing
any axial rotation. This
adaptation is especially
popular on connector installations requiring straight or
90° cable terminations firmly held in a fixed position.
The locking interface is
especially suited for
telecommunications and
instrumentation applications.
Solder Center
Conductor to Contact
.395
[10.03]
.015 Dia. 3 Plcs.
[0.38] (142-0010-0003 Only)
.125-44UNF-2B
[3.18] (Modified)
.380
[9.65]
.125-44UNF-2B
[3.18] (Modified)
.580
[14.73]
Straight Plug1
Part No.
142-0010-0001
142-0010-0002
142-0010-0003
.015 Dia. 3 Plcs. Ref.
[0.38] (142-005-0003 Only)
Right-Angle Plug1
Nut Style
.156 [3.96] Hex.
.160 [4.06] Dia. Knurl
.156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-12, 142-0010-0001
Part No.
142-0005-0001
142-0005-0002
142-0005-0003
Nut Style
.156 [3.96] Hex.
.160 [4.06] Dia. Knurl
.156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-13, 142-0005-0001
Assembly tools; page 123.
1
120
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts
with Locking Interface
(Continued)
.590
[14.99]
.156
[3.96]
.590
[14.99]
.285
[7.24]
.125-44UNF-2A
[3.18] (Modified)
.125-44UNF-2A
[3.18] (Modified)
.156 2 Plcs.
[3.96]
Straight Jack1
Part Number 141-0017-0001
Instruction Sheet Number 408-08510
Former MICRODOT I.S. Number RF-ASMB-12
.125-44UNF-2A
[3.18] (Modified)
.093 Max.
[2.36] Panel
Bulkhead Jack1
Part Number 141-0014-0001
Instruction Sheet Number 408-08510
Former MICRODOT I.S. Number RF-ASMB-12
.022 Solder Pot
[.559] I.D.
.156 Hex.
[3.96] 2 Plcs.
.022 Solder Pot
[.559] I.D.
Turret
.156 2 Plcs.
[3.96]
Turret
.155
[3.94]
.275
[6.99]
.093 Max.
[2.36] Panel
.125-44UNF-2A Thd.
[3.18] (Modified)
.440
[11.18]
Front Mount Receptacle1
Part No.
141-0012-0001
141-0012-0002
.093 Max.
[2.36] Panel
.440
[11.18]
Rear Mount Receptacle w/ Locking Interface1
Contact Tail
Solder Pot
Turret
Part No.
141-0011-0001
141-0011-0002
.240
[6.10]
Contact Tail
Turret
Solder Pot
.172
[4.37]
.125-44UNF-2A
[3.18] (Modified)
.156
[3.96]
.026 Dia.
[0.66] Typ.
.125-44UNF-2A
[3.18] (Modified)
Coaxial
Connectors
.275
[6.99]
Straight Printed Circuit Receptacle1
Part Number 141-0015-0001
.093 Max.
[2.36] Panel
.490
[12.45]
.385
[9.78]
Cavity Potted
With Epoxy
.120
[3.05]
.115
[2.92]
Cavity Filled
With Epoxy
.156
Sq.
[3.96]
.300
[7.62]
4
.385
[9.78]
.125-44UNF-2A
[3.18] (Modified)
.172
[6.77]
Right-Angle Receptacle1
Part Number 141-0020-0001
.026 Dia.
[.660] 5 Plcs.
Shipping Fixture
Right-Angle Printed Circuit Receptacle1
Part Number 141-0023-0001
Mounting hole pattern and assembly tools shown on page 123.
1
121
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors — Slide-On Series
LEPRA/CON Slide-On
Connectors offer a convenient mating style along with
Ultra-miniature size. Inner
contacts are twist pin tubular
sockets in plugs and twist
pin contacts for jacks
and receptacles. Positive
housing contact is provided
by a three finger contact in
the plug housing.
Featuring Twist Pin,
Pin and Socket Contacts
.125
[3.18]
.610
[15.49]
.125
Dia.
[3.18]
.440
[11.18]
Straight Plug1
Part Number 142-1000-0001
Instruction Sheet Number 408-08512
Former MICRODOT I.S. Number RF-ASMB-15
.380
[9.65]
Right-Angle Plug1
Part Number 142-1002-0001
Instruction Sheet Number 408-08513
Former MICRODOT I.S. Number RF-ASMB-16
.250 Hex.
[6.35] 2 Plcs.
.190 -32UNF-2 Thd.
[4.83]
.640
[16.26]
.335
[8.51]
.140 Max.
[3.56] Panel
.265
[6.73]
.093 Max.
[2.36] Panel
Ø .191
Min.
[4.85]
.445
[11.30]
Mounting
Hole
.490
[12.45]
Right-Angle Bulkhead Mount Plug1
Part Number 142-1021-0001
Instruction Sheet Number 408-08519
Former MICRODOT I.S. Number RF-ASMB-76
.156 Hex.
[3.96] 2 Plcs.
.125-44UNF-2A
[3.18] (Modified)
Straight Bulkhead Jack1
Part Number 141-1001-0001
Instruction Sheet Number 408-08512
Former MICRODOT I.S. Number RF-ASMB-15
.570
[3.99]
.220
[5.59]
.495
[12.57]
.022 Solder Pot
[0.56] I.D.
.093 Max.
[2.36] Panel
Turret
.125
Dia.
[3.18]
.125-44UNF-2
[3.18] (Modified)
Straight Jack1
Part Number 141-1000-0001
Instruction Sheet Number 408-08512
Former MICRODOT I.S. Number RF-ASMB-15
.156 Hex.
[3.96] 2 Plcs.
Front Mount Receptacle1
Part No.
141-1002-0001
141-1002-0002
Mounting hole and assembly tools shown on page 123.
1
Contact Tail
Turret
Solder Pot
122
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors — Slide-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts
(Continued)
.156
Hex.
[3.96]
.022 Solder Pot
[.559] I.D.
.275
.490 [6.99]
[12.45]
.125-44UNF-2A
[3.18] (Modified)
.335
[8.51]
.156
[3.96]
Hex. 2 Plcs.
Turret
.093 Max.
[2.36] Panel
.115
[2.92]
.495
[12.57]
.156
Sq.
[3.96]
Part No.
141-1003-0001
141-1003-0002
Cavity Filled
With Epoxy
.385
[9.78]
Rear Mount Receptacle
Right-Angle Receptacle
Mounting Hole Shown Below
Part Number 141-1012-0001
Contact Tail
Turret
Solder Pot
Mounting Hole shown below.
.425
[10.80]
.026
Dia. Typ
[0.66]
.385
[9.78]
.097 Dia.
[2.46]
.120
[3.05]
.172
[4.37]
.260
[6.60]
.172
[4.37]
.026
Dia. Typ.
[0.66]
Straight Printed Circuit Receptacle
Mounting Hole Pattern Shown Below
Part Number 141-1004-0001
.126
[3.20]
Min.
Right-Angle Printed Circuit Receptacle
Mounting Hole Pattern Shown Below
Part Number 141-1005-0001
.045–.055
Typ.
[1.14–1.40]
.095–.105 Typ.
[2.41–2.67]
.095–.105 Typ.
[2.41–2.67]
.114 Min.
[2.90]
.046 Dia. Min.
[1.17] 5 Holes
.195–.205 Typ.
[4.95–5.21]
Bulkhead Receptacle Mounting Hole
Coaxial
Connectors
.046 Dia. Min.
[1.17] 5 Holes
Small Pattern
Connectors 141-0019-0001
and 141-0023-0001 Only
Standard Pattern
Printed Circuit Receptacle Mounting Hole Pattern
LEPRA/CON Connector Assembly Tools
4
Contact Crimp Tool
Housing Crimp Tool
MICRODOT Part No.
010-0132-0000
Thomas & Betts Part No.
WT-419
Connector
Straight
Connector Only
141-1001-0001
Contact Crimp No.
Astro Tool Part No.
010-0150-0000
A-826-1
010-0161-0000
827
123
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors (Continued)
BNC / LEPRA/CON
Connector Adapters
.125-44UNF-2A
[3.18] (Modified)
End B
.125-44UNF-2A
[3.18] (Modified)
End A
End B
End A
.900
[22.86]
.850
[21.59]
End “B” is MICRODOT
End “A” is BNC Plug
Screw-On Plug
Part Number 143-0001-0001
.950
[24.13]
End “A” is BNC Receptacle
End “B” is MICRODOT
Screw-On Receptacle
Part Number 143-0003-0001
.125-44UNF-2B
[3.18] (Modified)
.125-44UNF-2A
[3.18] (Modified)
End B
End A
End A
End B
.865
[21.97]
End “A” is BNC Plug
End “B” is MICRODOT Screw-On Plug
with Locking Interface
Part Number 143-0029-0001
End “A” is BNC Receptacle
End “B” is MICRODOT Screw-On
Receptacle with Locking Interface
Part Number 143-0032-0001
.835
[21.21]
End B
End A
.125-44UNF-2A
[3.18] (Modified)
End A
End B
.785
[19.94]
End “B” is Screw-On Receptacle
End “A” is BNC Plug
Part Number 143-0002-0001
End “A” is BNC Plug
End “B” is MICRODOT
Slide-On Plug
Part Number 143-1000-0001
124
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors (Continued)
BNC / LEPRA/CON
Connector Adapters
(Continued)
.800
[20.32]
.900
[22.86]
.125-44UNF-2A
[3.18] (Modified)
End B
End A
End B
End A
End “A” is BNC Plug
End “B” is MICRODOT Receptacle with
Locking Interface
Part Number 143-0031-0001
End “A” is BNC Plug
End “B” is MICRODOT
Slide-On Receptacle
Part Number 143-1002-0001
.125-44UNF-2B
[3.18] (Modified)
End B
End A
End A
End B
.965
[24.51]
.900
[22.86]
End “A” is BNC Receptacle
End “B” is MICRODOT
Screw-On Plug
Part Number 143-0004-0001
End “A” is BNC Receptacle
End “B” is MICRODOT
Slide-On Plug
Part Number 143-1001-0001
.125-44UNF-2B
[3.18] (Modified)
End A
End A
End B
End B
Coaxial
Connectors
.965
[24.51]
1.015
[25.78]
End “B” is MICRODOT Screw-On Plug
with Locking Interface
Part Number 143-0030-0001
End “A” is BNC Receptacle
End “A” is BNC Receptacle
End “B” is MICRODOT
Slide-On Receptacle
Part Number 143-1003-0001
4
125
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
LEPRA/CON Ultra-Miniature Connectors — Snap-Lock Series
Product Facts
n
n
n
n
n
Simple coupling design
eliminates the need for
tools and saves assembly
time
Positive locking mechanism
provides its own fail-safe
features
Inspection of the mated connector is fast, simple and
effective
Push-Pull design allows
higher panel density
Quick-connect and disconnect features
Performance Data Summary
For Snap-Lock Connectors
Electrical
Environmental
Impedance — Designed to be compatible with 50 Ohm coaxial cables
(Dual Shield RG 196).
Dielectric Withstanding Voltage —
450 volts RMS at sea level (Operating).
Contact Resistance — 8 milliohms
max. at 3 amps. Average resistance: 4
milliohms
Insulation Resistance — 104
megohms min.
Voltage Standing Wave Ratio
(VSWR) — 3.4 max., 1.3 min. to 12 GHz.
Temperature Range —
-85°F to +257°F [-65°C to +125°C].
Vibration — MIL-STD-202, Method
204, Test condition D. No change in
electrical discontinuity in excess of 1
microsecond.
Shock — MIL-STD-202, Method 213A,
Test Condition C. No electrical discontinuity or evidence of physical damage.
.093 Max.
[2.36] Panel
.406
[10.31]
8-32 UNC-2A (Modified)
.219
[5.56]
.093 Max.
[2.36] Panel
.406
[10.31]
8-32 UNC-2A (Modified)
.312
[7.92]
Bulkhead Jack, Rear Mount
Part Number 145-0001-0001
.219
[5.56]
.625
[15.88]
Body and Body Components —
Brass per QQ-B-626 Comp 360.
Contact Material — Copper Alloy.
Crimp Sleeves — Leaded Copper.
Insulators — TEFLON per
ASTM-D-1710.
Lockwashers — #425 Bronze Alloy.
Plating — Gold per MIL-G-45204, Type
II, Grade C, Class 1.
Cable Acceptance Dimensions —
Center conductor: .012 [0.31] nom.
Dielectric: .040 [1.02] max. Shield: .080
[2.03] max. Jacket: .090 [2.29] max..
.750
[19.05]
Straight Plug
Part Number 144-0001-0001
Materials
Mechanical
.250
[6.35]
.719
[18.26]
All-Crimp Assembly —
Center contacts and shield are crimped
individually.
Durability — 500 mating cycles.
.312
[7.92]
Receptacle, Rear Mount
Part Number 145-0003-0001
.219
[5.56]
.312
[7.92]
.165–.168
[4.19–4.27]
“D” Hole Dimensions
For Panel Mounting
.625
[15.88]
.093 Max.
[2.36] Panel
.146–.149
[3.71–3.78]
Connector/Cable Assembly
Crimp Tools — Center Contact
and Shield
.285
[7.24]
8-32 UNC-2A (Modified)
Tool
SKT &
Pin Crimp
Housing
Crimp
Part No.
010-1004-0000
010-0081-0000
Receptacle, Front Mount
Part Number 145-0002-0001
126
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Cable Assemblies
no tooling charges, precision construction, thorough
inspection and prompt
delivery. The capability also
makes it possible for the
designer to specify a complete assembly or harness
with the understanding that
Tyco Electronics will deliver
a custom fabrication equal
in quality to the MICRODOT
Capability
The experience
Tyco Electronics has gained
through years of pioneering
efforts in the development
of MICRODOT miniaturized
cable and connectors is
available to customers in
the assembly of complex
cable/connector combinations. This experience offers
the customer low cost and
How To Order
1. Specify MICRODOT part numbers
A. Connector, one end
components it contains.
These assemblies are
made to the customer’s
specifications or are
designed by the Company’s
experienced engineers to fit
particular requirements.
Special features are light
weight, reduced size, high
operating temperatures and
comprehensive layouts.
3. Specify length tolerance
A. Standard tolerance
B. Connector, other end
C. Cable
Assembly Length
0 thru 12-1/2"
Tolerance
±1/8"
±1% rounded to
nearest 1/4"
±1% rounded to
nearest 1"
Over 12-1/2" thru 1000"
2. Specify normal length
A. Overall length
Over 1000"
Jacks
Plugs
O. A. L.
Right Angles
Jacks
B. Special tolerance
Tolerances as close as ±.5% are
available for most cable assemblies
at a premium rate. Consult
Tyco Electronics for details.
4. Specify cable strip (Applies to cable
assemblies with only one connector)
O. A. L.
Right Angles
A. Not stripped
Right Angles
B. Standard strip
1⁄2"
O. A. L.
B. Or length between connectors
Jacks
Plugs
Right Angles
Jacks
Coaxial
Connectors
1⁄2"
Cable Length
Between
Connectors
1⁄2"
Standard Strip
C. Special strip - specify style
Example:
Cable Length
Between
Connectors
Right Angles
Right Angles
Connector:
142-1000-0001 one end
142-1002-0001 other end
Length:
36" overall, standard tolerance
4
Cable Length
Between
Connectors
127
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Cable Assemblies (Continued)
Mating Interface Chart
Series
S50
50 Ohm
50 Ohm
S70
70 Ohm
70 Ohm
S93
93 Ohm
93 Ohm
SOS 50
SOS 70
SOS 93
QC 50
QC 70
QC 93
Screw-On
Slide-On
Screw-On
Screw-On
Screw-On
Slide-On
Plugs
Description
Standard
Gold Plated Crimp Style
Cap
Standard
Gold Plated Crimp Style
Cap
Standard
Gold Plated Crimp Style
Cap
Standard
Standard
Standard
Standard
Standard
Standard
Twinax
Twinax
Triax
LEPRA/CON Connector
LEPRA/CON Connector
Interlocking Interface
LEPRA/CON Connector
Page
94, 95
113, 114
109
94, 95
113, 114
109
94, 95
114
109
99, 100
100, 101
100, 101
103, 104
104
104
106
106
107
118
Series
S50
50 Ohm
50 Ohm
S70
70 Ohm
70 Ohm
S93
93 Ohm
93 Ohm
SOS 50
SOS 70
SOS 93
QC 50
QC 70
QC 93
Screw-On
Slide-On
Screw-On
Screw-On
120
Screw-On
122
Slide-On
Jacks and Receptacles
Description
Standard
Gold Plated Crimp Style
Feed Thru Adapter
Standard
Gold Plated Crimp Style
Feed Thru Adapter
Standard
Gold Plated Crimp Style
Feed Thru Adapter
Standard
Standard
Standard
Standard
Standard
Standard
Twinax
Twinax
Triax
LEPRA/CON Connector
LEPRA/CON Connector
Interlocking Interface
LEPRA/CON Connector
Page
96, 97
115, 116
110, 111
96, 97
115, 116
110, 111
96, 98
115, 116
110, 111
99, 102
101, 102
101, 102
103
103
103
106
106
107
118, 119
121
122, 123
128
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Cable Acceptance Dimensions
Standard Connectors
Screw-On Series
Connector
Part No.
Straight Plugs — Page 94
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
.087
2.21
.087
2.21
.093
2.36
.093
2.36
.087
2.21
.087
2.21
.088
2.24
.088
2.24
.087
2.21
.087
2.21
.087
2.21
.093
2.36
.087
2.21
.061
1.55
.061
1.55
.068
1.73
.077
1.96
.061
1.55
.061
1.55
.061
1.55
.061
1.55
.061
1.55
.061
1.55
.061
1.55
.068
1.73
.061
1.55
.050
1.27
.041
1.04
.050
1.27
.047
1.00
.050
1.27
.041
1.04
.041
1.04
.041
1.04
.050
1.27
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.013
.330
.015
.381
.013
.330
.015
.381
.015
.381
.015
.381
.015
.381
.015
.381
.013
.330
.015
.381
.015
.381
.015
.381
.015
.381
.093
2.36
.093
2.36
.108
2.74
.108
2.74
.093
2.36
.093
2.36
.075
1.91
.075
1.91
.079
2.01
.079
2.01
.075
1.91
.075
1.91
.061
1.55
.059
1.50
.059
1.50
.061
1.55
.059
1.50
.059
1.50
.013
.330
.015
.381
.015
.381
.013
.330
.015
.381
.015
.381
.134
3.40
.134
3.40
.154
3.91
.134
3.40
.155
3.94
.134
3.40
.134
3.40
.118
2.99
.118
2.99
.118
2.99
.118
2.99
.125
3.18
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.67
.097
2.446
.107
2.72
.100
2.54
.100
2.54
.013
.330
.015
.381
.015
.381
.031
.787
.015
.381
.015
.381
.015
.381
S-50
032-0021-0001
032-0023-0001
032-0025-0001
032-0033-0001
032-0097-0001
032-0098-0001
032-0155-0001
032-0156-0001
052-0213-0001
052-0235-0001
052-0235-0003
052-0370-0001
052-0542-0001
S-70
032-0010-0001
032-0022-0001
032-0067-0001
032-0078-0001
032-0222-0001
052-0092-0001
S-93
032-0011-0001
032-0017-0001
032-0071-0001
032-0092-0001
032-0099-0001
052-0200-0001
Coaxial
Connectors
032-0066-0001
4
129
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Cable Acceptance Dimensions (Continued)
Screw-On Series (Continued)
Max.
Shield
.092
2.34
.092
2.34
.092
2.34
.111
2.81
.060
1.52
.060
1.52
.060
1.52
.074
1.88
.111
2.81
.111
2.81
.111
2.81
.074
1.88
.074
1.88
.074
1.88
.123
3.12
.118
2.99
.118
2.99
.123
3.12
.123
3.12
.118
2.99
Any
052-0304-0022
.134
3.40
.155
3.94
.155
3.94
.134
3.40
.134
3.40
.155
3.94
Any
.012
.305
.012
.305
.012
.305
.012
.305
.012
.305
.012
.305
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
031-0033-0001
.088
2.24
.087
2.21
.079
2.01
.061
1.55
.061
1.55
.061
1.55
.041
1.04
.041
1.04
.041
1.04
.021
.533
.021
.533
.021
.533
.093
2.36
.093
2.36
.109
2.77
.075
1.91
.075
1.91
.079
2.01
.059
1.50
.059
1.50
.059
1.50
.021
.533
.021
.533
.021
.533
.134
3.40
.134
3.40
.154
3.91
.154
3.91
.118
2.99
.118
2.99
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.57
.101
2.57
.021
.533
.021
.533
.021
.533
.021
.533
Right-Angle Plugs — Page 95
Max.
Dielectric
Nom.
Inner
Conductor
Max.
Jacket
Connector
Part No.
S-50
032-0015-0001
052-0204-0001
052-0215-0001
052-0337-0001
Any
Any
Any
Any
.012
.305
.012
.305
.012
.305
.012
.305
S-70
032-0013-0001
052-0299-0001
052-0379-0001
Any
Any
Any
.012
.305
.012
.305
.012
.305
S-93
032-0014-0001
032-0068-0001
032-0153-0001
052-0207-0001
052-0298-0001
Jacks — Page 96
Any
Any
Any
Any
S-50
031-0034-0001
051-0467-0001
S-70
031-0036-0001
031-0048-0001
031-0090-0001
S-93
031-0032-0001
031-0037-0001
031-0088-0001
031-0089-0001
130
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Cable Acceptance Dimensions (Continued)
Slide-On Series
Straight Plugs — Page 100
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
.088
2.24
.088
2.24
.058
1.47
.058
1.47
.041
1.04
.041
1.04
.015
.381
.015
.381
.093
2.36
.093
2.36
.108
2.74
.075
1.71
.075
1.71
.079
2.01
.059
1.50
.059
1.50
.059
1.50
.015
.381
.015
.381
.015
.381
.134
3.40
.134
3.40
.154
3.91
.118
2.99
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.57
.015
.381
.015
.381
.015
.381
Max.
Jacket
Max.
Shield
Max.
Dielectric
Nom.
Inner
Conductor
.092
2.34
.060
1.52
Any
.012
.305
.111
2.82
.074
1.88
Any
.012
.305
.123
3.12
.118
2.99
Any
032-0083-0001
.134
3.40
.155
3.94
Any
.012
.305
.012
.305
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
.088
2.24
.088
2.24
.061
1.55
.061
1.55
.041
1.04
.041
1.04
.021
.533
.021
.533
.108
2.74
.079
2.01
.059
1.50
.021
.533
.134
3.40
.134
3.40
.154
3.91
.154
3.91
.118
2.99
.118
2.99
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.57
.101
2.57
.021
.533
.021
.533
.021
.533
.021
.533
Connector
Part No.
SOS-50
032-0055-0001
032-0056-0001
SOS-70
032-0060-0001
032-0061-0001
032-0087-0001
SOS-93
032-0058-0001
032-0077-0001
032-0084-0001
Right-Angle Plugs — Page 101
Connector
Part No.
SOS-50
032-0063-0001
SOS-70
032-0062-0001
SOS-93
032-0059-0001
Jacks — Page 101
Coaxial
Connectors
SOS-50
031-0053-0001
031-0054-0001
SOS-70
031-0095-0001
SOS-93
031-0063-0001
031-0064-0001
031-0093-0001
031-0094-0001
4
131
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Cable Acceptance Dimensions (Continued)
Quick-Connect Series
Max.
Shield
.093
2.36
.093
2.36
.058
1.47
.058
1.47
.041
1.04
.013
.330
.015
.381
.093
2.36
.093
2.36
.108
2.74
.075
1.91
.075
1.71
.079
2.01
.061
1.55
.059
1.50
.059
1.50
.013
.330
.015
.381
.015
.381
.134
3.40
.134
3.40
.154
3.91
.118
2.99
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.57
.013
.330
.015
.381
.015
.381
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Nom.
Inner
Conductor
032-0026-0001
.092
2.34
.060
1.52
Any
.012
.305
.111
2.82
.074
1.88
Any
.012
.305
.123
3.12
.118
2.99
Any
052-0228-0001
.134
5.40
.155
3.94
Any
.012
.305
.012
.305
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
031-0038-0001
.093
2.36
.061
1.55
.041
1.04
.021
.533
031-0040-0001
.134
3.40
.118
2.99
.100
2.54
.021
.533
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
032-0088-0001
.167
4.24
.123
3.12
.123
3.12
.167
4.24
.142
3.60
.092
2.34
.092
2.34
.142
3.61
.061
1.55
.042
1.07
.042
1.07
.061
1.55
Max.
Inner
Conductor
.014
.356
.014
.356
.014
.356
.014
.356
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
051-0358-0001
.167
4.24
.167
4.24
.142
3.60
.142
3.61
.061
1.55
.061
1.55
Straight Plugs — Page 104
Max.
Dielectric
Max.
Inner
Conductor
Max.
Jacket
Connector
Part No.
QC-50
032-0002-0001
032-0030-0001
Any
QC-70
032-0016-0001
032-0031-0001
032-0079-0001
QC-93
032-0012-0001
032-0032-0001
032-0072-0001
Right-Angle Plugs — Page 104
QC-50
QC-70
032-0027-0001
QC-93
032-0020-0001
Jacks — Page 105
QC-50
QC-93
Twinax
Plugs — Page 106
032-0093-0001
052-0229-0001
052-0324-0001
Jacks — Page 106
051-0389-0001
Max.
Inner
Conductor
.020
.508
.020
.508
132
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Cable Acceptance Dimensions (Continued)
Triax
Plugs — Page 107
Connector
Part No.
Max.
Jacket
052-0130-0001
.124
3.15
.183
4.65
.214
5.44
052-0138-0001
052-0593-0001
Gold Plated Crimp Style
Coaxial Connectors
Straight Plugs — Pages 113, 114
Connector
Part No.
50 Ohm Series
132-0112-000*
132-0113-000*
132-0114-000*
132-0115-000*
132-0509-0002
Max.
Outer
Dielectric
.085
2.26
.146
3.71
.166
4.22
Max.
Outer
Shield
Single
Shield
Single
Shield
Single
Shield
Max.
Jacket
Max.
Dielectric
Nom.
Inner Conductor
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.116
2.95
.039
.991
.039
.991
.070
1.78
.070
1.78
.070
1.78
.012
.305
.012
.305
.012
.305
.012
.305
.012
.305
.110
2.79
.110
2.79
.070
1.78
.070
1.78
.012
.305
.012
.305
.155
3.94
.155
3.94
.107
2.72
.107
2.72
.012
.305
.012
.305
Max.
Jacket
Max.
Dielectric
Nom.
Inner Conductor
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.039
.991
.039
.991
.074
1.88
.074
1.88
.012
.305
.012
.305
.012
.305
.012
.305
.110
2.79
.110
2.79
.074
1.88
.074
1.88
.012
.305
.012
.305
.155
3.94
.155
3.94
.107
2.72
.107
2.72
.012
.305
.012
.305
Max.
Inner
Shield
Single
Shield
.118
2.99
.161
4.09
Max.
Inner
Dielectric
.041
1.04
.107
2.72
.131
3.33
Max.
Inner
Conductor
.014
.356
.014
.356
.020
.508
70 Ohm Series
132-0200-000*
132-0201-000*
93 Ohm Series
132-0300-000*
132-0301-000*
Right-Angle Plugs — Page 114
Connector
Part No.
50 Ohm Series
132-0116-0002
132-0118-0002
132-0119-0002
Coaxial
Connectors
132-0117-0002
70 Ohm Series
132-0202-0002
132-0203-0002
93 Ohm Series
132-0302-0002
132-0303-0002
4
133
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Cable Acceptance Dimensions (Continued)
Gold Plated Crimp Style
Coaxial Connectors (Continued)
Jacks — Page 115
Connector
Part No.
50 Ohm Series
131-0134-0001
131-0135-0001
131-0136-0001
131-0137-0001
Max.
Jacket
Max.
Dielectric
Nom.
Inner Conductor
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.039
.991
.039
.991
.070
1.78
.070
1.78
.012
.305
.012
.305
.012
.305
.012
.305
.110
2.79
.110
2.79
.070
1.78
.070
1.78
.012
.305
.012
.305
.155
3.94
.155
3.94
.107
2.72
.107
2.72
.012
.305
.012
.305
Max.
Jacket
.081
2.06
Max.
Dielectric
.040
1.02
Nom.
Inner Conductor
.012
.305
70 Ohm Series
131-0200-0001
131-0201-0001
93 Ohm Series
131-0300-0001
131-0301-0001
LEPRA/CON Connectors
All — Pages 118-126
Connector
Part No.
All
134
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Hermetic Connectors
Coaxial Screw-On,
Slide-On Series
Material and Finish
Service and Performance Data
50 Connector uses 10-32 thread.
70 Connector uses 12-32 thread.
93 Connector uses 1/4-32 thread.
Housing (1) — Cold rolled steel silver
plate.
Gasket (2) — Neoprene or silicone
rubber.
Insulator (3) — TEFLON.
Glass Seal (4)
Center Contact (5) — Nickel Iron
alloy contact with slotted turret type
solder pot (other terminations available).
Temperature Range —
-65°F to 450°F [–54°C to 232°C] .
Electrical — 750 VAC working voltage.
Performance — 1200 VAC test at
sea level.
Insulation Resistance — 5000
megohms at 500 VDC (room temperature).
Shock — 100 G’s minimum.
Pressure — 100 PSI minimum.
Leak Rate Per Seal — Less than
1.04 x 10-8 cc/sec. (.001 Micron cubic
ft/hr) of 100% helium tested at one
atmosphere pressure differential far
exceeding requirements of MIL-C-26500
and MIL-C-26482.
Plating — Silver unless otherwise
specified.
X
Bulkhead Solder Mount
A
.25
[6.35]
.125
[3.18]
.281
[7.14]
.125
[3.18]
D
ØC ØB
X
D
A
.438
[11.13]
X
Y
ØC
.438
[11.13]
A
.125 Typ.
[3.18]
D
Fig. 1
ØC ØB
ØB
Fig. 2
Part No.
Fig.
051-0049-0001
1
051-0056-0001
1
053-0228-0001
2
051-0315-0001
3
A
.563
14.30
.563
14.30
.594
15.09
.656
16.66
Fig. 3
B Dia.
.25
6.35
.313
7.95
.25
6.35
.25
6.35
C Dia. ±.015
.200
5.08
.251
6.38
.227
5.77
.195
4.95
D
.125
3.18
.125
3.18
.234
5.94
.063
1.60
X*
Y*
S-50
—
S-93
—
S-50
S-50
S-50
—
* “S” indicates Screw-On Series
Dimensions are subject to change without notice.
.328
[8.33]
ØB
A
Glass Seal
A
Ø .203
[5.16]
Y
X
D
.063
[1.60]
Coaxial
Connectors
A
Bulkhead Solder Mount,
Panel Insulated
Y
X
ØC
ØC
ØB
.047
[1.19]
.125
[3.18]
.063
[1.60]
D
Fig. 1
C
.047
[1.19]
Glass Seal
Fig. 2
Part No.
Fig.
051-0232-0001
1
053-0227-0001
2
053-0412-0001
2
053-0028-0001
3
A
.563
14.30
.609
15.47
.609
15.47
.609
15.47
B Dia.
.406
10.31
.625
15.88
.625
15.88
.625
15.88
Y
X
B
.063
[1.60]
Fig. 3
C Dia.
.370
9.40
.540
13.72
.540
13.72
.540
13.72
D
.172
4.37
.297
7.54
.297
7.54
.297
7.54
X*
4
Y*
S-50
S-50
S-50
S-93
S-93
SOS-50
S-50
* “S” indicates Screw-On Series; “SOS” indicates Slide-On Series
Dimensions are subject to change without notice.
135
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Hermetic Connectors (Continued)
Coaxial Screw-On, Slide-On Series
A
(Continued)
G
.094
[2.38]
Microminiature Coaxial
Receptacles
Y
B X
Hex.
M
D
H
C Thd.
E
Mounting Hole
F
Part No.
053-0455-0001
053-0636-0001
A
.688
17.46
.922
23.42
B Hex.
.563
14.29
.625
15.88
C Thd.
5/16-32
UNEF-2A
3/8-32
UNEF-2A
D
.297
7.54
.344
8.73
E
.094
2.38
.078
1.98
F
.203
5.16
.203
5.16
G
.25
6.35
.438
11.11
H
.312
7.92
.375
9.53
M
.291
7.39
.347
8.81
X*
Y*
S-50
S-50
S-93
S-93
* “S” indicates Screw-On Series
Dimensions are subject to change without notice.
Solder Mount Slide-On Series
Receptacles
A
ØC
X
ØB
E
D
Part No.
A
.563
14.29
.563
14.29
051-0134-0001
051-0158-0001
B Dia.
.375
9.53
.25
6.35
C Dia. ±.015
.309
7.85
.200
5.08
D
.172
4.37
.125
3.18
E
.031
.794
.047
1.19
X*
SOS-50, 70, 93
SOS-50, 70, 93
* “SOS” indicates Slide-On Series
Dimensions are subject to change without notice.
Single Hole Mount
Receptacles
A
D
.094
[2.38]
X
H
B
Hex.
C Thd.
Mounting Hole
E
F
Part No.
051-0249-0001
051-0154-0001
A
.563
14.29
.656
16.67
B Hex.
.375
9.53
.625
15.88
C Thd.
12-32
UNEF-2A
3/8-32
UNEF-2A
D
.078
1.98
.156
3.97
E
.109
2.78
.078
1.98
F
.234
5.95
.203
5.16
H
.218
5.54
.375
9.53
X*
S-50
S-93
* “S” indicates Screw-On Series
Dimensions are subject to change without notice.
136
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
NANONICS Connectors
Table of Contents
Nano-Miniature Connectors Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Nano-Miniature Connectors Technical and Performance Data . . . . . . . . . . . . . . . . . 140
DUALOBE Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141-178
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Wired Connectors
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Part Numbering Guideline for Wired Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Jumper Assemblies
Single Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145, 146
Two Row Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147, 148
Part Numbering Guideline for Jumper Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Surface Mount Connectors
Horizontal
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Vertical
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152-154
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155, 156
Thru-Hole Connectors
Horizontal
1 Row to 2 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
2 Row to 4 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Vertical
1 Row to 2 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
2 Row to 4 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Part Numbering Guideline for SMT and Through-Hole Connectors . . . . . . . . . . . . . . 161
Flex Termination "Duckbill" Connectors
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162, 163
Part Numbering Guideline for Flex Termination "Duckbill" Connectors . . . . . . . . . . . . 163
Solder Cup Connectors
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Part Numbering Guideline for Solder Cup Termination . . . . . . . . . . . . . . . . . . . . . . . . 166
Panel Mount Connectors
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Part Numbering Guideline for Panel Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . 169
Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170-178
137
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
NANONICS Connectors
Table of Contents (Continued)
Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179-196
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Quick Disconnect
Plug Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180, 181
Plug Assemblies with Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182, 183
Receptacle Assemblies, Flush Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184, 185
Threaded Coupling
Plug Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186, 187
Plug Assemblies with Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188, 189
Receptacle Assemblies, Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190, 191
Panel Mount Receptacle Assemblies w/Backshells. . . . . . . . . . . . . . . . . . . . . . . 192, 193
Part Numbering Guideline for Environmentally Sealed Circular Connectors. . . . . . . . 194
Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197-206
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Typical VSWR and Insertion Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Part Numbering Guideline for 50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . 200
Horizontal SMT 50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Part Numbering Guideline for Horizontal SMT 50 Ohm Coax Connectors . . . . . . . . . . 202
50 Ohm Coax with Mixed Signal Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Part Numbering Guideline for 50 Ohm Coax w/Mixed Signal Connectors . . . . . . . . . . 204
Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207-214
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Wired Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Part Numbering Guideline for Strip Wired Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 209
Surface Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Thru-Hole Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Part Numbering Guideline for SMT and Thru-Hole Connectors . . . . . . . . . . . . . . . . . . . 212
Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
138
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
NANONICS Connectors
Nano-Miniature Connectors - Introduction
Nanonics Connectors
5
Nano-miniature connectors
constitute a family of interconnect devices with center
to center contact spacing of
.025”. In comparison to
other connector families,
they are often thought of as
the smallest practical connector system for separable
interfaces. Despite being
smaller, these nano-miniature connectors are tested
with a few size-related modifications per the guidelines
of MIL-DTL-83513 (written
for .050” micro-miniature
connectors). Nano-miniature connectors combine
their appealing size and
weight with desired performance attributes such as
high reliability, low contact
resistance and wide operating temperature range,
making them among the
smallest and toughest
connectors available to
designers.
The Contact System
Nanonics connectors utilize
the same contact system
throughout the entire product family. This contact
system uses a “spring
socket” as opposed to
most connector designs,
which use a “spring pin”.
In this design, the socket
member of the contact pair
employs a dimple located
inside the contact tube.
When the pin is engaged
with this socket, the dimple
creates the desired spring
action by forcing the pin to
offset to the opposite side
of the socket tube. The
result is a gold-on-gold
mating area covering a
minimum of 180° of the
contact surface. This also
creates a desirable mating
force of no greater than 6
ounces per contact and a
resistance of .003 ~ .008
ohms. This type of contact
system begins with a preplated BeCu alloy material
that is then formed to yield
a rugged, seamless contact. Both the blind-bore
seamless pin and the
seamless one piece socket
have a burnished gold
finish on both the inside
and outside surfaces. This
gold finish provides contact
integrity for superior
reliability and environmental
performance.
Contact Configuration
Crimp
Area
Seamless
Blind-Bore Pin
Wire
Stop
Dimple for
Engaging Force
139
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
NANONICS Connectors
Nano-Miniature Connectors
Technical and Performance
Data
Electrical
Environmental
Contact Resistance – .003 - .008
ohms
Current Rating – 1 amp max. per
contact
Dielectric Withstanding Voltage –
Volts RMS 60 Hz at room ambient conditions. At sea level 500V. At 70,000 ft.
150V.
Insulation Resistance – 5000
megohms min. (@ 500 VDC) at room
ambient conditions.
Magnetic Permeability – 2 mu max.
Temperature Range – -200° C to
+200° C
Shock – No discontinuity in excess of 1
µ sec. when tested in accordance with
MIL-STD-1344, Method 2004.1, Test
Condition E.
Vibration – No discontinuity in excess
of 1 µ sec. when tested in accordance
with MIL-STD-1344, Method 2005.1,
Test Condition IV.
Solderability – Connectors shall meet
the test requirements of MIL-STD-202,
Method 208.
Durablity – No mechanical or electrical
defects detrimental to the function of the
connectors after 500 cycles of mating
and unmating, without the use of
hardware.
Humidity – After exposure to humidity
as specified by MIL-STD-1344, Method
1002.2, Type II, IR shall be 1 megohm
min. (@ 100 VDC) within 2 hours of
conditioning and 1000 megohms min.
(@ 100 VDC) after 24 hours of conditioning.
Mechanical
Contact Engagement & Separation
– Engaging force is 6.0 oz. max.
Separation force is 0.5 oz. min.
Mating Force Maximum –
Calculated as 10 oz. multiplied by the
number of contacts.
Material and Finish
Salt Spray – Connectors shall meet the
performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subjected to the 48 hour 5 % solution salt
spray test per MIL-STD-1344, Method
1001, Condition B.
Fluid Immersion – Unmated connectors after being fully immersed in one of
the following fluids, for the prescribed
time, will mate at a force of 10 oz. multiplied by the number of contacts or less:
Perchloroethylene, 2 hours; Lubricating
oil per MIL-L-23699, 20 hours.
Crimp Tensile Strength –
(Unassembled contacts with crimped
stranded wire terminations) Wires will
not pull out of the contacts when the following axial load is applied: #30 AWG,
2 lbs.
Thermal Vacuum Outgassing –
Connectors shall have a maximum total
mass loss (TML) of 1.0 % of the original
specimen mass and a maximum collected volatile condensable materials
(CVCM) content of 0.1 % of the original
specimen mass when tested in accordance with SP-R-0022A.
Contacts – BeCu alloy plated with gold
per MIL-G-45204 Type II over nickel per
QQ-N-290.
Plastic Insulators and Shells –
30% glassed filled Liquid Crystal
Polymer (LCP).
Metal Shells – 6061-T6 Aluminum
with electroless nickel plating per MILC-26074. Stainless steel and gold plated shells are also available.
140
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
DUALOBE Rectangular Connectors
DUALOBE Rectangular
Connectors
5
Nanonics D-style rectangular connectors have earned
the distinction of being the
most popular and widely
utilized style of Nano connectors. These connectors
incorporate the DUALOBE
polarization scheme. This
polarization scheme
negates the need for
mating guide pins and
does not increase the
package size. The
DUALOBE series of
connectors are available in
both machined aluminum
and molded plastic shells,
both in one and two row
connector housings. Single
row configurations commonly have standard pin
counts from 5 to 51, while
the higher density two row
configurations have pin
counts from 9 to 65. These
connectors can be terminated in many different
ways. Standard configurations include wires, surface
mount, thru-hole, solder
cup, “duckbill”, and panel
mount. Wired harness
assemblies and custom
configurations can also be
accommodated. Such
custom configurations
include filtered, hermetic,
environmentally sealed,
and blind mate connectors.
This family of connectors is
designed to meet the
requirements of MIL-DTL83513, with a few size related modifications.
Designed primarily for the
military and aerospace
industry, the DUALOBE
series is especially well
suited when high reliability,
coupled with reduced size
and weight, are serious
design parameters. A clear
example of this is the use
of Nanonics connectors in
such applications as smart
munitions, missile defense,
aircraft communications,
and UAV’s. In addition to
the above applications, with
the wide temperature range
of the DUALOBE connector
(-200°C to +200°C), the
space and petroleum
industries have also found
many uses for this connector. The performance and
reliability at cryogenic temperatures, along with the
low outgassing material
properties, has led to an
increased usage in space
applications. Such applications include nitrogencooled optics, low and high
earth orbiting satellites,
telescopes, deep space
probes, orbiters, and
rovers. On the opposite
end of the spectrum, the
petroleum exploration
industry utilizes these
connectors for their performance and reliability in
downhole environments at
temperatures exceeding
150°C.
141
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Wired Connectors — Single Row, Flying Leads
.075
[1.91] 2 Plcs.
.117
[2.97]
.205
[5.21]
.112
[2.84] 2 Plcs.
.223
[5.66]
Plug
B
B
Position 1
.038
[0.97] Typ.
.038
[0.97] Typ.
C
Position 1
.086
[2.18]
.043
[1.09] 2 Plcs.
.043
[1.09] 2 Plcs.
.086
[2.18]
L
L
C
Receptacle
Plug with Flying Leads
Drawing Number 1589455
Receptacle with Flying Leads
Drawing Number 1589457
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 5, 9, 15,
25, 37, and 51
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
Size
5
9
15
25
37
51
0.233
0.333
0.483
0.733
1.033
1.383
B
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
Dimensions
C
0.3085 [7.84]
0.4085 [10.38]
0.5585 [14.19]
0.8085 [20.54]
1.1085 [28.16]
1.4585 [37.05]
L
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
142
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Wired Connectors — Two Row, Flying Leads
DUALOBE Rectangular
Connectors
.075
[1.91] 2 Plcs.
.205
[5.21]
Plug
.117
[2.97]
B
Position 1
.126
[3.20]
B
C
.058
[1.47] 2 Plcs.
Receptacle
.112
[2.84] 2 Plcs.
.223
[5.66]
.038
[0.97] Typ.
.040
[1.02] Typ.
L
.058
2 Plcs.
[1.47]
Position 1
.126
[3.20]
.040
[1.02] Typ.
L
Position
“Size”
.038
[0.97] Typ.
C
Position “Size”
Plug with Flying Leads
Drawing Number 1589472
Receptacle with Flying Leads
Drawing Number 1589476
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
Size
9
15
25
37
51
65
0.229
0.304
0.429
0.579
0.754
0.929
B
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
Dimensions
C
0.3085 [7.84]
0.3835 [9.74]
0.5085 [12.92]
0.6585 [16.73]
0.8335 [21.17]
1.0085 [25.62]
L
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
0.800 [20.32]
143
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
5
DUALOBE Rectangular Connectors
Part Numbering Guideline for Wired Connectors
DUALOBE Connectors - Wire Terminations
S
X
X
XXX
XX
X
XX
XXX
Class
X
Threads/Jackscrew
S Dualobe
Threads (Receptacles Only)
Jackscrews (Plugs Only)
Rows
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrew
S 1 Row
Q Thread for 1.2 mm Jackscrews
Conductor Length
Type
L
N 1.0 mm Captive Jackscrew
Q 1.2 mm Captive Jackscrew
T 2 Row
LCP (Plastic)
M Metal (Al, Ni Plate)
XXX
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX
A "C" followed by two numbers, length is in centimeters ( i.e. C06 = six centimeters)
MXX
An "M" followed by two numbers, length is in meters ( i.e. M02 = two meters)
Positions
005
5 Position (single row only)
Conductor Type
009
9 Position
DX
White TEFLON
DM
Color Coded TEFLON per MIL-STD-681
015 15 Position
DY
White PTFE M16878/6
DT
White TEFZEL M22759/33
025 25 Position
DC Color Coded TEFLON
GX
TEFLON Ribbon Cable FEP
037 37 Position
051 51 Position
Conductor Size/Strands
065 65 Position (two row only)
0
28 AWG Solid
1
30 AWG Solid
2
30 AWG 7 Strand
3
32 AWG 7 Strand
4
34 AWG 7 Strand
Configurations
PC
Plug
SC
Receptacle
144
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Jumper Assembly Connectors — Single Row
DUALOBE Rectangular
Connectors
.043
2 Plcs.
[1.09]
.086
[2.18]
Length as Specified
in Part Number
Position 1
.205
[5.21]
C
B
L
5
Plug to Receptacle
.075
[1.91] 2 Plcs.
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 5, 9, 15,
25, 37, and 51
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
.086
[2.18]
B
L
.038
[.97] Typ.
Plug to Plug
Drawing Number 1589735
Jumper Assembly, Plug To Plug,
Single Row Dualobe,
Plastic or Metal
1589735
.043
2
[1.09] Plcs.
.112
[2.85]
2 Plcs.
C
Position 1
.117
[2.97]
.223
[5.66]
Length as Specified
in Part Number
.043
[1.09] 2 Plcs.
.086
[2.18]
.205
[5.21]
B
B
Position 1
L
C
.075
[1.91] 2 Plcs.
.038
[.97] Typ.
.038
[.97] Typ.
.117 Position 1
[2.97]
Plug to Receptacle
Drawing Number 1589736
Jumper Assembly, Plug
To Receptacle, Single Row
Size
5
9
15
25
37
51
0.233
0.333
0.483
0.733
1.033
1.383
B
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
Dimensions
Dualobe, Plastic or Metal
C
0.3085 [7.84] 1589736
0.4085 [10.38]
0.5585 [14.19]
0.8085 [20.54]
1.1085 [28.16]
1.4585 [37.05]
L
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
145
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Jumper Assembly Connectors — Single Row (Continued)
.043
[1.09] 2 Plcs.
.086
.112
[2.18]
[2.85] 2 Plcs.
L
B
C
.223
[5.66]
Length as Specified
in Part Number
Position 1
B
Position 1
.038
[0.97] Typ.
Receptacle to Receptacle
Drawing Number 1589803
Jumper Assembly, Receptacle
To Receptacle, Single Row
Dualobe, Plastic or Metal
1589803
Size
5
9
15
25
37
51
0.233
0.333
0.483
0.733
1.033
1.383
B
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
Dimensions
C
0.3085 [7.84]
0.4085 [10.38]
0.5585 [14.19]
0.8085 [20.54]
1.1085 [28.16]
1.4585 [37.05]
L
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
146
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Jumper Assembly Connectors — Two Row
DUALOBE Rectangular
Connectors
Position 1
.058
[1.47] 2 Plcs.
.126
[3.20]
.205
[5.21]
Length as Specified
in Part Number
B
L
C
5
Plug to Receptacle
.075
[1.91] 2 Plcs.
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
.040
[1.02] Typ.
.117
[2.97]
.038
[.97] Typ.
Jumper Assembly, Plug to Plug
Two Row Dualobe,
Plastic or Metal
1589737
Length as Specified
in Part Number
.058
[1.47]
2 Plcs.
L
.040
[1.02] Typ.
Plug to Plug
Drawing Number 1589737
.126
[3.20]
B
Position 1
C
.112
[2.85]
2 Plcs.
.223
[5.66]
.126
[3.20]
.205
[5.21]
.058
[1.47] 2 Plcs.
B
B
.075
[1.91] 2 Plcs.
Position 1
Position 1
.117
[2.97]
.038
[.97] Typ.
L
C
.040
[1.02] Typ.
.038
[.97] Typ.
Plug to Receptacle
Drawing Number 1589738
Jumper Assembly, Plug
To Receptacle, Two Row
Dualobe, Plastic or Metal
1589738
Size
9
15
25
37
51
65
0.229
0.304
0.429
0.579
0.754
0.929
B
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
Dimensions
C
0.3085 [7.84]
0.3835 [9.74]
0.5085 [12.92]
0.6585 [16.73]
0.8335 [21.17]
1.0085 [25.62]
L
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
0.800 [20.32]
147
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Jumper Assembly Connectors — Two Row (Continued)
.126
[3.20]
.223
[5.66]
.058
[1.47] 2 Plcs.
Length as Specified
in Part Number
.112
[2.85] 2 Plcs.
B
C
L
Position 1
B
Position 1
.040
[1.02] Typ.
.038
[.97] Typ.
Receptacle to Receptacle
Drawing Number 1589804
Jumper Assembly, Receptacle
To Receptacle, Two Row
Dualobe, Plastic or Metal
1589804
Size
9
15
25
37
51
65
0.229
0.304
0.429
0.579
0.754
0.929
B
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
Dimensions
C
0.3085 [7.84]
0.3835 [9.74]
0.5085 [12.92]
0.6585 [16.73]
0.8335 [21.17]
1.0085 [25.62]
L
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
0.800 [20.32]
148
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Numbering Guideline for Jumper Assemblies
DUALOBE Rectangular
Connectors
DUALOBE Connectors - Jumper Terminations
J
X
X
XXX
XX
X
XX
XXX
Class
X
Threads/Jackscrews
J Jumper
Threads (Receptacles Only)
Jackscrews (Plugs Only)
Rows
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrews
S 1 Row
Q Thread for 1.2 mm Jackscrews
N 1.0 mm Captive Jackscrews
Q 1.2 mm Captive Jackscrews
T 2 Row
Conductor Length
Type
L
LCP (Plastic)
M Metal (Al, Ni Plate)
XXX
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX
A "C" followed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX
An "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
5
Positions
005
5 Position (single row only)
Conductor Type
009
9 Position
DX
White Teflon
DM
Color Coded Teflon per MIL-STD-681
015 15 Position
DY
White PTFE M16878/6
DT
White Tefzel M22759/33
025 25 Position
DC Color Coded Teflon
GX
Telfon Ribbon Cable
037 37 Position
051 51 Position
Conductor Size/Strands
065 65 Position (two row only)
0
28 AWG Solid
1
30 AWG Solid
2
30 AWG 7 Strand
Configuration
PP
Plug to Plug, 1 to 1
PR
Plug to Receptacle, 1 to 1
PD
Plug to Plug, low to high in row
RR
Receptacle to Receptacle, 1 to 1
3
32 AWG 7 Strand
4
34 AWG 7 Strand
149
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Surface Mount Connectors — Horizontal, Single Row
A
.025
[.64] Pitch
.205
[5.21]
.075
[.69] 2 Plcs.
.020
[.51] Typ.
.255
[6.48] Typ.
.117
[2.97]
Jackscrews Omitted for Clarity
Receptacle
B
Position 1
.038
[.97] Typ.
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 5, 9, 15,
25, 37, and 51
Contact Tyco Electronics for
custom configurations
Suggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
.043
2 Plcs.
[1.09]
.086
[2.18]
L
C
Plug Assembly
Drawing Number 1589460
A
Plug Assembly,
.020
Horizontal Surface Typ.
Mount,
[.51]
Single Row Dualobe, Plastic or Metal
.025
[.64] Pitch
1589460
.273
[6.93] Typ.
.223
[5.66]
.112
[2.84] 2 Plcs.
B
B
Position 1
.038
[.97] Typ.
.043
2 Plcs.
[1.09]
.086
[2.18]
L
C
Receptacle Assembly
Drawing Number 1589462
Size
5
9
15
25
37
51
Dimensions
A
0.050 [1.27]
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
Receptacle Assembly,
Horizontal Surface Mount,
Single Row Dualobe, Plastic or Metal
B
0.233
0.333
0.483
0.733
1.085
1.383
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
C
0.3085
0.4085
0.5585
0.8085
1.1085
1.4585
L
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
1589462
[7.84]
[10.38]
[14.19]
[20.54]
[28.16]
[37.05]
150
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Surface Mount Connectors — Horizontal, Two Row
.020
[.51] Typ.
.112
2 Plcs.
[2.84]
.223
[5.66]
DUALOBE Rectangular
Connectors
A
.025
Pitch
[.64]
.0125
[.318] Offset
.273
[6.93] Typ.
.323
Typ.
[8.20]
5
Receptacle
B
Product Facts
n
n
n
n
Position 1
.038
[.97] Typ.
.040
[1.02] Typ.
B
Plastic or Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Contact Tyco Electronics for
custom configurations
Suggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
.058
[1.47] 2 Plcs.
.126
[3.20]
Position ‘Size’
L
C
Receptacle Assembly
Drawing Number 1589483
A
.025
[.64] Pitch
.0125
[.318] Offset
.020
Typ.
[.51]
.075
Receptacle Assembly,
[.69] 2 Plcs.
Horizontal Surface Mount,
Two Row Dualobe, Plastic or Metal
.305
.255
[7.75] Typ.
[6.48] Typ.
1589483
.117
[2.97]
.205
[5.21]
Jackscrews Omitted for Clarity
B
Position 1
.038
Typ.
[.97]
.040
[1.02] Typ.
.058
2 Plcs.
[1.47]
.126
[3.20]
L
C
Position ‘Size’
Plug Assembly
Drawing Number 1589490
Size
9
15
25
37
51
65
Dimensions
A
0.050 [1.27]
0.875 [2.23]
0.150 [3.81]
0.225 [5.72]
0.313 [7.95]
0.400 [10.16]
B
0.229
0.304
0.429
0.579
0.754
0.929
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
C
0.3085
0.3835
0.5085
0.6585
0.8335
1.0085
Plug Assembly,
Horizontal SurfaceLMount,
Two Row Dualobe,
Plastic
or Metal
[7.84]
0.100
[2.54]
[9.74]
[12.92]
[16.73]
[21.17]
[25.62]
0.175 [4.45]
0.300 [8.89]
0.450 [11.43]
0.625 [15.88]
0.800 [20.32]
1589490
151
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Surface Mount Connectors — Vertical, Single Row
C
Position 1
L
.038
[.97] Typ.
.086
[2.18]
.043
[1.09] 2 Plcs.
.025
[.64] Pitch
A
Receptacle
B
B
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 5, 9, 15,
25, 37, and 51
Contact Tyco Electronics for
custom configurations
Suggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
.112
[2.84] 2 Plcs.
.223
[5.66]
.030
[.76] Typ.
Receptacle Assembly
Drawing Number 1589463
Receptacle Assembly,
Vertical Surface Mount,
Single Row Dualobe, Plastic or Metal
C
1589463
L
Position 1
.038
[.97] Typ.
.086
[2.18]
.043
2 Plcs.
[1.09]
.025
Pitch
[.64]
A
B
.117
[2.97]
.205
[5.21]
.030
[.76] Typ.
.075
[1.91] 2 Plcs.
Plug Assembly
Drawing Number 1589465
Size
5
9
15
25
37
51
Plug Assembly,
Vertical Surface Mount,
Single Row Dualobe, Plastic or Metal
Dimensions
A
0.050 [1.27]
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
B
0.233
0.333
0.483
0.733
1.085
1.383
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
C
0.3085
0.4085
0.5585
0.8085
1.1085
1.4585
[7.84]
[10.38]
[14.19]
[20.54]
[28.16]
[37.05]
L
1589465
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
152
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Surface Mount Connectors — Vertical, Single Row with Alternating Leads
n
n
n
n
DUALOBE Rectangular
Connectors
Product Facts
C
Plastic or Metal Shell
Standard Sizes: 5, 9, 15,
25, 37, and 51
Contact Tyco Electronics for
custom configurations
Suggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
Position 1
L
.025
[.64]
.038
[.97] Typ.
.086
[2.18]
.043
2 Plcs.
[1.09]
.050
[1.27] Pitch
5
A
B
B
.112
[2.84] 2 Plcs.
.223
[5.66]
.030
[.76] Typ.
Receptacle Assembly
Drawing Number 1589464
C
Receptacle Assembly,
Vertical Surface Mount, Alternating Leads
Single Row Dualobe, Plastic or Metal
L
1589464
.025
[.64]
.038
Typ.
[.97]
.086
[2.18]
.043
2 Plcs.
[1.09]
.050
Pitch
[1.27]
Position 1
A
B
.117
[2.97]
.205
[5.21]
.075
[1.91] 2 Plcs.
.030
[.76] Typ.
Plug Assembly
Drawing Number 1589466
Size
5
9
15
25
37
51
Plug Assembly,
Vertical Surface Mount, Alternating Leads
Single Row Dualobe, Plastic or Metal
Dimensions
A
0.050 [1.27]
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
B
0.233
0.333
0.483
0.733
1.085
1.383
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
1589466
C
0.3085
0.4085
0.5585
0.8085
1.1085
1.4585
L
[7.84]
[10.38]
[14.19]
[20.54]
[28.16]
[37.05]
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
153
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Surface Mount Connectors — Vertical, Single Row with Integrated Standoffs
Product Facts
n
n
n
n
C
Position 1
Metal Shell
Standard Sizes: 5 , 9, 15,
25, 37, and 51
Contact Tyco Electronics for
custom configurations
Suggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
L
.038
[.97] Typ.
.086
[2.18]
.043
[1.09] 2 Plcs.
.025
[.64] Pitch
A
B
.223
[5.66]
.253
[6.43]
.072
[1.83] 2 Plcs.
Receptacle Assembly
Drawing Number 1589467
Receptacle Assembly,
Vertical Surface Mount, Single Row Dualobe,
Metal w/ Integrated Standoffs
1589467
Size
5
9
15
25
37
51
Dimensions
A
0.050 [1.27]
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
B
0.233
0.333
0.483
0.733
1.085
1.383
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
C
0.3085
0.4085
0.5585
0.8085
1.1085
1.4585
[7.84]
[10.38]
[14.19]
[20.54]
[28.16]
[37.05]
L
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
154
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Surface Mount Connectors — Vertical, Two Row
DUALOBE Rectangular
Connectors
C
Position 1
L
.0125
[.318]
Offset
.058
[1.47] 2 Plcs.
.038
[.97] Typ.
.040
[1.02] Typ.
.126
[3.20]
.025
[.64] Pitch
A
Receptacle
5
B
B
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Contact Tyco Electronics for
custom configurations
Suggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
.112
[2.84] 2 Plcs.
.223
[5.66]
.030
[.76] Typ.
Receptacle Assembly,
Vertical Surface Mount,
Two Row Dualobe, Plastic or Metal
Receptacle Assembly
Drawing Number 1589484
1589484
C
L
Position 1
.126
[3.20]
.0125
[.318] Offset
.038
[.97] Typ.
.040
[1.02] Typ.
.058
[1.47]
2 Plcs.
.025
[.64] Pitch
A
B
.117
[2.97]
.205
[5.21]
.075
[1.91] 2 Plcs.
.030
[.76] Typ.
Plug Assembly
Drawing Number 1589485
Plug Assembly,
Vertical Surface Mount,
Two Row Dualobe, Plastic or Metal
Size
9
15
25
37
51
65
Dimensions
A
0.050 [1.27]
0.875 [2.23]
0.150 [3.81]
0.225 [5.72]
0.313 [7.95]
0.400 [10.16]
B
0.229
0.304
0.429
0.579
0.754
0.929
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
C
0.3085
0.3835
0.5085
0.6585
0.8335
1.0085
L
[7.84]
[9.74]
[12.92]
[16.73]
[21.17]
[25.62]
1589485
0.100 [2.54]
0.175 [4.45]
0.300 [8.89]
0.450 [11.43]
0.625 [15.88]
0.800 [20.32]
155
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Surface Mount Connectors — Vertical, Two Row with Integrated Standoffs
Product Facts
n
n
n
n
C
Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Contact Tyco Electronics for
custom configurations
Suggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
Position 1
L
.0125
[.318]
Offset
.058
[1.47] 2 Plcs.
.038
[.97] Typ.
.040
[1.02] Typ.
.126
[3.20]
.025
[.64] Pitch
A
B
.223
[5.66]
.253
[6.43]
.072
[1.83] 2 Plcs.
Receptacle Assembly
Drawing Number 1589486
Receptacle Assembly,
Vertical Surface Mount, Two Row Dualobe,
Metal w/ Integrated Standoffs
1589486
Size
9
15
25
37
51
65
Dimensions
A
0.050 [1.27]
0.875 [2.23]
0.150 [3.81]
0.225 [5.72]
0.313 [7.95]
0.400 [10.16]
B
0.229
0.304
0.429
0.579
0.754
0.929
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
C
0.3085
0.3835
0.5085
0.6585
0.8335
1.0085
[7.84]
[9.74]
[12.92]
[16.73]
[21.17]
[25.62]
L
.100 [2.54]
.175 [4.45]
.300 [8.89]
.450 [11.43]
.625 [15.88]
.800 [20.32]
156
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Thru-Hole Connectors — Horizontal, 1 Row to 2 Row, .050 Spacing
DUALOBE Rectangular
Connectors
.050
Typ.
[1.27]
.140 [3.56]
.273
[6.93] Typ.
.223
[5.66]
.112
[2.84] 2 Plcs.
B
Receptacle
B
5
Position 1
L
Product Facts
n
n
n
n
.038
[.97] Typ.
Plastic or Metal Shell
Standard Sizes: 5, 9, 15,
25, 37, and 51
Contact Tyco Electronics for
custom configurations
Suggested thru-hole
layouts are available on the
referenced drawings on the
Tyco Electronics website
.043
[1.09] 2 Plcs.
.086
[2.18]
.090
[2.29] Typ.
C
Receptacle Assembly
Drawing Number 1589469
Receptacle Assembly, Horizontal Mount,
Through Hole, 1 Row to 2 Row,
.050 Spacing, Plastic or Metal
.075
[1.91] 2 Plcs.
1589469
.140
[3.56]
.205
[5.21]
.050
[1.27] Typ.
.255
[6.48] Typ.
.117
[2.97]
B
Position 1
C
.038
[.97] Typ.
.043
[1.09] 2 Plcs.
.086
[2.18]
.090
[2.29] Typ.
L
Plug Assembly
Drawing Number 1589471
Plug Assembly, Horizontal Mount,
Through Hole, 1 Row to 2 Row,
.050 Spacing, Plastic or Metal
Size
5
9
15
25
37
51
0.233
0.333
0.483
0.733
1.033
1.383
B
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
Dimensions
C
0.3085 [7.84]
0.4085 [10.38]
0.5585 [14.19]
0.8085 [20.54]
1.1085 [28.16]
1.4585 [37.05]
1589471
L
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
157
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Thru-Hole Connectors — Horizontal, 2 Row to 4 Row, .050 Spacing
.050
Typ.
[1.27]
.240
[6.10]
.112
[2.84] 2 Plcs.
.223
[5.66]
.273
[6.93] Typ.
Receptacle
B
Position 1
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Contact Tyco Electronics for
custom configurations
Suggested thru-hole
layouts are available on the
referenced drawings on the
Tyco Electronics website
B
.126
[3.20]
.038
[.97] Typ.
.040
[1.02] Typ.
.058
[1.47]
2 Plcs.
L
Position ‘Size’
.090
[2.29] Typ.
C
Receptacle Assembly
Drawing Number
1589487 Assembly, Horizontal Mount,
Receptacle
Through Hole, 2 Row to 4 Row,
.050 Spacing, Plastic or Metal
1589487
.075
[1.91] 2 Plcs.
.240
[6.10]
.205
[5.21]
.117
[2.97]
.050
[1.27] Typ.
.255
Typ.
[6.48]
B
Position 1
C
.126
[3.20]
.058
[1.47] 2 Plcs.
.038
[.97] Typ.
.040
Typ.
[1.02]
.090
Typ.
[2.29]
Position ‘Size’
L
Plug Assembly
Drawing Number 1589481
Size
9
15
25
37
51
65
0.229
0.304
0.429
0.579
0.754
0.929
B
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
Dimensions
C
0.3085 [7.84]
0.3835 [9.74]
0.5085 [12.92]
0.6585 [16.73]
0.8335 [21.17]
1.0085 [25.62]
L
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
0.800 [20.32]
158
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Thru-Hole Connectors — Vertical Mount, 1 Row to 2 Row Connectors, .050 Spacing
DUALOBE Rectangular
Connectors
C
L
Position 1
.038
[.97] Typ.
.086
[2.18]
.043
[1.09] 2 Plcs.
B
Receptacle
Product Facts
n
n
n
n
Plastic or Metal Shell
Standard Sizes: 5, 9, 15,
25, 37 and 51
Contact Tyco Electronics for
custom configurations
Suggested thru-hole
layouts are available on the
referenced drawings on the
Tyco Electronics website
5
.140
[3.56]
.117
[2.97]
.205
[5.21]
.296
[7.52]
.050
[1.27] Typ.
.020
Typ.
[0.51]
.090
Lead Length Typ.
[2.29]
Plug Assembly
Drawing Number 1589461
L
Position 1
.038
[.97] Typ.
Plug Assembly, Vertical Mount,
Through Hole, 1 to 2 Row,
.050 Spacing, Plastic or Metal
1589461
.086
[2.18]
.043
[1.09] 2 Plcs.
B
C
B
.140
[3.56]
.112
2 Plcs.
[2.84]
.223
[5.66]
.314
[7.98]
.050
[1.27] Typ.
.020
Typ.
[0.51]
.090
[2.29] Lead Length Typ.
Receptacle Assembly
Drawing Number 1589470
Receptacle Assembly, Vertical Mount,
Through Hole, 1 Row to 2 Row,
Dimensions .050 Spacing, Plastic or Metal
Size
5
9
15
25
37
51
0.233
0.333
0.483
0.733
1.033
1.383
B
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
C
0.3085 [7.84]
0.4085 [10.38]
0.5585 [14.19]
0.8085 [20.54]
1.1085 [28.16]
1.4585 [37.05]
1589470
L
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
159
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Thru-Hole Connectors — Vertical Mount, 2 Row to 4 Row Connectors, .050 Spacing
Position 1
C
.038
Typ.
[.97]
.040
[1.02] Typ.
.058
[1.47] 2 Plcs.
.126
[3.20]
L
Receptacle
Product Facts
n
n
n
n
.24
[6.10]
B
.117
[2.97]
.205
[5.21]
Plastic or Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Contact Tyco Electronics for
custom configurations
Suggested thru-hole
layouts are available on the
referenced drawings on the
Tyco Electronics website
.286
[7.26]
.090
Lead Length Typ.
[2.29]
.020
[0.51] Typ.
.050
[1.27] Typ.
Plug Assembly
Drawing Number 1589482
Plug Assembly, Vertical Mount,
Through Hole, 2 to 4 Row,
.050 Spacing, Plastic or Metal
C
.038
[.97] Typ.
.040
[1.02] Typ.
.126
[3.20]
1589482
.058
[1.47]
2 Plcs.
L
Position ‘Size’
B
B
.223
[5.66]
.24
[6.10]
.304
[7.72]
.090
Lead Length Typ.
[2.29]
.050
[1.27] Typ.
.020
[0.51] Typ.
Receptacle Assembly
Drawing Number 1589488
Receptacle Assembly, Vertical Mount,
Size
9
15
25
37
51
65
0.229
0.304
0.429
0.579
0.754
0.929
B
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
Dimensions Through Hole, 2 to 4 Row,
.050 Spacing, Plastic or Metal
C
1589488
0.3085 [7.84]
0.100
0.3835 [9.74]
0.175
0.5085 [12.92]
0.300
0.6585 [16.73]
0.450
0.8335 [21.17]
0.625
1.0085 [25.62]
0.800
L
[2.54]
[4.45]
[7.62]
[11.43]
[15.88]
[20.32]
160
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Numbering Guideline for Surface Mount and Thru-Hole Connectors
DUALOBE Rectangular
Connectors
DUALOBE Connectors - Surface Mount and Thru Hole Terminations
S
X
X
XXX
XX(X)
X
X
Class
Threads/Jackscrew
S Dualobe
Threads (Receptacles Only)
Jackscrews (Plugs Only)
Rows
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrews
S 1 Row
Q Thread for 1.2 mm Jackscrews
N 1.0 mm Captive Jackscrews
Q 1.2 mm Captive Jackscrews
T 2 Row
Mounting Hardware
Type
L
LCP (Plastic)
M Metal (Al, Ni Plate)
Positions
005
5 Position (single row only)
009
9 Position
A
1.2 mm x .160”
K
1.0 mm x .200” w/ 4 standoffs
C
1.0 mm x .200” w/ 2 standoffs
L
1.2 mm x .200” w/ 2 standoffs
D
1.2 mm x .160” w/ 2 standoffs
P
1.2 mm x .200” w/ 4 standoffs
H
1.0 mm x .160”
S
1.0 mm x .160” w/ 2 standoffs
I
1.2 mm x .200”
015 15 Position
Configurations
025 25 Position
B2
Plug, Horizontal SMT
037 37 Position
B4
Plug, Vertical SMT
051 51 Position
B42 Plug, Vertical SMT, .020” Extended Leads
065 65 Position (two row only)
B44 Plug, Vertical SMT, .040” Extended Leads
5
B43 Plug, Vertical SMT, .020” Extended Leads, 2 side exit (single row only)
B45 Plug, Vertical SMT, .040” Extended Leads, 2 side exit (single row only)
L2
Receptacle, Horizontal SMT
L4
Receptacle, Vertical SMT
L42 Receptacle, Vertical SMT, .020” Extended Leads
L44 Receptacle, Vertical SMT, .040” Extended Leads
L43 Receptacle, Vertical SMT, .020” Extended Leads, 2 side exit (single row only)
L45 Receptacle, Vertical SMT, .040” Extended Leads, 2 side exit (single row only)
L8
Receptacle, Vertical SMT, w/ integrated standoffs (metal shell only)
L82 Receptacle, Vertical SMT, w/ integrated standoffs, .020” Extended Leads (metal shell only)
L84 Receptacle, Vertical SMT, w/ integrated standoffs, .040” Extended Leads (metal shell only)
L83 Receptacle, Vertical SMT, w/ integrated standoffs, .020” Extended Leads (single row and metal shell only)
L85 Receptacle, Vertical SMT, w/ integrated standoffs, .040” Extended Leads (single row and metal shell only)
C5
Plug, Vertical Mount, Thru Hole
C6
Plug, Horizontal Mount, Thru Hole
M5
Receptacle, Vertical Mount, Thru Hole
M6
Receptacle, Horizontal Mount, Thru Hole
161
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Flex Termination “Duckbill” Connectors — Two Row
Product Facts
n
n
n
.075
[1.91] 2 Plcs.
Plastic or Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Contact Tyco Electronics for
custom configurations
.010
Typ.
[0.25]
.100
[2.54] Typ.
.086
[2.18] Typ.
.117
[2.97]
.205
[5.21]
Jackscrews Omitted for
Clarity
B
A
Max.
Position 1
Position
‘Size’
Position 1
C
.058
2 Plcs.
[1.47]
.038
Typ.
[.97]
.040
[1.02] Typ.
.086
[2.18] Typ.
.050
[1.27] Typ.
.025
[0.64] Typ.
E
.126
[3.20]
.075
[1.91] 2 Plcs.
.100
[2.54] Typ.
Flex Top View
Size 15 shown for reference
Position ‘Size’
L
.017
[0.43]
F
Plug Assembly
Drawing Number 1589066
.010
[0.25] Typ.
.086
[2.18] Typ.
.117
[2.97]
.205
[5.21]
B
A
Max.
Position 1
Position
‘Size’
Position 1
.058
[1.47] 2 Plcs.
C
.038
[.97] Typ.
.040
[1.02] Typ.
.086
[2.18] Typ.
.050
[1.27] Typ.
.126
[3.20]
L
Plug Assembly, Two Ro
Duckbill Lead
Plastic or Me
.017
[0.43]
.025
[0.64] Typ.
E
D
Flex Top View
Size 15 shown for reference
Position ‘Size’
1589066
Flex Bottom View
Typical Flex Pad Layout
Size
9
15
25
37
51
65
A
0.150 [3.81]
0.225 [5.72]
0.350 [8.89]
0.500 [12.7]
0.675 [17.1]
0.850 [21.6]
B
0.229 [5.82]
0.304 [7.72]
0.429 [10.90]
0.579 [14.71]
0.754 [19.15]
0.929 [23.60]
Dimensions
C
0.3085 [ 7.84]
0.3835 [ 9.74]
0.5085 [12.92]
0.6585 [16.73]
0.8335 [21.17]
1.0085 [25.62]
D
0.0500 [1.27]
0.0875 [2.22]
0.1500 [3.81]
0.2250 [5.72]
0.3125 [7.94]
0.4000 [10.2]
E
0.0375 [0.95]
0.0750 [1.90]
0.1375 [3.49]
0.2125 [5.40]
0.3000 [7.62]
0.3875 [9.84]
L
0.100 [ 2.54]
0.175 [ 4.45]
0.300 [ 7.62]
0.450 [11.43]
0.625 [15.88]
0.800 [20.32]
Plug Assembly, Two Row Dualobe,
Duckbill Leads,
Plastic or Metal
162
1589066
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Flex Termination “Duckbill” Connectors — Two Row (Continued)
DUALOBE Rectangular
Connectors
.010
[0.25] Typ.
.100
[2.54] Typ.
.086
[2.18] Typ.
.112
[2.84] 2 Plcs.
.223
[5.66]
5
B
.100
Typ.
[2.54]
Position 1
.038
Typ.
[.97]
.040
[1.02] Typ.
B
.010
.058
Typ.
2 Plcs.
[0.25]
[1.47]
.126
[3.20]
A
Max.
.086
[2.18] Typ.
.086
[2.18] Typ.
.050
[1.27] Typ.
.017
[0.43]
.112
[2.84] 2 Plcs.
.223
[5.66]
Position 1
L
Position ‘Size’
.025
[0.64] Typ.
E
C
Flex Top View
Size 15 shown for reference
Receptacle Assembly
Drawing Number 1589067
B
.058
[1.47] 2 Plcs.
n ‘Size’
A
Max.
Position 1
.038
[.97] Typ.
.040
[1.02] Typ.
B
Position 1
Position
‘Size’
.086
[2.18] Typ.
.050
Typ.
[1.27]
.017
[0.43]
.025
[0.64] Typ.
L
D
E
C
Flex Top View
Size 15 shown for reference
Flex Bottom View
Typical Flex Pad Layout
Part Numbering Guideline for Flex Termination “Duckbill” Connectors
DUALOBE Connectors - “Duckbill” Termination
S
T
X
XXX
11378
XX
Class
Receptacle Assem
Duc
Plas
X
Threads/Jackscrew
S Dualobe
Threads (Receptacles Only)
Jackscrews (Plugs Only)
Rows
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrews
T 2 Row
Q Thread for 1.2 mm Jackscrews
N 1.0 mm Captive Jackscrews
Q 1.2 mm Captive Jackscrews
Configuration
Type
L
LCP (Plastic)
M Metal (Al, Ni Plate)
PC
Plug
SC
Receptacle
Positions
009
9 Position
015 15 Position
Receptacle Assembly, Two Row Dualobe,
Duckbill Leads,
Plastic or Metal
“Duckbill” Termination
1589067
025 25 Position
Termination Code
037 37 Position
11378
051 51 Position
065 65 Position
163
Catalog 1308638
Revised 7-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Solder Cup Connectors — Single Row
Product Facts
n
n
n
L
.025
[.64] Pitch Type
Plastic or Metal Shell
Standard Sizes: 5, 9, 15,
25, 37 and 51
Contact Tyco Electronics for
custom configurations
.038
[.97] Typ.
Position 1
.075
[1.91] 2 Plcs.
.055
Typ.
[1.40]
.205
[5.21]
.117
[2.97]
Position 1
B
.086
[2.18]
L
.043
[1.09] 2 Plcs.
.025
[.64] Pitch Type
.038
Typ.
[.97]
C
Plug Assembly
Drawing Number 1589051
Position 1
Plug Assembly, Single Row Dualobe,
.075
Solder Cup Termination,
[1.91] Typ.
Plastic or Metal
1589051
.112
2 Plcs.
[2.84]
.223
[5.66]
B
B
Position 1
.086
[2.18]
.043
[1.09] 2 Plcs.
C
Receptacle Assembly
Drawing Number 1589052
Receptacle Assembly, Single Row Dualo
Solder Cup Termination,
Plastic or Metal
1589052
Size
5
9
15
25
37
51
0.233
0.333
0.483
0.733
1.033
1.383
B
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
Dimensions
C
0.3085 [7.84]
0.4085 [10.38]
0.5585 [14.19]
0.8085 [20.54]
1.1085 [28.16]
1.4585 [37.05]
L
0.100 [2.54]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
164
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Solder Cup Connectors — Two Row
DUALOBE Rectangular
Connectors
L
.025
Pitch Type
[.64]
.038
Typ.
[.97]
.040
Typ.
[1.02]
.0125
[0.32] Offset
.075
[1.91] 2 Plcs.
Plug
.205
[5.21]
.117
[2.97]
B
Position 1
Receptacle
5
.055
Typ.
[1.40]
.126
[3.20]
.058
[1.47] 2 Plcs.
L
C
.025
[.64] Pitch Type
.040
[1.02] Typ.
Position ‘Size’
Product Facts
n
n
n
Plastic or Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Contact Tyco Electronics for
custom configurations
Plug Assembly
Drawing Number 1589053
.0125
.038
Plug Assembly,[.32]
TwoOffset
Row Dualobe, [.97] Typ.
Solder Cup Termination,
.075
Plastic or Metal
[1.91] Typ.
1589053
.112
[2.84] 2 Plcs.
.223
[5.66]
B
B
Position 1
.126
[3.20]
.058
[1.47] 2 Plcs.
Position ‘Size’
C
Receptacle Assembly
Drawing Number 1589054
Receptacle Assembly, Two Row Dua
Solder Cup Termination,
Plastic or Metal
Size
9
15
25
37
51
65
0.229
0.304
0.429
0.579
0.754
0.929
B
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
Dimensions
C
0.3085 [7.84]
0.3835 [9.74]
0.5085 [12.92]
0.6585 [16.73]
0.8335 [21.17]
1.0085 [25.62]
L
0.100 [2.54]
0.175 [4.45]
0.300 [7.62]
0.450 [11.43]
0.625 [15.88]
0.800 [20.32]
1589054
165
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Numbering Guideline for Solder Cup Connectors
DUALOBE Connectors - Solder Cup Termination
S
X
X
XXX
11500
XX
Class
X
Threads/Jackscrew
S Dualobe
Threads (Receptacles Only)
Jackscrews (Plugs Only)
Rows
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrews
S 1 Row
Q Thread for 1.2 mm Jackscrews
N 1.0 mm Captive Jackscrews
Q 1.2 mm Captive Jackscrews
T 2 Row
Configuration
Type
L
LCP (Plastic)
M Metal (Al, Ni Plate)
PC
Plug
SC
Receptacle
Positions
005
5 Position (single row only)
009
9 Position
015 15 Position
Termination Code
025 25 Position
11500
Solder Cup Termination
037 37 Position
051 51 Position
065 65 Position (two row only)
166
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Panel Mount Connectors — Single Row, Flying Leads
DUALOBE Rectangular
Connectors
Product Facts
n
n
n
n
Metal Shell
Standard Sizes: 5, 9, 15,
25, 37 and 51
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
.050
[1.27]
5
.062
[1.57]
.223
[5.66]
Position 1
A
.038
Typ.
[.97]
B
.043
[1.09] 4 Plcs.
.166
[4.22]
.086
[2.18] 2 Plcs.
.083
[2.11] 2 Plcs.
L
C
D
Receptacle Assembly
Drawing Number 1589851
Receptacle Assembly,
Panel Mount, Single Row Dualobe,
Flying Leads, Metal Shell
1589851
Size
5
9
15
25
37
51
0.470
0.570
0.720
0.970
1.270
1.620
A
[11.94]
[14.48]
[18.29]
[24.64]
[32.26]
[14.15]
0.233
0.333
0.483
0.733
1.033
1.383
B
[5.92]
[8.46]
[12.27]
[18.62]
[26.24]
[35.13]
Dimensions
C
0.310 [7.87]
0.410 [10.41]
0.560 [14.22]
0.810 [20.57]
1.110 [28.19]
1.460 [37.08]
0.620
0.720
0.870
1.120
1.420
1.770
D
[15.75]
[18.29]
[22.10]
[28.45]
[36.07]
[44.96]
0.100
0.200
0.350
0.600
0.900
1.250
L
[2.54]
[5.08]
[8.89]
[15.24]
[22.86]
[31.75]
167
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Panel Mount Connectors — Two Row, Flying Leads
.050
[1.27]
.223
[5.66]
Receptacle
Product Facts
n
n
n
.062
[1.57]
Position 1
A
Metal Shell
Standard Sizes: 9, 15, 25,
37, 51 and 65
Contact Tyco Electronics for
custom configurations
.038
[.97] Typ.
.040
Typ.
[1.02]
B
.058
[1.47] 2 Plcs.
.206
[5.23]
.063
2 Plcs.
[1.60]
L
C
Position ‘Size’
D
Receptacle Assembly
Drawing Number 1589050
Receptacle Assembly,
Panel Mount, Two Row Dualobe,
Flying Leads, Metal Shell
1589050
Size
9
15
25
37
51
65
0.470
0.545
0.670
0.820
0.995
1.170
A
[11.94]
[13.84]
[17.02]
[20.83]
[25.27]
[20.72]
0.229
0.304
0.429
0.579
0.754
0.929
B
[5.82]
[7.72]
[10.90]
[14.71]
[19.15]
[23.60]
Dimensions
C
0.310 [7.87]
0.385 [9.78]
0.510 [12.95]
0.660 [16.76]
0.835 [21.21]
1.010 [25.65]
0.620
0.695
0.820
0.970
1.145
1.320
D
[15.75]
[17.65]
[20.83]
[24.64]
[29.08]
[33.53]
0.100
0.175
0.300
0.450
0.625
0.800
L
[2.54]
[4.45]
[7.62]
[11.43]
[15.88]
[20.32]
168
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Numbering Guideline for Panel Mount Connectors
DUALOBE Rectangular
Connectors
DUALOBE Connectors - Panel Mount
P
X
M
XXX
SC
XX
X
XXX
X
Class
Jackscrew Threads
P Panel Mount
Threads
Rows
N Thread for 1.0 mm Jackscrews
S 1 Row
Q Thread for 1.2 mm Jackscrews
T 2 Row
Conductor Length
Type
M Metal (Al, Ni Plate)
Positions
005
5 Position (single row only)
009
9 Position
XXX
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX
A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX
An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
Conductor Type
015 15 Position
DX
White Teflon
DM
Color Coded Teflon per MIL-STD-681
025 25 Position
DY
White PTFE per M16878/6
DT
White Tefzel per M22759/33
037 37 Position
DC
Color Coded Teflon
GX
Teflon Ribbon Cable
051 51 Position
065 65 Position (two row only)
Conductor Size/Strands
0
28 AWG Solid
Configuration
1
30 AWG Solid
SC Receptacle
2
30 AWG 7 Strand
3
32 AWG 7 Strand
4
34 AWG 7 Strand
169
169
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
5
DUALOBE Rectangular Connectors
Part Number Index Cross Reference
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
SSL005PC0DC006N
0-1589455-2
SSL005PC0DC012N
SSL005PC0DX012M
SSL005PC2DC002N
SSL005PC2DC004
SSL005PC2DC006
SSL005PC2DC006N
SSL005PC2DC012N
SSL005PC2DX006N
SSL005SC0DC006N
SSL005SC2DC006N
0-1589455-3
7-1589456-3
2-1589827-7
0-1589455-4
0-1589455-5
0-1589455-6
6-1589456-4
0-1589455-7
0-1589457-1
0-1589457-2
SSL005SC2DC012N
SSL005SC3DM024N
SSL009PC0DC006N
7-1589457-6
0-1589457-3
0-1589455-8
SSL015SC2DC005N
SSL015SC2DC006N
SSL015SC2DC012N
SSL015SC2DC024N
SSL015SC2DC036N
SSL025PC0DC012M
SSL025PC2DC006
SSL025PC2DC006N
SSL025PC2DC012
SSL025PC2DC018N
SSL025PC2DC020N
SSL025PC2DC024M
SSL025PC2DC024N
SSL025PC2DM018M
SSL025PC2DX012Q
SSL009PC0DMM03N
SSL009PC0DX012M
SSL009PC2DC001N
SSL009PC2DC003
SSL009PC2DC006N
SSL009PC2DC009N
SSL009PC2DC012
SSL009PC2DC012M
SSL009PC2DC012N
SSL009PC2DC012Q
SSL009PC2DC018N
SSL009PC2DC024N
SSL009PC2DCC03N
SSL009PC2DCC10N
SSL009PC2DM010N
SSL009PC2DM018M
SSL009PC2DMC60Q
SSL009SC0DMM03N
SSL009SC2DC003
SSL009SC2DC006N
SSL009SC2DC012
SSL009SC2DC012Q
SSL009SC2DM006N
SSL009SC2GX006
SSL015PC0DC012N
SSL015PC0DMM03N
SSL015PC0DX012M
SSL015PC2DC003N
SSL015PC2DC006N
SSL015PC2DC008N
SSL015PC2DC012
SSL015PC2DC012M
SSL015PC2DC012N
SSL015PC2DC016N
SSL015PC2DC018
SSL015PC2DC018N
SSL015PC2DC024
SSL015PC2DC024M
SSL015PC2DC024N
SSL015PC2DC036N
SSL015PC2DM018M
SSL015SC0DMM03N
0-1589455-9
7-1589456-4
1-1589455-0
1-1589455-1
1-1589455-2
1-1589455-3
1-1589455-4
1-1589455-5
1-1589455-6
9-1589456-2
1-1589455-7
7-1589456-9
1-1589455-8
1-1589455-9
2-1589455-0
2-1589455-1
2-1589455-2
0-1589457-4
0-1589457-5
0-1589457-6
0-1589457-7
9-1589457-2
0-1589457-8
1-1589457-0
0-1589827-6
2-1589455-3
7-1589456-5
0-1589827-3
2-1589455-4
2-1589455-5
2-1589455-6
0-1589827-2
2-1589455-7
0-1589827-8
2-1589455-8
1-1589827-1
2-1589455-9
7-1589456-2
0-1589827-9
0-1589827-5
3-1589455-0
1-1589457-1
SSL025PC2GX006N
SSL025SC0DC012N
SSL025SC2DC006
SSL025SC2DC006N
SSL025SC2DC012N
SSL025SC2DC036N
SSL037PC2DC012N
SSL037PC2DC018N
SSL037PC2DC024N
SSL037PC2DC096N
SSL037SC2DC012N
SSL051PC0DX012M
SSL051PC2DC012N
SSM005PC0DC024N
SSM005PC0DC036N
SSM005PC0DX024N
SSM005PC2DC006
SSM005PC2DC006N
SSM005PC2DC012M
SSM005PC2DC012N
SSM005PC2DC012Q
SSM005PC2DC018N
SSM005PC2DC036N
SSM005PC2DC040N
SSM005PC2DCC20N
SSM005PC2DT012N
SSM005PC2DX012N
SSM005PC2DX018N
SSM005PC2DX024N
SSM005PC4DX012N
SSM005PC4DXM01
SSM005SC0DC024N
SSM005SC0DC036N
SSM005SC0DX024N
SSM005SC2DC006N
SSM005SC2DC012N
SSM005SC2DC012Q
SSM005SC2DC018N
SSM005SC2DC040N
SSM005SC2DT012N
SSM005SC2DX024HN
SSM005SC4DX012N
Wired Connectors
Tyco
Part Number
9-1589457-6
1-1589457-2
1-1589457-3
1-1589457-4
8-1589457-9
8-1589456-5
3-1589455-1
3-1589455-2
3-1589455-3
9-1589456-6
3-1589455-4
0-1589827-1
7-1589456-8
3-1589455-5
3-1589455-6
3-1589455-7
8-1589457-5
1-1589457-5
1-1589457-6
1-1589457-7
8-1589457-8
3-1589455-8
8-1589456-0
3-1589455-9
4-1589455-0
1-1589457-8
7-1589456-6
4-1589455-1
2-1589827-2
7-1589456-0
8-1589456-9
4-1589455-2
4-1589455-3
7-1589456-1
4-1589455-4
6-1589456-3
4-1589455-5
4-1589455-6
4-1589455-7
9-1589456-7
1-1589827-6
4-1589455-8
4-1589455-9
5-1589455-0
5-1589455-1
5-1589455-2
0-1589901-5
8-1589457-0
9-1589457-0
1-1589457-9
2-1589457-0
7-1589457-4
2-1589457-1
2-1589457-2
9-1589457-7
2-1589457-3
2-1589457-4
Nanonics
Part Number
SSM009PC0DC012N
SSM009PC0DC024N
SSM009PC0DM024N
SSM009PC0DX012N
SSM009PC2DC003
SSM009PC2DC003N
SSM009PC2DC006
SSM009PC2DC006N
SSM009PC2DC010N
SSM009PC2DC012
SSM009PC2DC012M
SSM009PC2DC012N
SSM009PC2DC018
SSM009PC2DC018N
SSM009PC2DC024
SSM009PC2DC024N
SSM009PC2DC036N
SSM009PC2DC060N
SSM009PC2DC084N
SSM009PC2DCC10N
SSM009PC2DCM01N
SSM009PC2DCM02N
SSM009PC2DM010N
SSM009PC2DM018N
SSM009PC2DM024
SSM009PC2DM024N
SSM009PC2DT012N
SSM009PC2DT024N
SSM009PC2DX005N
SSM009PC2DX006N
SSM009PC2DX010N
SSM009PC2DX012N
SSM009PC2DX018N
SSM009PC2DX024N
SSM009PC2DY006N
SSM009PC3DC018N
SSM009SC0DC024N
SSM009SC1DC002
SSM009SC2DC006HN
SSM009SC2DC006N
SSM009SC2DC012N
SSM009SC2DC018N
SSM009SC2DC024N
SSM009SC2DC036N
SSM009SC2DC060N
SSM009SC2DC084N
SSM009SC2DM006N
SSM009SC2DM012
SSM009SC2DT012N
SSM009SC2DX012N
SSM009SC2DX018N
SSM009SC2DX024HN
SSM009SC2DX036HN
SSM015PC0DC012N
SSM015PC0DC018N
SSM015PC0DC024N
SSM015PC0DMM02N
Tyco
Part Number
0-1589827-7
5-1589455-3
5-1589455-4
5-1589455-5
5-1589455-6
5-1589455-7
5-1589455-8
5-1589455-9
6-1589455-0
6-1589455-1
6-1589455-2
6-1589455-3
6-1589455-4
6-1589455-5
6-1589455-6
6-1589455-7
6-1589455-8
6-1589455-9
8-1589456-8
7-1589455-0
7-1589455-1
8-1589456-7
7-1589455-2
7-1589455-3
7-1589455-4
6-1589456-5
1-1589827-7
1-1589827-0
7-1589455-5
7-1589455-6
7-1589455-7
7-1589455-8
7-1589455-9
8-1589455-0
8-1589455-1
8-1589455-2
0-1589901-6
2-1589457-5
2-1589457-6
2-1589457-7
2-1589457-9
3-1589457-0
3-1589457-1
3-1589457-2
8-1589457-3
8-1589457-7
3-1589457-4
3-1589457-5
9-1589457-8
3-1589457-6
3-1589457-7
3-1589457-8
3-1589457-9
8-1589455-3
8-1589455-4
2-1589827-3
8-1589455-5
Nanonics
Part Number
SSM015PC2DC003N
SSM015PC2DC006
SSM015PC2DC006N
SSM015PC2DC008N
SSM015PC2DC012
SSM015PC2DC012M
SSM015PC2DC012N
SSM015PC2DC018
SSM015PC2DC018N
SSM015PC2DC024
SSM015PC2DC024N
SSM015PC2DC036N
SSM015PC2DC048N
SSM015PC2DC060N
SSM015PC2DM012N
SSM015PC2DM024N
SSM015PC2DMC20N
SSM015PC2DMC30N
SSM015PC2DMM02N
SSM015PC2DT012N
SSM015PC2DX006N
SSM015PC2DX006Q
SSM015PC2DX008
SSM015PC2DX012N
SSM015PC2DX024N
SSM015PC2DY003N
SSM015PC2DY006N
SSM015PC2DY012N
SSM015PC2GX018N
SSM015PC4DX030N
SSM015SC0DC012N
SSM015SC0DC024N
SSM015SC2DC003N
SSM015SC2DC006N
SSM015SC2DC012N
SSM015SC2DC018
SSM015SC2DC018N
SSM015SC2DC024N
SSM015SC2DC036N
SSM015SC2DC048N
SSM015SC2DM024N
SSM015SC2DT012N
SSM015SC2DX006N
SSM015SC2DX012HN
SSM015SC2DX018N
SSM015SC2DX024HN
SSM015SC2DY012N
SSM015SC2DY018N
SSM015SC4DX005N
SSM025PC0DC024N
SSM025PC0DC036N
SSM025PC2DC003N
SSM025PC2DC006Q
SSM025PC2DC010N
SSM025PC2DC012
SSM025PC2DC012N
SSM025PC2DC012Q
Tyco
Part Number
8-1589455-6
8-1589455-7
8-1589455-8
8-1589455-9
9-1589455-0
6-1589456-6
9-1589455-1
9-1589455-2
9-1589455-3
2-1589827-8
9-1589455-4
9-1589455-5
9-1589455-6
9-1589455-7
9-1589456-4
9-1589455-8
9-1589455-9
3-1589827-0
0-1589456-1
0-1589456-2
0-1589456-3
0-1589456-4
0-1589456-5
0-1589456-6
0-1589456-7
0-1589456-8
0-1589456-9
1-1589456-0
1-1589456-1
1-1589456-2
4-1589457-0
0-1589901-7
4-1589457-1
4-1589457-2
4-1589457-3
4-1589457-4
9-1589457-4
9-1589457-3
4-1589457-5
7-1589457-5
7-1589457-7
9-1589457-9
4-1589457-8
4-1589457-9
5-1589457-0
5-1589457-2
5-1589457-3
5-1589457-4
5-1589457-5
2-1589827-4
6-1589456-9
1-1589456-4
1-1589456-5
1-1589456-6
1-1589456-7
1-1589456-8
8-1589456-1
170
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
SSM025PC2DC018
SSM025PC2DC018N
SSM025PC2DC024N
1-1589456-9
2-1589456-0
9-1589456-1
SSM037SC2DC024N
SSM037SC2DT012N
SSM037SC2DTC30N
1-1589901-1
0-1589901-2
9-1589457-5
STL009PC3DX030N
STL009SC0DC006N
STL009SC0DC012N
2-1589472-1
3-1589777-8
8-1589477-3
STL025PC2DC018Q
STL025PC2DC020N
STL025PC2DC030N
7-1589788-4
4-1589472-8
4-1589472-9
SSM025PC2DC025N
SSM025PC2DC030N
SSM025PC2DC036N
SSM025PC2DCC30N
SSM025PC2DCC50N
SSM025PC2DM018Q
SSM025PC2DM024N
SSM025PC2DT012N
SSM025PC2DX006N
2-1589456-1
2-1589456-2
2-1589456-3
2-1589456-4
1-1589827-5
9-1589456-9
8-1589456-3
1-1589827-8
2-1589456-5
SSM051PC0DC024N
SSM051PC2DC006
SSM051PC2DC006N
SSM051PC2DC012N
SSM051PC2DC018
SSM051PC2DC024
SSM051PC2DC024N
SSM051PC2DC030N
SSM051PC2DCC06Q
2-1589827-6
4-1589456-5
4-1589456-6
4-1589456-7
4-1589456-8
4-1589456-9
5-1589456-0
5-1589456-1
5-1589456-2
STL009SC0DC030N
STL009SC2DC012
STL009SC2DC012N
STL009SC2DC018N
STL009SC2DC036N
STL009SC2DM036N
STL009SC3DX024N
STL015PC0DC006N
STL015PC0DC012Q
3-1589777-9
0-1589476-6
0-1589476-7
8-1589477-4
0-1589476-8
2-1589777-7
0-1589476-9
2-1589472-2
2-1589472-3
STL025PC2DM010N
STL025PC2DT024N
STL025PC2DY006N
STL025PC2GX036
STL025PC3DX006N
STL025PC3DX030N
STL025PC4DX030N
STL025SC2DC001N
STL025SC2DC006N
5-1589472-0
6-1589475-2
9-1589475-5
4-1589788-7
5-1589472-1
9-1589475-2
5-1589472-2
1-1589476-9
2-1589476-0
SSM025PC2DX012N
SSM025PC2DX018N
SSM025PC2DX024N
2-1589456-6
2-1589456-7
2-1589456-8
SSM051PC2DCC30N
SSM051PC2DM012Q
SSM051PC2DM018N
9-1589456-3
5-1589456-3
6-1589456-7
STL015PC0DMM03N
STL015PC1DNC50N
STL015PC2DC006
2-1589472-4
2-1589472-5
2-1589472-6
STL025SC2DC012N
STL025SC2DC030N
STL025SC2DC036N
2-1589476-1
2-1589476-2
2-1589476-3
SSM025PC2GX006
SSM025PC2GX018N
SSM025PC3DY006N
SSM025PC4DX015N
SSM025SC0DC024N
SSM025SC0DC036N
SSM025SC2DC006N
SSM025SC2DC012N
SSM025SC2DC018
SSM025SC2DC024N
SSM025SC2DT012N
SSM025SC2DX006N
SSM025SC2DX018N
SSM025SC2DX024HN
SSM025SC2DX024N
SSM025SC3DY006N
SSM037PC0DC006M
SSM037PC0DC009Q
SSM037PC0DC024N
SSM037PC0DC036N
SSM037PC2DC006
SSM037PC2DC006N
SSM037PC2DC012
SSM037PC2DC012N
SSM037PC2DC012Q
SSM037PC2DC015N
SSM037PC2DC018
SSM037PC2DC018M
SSM037PC2DC018N
SSM037PC2DC024N
SSM037PC2DCM01N
SSM037PC2DM024N
SSM037PC2DT012N
SSM037PC2DTC30N
SSM037PC2DX012Q
SSM037PC2DX018N
SSM037PC2GXC30N
SSM037PC4DX018N
SSM037SC0DC024N
SSM037SC0DC036N
SSM037SC2DC018
SSM037SC2DC018N
2-1589456-9
3-1589456-0
3-1589456-1
7-1589456-7
0-1589901-8
7-1589457-9
SSM051PC2DM024N
SSM051PC2DMC10N
SSM051PC2DMC30N
SSM051PC2DNC06Q
SSM051PC2DNC15Q
SSM051PC2DT012N
SSM051PC2DT018N
SSM051PC2DX008
SSM051PC2DX012Q
SSM051PC2DXM05Q
SSM051PC2DY012N
SSM051PC2GX012N
SSM051SC0DC024N
SSM051SC2DC018
SSM051SC2DC018N
SSM051SC2DNC15Q
SSM051SC2DT012N
SSM051SC2DT018N
SSM051SC2DT021
SSM051SC2GX012N
STL009PC0DC006N
STL009PC0DC036
STL009PC0DC036N
STL009PC0DM024N
STL009PC1DM024N
STL009PC2DC012
STL009PC2DC012M
STL009PC2DC012N
STL009PC2DC018
STL009PC2DC018M
STL009PC2DC018N
STL009PC2DC024
STL009PC2DC036N
STL009PC2DCM01N
STL009PC2DCM02N
STL009PC2DM010N
STL009PC2DM024N
STL009PC2DM030N
STL009PC2DM048N
STL009PC2DX024N
STL009PC2GX010N
STL009PC3DX024N
5-1589456-4
5-1589456-5
5-1589456-6
5-1589456-7
5-1589456-8
2-1589827-0
STL015PC2DC008
STL015PC2DC010N
STL015PC2DC012
STL015PC2DC012N
STL015PC2DC015N
STL015PC2DC015Q
STL015PC2DC018M
STL015PC2DC018N
STL015PC2DC030N
STL015PC2DC036N
STL015PC2DCC10N
STL015PC2DM010N
STL015PC2DM048N
STL015PC2DNC50N
STL015PC2DX006N
STL015PC2DX010N
STL015PC2DX036N
STL015PC2DY006N
STL015PC2GX040N
STL015SC0DMM03N
STL015SC2DC005N
STL015SC2DC008
STL015SC2DC008N
STL015SC2DC012N
STL015SC2DC018N
STL015SC2DC030N
STL015SC2DC036N
STL015SC2DX010N
STL015SC3DX024N
STL025PC0DC006N
STL025PC0DC012N
STL025PC2DC006
STL025PC2DC006M
STL025PC2DC006N
STL025PC2DC010N
STL025PC2DC012
STL025PC2DC012N
STL025PC2DC015N
STL025PC2DC015Q
STL025PC2DC018
STL025PC2DC018M
STL025PC2DC018N
2-1589472-7
2-1589472-8
2-1589472-9
3-1589472-0
3-1589472-1
8-1589475-1
STL025SC3DC004N
STL025SC3DX030N
STL037PC2DC010N
STL037PC2DC012
STL037PC2DC012M
STL037PC2DC012N
STL037PC2DC012Q
STL037PC2DC017N
STL037PC2DC018M
STL037PC2DC018N
STL037PC2DC018Q
STL037PC2DC020Q
STL037PC2DC024N
STL037PC2DC036M
STL037PC2DC036N
STL037PC2DC040N
STL037PC2DCC15N
STL037PC2DM010N
STL037PC2DM048N
STL037PC2DT024N
STL037PC2DY006N
STL037PC2DY020N
STL037PC2GX005N
STL037PC3DC001
STL037SC2DC012N
STL037SC2DC012Q
STL037SC2DC030N
STL037SC2DC036N
STL037SC2DCC15N
STL037SC3DC001N
STL037SC3DX024N
STL051PC0DXC50N
STL051PC2DC003N
STL051PC2DC006N
STL051PC2DC012
STL051PC2DC012N
STL051PC2DC018
STL051PC2DC018N
STL051PC2DC018Q
STL051PC2DC024N
STL051PC2DC036N
STL051PC2DC040N
9-1589477-4
0-1589777-5
5-1589472-3
5-1589472-4
5-1589472-5
5-1589472-6
8-1589457-6
5-1589457-6
5-1589457-7
5-1589457-9
0-1589901-1
6-1589457-0
6-1589457-1
6-1589457-3
8-1589457-1
6-1589457-4
1-1589827-2
2-1589827-9
2-1589827-5
6-1589456-8
3-1589456-2
3-1589456-3
3-1589456-4
3-1589456-5
9-1589456-5
3-1589456-6
3-1589456-7
1-1589827-3
3-1589456-8
3-1589456-9
4-1589456-0
8-1589456-4
1-1589827-9
9-1589456-8
4-1589456-2
4-1589456-3
4-1589456-4
8-1589456-6
0-1589901-9
7-1589457-8
6-1589457-5
6-1589457-6
2-1589827-1
5-1589456-9
0-1589827-4
6-1589456-0
6-1589456-1
6-1589456-2
1-1589901-0
6-1589457-7
6-1589457-8
6-1589457-9
0-1589901-3
0-1589901-4
7-1589457-1
7-1589457-3
1-1589788-1
7-1589788-6
7-1589788-5
9-1589475-9
2-1589788-9
1-1589472-1
6-1589788-9
1-1589472-2
1-1589472-3
1-1589472-4
1-1589472-5
3-1589788-7
1-1589472-6
5-1589475-3
8-1589788-4
1-1589472-7
0-1589788-1
0-1589788-2
3-1589475-0
1-1589472-8
1-1589472-9
2-1589472-0
3-1589472-2
3-1589475-9
3-1589472-3
3-1589472-4
3-1589472-5
3-1589472-6
3-1589475-1
3-1589472-7
8-1589475-0
3-1589472-8
3-1589472-9
9-1589475-4
4-1589472-0
1-1589476-0
8-1589477-5
1-1589476-1
1-1589476-2
1-1589476-3
1-1589476-4
1-1589476-5
1-1589476-6
1-1589476-7
1-1589476-8
6-1589475-4
3-1589788-3
4-1589472-1
5-1589475-7
4-1589472-2
4-1589472-3
4-1589472-4
4-1589472-5
4-1589472-6
8-1589475-2
8-1589475-6
7-1589788-3
4-1589472-7
DUALOBE Rectangular
Connectors
Nanonics
Part Number
5
8-1589788-2
5-1589472-7
5-1589472-8
5-1589472-9
2-1589788-4
6-1589472-0
3-1589788-0
6-1589472-1
6-1589472-2
6-1589472-3
6-1589472-4
6-1589472-5
3-1589475-2
6-1589475-1
9-1589475-6
7-1589475-4
6-1589472-6
5-1589788-1
2-1589476-4
2-1589476-5
2-1589476-6
2-1589476-7
2-1589476-8
2-1589777-8
2-1589476-9
6-1589472-7
6-1589472-8
6-1589472-9
7-1589472-0
7-1589472-1
7-1589472-2
3-1589788-8
2-1589788-5
7-1589472-3
7-1589472-4
7-1589472-5
171
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
STL051PC2DCC35N
STL051PC2DM048N
STL051PC2DNC50
7-1589472-6
3-1589475-3
7-1589472-7
STM009PC2DC036
STM009PC2DC036M
STM009PC2DC036N
1-1589473-0
1-1589473-1
1-1589473-2
STM009SC2DM012Q 2-1589777-0
STM009SC2DM018HN 5-1589476-8
STM009SC2DM036N 5-1589476-9
STM015PC3DM024Q
STM015PC3DX024N
STM015PC4DX012N
6-1589475-8
7-1589473-1
7-1589473-2
STL051PC2DT024N
STL051SC2DC003N
STL051SC2DC012N
STL051SC2DC018N
STL051SC2DC024N
STL051SC2DC036N
STL051SC2DC048
STL051SC2DX024
STL065PC0DC006N
6-1589475-0
3-1589476-0
3-1589476-1
3-1589476-2
3-1589476-3
0-1589777-1
3-1589476-4
3-1589476-5
6-1589475-5
STM009PC2DC060N
STM009PC2DC060Q
STM009PC2DCC10Q
STM009PC2DCC30N
STM009PC2DCC40N
STM009PC2DCC46N
STM009PC2DCC50N
STM009PC2DCC90Q
STM009PC2DCM01N
5-1589475-4
1-1589473-3
0-1589788-8
7-1589475-1
1-1589473-4
8-1589788-6
4-1589475-8
1-1589473-5
1-1589473-6
STM009SC2DT012HN
STM009SC2DT012N
STM009SC2DT030N
STM009SC2DX010N
STM009SC2DX012HN
STM009SC2DX012N
STM009SC2DXC15Q
STM009SC2DXM01Q
STM015PC0DC036N
6-1589476-0
6-1589476-1
6-1589476-2
6-1589476-3
6-1589476-4
6-1589476-5
6-1589476-6
9-1589477-9
5-1589788-4
STM015PC4DX024N
STM015SC0DC012DQ
STM015SC0DC036N
STM015SC0DM036N
STM015SC0DXC10N
STM015SC0DXC10Q
STM015SC2DC003N
STM015SC2DC004HN
STM015SC2DC006N
8-1589475-7
1-1589777-8
2-1589777-9
2-1589777-1
6-1589476-7
6-1589476-8
7-1589476-1
7-1589476-2
7-1589476-3
STL065PC0DC012N
STL065PC0DC036N
STL065PC0DC036Q
3-1589788-4
7-1589472-8
1-1589788-7
STM009PC2DCM02N
STM009PC2DM012N
STM009PC2DM012Q
8-1589788-3
1-1589473-7
1-1589473-8
STM015PC0DCM02Q
STM015PC0DM012N
STM015PC0DM024N
2-1589473-9
3-1589473-0
1-1589788-3
STM015SC2DC008HN
STM015SC2DC008Q
STM015SC2DC012HN
7-1589476-4
3-1589777-4
7-1589476-5
STL065PC2DC006
STL065PC2DC006M
STL065PC2DC006N
STL065PC2DC012N
STL065PC2DC018
STL065PC2DC018N
STL065PC2DC018Q
STL065PC2DC024N
STL065PC2DC036N
STL065PC2DC040N
STL065PC2DC072N
STL065PC2DCC10N
STL065PC2DM018N
STL065PC2DM036N
STL065PC2DT024N
STL065PC2DTC10N
STL065PC2GX036Q
STL065PC3DM072N
STL065SC2DC006N
STL065SC2DC012N
STL065SC2DC048N
STL065SC2DM036N
STL065SC3DM072N
STM009PC0DC020N
STM009PC0DM024N
STM009PC0DXC10N
STM009PC2DC003N
STM009PC2DC004N
STM009PC2DC006
STM009PC2DC006N
STM009PC2DC012
STM009PC2DC012M
STM009PC2DC012N
STM009PC2DC016N
STM009PC2DC018N
STM009PC2DC019
STM009PC2DC020Q
STM009PC2DC024
STM009PC2DC024N
STM009PC2DC024Q
STM009PC2DC028N
STM009PC2DC030N
7-1589472-9
5-1589475-8
8-1589472-0
8-1589472-1
8-1589472-2
8-1589472-3
STM009PC2DM018N
STM009PC2DM036N
STM009PC2DN036M
STM009PC2DT006Q
STM009PC2DT012N
STM009PC2DT018N
STM009PC2DT030N
STM009PC2DT036N
STM009PC2DTC45N
STM009PC2DX006Q
STM009PC2DX010N
STM009PC2DX012N
STM009PC2DX024N
STM009PC2DXC15Q
STM009PC2DXM01Q
STM009PC2DY030N
STM009PC2GX006
STM009PC2GX006N
STM009PC2GX012N
STM009PC3DM024Q
STM009SC0DX012N
STM009SC2DC003N
STM009SC2DC006
STM009SC2DC006HN
STM009SC2DC006N
STM009SC2DC012HN
STM009SC2DC012N
STM009SC2DC012Q
STM009SC2DC018HM
STM009SC2DC018HN
STM009SC2DC018N
STM009SC2DC024N
STM009SC2DC024Q
STM009SC2DC036HN
STM009SC2DC036N
STM009SC2DC048N
STM009SC2DC060Q
STM009SC2DCC46N
STM009SC2DCM01HN
STM009SC2DCM01N
STM009SC2DCM02N
STM009SC2DM012HN
1-1589473-9
2-1589473-0
2-1589473-1
7-1589475-6
7-1589788-1
2-1589473-2
STM015PC2DC003N
STM015PC2DC005N
STM015PC2DC006N
STM015PC2DC012N
STM015PC2DC012Q
STM015PC2DC016N
STM015PC2DC018N
STM015PC2DC020Q
STM015PC2DC024N
STM015PC2DC030N
STM015PC2DC036
STM015PC2DC036M
STM015PC2DC036N
STM015PC2DC048N
STM015PC2DC060Q
STM015PC2DC120N
STM015PC2DCC10Q
STM015PC2DCC30N
STM015PC2DCC90Q
STM015PC2DCM01N
STM015PC2DM018N
STM015PC2DM020N
STM015PC2DM024N
STM015PC2DM036N
STM015PC2DMM01N
STM015PC2DT006Q
STM015PC2DT012N
STM015PC2DT030N
STM015PC2DT036N
STM015PC2DTC15N
STM015PC2DTC22Q
STM015PC2DTC45N
STM015PC2DTC95Q
STM015PC2DX005Q
STM015PC2DX010N
STM015PC2DX012N
STM015PC2DX024N
STM015PC2DX030N
STM015PC2DX048N
STM015PC2DX072N
STM015PC2DXC15Q
STM015PC2GX004N
3-1589473-6
3-1589473-7
3-1589473-8
3-1589473-9
4-1589473-0
4-1589473-1
STM015SC2DC012N
STM015SC2DC015Q
STM015SC2DC016N
STM015SC2DC018N
STM015SC2DC024N
STM015SC2DC036N
STM015SC2DC036Q
STM015SC2DC060Q
STM015SC2DCC30N
STM015SC2DCC50N
STM015SC2DCM01HN
STM015SC2DM006N
STM015SC2DM010N
STM015SC2DM012HN
STM015SC2DM024N
STM015SC2DM036N
STM015SC2DMM01N
STM015SC2DT006Q
STM015SC2DT012HN
STM015SC2DT012N
STM015SC2DT030N
STM015SC2DTC90Q
STM015SC2DX005HN
STM015SC2DX006HN
STM015SC2DX010N
STM015SC2DX012N
STM015SC2DX018HN
STM015SC2DXC15Q
STM015SC4DX012Q
STM015SC4DX030N
STM015SC4DXC20N
STM025PC0DC012N
STM025PC0DC036N
STM025PC0DC060N
STM025PC0DM012N
STM025PC0DM024N
STM025PC0DM036N
STM025PC2DC003
STM025PC2DC003N
STM025PC2DC004
STM025PC2DC006
STM025PC2DC006N
7-1589476-6
1-1589777-7
7-1589476-7
7-1589476-8
7-1589476-9
8-1589476-0
2-1589788-6
8-1589472-4
8-1589472-5
8-1589472-6
8-1589472-7
8-1589472-8
8-1589472-9
9-1589472-0
6-1589475-3
8-1589788-9
9-1589472-1
9-1589472-2
3-1589476-6
3-1589476-7
3-1589476-8
3-1589476-9
4-1589476-0
9-1589472-3
1-1589788-2
9-1589472-4
9-1589472-5
9-1589472-6
9-1589472-7
9-1589472-8
9-1589472-9
7-1589788-9
0-1589473-1
0-1589473-2
0-1589473-3
0-1589473-4
0-1589473-5
0-1589473-6
0-1589473-7
8-1589475-3
0-1589473-8
0-1589473-9
2-1589473-3
9-1589475-0
2-1589475-9
3-1589475-8
2-1589473-4
4-1589788-1
2-1589473-5
2-1589473-6
8-1589475-4
2-1589788-8
5-1589788-3
6-1589788-3
3-1589788-2
6-1589475-7
4-1589476-1
8-1589477-2
4-1589476-2
4-1589476-3
4-1589476-4
4-1589476-5
4-1589476-6
4-1589476-7
4-1589476-8
4-1589476-9
5-1589476-0
5-1589476-1
2-1589777-5
5-1589476-2
5-1589476-3
5-1589476-4
5-1589476-5
4-1589777-7
5-1589476-6
9-1589477-1
5-1589476-7
8-1589477-0
4-1589473-2
4-1589473-3
4-1589473-4
4-1589473-5
4-1589473-6
4-1589473-7
4-1589473-8
4-1589473-9
5-1589473-0
5-1589473-1
0-1589788-9
5-1589473-2
5-1589473-3
5-1589473-4
5-1589473-5
4-1589788-2
5-1589473-6
5-1589473-7
5-1589473-8
5-1589473-9
6-1589473-0
6-1589473-1
6-1589473-2
4-1589475-1
3-1589788-9
6-1589473-3
2-1589475-8
5-1589788-9
6-1589473-4
6-1589473-5
6-1589473-6
6-1589473-7
6-1589473-8
6-1589788-5
6-1589473-9
7-1589473-0
0-1589777-6
8-1589476-1
8-1589476-2
1-1589777-9
8-1589476-3
8-1589476-4
1-1589777-4
1-1589777-2
4-1589777-0
1-1589777-0
8-1589476-5
8-1589476-6
8-1589476-7
4-1589777-4
8-1589476-8
8-1589477-1
8-1589476-9
9-1589476-0
9-1589476-1
9-1589476-2
9-1589476-3
9-1589476-4
9-1589476-5
9-1589476-6
9-1589476-7
7-1589473-3
5-1589788-5
4-1589475-4
7-1589473-4
1-1589788-4
4-1589788-5
7-1589473-5
7-1589473-6
7-1589473-7
7-1589473-8
7-1589473-9
172
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
STM025PC2DC006Q
STM025PC2DC008N
STM025PC2DC010N
7-1589788-8
8-1589473-0
8-1589473-1
STM025PC4DX012M
STM025PC4DX012N
STM025SC0DC036N
2-1589474-4
2-1589474-5
3-1589777-0
STM037PC2DC012Q
STM037PC2DC015N
STM037PC2DC015Q
3-1589474-5
3-1589474-6
3-1589474-7
STM037SC2DC036N
STM037SC2DC060Q
STM037SC2DM010N
3-1589477-7
3-1589477-8
1-1589777-6
STM025PC2DC010Q
STM025PC2DC012
STM025PC2DC012N
STM025PC2DC015N
STM025PC2DC016N
STM025PC2DC018N
STM025PC2DC020N
STM025PC2DC020Q
STM025PC2DC024N
6-1589788-0
8-1589473-2
8-1589473-3
8-1589473-4
8-1589473-5
8-1589473-6
8-1589473-7
8-1589473-8
8-1589473-9
STM025SC0DM036N
STM025SC2DC003
STM025SC2DC004
STM025SC2DC006N
STM025SC2DC008N
STM025SC2DC012HN
STM025SC2DC012N
STM025SC2DC016N
STM025SC2DC018N
2-1589777-6
9-1589476-8
9-1589476-9
0-1589477-1
0-1589477-2
0-1589477-3
0-1589477-4
0-1589477-5
0-1589477-6
STM037PC2DC018
STM037PC2DC018N
STM037PC2DC020N
STM037PC2DC020Q
STM037PC2DC024
STM037PC2DC024N
STM037PC2DC024Q
STM037PC2DC030N
STM037PC2DC036
4-1589475-0
3-1589474-9
4-1589475-2
4-1589474-0
4-1589474-1
4-1589474-2
5-1589475-2
4-1589474-3
4-1589474-4
STM037SC2DM024N
STM037SC2DM036Q
STM037SC2DT008N
STM037SC2DT012N
STM037SC2DT020Q
STM037SC2DT030N
STM037SC2DTC20Q
STM037SC2DX006N
STM037SC2DX010N
3-1589477-9
8-1589477-6
9-1589477-5
8-1589477-8
2-1589777-3
4-1589477-0
2-1589777-4
4-1589477-1
4-1589477-2
STM025PC2DC024Q
STM025PC2DC030N
STM025PC2DC036M
9-1589473-0
9-1589473-1
9-1589473-2
STM025SC2DC020N
STM025SC2DC024N
STM025SC2DC036N
0-1589477-7
0-1589477-8
0-1589477-9
STM037PC2DC036N
STM037PC2DC036Q
STM037PC2DC048N
4-1589474-5
4-1589474-6
4-1589474-7
STM037SC2DX012N
STM037SC2GX006N
STM051PC0DC012N
4-1589477-3
4-1589477-4
6-1589474-5
STM025PC2DC036N
STM025PC2DC048N
STM025PC2DC060N
STM025PC2DC060Q
STM025PC2DC072N
STM025PC2DC084N
STM025PC2DC120N
STM025PC2DC180N
STM025PC2DCC10Q
STM025PC2DCC40N
STM025PC2DCC46N
STM025PC2DCC50N
STM025PC2DCC60N
STM025PC2DM006Q
STM025PC2DM012N
STM025PC2DM012Q
STM025PC2DM018N
STM025PC2DM020N
STM025PC2DM024N
STM025PC2DM036N
STM025PC2DM072Q
STM025PC2DT006N
STM025PC2DT012M
STM025PC2DT012N
STM025PC2DT024N
STM025PC2DT030N
STM025PC2DT036Q
STM025PC2DT048Q
STM025PC2DT084N
STM025PC2DX005
STM025PC2DX006N
STM025PC2DX006Q
STM025PC2DX010N
STM025PC2DX012N
STM025PC2DX018N
STM025PC2DX048N
STM025PC2DX072N
STM025PC2DY004
STM025PC2DY006
STM025PC2DY006N
STM025PC3DM024Q
STM025PC3DX030N
9-1589473-3
9-1589473-4
9-1589473-5
9-1589473-6
9-1589473-7
7-1589475-9
STM025SC2DC040N
STM025SC2DC048HN
STM025SC2DC048N
STM025SC2DC060HN
STM025SC2DC060Q
STM025SC2DC084N
STM025SC2DC180N
STM025SC2DCC46Q
STM025SC2DCC60N
STM025SC2DM010N
STM025SC2DM012HN
STM025SC2DM024N
STM025SC2DM036N
STM025SC2DT012HN
STM025SC2DT012N
STM025SC2DT030N
STM025SC2DX005HN
STM025SC2DX006N
STM025SC2DX010N
STM025SC2DX012N
STM025SC2DX018N
STM025SC2DY018N
STM025SC3DC012N
STM025SC3DMC20DQ
STM025SC3DX030N
STM025SC4DX030N
STM037PC0DC009N
STM037PC0DC009Q
STM037PC0DC036N
STM037PC0DM024N
STM037PC0DM036N
STM037PC0DM060N
STM037PC0DXC10N
STM037PC2DC001N
STM037PC2DC003N
STM037PC2DC005N
STM037PC2DC006M
STM037PC2DC006N
STM037PC2DC010Q
STM037PC2DC012
STM037PC2DC012M
STM037PC2DC012N
1-1589477-0
1-1589477-1
1-1589477-2
1-1589477-3
1-1589477-4
9-1589477-8
STM037PC2DC060Q
STM037PC2DC072N
STM037PC2DCC20Q
STM037PC2DCC50N
STM037PC2DCC50Q
STM037PC2DCM01Q
STM037PC2DM012N
STM037PC2DM018N
STM037PC2DM020N
STM037PC2DM024M
STM037PC2DM024N
STM037PC2DM036
STM037PC2DM036Q
STM037PC2DT006N
STM037PC2DT012M
STM037PC2DT012N
STM037PC2DT030N
STM037PC2DT036N
STM037PC2DT036Q
STM037PC2DTC20Q
STM037PC2DX006N
STM037PC2DX010N
STM037PC2DX012N
STM037PC2DX024N
STM037PC2GX006N
STM037PC3DC012N
STM037PC3DM024Q
STM037SC0DC036N
STM037SC0DM036N
STM037SC0DM060N
STM037SC0DXC10N
STM037SC2DC006N
STM037SC2DC006Q
STM037SC2DC012HN
STM037SC2DC012N
STM037SC2DC012Q
STM037SC2DC015N
STM037SC2DC015Q
STM037SC2DC018HN
STM037SC2DC018N
STM037SC2DC020Q
STM037SC2DC024N
4-1589474-8
4-1589474-9
5-1589474-0
5-1589474-1
8-1589788-8
5-1589474-2
STM051PC0DC036N
STM051PC0DC048N
STM051PC0DM036N
STM051PC0DM060N
STM051PC0DXC10N
STM051PC1DXC20
STM051PC2DC003N
STM051PC2DC006
STM051PC2DC006N
STM051PC2DC012N
STM051PC2DC012Q
STM051PC2DC015N
STM051PC2DC015Q
STM051PC2DC016N
STM051PC2DC018
STM051PC2DC018N
STM051PC2DC018Q
STM051PC2DC024
STM051PC2DC024N
STM051PC2DC030N
STM051PC2DC036N
STM051PC2DC036Q
STM051PC2DC060N
STM051PC2DC060Q
STM051PC2DCC20N
STM051PC2DCC30N
STM051PC2DCC50N
STM051PC2DCC50Q
STM051PC2DM018N
STM051PC2DM024N
STM051PC2DMM01N
STM051PC2DT012N
STM051PC2DT018N
STM051PC2DT030N
STM051PC2DT036N
STM051PC2DT036Q
STM051PC2DT072N
STM051PC2DX012N
STM051PC2DX012Q
STM051PC2DX015N
STM051PC2DX018
STM051PC2DX018N
5-1589788-7
6-1589474-6
1-1589788-9
2-1589788-2
6-1589474-7
6-1589474-8
9-1589473-8
9-1589473-9
1-1589788-0
0-1589474-1
8-1589788-7
0-1589474-2
0-1589474-3
0-1589474-4
0-1589788-7
0-1589474-5
0-1589474-6
4-1589788-3
0-1589474-7
0-1589474-8
1-1589788-6
3-1589475-4
4-1589475-6
0-1589474-9
4-1589788-9
1-1589474-0
1-1589474-1
1-1589474-2
6-1589788-4
1-1589474-3
1-1589474-4
1-1589474-5
1-1589474-6
1-1589474-7
1-1589474-8
1-1589474-9
6-1589788-6
2-1589474-0
2-1589474-1
2-1589474-2
6-1589475-9
9-1589475-1
1-1589477-5
4-1589777-8
1-1589477-6
1-1589777-5
1-1589777-3
4-1589777-1
1-1589777-1
1-1589477-7
8-1589477-7
1-1589477-8
1-1589477-9
2-1589477-0
2-1589477-1
2-1589477-2
2-1589477-3
2-1589477-4
2-1589477-5
2-1589477-6
0-1589777-4
2-1589477-7
2-1589474-6
8-1589788-5
5-1589788-6
1-1589788-5
1-1589788-8
2-1589788-1
2-1589474-7
6-1589788-7
2-1589474-8
2-1589474-9
3-1589474-0
3-1589474-1
6-1589788-1
3-1589474-2
3-1589474-3
3-1589474-4
5-1589475-1
5-1589474-3
4-1589788-4
5-1589474-4
5-1589474-5
7-1589788-7
4-1589475-5
3-1589475-5
4-1589475-7
5-1589474-7
5-1589474-8
6-1589788-8
8-1589788-0
5-1589788-0
5-1589474-9
6-1589474-0
6-1589474-1
6-1589474-2
6-1589474-3
6-1589474-4
7-1589475-0
3-1589777-1
3-1589777-7
2-1589777-2
2-1589477-8
2-1589477-9
3-1589477-0
0-1589777-9
3-1589477-1
9-1589477-0
3-1589477-2
8-1589477-9
3-1589477-3
3-1589477-4
3-1589477-5
3-1589477-6
DUALOBE Rectangular
Connectors
Nanonics
Part Number
5
6-1589474-9
7-1589474-0
7-1589474-1
7-1589474-2
7-1589474-3
7-1589474-4
2-1589788-0
7-1589474-5
7-1589474-6
7-1589474-7
7-1589474-8
6-1589475-6
7-1589474-9
8-1589474-0
8-1589474-1
8-1589474-2
8-1589474-3
8-1589474-4
8-1589474-5
9-1589475-7
3-1589788-5
3-1589788-6
8-1589474-6
7-1589788-0
8-1589474-7
8-1589474-9
7-1589788-2
9-1589474-0
9-1589474-1
8-1589788-1
9-1589474-2
9-1589474-3
9-1589474-4
9-1589474-5
9-1589474-6
9-1589474-7
173
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
STM051PC2DY015N
STM051PC2GX006N
STM051PC2GX012N
9-1589474-8
3-1589475-6
3-1589788-1
STM065PC2DM024N
STM065PC2DM036N
STM065PC2DMC46N
5-1589475-0
6-1589788-2
4-1589788-0
STM051PC2GXM01N
STM051SC0DC036N
STM051SC0DXC10N
STM051SC1DXC20
STM051SC2DC003N
STM051SC2DC006
STM051SC2DC006N
STM051SC2DC008Q
STM051SC2DC012N
9-1589474-9
3-1589777-2
4-1589477-5
4-1589477-6
4-1589477-7
4-1589477-8
4-1589477-9
3-1589777-5
5-1589477-0
STM065PC2DT012N
STM065PC2DT018N
STM065PC2DT030N
STM065PC2DTC10N
STM065PC2DX006N
STM065PC2DX018N
STM065PC2DX036N
STM065PC2DY012N
STM065PC2DY012Q
STM051SC2DC015HN
STM051SC2DC015N
STM051SC2DC016N
5-1589477-1
5-1589477-2
5-1589477-3
STM051SC2DC018HN
STM051SC2DC018N
STM051SC2DC018Q
STM051SC2DC036N
STM051SC2DC036Q
STM051SC2DC060N
STM051SC2DC060Q
STM051SC2DM012N
STM051SC2DM024N
STM051SC2DMM01N
STM051SC2DT012N
STM051SC2DT018N
STM051SC2DT030N
STM051SC2DX012N
STM051SC2DX015N
STM065PC0DC036N
STM065PC0DM036N
STM065PC0DM060N
STM065PC0DMC30Q
STM065PC0DMM01Q
STM065PC2DC003N
STM065PC2DC006
STM065PC2DC006N
STM065PC2DC008Q
STM065PC2DC012N
STM065PC2DC012Q
STM065PC2DC016M
STM065PC2DC016N
STM065PC2DC018M
STM065PC2DC018N
STM065PC2DC018Q
STM065PC2DC020N
STM065PC2DC024N
STM065PC2DC024Q
STM065PC2DC030N
STM065PC2DC036
STM065PC2DC036N
STM065PC2DC072N
STM065PC2DCC50N
STM065PC2DCM01N
STM065PC2DCM01Q
STM065PC2DM018N
5-1589477-4
5-1589477-5
5-1589477-6
5-1589477-7
0-1589777-7
5-1589477-8
5-1589477-9
6-1589477-0
4-1589777-2
6-1589477-1
0-1589777-3
4-1589777-5
6-1589477-3
6-1589477-4
6-1589477-5
5-1589788-8
4-1589788-6
2-1589788-3
9-1589475-8
4-1589788-8
0-1589475-1
0-1589475-2
0-1589475-3
0-1589475-4
0-1589475-5
0-1589475-6
0-1589475-7
0-1589475-8
0-1589475-9
1-1589475-0
1-1589475-1
4-1589475-3
1-1589475-2
1-1589475-3
1-1589475-4
5-1589475-6
1-1589475-5
1-1589475-6
4-1589475-9
7-1589475-7
8-1589475-9
1-1589475-7
Nanonics
Part Number
Tyco
Part Number
Jumper Assemblies
1-1589735-4
2-1589672-0
2-1589672-1
JSM025PP2DXC17N
JSM025PP2GX003N
JSM025PP2GX024N
JSM025PP4DXC20N
JSM025PR2DC006N
JSM025PR2DC1.5N
JSM025PR2GX002N
JSM025RR2DC006N
JSM037PD2GXC02N
2-1589672-2
2-1589672-3
2-1589672-4
2-1589672-5
2-1589672-6
5-1589699-5
2-1589672-7
0-1589803-1
0-1589797-2
7-1589671-6
0-1589736-2
7-1589671-7
JSM037PD2GXC05N
JSM037PD2GXC10N
JSM037PP2DCC06Q
0-1589797-1
3-1589672-3
3-1589672-4
7-1589671-8
7-1589671-9
8-1589671-0
8-1589671-1
8-1589671-2
8-1589671-3
8-1589671-4
8-1589671-5
8-1589671-6
8-1589671-7
8-1589671-8
8-1589671-9
0-1589736-4
9-1589671-0
1-1589735-0
0-1589735-9
0-1589735-3
0-1589735-5
0-1589735-4
9-1589671-1
9-1589671-5
9-1589671-6
1-1589735-2
9-1589671-7
0-1589735-6
9-1589671-8
9-1589671-9
0-1589672-6
0-1589797-3
1-1589735-1
1-1589735-3
0-1589799-3
0-1589799-2
0-1589799-1
0-1589672-7
0-1589672-8
0-1589672-9
1-1589672-0
1-1589672-1
4-1589699-9
1-1589672-2
0-1589736-1
JSM037PP2DCC08Q
JSM037PP2DX018N
JSM037PP2GX072N
JSM037PR2DTC03N
JSM051PD2GXC10N
JSM051PD2GXC12
JSM051PD2GXC12N
JSM051PD2GXC15N
JSM051PD2GXC17N
JSM051PD2GXC50N
JSM051PP2DCC12Q
JSM051PP2GXC12
JSM051PP2GXC12N
JSM051PP2GXC17N
JSM051PP2GXC22N
JSM051PP2GXC50N
JSM051PP2GXC75N
JSM051PP2GXC80N
JSM051PR2DC1.5N
JSM051PR2GX002N
JTL009PD2GX006N
JTL009PD2GX012N
JTL009PD2GX018N
JTL009PP2DC012N
JTL009PP2DX006N
JTL009PR2DC018N
JTL015PP2DX002N
JTL015PP2DX006N
JTL015PP2DX008M
JTL015PP2DX014N
JTL015PR0DC011N
JTL015PR2DX008
JTL025PD2DC010N
JTL025PD2DC1.25N
JTL025PP2DC001M
JTL025PP2DC001N
JTL025PP2DC036N
JTL025PP2DCC05N
JTL025PP2DCC07N
JTL025PP2DX002N
JTL025PP2DX003N
JTL025PP2DX010N
3-1589672-5
3-1589672-6
3-1589672-7
0-1589736-3
4-1589672-7
4-1589672-8
1-1589735-5
8-1589475-5
1-1589475-8
1-1589475-9
9-1589788-0
2-1589475-0
2-1589475-1
2-1589475-2
2-1589475-3
2-1589788-7
JSL009PP2DC006N
JSL009PP2DX003N
JSL009PP2DX006N
JSL009PR2DC012N
JSL009RR2DX0.5N
JSL015PD2DX002N
JSL015PP2DX001N
JSL015PP2DX006N
JSL025PP2DC012N
JSL037PD2GXC02N
0-1589735-8
7-1589671-1
0-1589735-7
7-1589671-2
7-1589671-3
4-1589699-8
0-1589735-2
7-1589671-4
0-1589735-1
7-1589671-5
STM065PC2DY024N
STM065PC2GXM01N
STM065PC3DM006N
2-1589475-4
2-1589475-5
2-1589475-6
JSL037PR2DX002N
JSL037PR2DX003N
JSL051PD2GXC10N
STM065PC3DX024N
STM065SC0DC036N
STM065SC2DC003N
STM065SC2DC006
STM065SC2DC006N
STM065SC2DC008Q
STM065SC2DC012N
STM065SC2DC012Q
STM065SC2DC015N
STM065SC2DC018
STM065SC2DC018N
STM065SC2DC018Q
STM065SC2DC024N
STM065SC2DC024Q
STM065SC2DC036
STM065SC2DC036HN
STM065SC2DC036N
STM065SC2DC036Q
STM065SC2DM024N
STM065SC2DT012N
STM065SC2DT018N
STM065SC2DT030N
2-1589475-7
3-1589777-3
6-1589477-6
6-1589477-7
6-1589477-8
3-1589777-6
JSL051PD2GXC17N
JSL051PD2GXC22N
JSL051PD2GXC30N
JSL051PD2GXC75N
JSL051PD2GXC80N
JSL051PP2DC004N
JSL051PP2GXC10N
JSL051PP2GXC15N
JSL051PP2GXC17N
JSL051PP2GXC22N
JSL051PP2GXC75N
JSL051PP2GXC80N
JSL051PR2GX002
JSM005PP2DC002N
JSM005PP2DC003N
JSM005PP2DC005N
JSM005PP2DC008
JSM005PP2DC02.5N
JSM005PP2DC072
JSM005PP2DT150N
JSM009PP2DC002N
JSM009PP2DC003N
JSM009PP2DC006N
JSM009PP2DC024N
JSM009PP2DM005Q
JSM009PR2DC002N
JSM009PR2DC006N
JSM015PD2DCC02N
JSM015PD2GXC05N
JSM015PP2DC004N
JSM015PP2DC006N
JSM015PP2GX001N
JSM015PP2GX002N
JSM015PP2GX006N
JSM015PP2GX014N
JSM015PP2GX018N
JSM015PR2DC001N
JSM015PR2DC002N
JSM015PR2DC003N
JSM015PR2DC004N
JSM015PR2DC006N
JSM015PR2DX003N
7-1589477-3
7-1589477-4
7-1589477-5
7-1589477-6
9-1589477-3
7-1589477-7
7-1589477-8
0-1589777-8
4-1589777-3
0-1589777-2
4-1589777-6
7-1589477-9
Tyco
Part Number
JSM025PP2DC006N
JSM025PP2DX004N
JSM025PP2DX008N
JSL005PP2DC002N
6-1589477-9
7-1589477-0
7-1589477-1
7-1589477-2
Nanonics
Part Number
4-1589672-9
5-1589672-0
5-1589672-1
5-1589672-2
5-1589672-3
5-1589672-4
5-1589672-5
5-1589672-6
5-1589672-7
5-1589672-8
5-1589672-9
6-1589672-0
5-1589699-6
6-1589672-1
3-1589729-8
7-1589699-3
3-1589729-9
0-1589737-3
1-1589737-7
5-1589699-8
0-1589737-1
1-1589737-6
9-1589672-5
5-1589699-0
1-1589738-3
9-1589672-6
5-1589699-9
5-1589699-7
4-1589737-3
4-1589737-2
9-1589672-8
0-1589737-5
9-1589672-9
0-1589673-1
0-1589673-2
0-1589673-3
174
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
JTL025PR0DC007N
JTL025PR2DCM31N
JTL037PP2DC012N
1-1589738-4
0-1589673-4
4-1589737-0
JTM015PP2DY011N
JTM015PP2DY022N
JTM015PR2DC002N
2-1589737-0
2-1589737-1
7-1589673-8
JTM037PP2DX006Q
JTM037PP2DX009Q
JTM037PP2DX010Q
9-1589674-7
9-1589674-8
2-1589737-9
JTM065PR2GX001N
JTM065RR2DC003
JTL037PP2DC024N
JTL037PP2DC07.5N
JTL037PP2DC08.5N
JTL037PP2DC09.5N
JTL037PP2DM006N
JTL037PP2DX002N
JTL037PP2DX003N
JTL037PP2DX006N
JTL037PP2DX012
4-1589737-1
0-1589673-5
0-1589673-6
0-1589673-7
0-1589737-7
0-1589673-8
0-1589673-9
1-1589737-5
1-1589673-0
JTM015PR2DC003Q
JTM015PR2DC012M
JTM015PR2DT001N
JTM015PR2DT002M
JTM015PR2DX001N
JTM015PR2DX003N
JTM015RR2DC012N
JTM025PD2GX002N
JTM025PP2DC001N
2-1589738-0
7-1589673-9
8-1589673-0
0-1589738-2
2-1589738-6
0-1589738-6
0-1589804-1
0-1589798-3
4-1589737-7
JTM037PP2DX016
JTM037PP2DX024N
JTM037PP2DX3.5N
JTM037PR0DC036M
JTM037PR2DC003Q
JTM037PR2DC005N
JTM037PR2DCC16Q
JTM037PR2DT001N
JTM037PR2DT002M
9-1589674-9
0-1589675-1
2-1589737-6
0-1589675-3
2-1589738-2
1-1589738-2
1-1589738-0
0-1589675-4
0-1589738-4
Surface Mount
JTL037PP2DX012N
JTL037PR2DC012N
JTL037PR2DC024N
2-1589737-7
3-1589738-0
3-1589738-1
JTM025PP2DC012N
JTM025PP2DC018N
JTM025PP2DC024N
4-1589737-6
3-1589737-3
3-1589737-5
JTM037PR2DX001
JTM037PR2DX001N
JTM037PR2DX001Q
1-1589738-1
0-1589675-5
1-1589738-6
JTL037PR2DT024N
JTL037PR2DX001
JTL051PP2DC009N
JTL051PP2DX002N
JTL051PP2DX006N
JTL051PP2DX010N
JTL051PP2DX024N
JTL051PR2DC012N
JTL051PR2DC048
JTL065PP2DC005N
JTL065PP2DC006N
JTL065PP2DC012N
JTL065PP2DCC05N
JTL065PP2DX012N
JTL065PR2DX002N
JTM009PD2DX003N
JTM009PD2DX006N
JTM009PP2DC006N
JTM009PP2DC012N
JTM009PP2DC02.5N
JTM009PP2DM004N
JTM009PP2DT002N
JTM009PP2DT004N
JTM009PP2DX006N
JTM009PR2DC003Q
JTM009PR2DCC50N
JTM009PR2DT002M
JTM009PR2DX001N
JTM015PD2DX006N
JTM015PD2GX006N
JTM015PD2GX012N
JTM015PP2DC006M
JTM015PP2DC012M
JTM015PP2DC02.5N
JTM015PP2DC05.5N
JTM015PP2DT004N
JTM015PP2DX001N
JTM015PP2DX005Q
JTM015PP2DX006N
JTM015PP2DX009N
JTM015PP2DX024N
JTM015PP2DY003N
1-1589673-1
0-1589738-9
0-1589737-4
1-1589673-4
1-1589673-5
1-1589673-6
JTM025PP2DC030N
JTM025PP2DC035N
JTM025PP2DC2.75N
JTM025PP2DM024M
JTM025PP2DX001N
JTM025PP2DX012N
JTM025PP2DX018N
JTM025PP2DX022N
JTM025PP2DX03.8M
JTM025PP2DX03.8N
JTM025PP2DX040N
JTM025PP2DY006
JTM025PP2DY006N
JTM025PP2DY020N
JTM025PP2DY024N
JTM025PR0DXC20N
JTM025PR0DXC30N
JTM025PR2DC003Q
JTM025PR2DT001N
JTM025PR2DT002M
JTM025PR2DT240N
JTM025PR2DX0.5N
JTM025PR2DX001N
JTM025PR2DX003N
JTM025PR2DX006Q
JTM025PR2DX012N
JTM025PR2DX020
JTM037PD2DC002N
JTM037PD2DC004N
JTM037PD2GX012N
JTM037PD2GX024N
JTM037PP0DM006
JTM037PP0DM006N
JTM037PP2DC018N
JTM037PP2DC024N
JTM037PP2DC036N
JTM037PP2DC041N
JTM037PP2DX001.75N
JTM037PP2DX001N
JTM037PP2DX002N
JTM037PP2DX002Q
JTM037PP2DX004N
3-1589737-7
5-1589737-0
1-1589737-8
3-1589737-2
2-1589674-8
2-1589674-9
JTM037PR2DX006Q
JTM037PR2GX002
JTM037PR2GX003N
JTM051PD2DC002N
JTM051PD2DT004N
JTM051PD2DXC10N
JTM051PP2DC001N
JTM051PP2DC004N
JTM051PP2DC2.5N
JTM051PP2DT005
JTM051PP2DX001N
JTM051PP2DX004N
JTM051PP2DX009Q
JTM051PP2DX012N
JTM051PP2DX036N
JTM051PP2DX040N
JTM051PP2DX2.5N
JTM051PP2DX4.5N
JTM051PR0DC036N
JTM051PR2DC002N
JTM051PR2DC003Q
JTM051PR2DC005
JTM051PR2DC006Q
JTM051PR2DC018N
JTM051PR2DT001N
JTM051PR2DX002N
JTM051PR2GX002
JTM051PR2GX006Q
JTM051RR2DC003
JTM065PD2GX022N
JTM065PP2DC004N
JTM065PP2DMC10Q
JTM065PP2DX002N
JTM065PP2DX004N
JTM065PP2DX006N
JTM065PP2DX007N
JTM065PR2DC001N
JTM065PR2DC003
JTM065PR2DC003N
JTM065PR2DX001N
JTM065PR2DX004N
JTM065PR2DX004Q
1-1589738-7
0-1589675-6
0-1589675-7
0-1589798-4
6-1589675-1
6-1589675-2
1-1589673-7
1-1589738-5
1-1589673-8
2-1589737-2
2-1589737-5
2-1589673-3
2-1589673-4
0-1589737-8
0-1589738-8
3-1589673-1
3-1589673-2
4-1589737-9
4-1589737-8
3-1589673-3
1-1589737-0
3-1589673-4
3-1589673-5
3-1589673-6
1-1589738-9
3-1589673-7
0-1589738-3
2-1589738-5
0-1589798-1
0-1589798-2
6-1589673-4
6-1589673-5
6-1589673-6
6-1589673-7
4-1589737-4
6-1589673-8
6-1589673-9
2-1589737-8
7-1589673-0
7-1589673-1
7-1589673-2
1-1589737-9
3-1589674-0
3-1589674-1
3-1589674-2
3-1589674-3
2-1589737-4
0-1589737-6
3-1589674-4
3-1589674-5
2-1589737-3
3-1589674-6
3-1589674-7
2-1589738-1
3-1589674-8
0-1589738-1
3-1589674-9
4-1589674-0
2-1589738-7
0-1589738-5
4-1589674-1
4-1589674-2
4-1589674-3
8-1589674-8
8-1589674-9
9-1589674-0
9-1589674-1
9-1589674-2
3-1589737-9
3-1589737-4
3-1589737-6
3-1589737-8
5-1589737-1
9-1589674-3
9-1589674-4
0-1589737-9
3-1589737-0
9-1589674-6
4-1589737-5
6-1589675-3
7-1589699-4
0-1589737-2
6-1589675-4
6-1589675-5
5-1589737-2
6-1589675-6
1-1589737-3
1-1589737-4
6-1589675-7
6-1589675-8
2-1589738-9
6-1589675-9
2-1589738-3
7-1589675-0
2-1589738-4
0-1589738-7
7-1589675-1
7-1589675-2
7-1589675-3
7-1589675-4
7-1589675-5
7-1589699-1
1-1589737-2
3-1589737-1
0-1589676-1
0-1589676-2
0-1589676-3
0-1589676-4
0-1589676-5
0-1589676-6
0-1589676-7
2-1589738-8
0-1589676-8
1-1589738-8
SSL005L2AN
SSL005L2HN
SSL009B2H
SSL009L2AN
SSL009L2AQ
SSL009L2HN
SSL009L42HN
SSL009L43KN
SSL009L4CN
SSL009L4KN
SSL015L2AN
SSL015L2AQ
SSL015L2CN
SSL015L2H
SSL015L2HN
SSL015L4N
SSL015L4PQ
SSL025B2
SSL025L23N
SSL025L2AN
SSL025L2HN
SSL025L42
SSL037B2H
SSL037B2N
SSL037L2HN
SSL037L43KN
SSL051B2
SSL051L2CN
SSL051L2HN
SSM005L2HN
SSM005L2N
SSM005L82HN
SSM005L84HN
SSM005L85HN
SSM009B2H
SSM009B2N
SSM009L2
SSM009L2AN
SSM009L2AQ
SSM009L2HN
SSM009L2N
SSM009L2SN
SSM009L42KN
SSM009L44KN
SSM009L44N
SSM009L4AQ
SSM009L4KN
SSM009L85HN
SSM015B2N
SSM015B45H
SSM015H5
SSM015L2AN
SSM015L2AQ
DUALOBE Rectangular
Connectors
Nanonics
Part Number
Tyco
Part Number
0-1589676-9
1-1589676-0
0-1589462-5
0-1589462-6
0-1589700-2
0-1589462-7
0-1589462-8
0-1589462-9
0-1589463-1
0-1589464-1
0-1589463-2
0-1589463-3
1-1589462-0
5
1-1589462-1
1-1589462-2
1-1589462-3
1-1589462-4
0-1589463-4
2-1589463-6
0-1589460-1
1-1589462-5
1-1589462-6
1-1589462-7
0-1589463-5
0-1589700-3
0-1589460-4
1-1589462-8
0-1589464-2
0-1589460-5
1-1589462-9
2-1589462-0
2-1589462-1
4-1589462-8
0-1589467-3
0-1589467-4
0-1589468-1
0-1589700-4
0-1589460-7
2-1589462-2
2-1589462-3
2-1589462-4
2-1589462-5
2-1589462-6
2-1589462-7
0-1589463-6
0-1589463-7
0-1589463-8
2-1589463-7
0-1589463-9
0-1589468-2
1-1589460-3
0-1589466-1
0-1589819-1
2-1589462-8
2-1589462-9
175
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
SSM015L2CN
SSM015L2HN
SSM015L2N
3-1589462-0
3-1589462-1
4-1589462-7
STL009L44KN
STL009L4KN
STL009L4N
9-1589484-3
0-1589484-3
9-1589484-2
STL065L42KN
STL065L44N
STL065L4CQ
2-1589484-0
2-1589484-1
2-1589484-2
SSM015L2SN
SSM015L44KN
SSM015L4KN
SSM015L4PQ
SSM015L82HN
SSM015L84HN
SSM015L85HN
SSM025B2H
SSM025B44N
3-1589462-2
1-1589463-0
1-1589463-1
1-1589463-2
0-1589467-2
0-1589467-5
0-1589468-3
0-1589700-5
0-1589465-1
STL015B2N
STL015B44N
STL015L23N
STL015L2AN
STL015L2AQ
STL015L2CN
STL015L2HN
STL015L2HQ
STL015L2N
0-1589490-1
0-1589485-1
1-1589483-0
1-1589483-1
1-1589483-2
1-1589483-3
1-1589483-4
8-1589483-7
8-1589483-6
STL065L4KN
STL065T5
STM009B2N
STM009B42N
STM009B44Q
STM009H2N
STM009L23N
STM009L2AN
STM009L2AQ
2-1589484-3
0-1589814-1
1-1589490-2
0-1589485-3
1-1589485-5
0-1589902-4
2-1589483-9
9-1589483-9
8-1589483-2
SSM025B45K
SSM025L23N
SSM025L2AN
0-1589466-2
3-1589462-3
3-1589462-4
STL015L423N
STL015L42KN
STL015L44KN
0-1589484-4
0-1589484-5
0-1589484-6
STM009L2CN
STM009L2HN
STM009L2N
7-1589483-8
3-1589483-0
3-1589483-1
SSM025L2AQ
SSM025L2GQ
SSM025L2HN
SSM025L2N
SSM025L2SN
SSM025L42HN
SSM025L44HN
SSM025L44KN
SSM025L44SN
SSM025L45KN
SSM025L4HN
SSM025L4KN
SSM025L4PQ
SSM025L4SN
SSM037B2
SSM037B2H
SSM037B2N
SSM037L2AQ
SSM037L2HN
SSM037L2IQ
SSM037L42IQ
SSM037L42KN
SSM037L4KN
SSM037L82AQ
SSM037L84KN
SSM037L85PQ
SSM051B2H
SSM051L2AQ
SSM051L2GQ
SSM051L2HN
SSM051L2IQ
SSM051L42KN
SSM051L44KN
SSM051L4KN
STL009L23N
STL009L2AQ
STL009L2H
STL009L2HN
STL009L423N
STL009L42CN
STL009L42HN
STL009L42KN
3-1589462-5
4-1589462-9
3-1589462-6
5-1589462-2
3-1589462-8
2-1589463-4
STL015L44N
STL015L4CQ
STL015L4HN
STL015L4KN
STL025B2
STL025B2N
STL025B44M
STL025L2AN
STL025L2AQ
STL025L2CN
STL025L2HN
STL025L2HQ
STL025L2JN
STL025L42KN
STL025L44KN
STL025L44N
STL025L4HN
STL025L4KN
STL025L4PQ
STL037B2M
STL037B42
STL037L23N
STL037L2AN
STL037L2AQ
STL037L2HN
STL037L2JN
STL037L2KN
STL037L2N
STL037L42KN
STL037L44KN
STL037L4HN
STL051L2AN
STL051L2AQ
STL051L2CN
STL051L2HN
STL051L42KN
STL051L4HN
STL051L4KN
STL051L4PQ
STL065L2AQ
STL065L2HN
STL065L2N
0-1589484-7
0-1589484-8
0-1589484-9
1-1589484-0
0-1589490-2
1-1589490-1
STM009L2SN
STM009L42CN
STM009L42HN
STM009L42KN
STM009L44HN
STM009L44PQ
STM009L44Q
STM009L4AQ
STM009L4KN
STM009L4PQ
STM009L84HN
STM009L8HN
STM015B2N
STM015B42N
STM015H2N
STM015H5Q
STM015L23N
STM015L2AQ
STM015L2CN
STM015L2HN
STM015L2HQ
STM015L2LQ
STM015L2N
STM015L2SN
STM015L42KN
STM015L44AQ
STM015L44HN
STM015L44KN
STM015L44Q
STM015L4HN
STM015L4KN
STM015L4PQ
STM015L4SN
STM015L82CN
STM015L82HN
STM015L82IQ
STM015L82LQ
STM015L84AQ
STM015L84CN
STM015L84HN
STM015L84IQ
STM015L84KN
3-1589483-2
8-1589484-1
2-1589484-4
2-1589484-5
2-1589484-6
2-1589484-7
1-1589463-3
1-1589463-4
2-1589463-8
0-1589464-3
1-1589463-5
1-1589463-6
1-1589463-7
1-1589463-8
0-1589460-9
0-1589700-6
1-1589460-2
3-1589462-9
4-1589462-1
5-1589462-1
2-1589463-5
1-1589463-9
2-1589463-0
0-1589467-6
0-1589467-1
0-1589468-4
0-1589700-1
4-1589462-3
5-1589462-0
4-1589462-4
4-1589462-5
2-1589463-1
2-1589463-2
2-1589463-3
8-1589483-3
9-1589483-2
0-1589483-8
0-1589483-9
0-1589484-1
9-1589484-0
8-1589484-4
0-1589484-2
2-1589485-3
1-1589483-5
1-1589483-6
8-1589483-9
1-1589483-7
8-1589483-8
1-1589483-8
1-1589484-1
9-1589484-4
1-1589484-2
1-1589484-3
1-1589484-4
8-1589484-6
1-1589490-3
0-1589485-2
1-1589483-9
2-1589483-0
2-1589483-1
2-1589483-2
2-1589483-3
9-1589483-7
8-1589483-5
8-1589484-2
1-1589484-5
1-1589484-6
9-1589483-4
2-1589483-4
2-1589483-5
2-1589483-6
1-1589484-7
1-1589484-8
1-1589484-9
8-1589484-7
9-1589483-0
2-1589483-7
2-1589483-8
2-1589484-8
2-1589484-9
3-1589484-0
3-1589484-1
2-1589486-4
1-1589486-7
0-1589490-3
0-1589485-4
0-1589902-3
0-1589813-1
3-1589483-4
3-1589483-5
7-1589483-7
3-1589483-6
3-1589483-7
3-1589483-8
3-1589483-9
4-1589483-0
3-1589484-2
3-1589484-3
3-1589484-4
3-1589484-5
3-1589484-6
3-1589484-7
3-1589484-8
3-1589484-9
8-1589484-8
3-1589486-0
0-1589486-1
1-1589486-3
2-1589486-1
3-1589486-5
3-1589486-2
2-1589486-5
3-1589486-4
0-1589486-2
Nanonics
Part Number
STM015L8HN
STM025B2N
STM025B42N
STM025B44
STM025B44N
STM025B44Q
STM025H2N
STM025H44N
STM025H5N
STM025H5Q
STM025L2AN
STM025L2AQ
STM025L2CN
STM025L2HN
STM025L2HQ
STM025L2IQ
STM025L2JN
STM025L2N
STM025L42CN
STM025L42KN
STM025L44HM
STM025L44HN
STM025L44KN
STM025L44N
STM025L44PQ
STM025L44Q
STM025L4CN
STM025L4KN
STM025L4LQ
STM025L4PN
STM025L4PQ
STM025L4SN
STM025L82CN
STM025L82HN
STM025L84CN
STM025L84KN
STM025L8HN
STM037B2H
STM037B2M
STM037B2N
STM037B4
STM037B42N
STM037B42Q
STM037B4N
STM037H2N
STM037L23N
STM037L2AN
STM037L2AQ
STM037L2CN
STM037L2HN
STM037L2IQ
STM037L2KN
STM037L2N
STM037L2SN
STM037L2TQ
STM037L42AQ
STM037L42HN
Tyco
Part Number
3-1589486-7
0-1589490-4
0-1589485-5
0-1589485-6
1-1589485-9
1-1589485-7
0-1589902-2
0-1589817-1
0-1589813-2
0-1589813-3
4-1589483-2
4-1589483-3
4-1589483-4
4-1589483-5
4-1589483-6
4-1589483-7
4-1589483-8
4-1589483-9
7-1589484-9
4-1589484-0
4-1589484-1
4-1589484-2
4-1589484-3
4-1589484-4
4-1589484-5
4-1589484-6
7-1589484-6
4-1589484-7
4-1589484-8
4-1589484-9
5-1589484-0
5-1589484-1
2-1589486-9
0-1589486-3
3-1589486-3
0-1589486-4
0-1589486-9
0-1589480-1
1-1589490-4
0-1589490-5
2-1589485-0
0-1589485-8
1-1589485-8
0-1589485-9
0-1589902-1
5-1589483-2
5-1589483-3
5-1589483-4
8-1589483-1
5-1589483-5
9-1589483-1
9-1589483-8
8-1589483-4
5-1589483-7
9-1589483-5
9-1589484-7
5-1589484-2
176
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
Tyco
Part Number
STM037L42K
STM037L42KN
STM037L42PQ
5-1589484-3
5-1589484-4
8-1589484-3
STM037L44DQ
STM037L44KN
STM037L44N
STM037L44PQ
STM037L44Q
STM037L44SN
STM037L4CN
STM037L4HN
STM037L4KN
8-1589484-0
5-1589484-5
8-1589484-9
5-1589484-6
5-1589484-7
5-1589484-8
7-1589484-7
5-1589484-9
6-1589484-0
STM037L4PQ
STM037L4SN
STM037L82AQ
6-1589484-1
9-1589484-6
0-1589486-5
STM037L82HN
STM037L82PQ
STM037L84AQ
STM037L84HN
STM037L84N
STM037L84PQ
STM037L84SN
STM037L8HN
STM051B2H
STM051B2N
STM051B2Q
STM051B42N
STM051B4N
STM051H5
STM051L23N
STM051L2AQ
STM051L2CN
STM051L2HN
STM051L2HQ
STM051L2IQ
STM051L2JN
STM051L2Q
STM051L2SN
STM051L2TQ
STM051L42HN
STM051L42KN
STM051L42N
STM051L44HN
STM051L44KN
STM051L44PQ
STM051L44Q
STM051L4CN
STM051L4HN
STM051L4KN
STM051L4PQ
STM051L4SN
STM051L82AQ
STM051L82HN
STM051L82IQ
STM051L82LQ
STM051L84HN
STM051L8HN
1-1589486-2
1-1589486-1
1-1589486-6
2-1589486-7
1-1589486-9
3-1589486-6
3-1589486-8
4-1589486-0
0-1589480-2
0-1589490-6
0-1589490-8
1-1589485-0
2-1589485-2
0-1589813-4
5-1589483-9
6-1589483-0
6-1589483-2
6-1589483-3
6-1589483-4
7-1589483-9
6-1589483-5
6-1589483-6
6-1589483-8
9-1589483-6
6-1589484-3
6-1589484-4
6-1589484-5
6-1589484-6
6-1589484-7
6-1589484-8
6-1589484-9
7-1589484-8
9-1589484-1
7-1589484-0
7-1589484-1
9-1589484-5
3-1589486-9
2-1589486-0
1-1589486-5
2-1589486-2
2-1589486-8
1-1589486-0
Nanonics
Part Number
STM065B2H
STM065B2N
STM065B2Q
STM065B42N
STM065B42Q
STM065B44
STM065B44N
STM065B44Q
STM065B4Q
STM065L23N
STM065L2AQ
STM065L2CN
STM065L2HN
STM065L2IQ
STM065L2JN
STM065L2KN
STM065L42HN
STM065L42KN
STM065L42N
STM065L4KN
STM065L82AQ
STM065L82HN
STM065L82IQ
STM065L82LQ
STM065L84HN
STM065L84IQ
STM065L84N
STM065L8HN
Tyco
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
0-1589480-3
1-1589490-0
0-1589490-9
1-1589485-1
2-1589485-1
1-1589485-2
1-1589485-6
1-1589485-3
1-1589485-4
7-1589483-0
7-1589483-1
7-1589483-2
7-1589483-3
8-1589483-0
7-1589483-4
SSM009M5LQ
SSM009M6AQ
SSM009M6CN
0-1589470-7
1-1589469-8
1-1589469-9
STL037M5Q
STL037M6HN
STL037M6SN
1-1589488-4
6-1589487-6
1-1589487-5
SSM009M6DQ
SSM009M6HN
SSM009M6SN
SSM015C5N
SSM015C6N
SSM015M5CN
SSM015M5LQ
SSM015M6HN
SSM015M6SN
2-1589469-0
2-1589469-2
2-1589469-4
0-1589461-2
0-1589471-4
0-1589470-8
0-1589470-9
2-1589469-5
2-1589469-6
STL051M5CN
STL051M5KN
STL051M6A
STL051M6AN
STL051M6HN
STL051M6IN
STL051M6SN
STL065M5KN
STL065M6HN
1-1589488-5
5-1589488-4
1-1589487-6
8-1589487-0
6-1589487-7
8-1589487-1
1-1589487-7
5-1589488-3
8-1589487-2
SSM025C6Q
SSM025M5CN
SSM025M5HN
0-1589471-2
1-1589470-0
1-1589470-1
STL065M6SN
STM009C5N
STM009C5Q
1-1589487-8
1-1589482-3
1-1589482-5
7-1589483-5
7-1589484-2
SSM025M5LQ
SSM025M5N
SSM025M6AQ
SSM025M6DQ
SSM025M6HN
SSM025M6SN
SSM037C5Q
SSM037C6N
SSM037M6HN
SSM037M6HQ
SSM037M6SN
SSM051C5N
SSM051M5CN
SSM051M6N
SSM051M6SN
STL009M5CN
STL009M5KN
STL009M5L
STL009M6CN
STL009M6HN
STL015C5N
STL015M5CN
STL015M5KN
STL015M5SN
STL015M6CN
STL015M6HN
STL015M6KN
STL015M6SN
STL025C5N
STL025C6N
STL025M5
STL025M5CN
STL025M5KN
STL025M6
STL025M6D
STL025M6DQ
STL025M6HN
STL025M6KN
STL025M6N
STL025M6SN
STL037M5CN
STL037M5LQ
1-1589470-2
1-1589470-4
4-1589469-6
2-1589469-7
2-1589469-8
3-1589469-0
STM009C6N
STM009M5AQ
STM009M5CN
STM009M5DQ
STM009M5HN
STM009M5LQ
STM009M5PQ
STM009M5Q
STM009M6AN
STM009M6AQ
STM009M6CN
STM009M6DQ
STM009M6HN
STM009M6IQ
STM009M6SN
STM015C5N
STM015C6N
STM015M5AN
STM015M5AQ
STM015M5CN
STM015M5HN
STM015M5KN
STM015M5LN
STM015M5LQ
STM015M5PQ
STM015M5SN
STM015M6AN
STM015M6CN
STM015M6DQ
STM015M6HN
STM015M6IQ
STM015M6N
STM015M6S
STM015M6SN
STM015M9AN
STM015M9HN
STM025C5N
STM025C5Q
STM025C6N
STM025M5AQ
STM025M5CN
STM025M5HN
STM025M5LQ
0-1589481-2
5-1589488-8
1-1589488-6
1-1589488-7
1-1589488-8
1-1589488-9
7-1589484-3
7-1589484-4
7-1589484-5
0-1589486-6
0-1589486-7
1-1589486-4
2-1589486-3
2-1589486-6
0-1589486-8
3-1589486-1
1-1589486-8
Through-Hole
SSL005M6SN
SSL009M5CN
SSL009M6A
SSL009M6CN
SSL009M6D
SSL009M6H
SSL009M6SN
SSL015M5KN
SSL015M6A
SSL015M6CN
SSL015M6D
SSL015M6N
SSL015M6SN
SSL025M5CN
SSL025M6A
SSL025M6CN
SSL025M6D
SSL025M6DQ
SSL025M6H
SSL025M6HN
SSL025M6SQ
SSL037M5N
SSL037M6SN
SSM005M6SN
SSM009C5Q
SSM009C6Q
SSM009M5CN
SSM009M5HN
Nanonics
Part Number
0-1589469-6
1-1589470-5
3-1589469-5
3-1589469-9
0-1589469-7
0-1589469-8
0-1589469-9
0-1589470-2
3-1589469-6
3-1589469-8
1-1589469-0
1-1589469-1
4-1589469-5
0-1589470-3
3-1589469-7
4-1589469-0
1-1589469-2
1-1589469-3
1-1589469-4
1-1589469-5
1-1589469-6
0-1589470-4
4-1589469-1
1-1589469-7
0-1589461-1
0-1589471-1
0-1589470-5
0-1589470-6
0-1589461-4
0-1589471-3
3-1589469-2
4-1589469-2
3-1589469-3
0-1589461-3
1-1589470-3
4-1589469-4
3-1589469-4
4-1589488-8
6-1589488-5
0-1589488-7
6-1589487-1
7-1589487-8
0-1589482-6
0-1589488-8
6-1589488-6
5-1589488-1
0-1589487-6
6-1589487-4
7-1589487-5
0-1589487-7
0-1589482-1
0-1589481-1
1-1589488-0
1-1589488-1
5-1589488-2
0-1589487-9
6-1589487-3
1-1589487-0
6-1589487-5
7-1589487-6
1-1589487-1
1-1589487-2
4-1589488-9
1-1589488-3
DUALOBE Rectangular
Connectors
Nanonics
Part Number
5
5-1589488-9
2-1589488-0
1-1589487-9
5-1589487-6
6-1589487-9
2-1589487-0
2-1589487-1
5-1589487-7
2-1589487-2
0-1589482-7
0-1589481-3
2-1589488-1
7-1589488-1
2-1589488-2
2-1589488-3
2-1589488-4
2-1589488-5
2-1589488-6
2-1589488-7
6-1589488-7
2-1589487-3
6-1589487-8
2-1589487-4
2-1589487-5
5-1589487-8
2-1589487-6
2-1589487-7
2-1589487-8
0-1589489-1
0-1589489-3
0-1589482-2
1-1589482-1
0-1589481-4
6-1589488-4
2-1589488-8
2-1589488-9
3-1589488-0
177
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
STM025M5PQ
STM025M5SN
STM025M6AN
3-1589488-1
3-1589488-2
2-1589487-9
STM065M5FN
STM065M5HN
STM065M5IQ
5-1589488-5
5-1589488-0
7-1589488-2
STM025M6CN
STM025M6DQ
STM025M6HN
STM025M6IQ
STM025M6N
STM025M6Q
STM025M6SN
STM025M9AN
STM025M9HN
3-1589487-0
3-1589487-1
3-1589487-2
5-1589487-9
3-1589487-3
3-1589487-4
3-1589487-5
0-1589489-2
0-1589489-4
STM065M5LQ
STM065M5N
STM065M5SN
STM065M6
STM065M6AQ
STM065M6CN
STM065M6HN
STM065M6KN
STM065M6SN
4-1589488-6
4-1589488-7
6-1589488-9
5-1589487-0
7-1589487-3
5-1589487-1
5-1589487-3
6-1589487-2
5-1589487-4
STM037C5
STM037C5N
STM037C5Q
0-1589482-9
1-1589482-6
1-1589482-2
Flex Term "Duckbill"
STM037C6N
STM037C6Q
STM037M5AN
STM037M5AQ
STM037M5CN
STM037M5HN
STM037M5N
STM037M5PQ
STM037M5SN
STM037M6AN
STM037M6AQ
STM037M6CN
STM037M6DN
STM037M6DQ
STM037M6HN
STM037M6IQ
STM037M6SN
STM037M6SQ
STM051C5
STM051C5N
STM051C5Q
STM051C6N
STM051M5AQ
STM051M5CN
STM051M5DQ
STM051M5LQ
STM051M5PQ
STM051M5SN
STM051M6CN
STM051M6DQ
STM051M6HN
STM051M6N
STM051M6PQ
STM051M6SN
STM051M6SQ
STM065C5M
STM065C5N
STM065C5Q
STM065C6
STM065C6N
STM065M5AQ
STM065M5CN
0-1589481-5
0-1589481-9
3-1589488-3
5-1589488-7
3-1589488-4
3-1589488-5
3-1589488-6
3-1589488-7
3-1589488-8
3-1589487-6
3-1589487-7
7-1589487-9
3-1589487-8
3-1589487-9
4-1589487-0
6-1589487-0
4-1589487-1
4-1589487-2
1-1589482-0
0-1589482-3
0-1589482-4
0-1589481-6
3-1589488-9
4-1589488-0
4-1589488-1
4-1589488-2
4-1589488-3
6-1589488-8
4-1589487-3
4-1589487-4
4-1589487-5
7-1589487-2
4-1589487-6
4-1589487-7
4-1589487-8
0-1589482-8
1-1589482-4
0-1589482-5
0-1589481-7
0-1589481-8
7-1589488-0
4-1589488-4
STL00911378PC
STL00911378PCN
0-1589066-3
0-1589066-4
STL00911378SCN
STL01511378PCN
STL02511378PCN
STL02511378SCN
STL03711378PC
STL03711378PCN
STL05111378PCN
STL05111378SCHN
STL06511378PC
STL06511378PCN
STL06511378SCN
STM00911378PCN
STM00911378SCN
STM01511378PCN
STM01511378SCN
STM02511378PC
STM02511378PCN
STM02511378SCN
STM03711378PCN
STM03711378PCQ
STM03711378SCN
STM05111378PC
STM05111378PCM
STM05111378PCN
STM05111378PCQ
STM05111378SCN
STM06511378PC
STM06511378PCN
STM06511378PCQ
STM06511378SCN
0-1589067-1
0-1589066-5
0-1589066-6
0-1589067-2
2-1589066-4
0-1589066-7
0-1589066-8
0-1589067-3
0-1589066-9
1-1589066-0
0-1589067-4
1-1589066-1
0-1589067-6
2-1589066-3
0-1589067-7
1-1589066-2
1-1589066-3
0-1589067-8
1-1589066-4
1-1589066-5
1-1589067-2
1-1589066-6
1-1589066-7
1-1589066-8
1-1589066-9
0-1589067-9
2-1589066-2
2-1589066-0
2-1589066-1
1-1589067-0
Nanonics
Part Number
Tyco
Part Number
Solder Cup Termination
SSL00511500PCN
0-1589051-1
SSL00511500SCN
SSL00911500PC
SSL00911500PCN
SSL00911500SCN
SSL01511500PCM
SSL01511500PCN
SSL01511500SCN
SSM00511500PC
SSM00511500PCH
SSM00511500PCN
0-1589052-1
0-1589051-2
0-1589051-3
0-1589052-2
0-1589051-4
0-1589051-5
0-1589052-3
1-1589051-4
0-1589051-6
0-1589051-7
SSM00511500SCN
SSM00911500PC
SSM00911500PCN
0-1589052-4
0-1589051-8
0-1589051-9
SSM00911500SCN
SSM01511500PCN
SSM01511500SC
SSM01511500SCN
SSM02511500SCQ
SSM03711500PC
SSM03711500PCN
SSM05111500PCN
SSM05111500SCN
STL00911500PC
STL00911500PCN
STL00911500SCN
STL01511500PC
STL01511500PCN
STL01511500SCN
STL02511500PC
STL02511500PCN
STL02511500SC
STL03711500PCN
STL03711500SCN
STL05111500PCN
STL06511500PCN
STM00911500PCN
STM00911500SCN
STM01511500PCN
STM01511500PCQ
STM01511500SCHN
STM01511500SCN
STM01511500SCQ
STM02511500PC
STM02511500PCN
STM02511500PCQ
STM02511500SC
STM02511500SCN
STM03711500PCN
STM03711500PCQ
STM03711500SCN
STM05111500PCN
STM05111500PCQ
STM05111500SCN
STM05111500SCQ
STM06511500PC
1-1589052-1
1-1589051-0
0-1589052-5
1-1589052-0
0-1589052-7
1-1589051-1
1-1589051-2
1-1589051-3
0-1589052-8
2-1589053-2
0-1589053-1
0-1589054-1
2-1589053-1
0-1589053-2
0-1589054-2
0-1589053-3
0-1589053-4
0-1589054-3
0-1589053-5
0-1589054-4
0-1589053-6
1-1589053-8
0-1589053-7
0-1589054-5
0-1589053-8
0-1589053-9
0-1589054-6
0-1589054-7
1-1589054-4
1-1589053-0
1-1589053-1
2-1589053-3
0-1589054-8
0-1589054-9
1-1589053-2
1-1589053-3
1-1589054-0
1-1589053-4
1-1589053-5
1-1589054-1
1-1589054-5
1-1589053-6
Nanonics
Part Number
STM06511500PCN
STM06511500SCN
STM06511500SCQ
Tyco
Part Number
1-1589053-7
1-1589054-2
1-1589054-6
Panel Mount
PSM005SC2DC024N
PSM009SC2DC060N
PTM009SC2DC060N
PTM015SC2DC024N
PTM015SC2DC060N
PTM025SC2DC060N
PTM037SC2DC018N
0-1589851-2
0-1589851-1
0-1589050-7
0-1589050-4
0-1589050-5
0-1589050-6
0-1589050-3
PTM065SC2DC018N
0-1589050-2
178
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Environmentally Sealed Circular Connectors
NANONICS Circular
Connectors
6
Nanonics environmentally
sealed circular offering
represents one of the
industry's smallest and
most reliable connector
designs. These connectors
are ideally suited for applications where high density
and reliability, and reduced
size and weight are serious
design parameters. Along
with these attributes, they
also meet the immersion
requirements of IP67, more
specifically, one meter of
water for two hours.
Utilizing the same contact
system and materials as
the Dualobe® rectangular
series of connectors, the
circular connectors are
manufactured to the performance specifications of
MIL-DTL-83513.
The plug connectors are
offered in both a quick disconnect or threaded coupling configuration, and the
receptacle connectors are
offered in either a flush
mount or panel mount configuration. The quick disconnect plug will mate with
both the flush and panel
Specifications
Technical and Performance
Data
Electrical
Contact Resistance – .003 - .008
ohms
Current Rating – 1 amp max. per
contact
Dielectric Withstanding Voltage –
Volts RMS 60 Hz at room ambient conditions. At sea level 500V. At 70,000 ft.
150V.
Insulation Resistance – 5000
megohms min. (@ 500 VDC) at room
ambient conditions.
mount receptacles, while
the threaded coupling plug
will only mate with the
panel mount receptacle.
These connectors are
available in pin counts of
7, 19, and 44. Optional
backshells are also available for the plug connectors and the panel mount
receptacle. Ideal for cableto-cable or cable-to-panel
applications, Tyco
Electronics can also
accommodate harness
assemblies and custom
configurations.
Magnetic Permeability – 2 mu max.
Temperature Range — -55˚C to
+200˚C
Durability – 250 mates/demates
Jam Nut Torque–
7 Pos. - 6 in-lbs. max.
19 Pos. - 8 in-lbs. max.
44 Pos. - 10 in-lbs. max.
Coupling Nut Torque –
7 Pos. - 6 in-lbs. max.
19 Pos. - 8 in-lbs. max.
44 Pos. - 10 in-lbs. max.
179
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Quick Disconnect — Plug Assemblies
.25
[6.35]
Ø.165
[4.19]
Ø.25
[6.35]
.525
[13.34]
19 Position
Coupling Sleeve
O-Ring Seal
Position 1
Product Facts
n
n
n
n
n
n
Metal Shell
Positions: 7, 19 and 44
Environmental O-ring seal
Push-Pull quick-disconnect
coupling
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
Locking Ring
7 Position
Drawing Number 1589055
Plug Assembly,
Circular, Quick Disconnect,
Metal, 7 Position
.25
[6.35]
1589055
Ø .215
[5.46]
Ø .30
[7.62]
.525
[13.34]
Position 1
Coupling Sleeve
O-Ring Seal
Locking Ring
19 Position
Drawing Number 1589057
Plug Assembly,
Circular, Quick Disconnect,
Metal, 19 Position
1589057
180
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Quick Disconnect — Plug Assemblies (Continued)
.25
[6.35]
Ø.395
[10.03]
Ø.315
[8.00]
Position 1
NANONICS Circular
Connectors
.525
[13.34]
Coupling Sleeve
O-Ring Seal
6
Locking Ring
44 Position
Drawing Number 1589059
Plug Assembly,
Circular, Quick Disconnect,
Metal, 44 Position
1589059
181
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Quick Disconnect — Plug Assemblies with Backshells
Product Facts
n
n
n
n
n
n
.25
[6.35]
Metal Shell
Positions: 7, 19 and 44
Environmental O-ring seal
Factory wired to your
specifications
Backshell installed at
factory
Contact Tyco Electronics for
custom configurations
.215
[5.46]
Ø.130
[3.30]
Ø.25
[6.35]
Ø.165
[4.19]
.525
[13.34]
.275
[6.99]
Coupling Sleeve
O-Ring Seal
Position 1
Backshell
Locking Ring
7 Position
Drawing Number 1589691
Plug Assembly, Circular,
Quick Disconnect, Metal,
7 Position w/ Backshell
1589691
.25
[6.35]
.215
[5.46]
Ø.180
[4.57]
Ø.30
[7.62]
Ø.215
[5.46]
.525
[13.34]
Position 1
.275
[6.99]
Coupling Sleeve
O-Ring Seal
Backshell
Locking Ring
19 Position
Drawing Number 1589692
Plug Assembly, Circular,
Quick Disconnect, Metal,
19 Position w/ Backshell
1589692
182
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Quick Disconnect — Plug Assemblies with Backshells (Continued)
.25
[6.35]
.265
[6.73]
Ø.240
[6.10]
Ø .395
[10.03]
Ø.315
[8.00]
Position 1
.325
[8.26]
NANONICS Circular
Connectors
.525
[13.34]
Coupling Sleeve
O-Ring Seal
6
Locking Ring
Backshell
44 Position
Drawing Number 1589693
Plug Assembly, Circular,
Quick Disconnect, Metal,
44 Position w/ Backshell
1589693
183
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Quick Disconnect — Receptacle Assemblies, Flush Mount
.425
[10.80]
.060
[1.52]
Jam Nut
Ø.312
[7.92]
.065
[1.65]
19 Position
.250
[6.35] Max Panel Thickness
Position 1
O-Ring Seal
Product Facts
n
n
n
n
n
Metal Shell
Positions: 7, 19 and 44
Bulkhead O-ring seal
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
.204
[5.18]
.312
[7.92] Hex (Jam Nut)
7 Position
Drawing Number 1589056
Receptacle Assembly, Circular,
Flush Mount, Quick Disconnect,
Metal, 7 Position
1589056
.425
[10.80]
.060
[1.52]
Jam Nut
Ø.375
[9.53]
.250
[6.35] Max Panel Thickness
.065
[1.65]
O-Ring Seal
Position 1
.258
[6.55]
.375
[9.53] Hex (Jam Nut)
19 Position
Drawing Number 1589058
Receptacle Assembly, Circular,
Flush Mount, Quick Disconnect,
Metal, 19 Position
1589058
184
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Quick Disconnect — Receptacle Assemblies, Flush Mount (Continued)
.425
[10.80]
.060
[1.52]
Jam Nut
Ø.500
[12.7]
.258
[6.55]
.250
[6.35] Max Panel Thickness
.375
[9.53]
Position 1
NANONICS Circular
Connectors
O-Ring Seal
.065
[1.65]
.500
[12.7] Hex (Jam Nut)
44 Position
Drawing Number 1589690
6
185
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Threaded Coupling — Plug Assemblies
.375
[9.53]
Ø.165
[4.19]
Ø.315
[8.00]
19 Position
.525
[13.34]
Product Facts
n
n
n
n
n
Coupling Nut
Position 1
O-Ring Seal
Metal Shell
Positions: 7, 19 and 44
Environmental O-ring seal
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
7 Position
Drawing Number 1589063
Plug Assembly, Circular,
Panel Mount, Threaded Coupling,
Metal, 7 Position
1589063
.375
[9.53]
Ø.355
[9.02]
Ø .215
[5.46]
.525
[13.34]
Coupling Nut
Position 1
O-Ring Seal
19 Position
Drawing Number 1589064
Plug Assembly, Circular,
Panel Mount, Threaded Coupling,
Metal, 19 Position
1589064
186
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Threaded Coupling — Plug Assemblies (Continued)
.375
[9.53]
Ø .475
[12.07]
Ø.315
[8.00]
NANONICS Circular
Connectors
.525
[13.34]
Coupling Nut
Position 1
O-Ring Seal
6
44 Position
Drawing Number 1589065
Plug Assembly, Circular,
Threaded Coupling,
Metal, 7 Position
1589065
187
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Threaded Coupling — Plug Assemblies with Backshells
Product Facts
n
n
n
n
n
n
.375
[9.53]
Metal Shell
Positions: 7, 19 and 44
Environmental O-ring seal
Factory wired to your
specifications
Backshell installed at
factory
Contact Tyco Electronics for
custom configurations
Ø.315
[8.00]
.215
[5.46]
Ø.130
[3.30]
Ø.25
[6.35]
Ø.165
[4.19]
.525
[13.34]
.275
[6.99]
Coupling Sleeve
Position 1
O-Ring Seal
Backshell
7 Position
Drawing Number 1589686
Plug Assembly, Circular,
Panel Mount, Threaded Coupling,
Metal, 7 Position w/ Backshell
1589686
.375
[9.53]
.215
[5.46]
Ø.180
[4.57]
Ø.355
[9.02]
Ø.30
[7.62]
Ø.215
[5.46]
.525
[13.34]
.275
[6.99]
Coupling Nut
Position 1
O-Ring Seal
Backshell
19 Position
Drawing Number 1589688
Plug Assembly, Circular,
Threaded Coupling, Metal,
19 Position w/ Backshell
1589688
188
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Threaded Coupling — Plug Assemblies with Backshells (Continued)
.375
[9.53]
.265
[6.73]
Ø.240
[6.10]
Ø.475
[12.07]
Ø.395
[10.03]
Ø.315
[8.00]
.325
[8.26]
NANONICS Circular
Connectors
.525
[13.34]
Coupling Nut
Position 1
O-Ring Seal
6
Backshell
44 Position
Drawing Number 1589694
Plug Assembly, Circular,
Threaded Coupling, Metal,
44 Position w/ Backshell
1589694
189
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Threaded Coupling/Quick Disconnect — Receptacle Assemblies, Panel Mount
.550
[13.97]
.350
[8.89]
.065
[1.65]
19 Position
Ø.25
[6.35]
.060
[1.52]
Product Facts
n
n
n
n
n
n
Metal Shell
Positions: 7, 19 and 44
Bulkhead O-ring seal
Factory wired to your
specifications
Panel Mount receptacle
mates with the Quick
Disconnect Plug and the
Threaded Coupling Plug
Contact Tyco Electronics for
custom configurations
O-Ring Seal
Position 1
.406
[10.31] Hex
.258
[6.55]
Jam Nut
7 Position
Drawing Number 1589060
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/
Quick Disconnect, Metal, 7 Position
.550
[13.97]
.065
[1.65]
.350
[8.89]
1589060
Ø.30
[7.62]
.060
[1.52]
O-Ring Seal
Position 1
.469
[11.91] Hex
.298
[7.57]
Jam Nut
19 Position
Drawing Number 1589061
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/
Quick Disconnect, Metal, 19 Position
1589061
190
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Threaded Coupling/Quick Disconnect — Receptacle Assemblies, Panel Mount (Continued)
.065
[1.65]
.550
[13.97]
.350
[8.89]
Ø .395
[10.03]
.060
[1.52]
.563
[14.30] Hex
NANONICS Circular
Connectors
O-Ring Seal
Position 1
.414
[10.52]
Jam Nut
44 Position
Drawing Number 1589062
6
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/
Quick Disconnect, Metal, 44 Position
1589062
191
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Threaded Coupling/Quick Disconnect — Panel Mount Recp. Assemblies w/Backshells
Product Facts
n
n
n
n
n
n
Metal Shell
Positions: 7, 19 and 44
Bulkhead O-ring seal
Factory wired to your
specifications
Panel Mount receptacle
mates with the Quick
Disconnect Plug and the
Threaded Coupling Plug
Contact Tyco Electronics for
custom configurations
.275
[6.99]
.550
[13.97]
.350
[8.89]
.065
[1.65]
Ø.25
[6.35] Ø.130
[3.30]
.215
[5.46]
.060
[1.52]
O-Ring Seal
Position 1
.406
[10.31] Hex
.258
[6.55]
Backshell
Jam Nut
Receptacle Assembly 7 Position
Drawing Number 1589685
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/Quick Disconnect,
Metal, 7 Position w/ Backshell
1589685
.275
[6.99]
.065
[1.65]
.550
[13.97]
.350
[8.89]
Ø.30
[7.62] Ø.180
[4.57]
.215
[5.46]
.060
[1.52]
O-Ring Seal
Position 1
.469
[11.91] Hex
.298
[7.57]
Backshell
Jam Nut
Receptacle Assembly, Circular,
Receptacle Assembly 19 Position
Drawing Number 1589687 Panel Mount, Threaded Coupling/Quick Disconnect,
Metal, 19 Position w/ Backshell
1589687
192
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Threaded Coupling/Quick Disconnect — Panel Mount Recp. Assemblies w/Backshells (Continued)
.325
[8.26]
.065
[1.65]
Ø.395
[10.03]
.550
[13.97]
.350
[8.89]
Ø.240
[6.10]
NANONICS Circular
Connectors
.060
[1.52]
O-Ring Seal
Position 1
.563
[14.30] Hex
.414
[10.52]
Backshell
6
Jam Nut
Receptacle Assembly 44 Position
Drawing Number 1589695
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/Quick Disconnect,
Metal, 44 Position w/ Backshell
1589695
193
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Part Numbering Guideline for Environmentally Sealed Circular Connectors
Circular Connectors - Wire Terminations
XXX
XXX
XX
X
XX
XXX
X(X)
Class/Type
Circular Mounting/Features
QCM Quick Disconnect, Circular, Metal
TCM
Threaded Coupling, Circular, Metal
(TCM leadoff for plug only)
Mounting (Receptacles Only)
Features (Optional)
P Panel Mount
B Backshell (cannot be used with flush mount)
F Flush Mount
Positions
007 7 Position
Conductor Length
019 19 Position
XXX
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
044 44 Position
CXX
A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX
An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
Configuration
PC Plug
Conductor Type
SC Receptacle
Conductor Size/Strands
0
28 AWG Solid
1
30 AWG Solid
2
30 AWG 7 Strand
3
32 AWG 7 Strand
4
34 AWG 7 Strand
DX
White Teflon
DY
White PTFE per M16878/6
DC
Color Coded Teflon
DM
Color Coded Teflon per MIL-STD-681
DT
White Tefzel per M22759/33
194
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Part Number Index Cross Reference
Nanonics
Part Number
Tyco
Part Number
Quick Disconnect
0-1589055-1
0-1589055-2
0-1589691-5
0-1589055-3
0-1589691-1
0-1589691-2
0-1589055-6
0-1589691-9
1-1589055-3
0-1589691-3
0-1589055-8
0-1589055-9
0-1589691-6
1-1589055-0
1-1589691-0
1-1589055-4
1-1589055-8
1-1589055-5
1-1589055-6
0-1589691-7
1-1589055-1
1-1589055-7
0-1589691-8
0-1589691-4
0-1589060-1
0-1589060-2
0-1589056-1
0-1589060-3
0-1589060-4
0-1589685-2
0-1589685-3
0-1589056-2
1-1589060-1
0-1589060-7
0-1589685-4
0-1589056-9
1-1589060-4
0-1589056-7
0-1589056-3
0-1589060-9
1-1589060-0
0-1589685-5
0-1589685-1
0-1589056-8
0-1589056-4
0-1589056-5
0-1589056-6
1-1589060-2
1-1589060-5
1-1589060-3
0-1589057-1
0-1589692-1
0-1589057-3
0-1589057-4
0-1589692-3
0-1589057-5
0-1589057-6
0-1589692-5
0-1589692-2
QCM019PC2DCC10
QCM019PC2DMC150
QCM019PC2DMC150B
QCM019PC2DMC46
QCM019PC2DMM01
QCM019PC2DXC30
QCM019SC0DC012F
QCM019SC0DC036P
QCM019SC0DCC15P
QCM019SC0DM012F
QCM019SC0DM072F
QCM019SC0DMC30P
QCM019SC0DXC15P
QCM019SC2DC003F
QCM019SC2DC003P
QCM019SC2DC006F
QCM019SC2DC006P
QCM019SC2DC012F
QCM019SC2DC012P
QCM019SC2DC018F
QCM019SC2DC020F
QCM019SC2DC020P
QCM019SC2DC024P
QCM019SC2DC036P
QCM019SC2DC180F
QCM019SC2DCC30P
QCM019SC2DM006PB
QCM019SC2DM024P
QCM019SC2DM027PB
QCM019SC2DM036P
QCM019SC2DMC05F
QCM019SC2DMC16F
QCM019SC2DMC30P
QCM019SC2DMC46F
QCM019SC2DXC30F
QCM019SC2DXC30P
QCM019SC4DX006P
QCM044PC2DC003
QCM044PC2DC006
QCM044PC2DC006B
QCM044PC2DC012
QCM044PC2DC012B
QCM044PC2DC020
QCM044PC2DC030
QCM044PC2DC036
QCM044PC2DC040
QCM044PC2DC050
QCM044PC2DC060B
QCM044PC2DC120B
QCM044PC2DC180B
QCM044SC0DM036P
QCM044SC0DM048P
QCM044SC0DM060P
QCM044SC2DC003P
QCM044SC2DC006F
QCM044SC2DC006P
QCM044SC2DC012F
QCM044SC2DC012P
QCM044SC2DC018F
QCM044SC2DC018P
Tyco
Part Number
1-1589057-1
1-1589057-2
0-1589692-4
0-1589057-8
1-1589057-0
0-1589057-9
0-1589058-1
1-1589061-4
0-1589061-1
1-1589058-7
0-1589058-2
1-1589061-2
0-1589061-2
1-1589058-8
0-1589061-3
0-1589058-3
0-1589061-4
1-1589058-6
0-1589061-5
0-1589058-4
0-1589058-5
0-1589061-6
1-1589061-5
0-1589061-7
1-1589058-4
0-1589061-8
0-1589687-2
1-1589061-6
0-1589687-1
1-1589061-0
1-1589058-5
0-1589058-6
1-1589061-3
0-1589058-7
0-1589058-8
0-1589061-9
1-1589061-1
0-1589059-1
0-1589059-2
0-1589693-1
0-1589059-4
0-1589693-2
0-1589059-6
0-1589059-7
1-1589059-1
1-1589059-2
1-1589059-0
0-1589693-3
0-1589693-4
0-1589693-5
1-1589062-3
1-1589062-4
1-1589062-5
0-1589062-1
0-1589690-3
0-1589062-2
0-1589690-4
0-1589062-3
0-1589690-5
0-1589062-8
Nanonics
Part Number
QCM044SC2DC019PB
QCM044SC2DC020F
QCM044SC2DC020P
QCM044SC2DC024F
QCM044SC2DC024P
QCM044SC2DC036P
QCM044SC2DC060F
QCM044SC2DC080P
QCM044SC2DC180F
QCM044SC2DM036P
QCM044SC2DM120P
QCM044SC2DMC16P
QCM044SC2DMC46P
QCM044SC2DMC50P
QCM044SC3DC012F
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
0-1589695-1
0-1589690-1
1-1589062-2
0-1589690-8
1-1589062-6
0-1589062-5
0-1589690-6
1-1589062-1
0-1589690-2
0-1589062-9
1-1589062-0
0-1589062-6
0-1589062-7
1-1589062-7
0-1589690-7
TCM044PC2DC036
TCM044PC2DC036B
TCM044PC2DC202B
TCM044PC2DM036
TCM044PC2DM120
TCM044PC2DM120B
TCM044PC2DMC46
0-1589065-8
0-1589694-5
0-1589694-7
1-1589065-1
1-1589065-6
0-1589694-6
1-1589065-0
NANONICS Circular
Connectors
QCM007PC2DC003
QCM007PC2DC006
QCM007PC2DC006B
QCM007PC2DC012
QCM007PC2DC012B
QCM007PC2DC018B
QCM007PC2DC020
QCM007PC2DC020B
QCM007PC2DC028
QCM007PC2DC036B
QCM007PC2DC040
QCM007PC2DC072
QCM007PC2DCC20B
QCM007PC2DCC30
QCM007PC2DCC50B
QCM007PC2DCM01
QCM007PC2DCM02
QCM007PC2DCM03
QCM007PC2DMC150
QCM007PC2DMC150B
QCM007PC2DMC46
QCM007PC2DMC50
QCM007PC2DMC50B
QCM007PC2DX006B
QCM007SC2DC003P
QCM007SC2DC004P
QCM007SC2DC006F
QCM007SC2DC006P
QCM007SC2DC012P
QCM007SC2DC012PB
QCM007SC2DC018PB
QCM007SC2DC020F
QCM007SC2DC020P
QCM007SC2DC036P
QCM007SC2DC036PB
QCM007SC2DCC15F
QCM007SC2DCC15P
QCM007SC2DCC20F
QCM007SC2DCC30F
QCM007SC2DCC30P
QCM007SC2DM003P
QCM007SC2DM006PB
QCM007SC2DM050PB
QCM007SC2DMC05F
QCM007SC2DMC16F
QCM007SC2DMC46F
QCM007SC2DX006F
QCM007SC2DYC15P
QCM007SC2DYM02P
QCM007SC2DYM1.5P
QCM019PC0DC012
QCM019PC0DM072B
QCM019PC2DC003
QCM019PC2DC006
QCM019PC2DC006B
QCM019PC2DC012
QCM019PC2DC020
QCM019PC2DC020B
QCM019PC2DC120B
Nanonics
Part Number
Threaded Coupling
TCM007PC2DC003
TCM007PC2DC006
TCM007PC2DC006B
TCM007PC2DC012
TCM007PC2DC012B
TCM007PC2DC018B
TCM007PC2DC020
TCM007PC2DC036
TCM007PC2DCM02
TCM007PC2DM003
TCM007PC2DM006B
TCM007PC2DYC10B
TCM007PC2DYM01B
TCM019PC0DC036
TCM019PC0DCC10
TCM019PC0DXC10
TCM019PC2DC003
TCM019PC2DC006
TCM019PC2DC006B
TCM019PC2DC012
TCM019PC2DC012B
TCM019PC2DC020
TCM019PC2DC024
TCM019PC2DC036
TCM019PC2DC060B
TCM019PC2DC066
TCM019PC2DCC30
TCM019PC2DM006B
TCM019PC2DM024
TCM019PC2DM036
TCM044PC0DM036
TCM044PC0DM048
TCM044PC0DM060
TCM044PC2DC003
TCM044PC2DC006
TCM044PC2DC006B
TCM044PC2DC012
TCM044PC2DC012B
TCM044PC2DC018B
TCM044PC2DC019B
TCM044PC2DC020
TCM044PC2DC020B
TCM044PC2DC024
0-1589063-1
0-1589063-2
0-1589686-2
0-1589063-4
0-1589686-3
0-1589686-4
0-1589063-9
0-1589063-7
1-1589063-0
0-1589063-8
0-1589686-1
0-1589686-5
0-1589686-6
1-1589064-5
0-1589064-1
0-1589064-2
0-1589064-3
0-1589064-4
0-1589688-2
0-1589064-6
0-1589688-3
1-1589064-4
0-1589064-8
0-1589064-9
0-1589688-4
1-1589064-1
1-1589064-2
0-1589688-1
1-1589064-6
1-1589064-3
1-1589065-3
1-1589065-4
1-1589065-5
0-1589065-1
0-1589065-2
0-1589694-1
0-1589065-4
0-1589694-2
0-1589694-3
0-1589694-4
1-1589065-2
0-1589694-8
1-1589065-7
6
195
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Circular Connectors
Engineering Notes
196
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Coaxial Connectors
with 30 AWG or smaller
discrete wire, can also be
integrated into this connector package. These
connectors are typically
used in applications with
frequencies up to
20 GHz.
receptacle coax connector
is also available in a
horizontal surface mount
configuration allowing for
wire to board applications.
Harness assemblies and
custom configurations can
also be accommodated.
NANONICS Coaxial
Connectors
The Nanonics 50 ohm
coaxial connector system
combines the benefits of
the rectangular DUALOBE
connectors while offering
the flexibility to terminate
up to nine coaxial contacts
within the same metal
connector housing.
Furthermore, with this
unique design, five
signal contacts, terminated
RG-178 coax coaxial cable
is the standard cable used
on these connectors. The
7
Specifications
Technical and Performance
Data
Electrical
Contact Resistance – .003 - .008
ohms
Current Rating – 1 amp max. per
contact
Dielectric Withstanding Voltage –
Volts RMS 60 Hz at room ambient conditions. At sea level 500V. At 70,000 ft.
150V.
Insulation Resistance – 5000
megohms min. (@ 500 VDC) at room
ambient conditions.
Magnetic Permeability – 2 mu max.
Temperature Range — -55˚C to
+125˚C
Outer Coaxial Contacts – BeCu Alloy
plated with gold per MIL-G-45204 over
nickel
Dielectric Insert – Teflon
Braid Termination – Soldered to
outer coaxial contacts with SN63P637
solder
Backpotting – Standard for wire
terminations
197
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Typical VSWR and Insertion Loss
Note: Insertion Loss of 30 AWG Coax
Cable @ (50 Ohm) is approximately
1.0db/ft. @ 3 GHz. The connector system
with 6" of coax on each side, is better than
1.5db @ 3 GHz.
198
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
50 Ohm Coax Connectors
D
.100
[2.54]
Plug
.075
2 Plcs.
[1.91]
.205
[5.21]
.117
[2.97]
B
C
.100
[2.54] Pitch
.078
[1.98] Typ.
.166
[4.22]
Receptacle
Plug Assembly
Drawing Number 1589070
Plug Assembly, 1-9 Coax
Only, 50 OHM, Metal
Product Facts
n
n
n
D
Metal Shell
Standard Sizes: 1-9
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
1589070
NANONICS Coaxial
Connectors
n
.100
[2.54]
.112
[2.84] 2 Plcs.
.223
[5.66]
B
.078
[1.98] Typ.
7
B
.100
Pitch
[2.54]
.166
[4.22]
C
Receptacle Assembly
Drawing Number 1589071
Size
1
2
3
4
5
6
7
8
9
B
0.254
0.354
0.454
0.554
0.654
0.754
0.854
0.954
1.054
[6.45]
[8.99]
[11.53]
[14.07]
[16.61]
[19.15]
[21.69]
[24.23]
[26.77]
Dimensions
C
0.335 [8.51]
0.435 [11.05]
0.535 [13.59]
0.635 [16.13]
0.735 [18.67]
0.835 [21.21]
0.935 [23.75]
1.035 [26.29]
1.135 [28.83]
Receptacle Assembly, 1-9 Coax
No. Coax
Only, 50D OHM, Metal
0.180 [4.57]
1589071
0.280 [7.11]
0.380 [9.65]
0.480 [12.19]
0.580 [14.73]
0.680 [17.27]
0.780 [19.81]
0.880 [22.35]
0.980 [24.89]
1
2
3
4
5
6
7
8
9
199
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Part Numbering Guideline for 50 Ohm Coax Connectors
Coax Only Connectors - Wire Terminations
CX
XXX
XX
2
RG
XXX
Class/Type
CX
X
Threads/Jackscrews
Coax, 50 Ohm
Positions
Threads (Receptacles Only)
Jackscrews (Plugs Only)
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrews
Q Thread for 1.2 mm Jackscrews
N
1.0 mm Captive Jackscrews
Q
1.2 mm Captive Jackscrews
010 1 Position
020 2 Position
Conductor Length
030 3 Position
XXX
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
040 4 Position
CXX
A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
050 5 Position
MXX
An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
060 6 Position
070 7 Position
080 8 Position
Conductor Type
090 9 Position
RG
RG 178 Coaxial Cable
Configuration
Conductor Size
PC Plug
2
30 AWG
SC Receptacle
200
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Horizontal SMT 50 Ohm Coax Connectors
.100
[2.54] Pitch
.0415
[1.05]
.0075
Typ.
[.19]
A
.112
[2.84] 2 Plcs.
.223
[5.66]
Surface Mount
B
Product Facts
n
n
n
n
B
Metal Shell
Standard Sizes: 1-9
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
.100
[2.54] Pitch
.078
[1.98] Typ.
.166
[4.22]
.024
[.61] Typ.
.323
[8.20] Typ.
C
Receptacle Assembly
Drawing Number Receptacle
1589072 Assembly,
NANONICS Coaxial
Connectors
Horizontal SMT, 1-9 Coax
Only, 50 OHM, Metal
1589072
Size
1
2
3
4
5
6
7
8
9
A
0.0125 [.32]
0.0625 [1.59]
0.1125 [2.86]
0.1625 [4.13]
0.2125 [5.40]
0.2625 [6.67]
0.3125 [7.94]
0.3625 [9.21]
0.4125 [10.48]
Dimensions
B
0.254 [6.45]
0.354 [8.99]
0.454 [11.53]
0.554 [14.07]
0.654 [16.61]
0.754 [19.15]
0.854 [21.69]
0.954 [24.23]
1.054 [26.77]
C
0.335
0.435
0.535
0.635
0.735
0.835
0.935
1.035
1.135
[8.51]
[11.05]
[13.59]
[16.13]
[18.67]
[21.21]
[23.75]
[26.29]
[28.83]
No. Coax
1
2
3
4
5
6
7
8
9
7
201
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Part Numbering Guideline for Horizontal SMT 50 Ohm Coax Connectors
Coax Only Connectors - SMT Termination
CX
XXX
L2
XXX
X
Class/Type
Jackscrew Threads
CX Coax, 50 ohm
Threads
N Thread for 1.0 mm Jackscrews
Positions
Q Thread for 1.2 mm Jackscrews
010 1 Position
020 2 Position
Mounting Hardware
030 3 Position
A
1.2 mm x .160”
040 4 Position
H
1.0 mm x .160”
050 5 Position
060 6 Position
070 7 Position
Configuration
080 8 Position
L2
Receptacle, Horizontal SMT
090 9 Position
202
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
50 Ohm Coax with Mixed Signal Connectors
D
.100
[2.54]
.075
[1.91] 2 Plcs.
.205
[5.21]
Plug
.117
[2.97]
B
.078
[1.98] Typ.
.038
2 Plcs.
[.97]
.118
[3.00] 2 Plcs.
C
.166
[4.22]
Receptacle
.050
[1.27]
.100
[2.54] Pitch
Product Facts
n
n
n
.100
[2.54]
Metal Shell
Standard Sizes: 1-9 coaxial
contacts with 5 signal
contacts
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
Plug Assembly
Drawing Number 1589068
Plug Assembly, 1-9 Coax
Only, 50 OHM, 5 Signals,
Metal
.223
[5.66] 1589068
NANONICS Coaxial
Connectors
n
D
.025
[.64]
.112
[2.84] 2 Plcs.
B
B
.078
[1.98] Typ.
.038
[.97] 2 Plcs.
7
.166
[4.22]
.118
[3.00] 2 Plcs.
.025
[.64]
.050
[1.27]
.100
[2.54] Pitch
C
Receptacle Assembly
Drawing Number 1589069
Size
1
2
3
4
5
6
7
8
9
B
0.254
0.354
0.454
0.554
0.654
0.754
0.854
0.954
1.054
[6.45]
[8.99]
[11.53]
[14.07]
[16.61]
[19.15]
[21.69]
[24.23]
[26.77]
Dimensions
C
0.335 [8.51]
0.435 [11.05]
0.535 [13.59]
0.635 [16.13]
0.735 [18.67]
0.835 [21.21]
0.935 [23.75]
1.035 [26.29]
1.135 [28.83]
Receptacle Assembly, 1-9 Coax
Only, 50 OHM, 5 Signals,
Metal
1589069
D
0.180
0.280
0.380
0.480
0.580
0.680
0.780
0.880
0.980
[4.57]
[7.11]
[9.65]
[12.19]
[14.73]
[17.27]
[19.81]
[22.35]
[24.89]
No. Coax
1
2
3
4
5
6
7
8
9
203
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Part Numbering Guideline for 50 Ohm Coax with Mixed Signal Connectors
Coax w/ Mixed Signal Connectors - Wire Terminations
CX
XXX
XX
2
X
R
XXX
X
Class/Type
Threads/Jackscrew
CX Coax, 50 ohm
Positions
Threads (Receptacles Only)
Jackscrews (Plugs Only)
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrews
Q Thread for 1.2 mm Jackscrews
015 1 Position w/ 5 Signals
025 2 Position w/ 5 Signals
N
1.0 mm Captive Jackscrews
Q
1.2 mm Captive Jackscrews
Conductor Length
035 3 Position w/ 5 Signals
045 4 Position w/ 5 Signals
055 5 Position w/ 5 Signals
XXX
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX
A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX
An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
065 6 Position w/ 5 Signals
075 7 Position w/ 5 Signals
085 8 Position w/ 5 Signals
Conductor Type (Signals)
095 9 Position w/ 5 Signals
C
Color Coded Teflon
X
White Teflon
Configuration
PC Plug
Conductor Type (Coax)
SC Receptacle
R
RE-178 Coaxial Cable
Conductor Size
2
30 AWG 7 Strand
204
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Part Number Index Cross Reference
Nanonics
Part Number
Tyco
Part Number
Coax Only
Nanonics
Part Number
Tyco
Part Number
Coax with Mixed Signals
Nanonics
Part Number
Tyco
Part Number
Horizontal SMT Coax
0-1589070-1
CX015PC2RC012
0-1589068-1
CX010L2AQ
1-1589072-3
CX010PC2RG018N
CX010PC2RG048Q
CX010PC2RG072N
CX010PC2RGC10Q
CX010SC2RG048Q
CX020PC2RG018N
CX020PC2RG048N
CX020PC2RG060N
CX020SC2RG012N
CX020SC2RG018N
0-1589070-2
2-1589070-8
0-1589070-3
2-1589070-1
2-1589071-3
0-1589070-4
2-1589070-5
1-1589070-8
2-1589071-0
2-1589071-5
CX015PC2RC012N
CX015SC2RC012N
CX035PC2RC006N
CX035PC2RC018N
CX035SC2RC006N
CX035SC2RC018N
CX045PC2RC006N
CX045PC2RC036N
CX045PC2RC036Q
CX045SC2RC006N
0-1589068-5
0-1589069-1
0-1589068-2
0-1589068-3
0-1589069-2
0-1589069-3
0-1589068-4
0-1589068-9
1-1589068-0
0-1589069-4
CX010L2HN
CX020L2HN
CX030L23N
CX030L23Q
CX030L2HN
CX040L2AQ
CX040L2HN
CX050L23Q
CX050L2HN
CX060L2AQ
0-1589072-1
1-1589072-2
0-1589072-2
0-1589072-5
0-1589072-3
1-1589072-0
1-1589072-6
0-1589072-6
0-1589072-9
1-1589072-1
CX020SC2RG024N
CX020SC2RG024Q
CX020SC2RG060N
0-1589071-8
2-1589071-8
2-1589071-2
CX045SC2RC006Q
CX055PC2RC006N
CX055SC2RC006N
0-1589069-7
0-1589068-6
0-1589069-5
CX060L2HN
CX070L2AQ
CX080L2HN
1-1589072-5
1-1589072-4
0-1589072-4
CX030PC2RG006N
CX030PC2RG012
CX030PC2RG012N
CX030PC2RG018N
CX030PC2RG020Q
CX030PC2RG048N
CX030PC2RG060N
CX030SC2RG006N
CX030SC2RG012
CX030SC2RG012N
CX030SC2RG060N
CX040PC2RG012N
CX040PC2RG030N
CX040PC2RG039Q
CX040PC2RG060N
CX040SC2RG012
CX040SC2RG024N
CX050PC2RG006N
CX050SC2RG006N
CX060PC2RG012N
CX060PC2RG012Q
CX060PC2RG018N
CX060PC2RG036N
CX060PC2RG072N
CX060PC2RG144N
CX060PC2RGC10Q
CX060SC2RG012Q
CX070PC2RGC10Q
CX080PC2RG006N
CX080PC2RG012N
CX080PC2RG012Q
CX080PC2RG018N
CX080PC2RG024N
CX080PC2RG036N
CX080PC2RG048N
CX080PC2RG060N
CX080PC2RGC10N
CX080SC2RG012N
CX080SC2RG012Q
CX080SC2RG015N
CX080SC2RG024N
CX090PC2RG036N
CX090SC2RG036N
0-1589070-5
0-1589070-6
0-1589070-7
0-1589070-8
0-1589070-9
2-1589070-4
2-1589070-6
0-1589071-3
0-1589071-4
1-1589071-8
2-1589071-1
1-1589070-0
1-1589070-1
3-1589070-7
1-1589070-7
0-1589071-5
0-1589071-7
1-1589070-4
1-1589071-9
3-1589070-8
3-1589070-3
3-1589070-5
3-1589070-0
3-1589070-1
3-1589070-2
2-1589070-0
2-1589071-6
2-1589070-3
2-1589070-2
3-1589070-9
3-1589070-4
3-1589070-6
2-1589070-9
1-1589070-5
1-1589070-6
1-1589070-9
2-1589070-7
2-1589071-4
2-1589071-7
1-1589071-7
0-1589071-9
1-1589070-2
0-1589071-6
CX095PC2RC006N
CX095PC2RC036N
CX095SC2RC006N
0-1589068-7
0-1589068-8
0-1589069-6
NANONICS Coaxial
Connectors
CX010PC2RG006N
7
205
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Coaxial Connectors
Engineering Notes
206
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Strip Connectors
Strip Connectors
The Nanonics strip connectors are the smallest
connectors in the Nanonics
product line. They are
molded from LCP and are
ideal for applications where
the height and weight of the
connector is a serious
design parameter. Just
.040” in height, these
Polarization
connectors are well suited
for low-profile applications.
Standard sizes are 4, 9,
and 15, while 25, 37, and
51 are also available upon
request. Standard
configurations include
wired, surface mount, or
thru-hole terminations.
Guide pins are available for
polarization. Harness
assemblies and custom
configurations can also be
accommodated.
NANONICS Strip
Connectors
Polarization of the strips is
accomplished with the use
of optional polarizing guide
posts.
Polarization Position
"T" Shown
8
207
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Strip Connectors
Wired Connectors — Unshrouded, Flying Leads
Product Facts
n
n
n
n
Plastic Shell
Standard Sizes: 4, 9, 15,
25, 37 and 51
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
.111
[2.82]
.205
[5.21]
.060
[1.52] Typ.
L
L
Position 1
.040
[1.02]
Position 1
.040
[1.02]
C
C
Receptacle Assembly
Drawing Number 1589449
Plug Assembly
Drawing Number 1589448
Plug Assembly,
Unshrouded Strip,
Flying Leads, Plastic
Receptacle Assembly,
Unshrouded Strip,
Flying Leads, Plastic
1589449
1589448
Size
4
9
15
25
37
51
Dimensions
C
0.115 [2.92]
0.240 [6.10]
0.390 [9.91]
0.640 [16.26]
0.940 [23.88]
1.290 [32.77]
L
0.075 [1.91]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
208
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Strip Connectors
Part Numbering Guideline for Strip Wired Connectors
Strip Connectors - Wire Terminations
USS
XXX
XX
X
XX
XXX
Class/Row/Type
X
Polarization (optional)
USS Unshrouded, 1 row, strip
Plug contains guide post
Receptacle accepts guide post
Positions
004 4 Position
009 9 Position
Conductor Length
015 15 Position
XXX
025 25 Position
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX A “C” followed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
Configuration
PC Plug
Conductor Type
SC Receptacle
DX
White Teflon
DY
White PTFE per M16878/6
DC
Color Coded Teflon
DM
Color Coded Teflon per MIL-STD-681
DT
White Tefzel per M22759/33
Conductor Size/Strands
0 28 AWG Solid
1 30 AWG Solid
2 30 AWG 7 Strand
3 32 AWG 7 Strand
4 34 AWG 7 Strand
Polarization (Strip Type Only)
T = One Pin
vjjjjjjjj
U = One Pin
jvjjjjjjj
V = One Pin
jjvjjjjjj
W = Two Pin
vjjjjjjvj
Y = Two Pin
vjjjjjvjj
Z = Two Pin
jvjjjjvjj
NANONICS Strip
Connectors
8
209
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Strip Connectors
Surface Mount Connectors — Unshrouded
Product Facts
n
n
n
n
n
A
Plastic Shell
Standard Sizes: 4, 9, 15,
25, 37 and 51
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
Suggested Pad Layouts are
available on the referenced
drawings on the Tyco
Electronics website
.025
[.64] Pitch
.020
Typ.
[.51]
.255
[6.48] Typ.
.205
[5.21]
L
Position 1
.040
[1.02]
C
Plug Assembly
Drawing Number 1589451
Plug Assembly, Unshrouded Strip,
Horizontal SMT, Plastic
1589451
A
.020
[.51] Typ.
.025
[.64] Pitch
.161
[4.09] Typ.
.111
[2.82]
.060
[1.52] Typ.
L
Position 1
.040
[1.02]
C
Receptacle Assembly
Drawing Number 1589452
Receptacle Assembly, Unshrouded Strip,
Horizontal SMT, Plastic
1589452
Size
4
9
15
25
37
51
A
0.0375
0.1000
0.1750
0.3000
0.4500
0.6250
[.95]
[2.54]
[4.45]
[7.62]
[11.43]
[15.88]
Dimensions
C
0.115 [2.92]
0.240 [6.10]
0.390 [9.91]
0.640 [16.26]
0.940 [23.88]
1.290 [32.77]
L
0.075 [1.91]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
210
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Strip Connectors
Thru-Hole Connectors — Unshrouded, Horizontal, 1 Row to 2 Row, .050 Spacing
Product Facts
n
n
n
n
n
.050
[1.27] Typ.
Plastic Shell
Standard Sizes: 4, 9, 15,
25, 37 and 51
Factory wired to your
specifications
Contact Tyco Electronics for
custom configurations
Suggested Thru-Hole
Layouts are available on
the referenced drawings on
the Tyco Electronics
website
.255
[1.27] Typ.
.205
[5.21]
L
.090
[2.29] Typ.
.040
[1.02]
Position 1
C
Plug Assembly
Drawing Number 1589453
Plug Assembly, Unshrouded Strip,
Horizontal Mount, Through Hole,
1 to 2 Row, .050 Spacing
1589453
.050
[1.27] Typ.
.161
Typ.
[4.09]
.060
[1.52] Typ.
.111
[2.82]
NANONICS Strip
Connectors
L
Position 1
.090
[2.29] Typ.
.040
[1.02]
C
Receptacle Assembly
Receptacle Assembly, Unshrouded Strip,
Drawing Number 1589454
Horizontal Mount, Through Hole,
1 to 2 Row, .050 Spacing
Size
4
9
15
25
37
51
Dimensions
C
0.115 [2.92]
0.240 [6.10]
0.390 [9.91]
0.640 [16.26]
0.940 [23.88]
1.290 [32.77]
8
1589454
L
0.075 [1.91]
0.200 [5.08]
0.350 [8.89]
0.600 [15.24]
0.900 [22.86]
1.250 [31.75]
211
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Strip Connectors
Part Numbering Guideline for Surface Mount and Thru Hole Termination
Strip Connectors - Surface Mount and Thru Hole Terminations
USS
XXX
XX
Class/Row/Type
X
Polarization (optional)
USS Unshrouded, 1 row, strip
Plug contains guide post
Receptacle accepts guide post
Positions
004 4 Position
009 9 Position
Configuration
015 15 Position
B2
Plug, Horizontal SMT
025 25 Position
L2
Receptacle, Horizontal SMT
C6
Plug, Horizontal Mount, Thru Hole
M6 Receptacle, Horizontal Mount, Thru Hole
Polarization (Strip Type Only)
T = One Pin
vjjjjjjjj
U = One Pin
jvjjjjjjj
V = One Pin
jjvjjjjjj
W = Two Pin
vjjjjjjvj
Y = Two Pin
vjjjjjvjj
Z = Two Pin
jvjjjjvjj
212
Catalog 1308885
Issued 3-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Strip Connectors
Part Number Index Cross Reference
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
Tyco
Part Number
Nanonics
Part Number
0-1589448-1
USS004PC2DC006
USS004PC2DC006T
USS004PC2DC008
USS004PC2DC012
USS004PC2DC012T
USS004PC2DC012U
USS004PC2DC024
USS004PC2DC036
USS004PC2DC036T
USS004PC2DCC20T
0-1589448-2
5-1589448-5
6-1589448-8
0-1589448-3
0-1589448-4
0-1589448-5
0-1589448-6
0-1589448-7
0-1589448-8
5-1589448-9
USS004SC3DC018
USS004SC3DX004T
USS004SC4DXC30
1-1589449-8
1-1589449-9
8-1589449-2
USS009SC3DC036
USS009SC3DX004T
USS015PC1DC036T
7-1589449-6
4-1589449-4
7-1589448-3
Surface Mount
USS004PC2DC003
USS009PC0DC006T
USS009PC2DC006
USS009PC2DC006W
USS009PC2DC008U
USS009PC2DC012
USS009PC2DC012T
USS009PC2DC012V
USS009PC2DC018V
USS009PC2DC024
1-1589448-6
1-1589448-7
1-1589448-8
5-1589448-2
1-1589448-9
2-1589448-0
2-1589448-1
2-1589448-2
2-1589448-3
USS015PC1DC036W
USS015PC2DC006
USS015PC2DC012
USS015PC2DC012T
USS015PC2DC012V
USS015PC2DC018
USS015PC2DC018V
USS015PC2DMC60T
USS015PC2DX004T
USS004PC2DCC30
USS004PC2DCM01
USS004PC2DM012T
0-1589448-9
5-1589448-7
7-1589448-2
USS009PC2DC036
USS009PC2DC036T
USS009PC2DC036U
2-1589448-4
2-1589448-5
2-1589448-6
USS004PC2DM024T
USS004PC2DMC30
USS004PC2DMC40
USS004PC2DMC50
USS004PC2DMM01
USS004PC2DMM02
USS004PC2DNC40
USS004PC2DX006
USS004PC2DX012
USS004PC2GX006
USS004PC2GX024
USS004PC3DC018
USS004PC4DXC10
USS004SC2DC002
USS004SC2DC003
USS004SC2DC003T
USS004SC2DC004
USS004SC2DC006
USS004SC2DC006T
USS004SC2DC008
USS004SC2DC012
USS004SC2DC012T
USS004SC2DC012U
USS004SC2DC024
USS004SC2DC036
USS004SC2DC048
USS004SC2DCC20T
USS004SC2DCC30
USS004SC2DCM01
USS004SC2DM012T
USS004SC2DM024T
USS004SC2DMC30
USS004SC2DMC40
USS004SC2DMC50
USS004SC2DMM01
USS004SC2DMM02
USS004SC2DNC40
USS004SC2DTC20T
USS004SC2DX006
USS004SC2DX012T
USS004SC2GX006
USS004SC2GX024
7-1589448-6
6-1589448-9
7-1589448-1
6-1589448-7
6-1589448-0
6-1589448-1
1-1589448-0
1-1589448-1
1-1589448-2
1-1589448-3
1-1589448-4
1-1589448-5
7-1589448-0
0-1589449-1
0-1589449-2
0-1589449-3
0-1589449-4
0-1589449-5
6-1589449-2
8-1589449-0
0-1589449-6
0-1589449-7
0-1589449-8
0-1589449-9
1-1589449-0
1-1589449-1
7-1589449-1
1-1589449-2
6-1589449-7
8-1589449-4
8-1589449-9
8-1589449-1
8-1589449-3
7-1589449-9
7-1589449-2
7-1589449-3
1-1589449-3
8-1589449-5
1-1589449-4
1-1589449-5
1-1589449-6
1-1589449-7
USS009PC2DC036V
USS009PC2DCC05T
USS009PC2DCM01
USS009PC2DM012T
USS009PC2DM024T
USS009PC2DX001
USS009PC2DX004T
USS009PC2DX006T
USS009PC2DX012
USS009PC2GX006
USS009PC2GX012
USS009PC3DC036
USS009SC0DC006T
USS009SC2DC004
USS009SC2DC006
USS009SC2DC006W
USS009SC2DC006Z
USS009SC2DC008
USS009SC2DC012
USS009SC2DC012T
USS009SC2DC012Z
USS009SC2DC018
USS009SC2DC018T
USS009SC2DC018V
USS009SC2DC024
USS009SC2DC025T
USS009SC2DC036T
USS009SC2DC036U
USS009SC2DC036V
USS009SC2DC036W
USS009SC2DC060T
USS009SC2DCC05T
USS009SC2DCM01
USS009SC2DCM01T
USS009SC2DM012T
USS009SC2DM024T
USS009SC2DT012T
USS009SC2DX004T
USS009SC2DX006T
USS009SC2DX012
USS009SC2GX006
USS009SC2GX012
2-1589448-7
2-1589448-8
5-1589448-8
7-1589448-5
7-1589448-7
2-1589448-9
Wire Terminations
3-1589448-0
3-1589448-1
3-1589448-2
3-1589448-3
USS004B2
0-1589451-1
7-1589448-4
3-1589448-5
3-1589448-6
3-1589448-7
3-1589448-8
3-1589448-9
5-1589448-6
4-1589448-0
4-1589448-1
USS004B2T
USS004B4
USS004B45T
USS004B4T
USS004L2
USS004L2T
USS009B2
USS009B2T
USS009B2TE
USS009B2Z
0-1589451-2
0-1589775-1
0-1589450-1
3-1589683-2
0-1589452-1
0-1589452-2
0-1589451-3
0-1589451-5
1-1589451-5
0-1589451-6
USS015PC2DX012
USS015PC2DX024T
USS015PC3DC036
4-1589448-2
4-1589448-3
6-1589448-6
USS009B43T
USS009B4T
USS009L2
5-1589683-6
5-1589683-7
0-1589452-3
USS015SC1DC036T
USS015SC1DC036W
USS015SC2DC006
USS015SC2DC012
USS015SC2DC012T
USS015SC2DC018V
USS015SC2DC024T
USS015SC2DC036
USS015SC2DC036T
USS015SC2DMC60T
USS015SC2DX004T
USS015SC2DX006T
USS015SC2DX018T
USS015SC3DC036
USS015SC3DX004T
USS025PC2DC006
USS025PC2DC012
USS025PC2DT006T
USS025PC2DX018T
USS025SC2DC006
USS025SC2DC012
USS025SC2DT006T
USS037PC1DXC20
USS037PC2DC006
USS037PC2DC012
USS037PC2DC020T
USS037PC2DNC50
USS037PC2DT006T
USS037SC1DXC20
USS037SC1DY006
USS037SC2DC006
USS037SC2DC012
USS037SC2DC036T
USS037SC2DT006T
USS037SC2DX006T
USS051PC2DC012
USS051PC2DX012
USS051SC2DC012
8-1589449-6
8-1589449-7
4-1589449-6
4-1589449-7
4-1589449-8
6-1589449-4
USS009L2T
USS009L2U
USS009L2V
USS015B2
USS015B2T
USS015B4T
USS015L2
USS015L2T
USS015L2V
USS025B2
USS025B4T
USS025L2
USS025L4T
USS037B2
USS037B2T
USS037L2
USS037L2T
USS051B2
USS051L2
0-1589452-4
0-1589452-5
0-1589452-6
0-1589451-8
0-1589451-9
7-1589683-6
0-1589452-7
0-1589452-8
0-1589452-9
1-1589451-0
8-1589683-6
1-1589452-0
8-1589683-7
1-1589451-1
1-1589451-4
1-1589452-1
1-1589452-2
1-1589451-3
1-1589452-3
6-1589449-1
7-1589449-8
4-1589449-9
5-1589449-0
5-1589449-1
6-1589449-5
5-1589449-2
7-1589449-7
5-1589449-3
4-1589448-4
6-1589448-2
5-1589448-3
4-1589448-5
5-1589449-4
7-1589449-4
5-1589449-9
4-1589448-6
4-1589448-7
6-1589448-4
4-1589448-8
4-1589448-9
5-1589448-4
5-1589449-5
6-1589449-6
5-1589449-6
7-1589449-5
6-1589449-9
6-1589449-0
5-1589449-7
5-1589448-0
5-1589448-1
5-1589449-8
Thru-Hole
USS004C6
USS004C6T
USS004M6
USS009C6
USS009C6T
USS009C6V
USS009M6
USS015C6
0-1589453-1
0-1589453-6
0-1589454-1
0-1589453-2
0-1589453-3
0-1589453-4
0-1589454-2
0-1589453-5
NANONICS Strip
Connectors
3-1589448-4
6-1589448-5
7-1589449-0
2-1589449-0
2-1589449-1
2-1589449-2
2-1589449-3
2-1589449-4
2-1589449-5
2-1589449-6
2-1589449-7
2-1589449-8
2-1589449-9
6-1589449-3
3-1589449-0
3-1589449-1
3-1589449-2
3-1589449-3
3-1589449-4
3-1589449-5
3-1589449-6
3-1589449-7
6-1589449-8
3-1589449-8
8-1589449-8
9-1589449-0
9-1589449-1
3-1589449-9
4-1589449-0
4-1589449-1
4-1589449-2
4-1589449-3
Tyco
Part Number
8
213
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Strip Connectors
Engineering Notes
214
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRONOT and NANONICS Connectors
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Page
160
Part No.
010-3008-0000
Page
81
Part No.
031-0095-0001
Page
99, 101, 131
1589490
151
010-3009-0000
81
031-0098-0001
106
1589685
192
010-3010-0000
81
031-0125-0001
97
Page
157
1589686
188
031-0001-0001
93
031-0318-0001
97
1589687
192
031-0001-0001
97
031-0450-0001
97
1589050
168
1589688
188
031-0001-0003
93, 97
031-0459-0001
97
1589051
164
1589690
185
031-0002-0001
93, 97
031-0467-0001
96
1589052
164
1589691
182
031-0003-0001
93, 97
032-0002-0001
103, 104, 132
1589053
165
1589692
182
031-0004-0001
103, 105
032-0010-0001
93, 94, 129
1589054
165
1589693
183
031-0005-0001
103, 105
032-0011-0001
93, 94, 129
1589055
180
1589694
189
031-0006-0001
93, 98, 103, 105
032-0012-0001
103, 104, 132
1589056
184
1589695
193
031-0017-0001
93, 97
032-0013-0001
93, 95, 130
1589057
180
1589735
145
031-0018-0001
93, 97
032-0014-0001
93, 95, 130
1589058
184
1589736
145
031-0019-0001
93, 98
032-0015-0001
93, 95, 130
1589059
181
1589737
147
031-0020-0001
103, 105
032-0016-0001
103, 104, 132
1589060
190
1589738
147
031-0021-0001
103, 105
032-0017-0001
93, 94, 129
1589061
190
1589803
146
031-0024-0001
93, 97
032-0020-0001
103, 132
1589062
191
1589804
148
031-0032-0001
93, 96, 130
032-0021-0001
93, 94, 129
1589063
186
1589851
167
031-0033-0001
93, 96, 130
032-0022-0001
93, 94, 129
1589064
186
1589449
208
031-0034-0001
93, 96
032-0023-0001
93, 94, 129
1589065
187
010-0003-000
94
031-0036-0001
93, 96, 130
032-0025-0001
93, 94, 129
1589066
162
010-0003-0000
96
031-0037-0001
93, 96, 130
032-0026-0001
103, 104, 132
1589067
163
010-0004-000
94
031-0038-0001
103, 105, 132
032-0027-0001
103, 104, 132
1589068
203
010-0004-0000
96
031-0040-0001
103, 105, 132
032-0030-0001
103, 104, 132
1589069
203
010-0005-000
94
031-0046-0001
93, 98
032-0031-0001
103, 104, 132
1589070
199
010-0005-0000
96
031-0048-0001
93, 96, 130
032-0032-0001
103, 104, 132
1589071
199
010-0007-0000
100, 104,105
031-0049-0001
99, 102
032-0033-0001
93, 94, 129
1589072
201
010-0007-0009
101
031-0050-0001
93, 97
032-0034-0001
130
1589448
208
010-0008-0000
104
031-0051-0001
93, 97
032-0042-0001
99, 100
1589451
210
010-0016-0000
95, 101,104
031-0052-0001
93, 98
032-0055-0001
99, 100, 131
1589452
210
010-0017-0000
95, 101,104
031-0053-0001
99, 101, 131
032-0056-0001
99, 100, 131
1589453
211
010-0031-0000
106
031-0054-0001
99, 101, 131
032-0058-0001
99, 100, 131
1589454
211
010-0035-000
94
031-0057-0001
103,105
032-0059-0001
99, 101, 131
1589455
142
010-0036-0000
100,101,104
031-0058-0001
103,105
032-0060-0001
99, 100, 131
1589457
142
010-0044-000
94
031-0059-0001
93, 97
032-0061-0001
99, 100, 131
1589460
150
010-0065-0000
116
031-0060-0001
99,102
032-0062-0001
99, 101, 131
1589461
159
010-0072-0000
81
031-0061-0001
93, 97
032-0063-0001
99, 101, 131
1589462
150
010-0075-0000
81
031-0062-0001
93, 97
032-0066-0001
93, 94, 129
1589463
142
010-0081-0000
116, 126
031-0063-0001
99, 101,131
032-0067-0001
93, 94, 129
1589464
153
010-0082-0000
116
031-0064-0001
99, 101,131
032-0068-0001
93, 95, 130
1589465
152
010-0083-0000
116
031-0065-0001
99,102
032-0071-0001
93, 94, 129
1589466
153
010-0087-0000
81
031-0067-0001
93, 98
032-0072-0001 103, 104, 105, 132
1589467
154
010-0132-0000
81, 123
031-0069-0001
93, 97
032-0077-0001
1589470
159
010-0150-0000
123
031-0070-0001
99,102
032-0078-0001
93, 94, 129
1589471
157
010-0161-0000
123
031-0072-0001
93, 97
032-0079-0001
103, 104, 132
1589472
143
010-0169-0000
81
031-0073-0001
93, 98
032-0083-0001
99, 101, 131
1589476
143
010-0172-0000
106
031-0080-0001
93, 98
032-0084-0001
99, 100, 131
1589481
158
010-0186-0000
106
031-0085-0001
103, 105
032-0087-0001
99, 131
1589482
160
010-0190-0000
81
031-0087-0001
100
032-0088-0001
106, 132
1589483
150
010-1004-0000
126
031-0088-0001
93, 96, 130
032-0092-0001
93, 94, 129
1589484
155
010-1008-0000
100, 101
031-0089-0001
93, 96, 130
032-0093-0001
106, 132
1589485
155
010-1009-0000
105
031-0090-0001
93, 96, 130
032-0097-0001
93, 94, 129
1589486
156
010-3002-0000
81
031-0093-0001
99, 101, 131
032-0098-0001
93, 94, 129
1589487
158
010-3007-0000
81
031-0094-0001
99, 101, 131
032-0099-0001
93, 94, 129
Part No.
1579469
Part No.
1589488
99, 100, 131
215
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRONOT and NANONICS Connectors
Part Number Index (Continued)
Part No.
032-0153-0001
Page
93, 95, 130
Part No.
033-0153-0001
Page
111
Part No.
053-0228-0001
Page
135
Part No.
086-0058-0000
Page
63, 80
032-0155-0001
93, 94, 129
051-0049-0001
135
053-0230-0001
107
086-0059-0000
63, 80
032-0156-0001
93, 94, 129
051-0056-0001
135
053-0249-0001
107
086-0060-0000
63, 80
032-0222-0001
93, 94, 129
051-0125-0001
93
053-0250-0001
107
086-0061-0000
63, 80
033-0001-0001
110
051-0134-0001
136
053-0251-0001
107
086-0062-0000
63, 80
033-0023-0001
110
051-0154-0001
136
053-0265-0001
107
086-0063-0000
63, 80
033-0036-0001
110
051-0158-0001
136
053-0267-0003
107
086-0073-00P1
63
033-0042
108
051-0232-0001
135
053-0294-0002
107
086-0073-00W3
72
033-0043
108
051-0248-0001
106
053-0339-0001
111
086-0074-00P1
63
033-0044
108
051-0249-0001
136
053-0354-0003
107
086-0074-00W3
72
033-0046-0001
109
051-0258-0001
99
053-0388-0001
107
086-0075-00P1
63
033-0047-0001
109
051-0258-0001
102
053-0412-0001
135
086-0075-00W3
72
033-0048-0001
109
051-0315-0001
135
053-0455-0001
136
086-0076-00P1
63
033-0053-0001
110
051-0318-0001
93
053-0495-0001
107
086-0076-00P2
72
033-0054-0001
110
051-0325-0001
99, 102
053-0636-0001
136
086-0077-00P1
63
033-0055-0001
110
051-0358-0001
106, 132
053-0656-0001
107
086-0077-00P2
72
033-0056-0001
109
051-0389-0001
106, 132
082-0009-0000
73
086-0078-00P1
63
033-0057-0001
109
051-0450-0001
93
082-0010-0000
73
086-0078-00P2
72
033-0058-0001
109
051-0459-0001
93
082-0113-00T1
63, 73
086-0099-00F5
73
033-0067-0001
109
051-0467-0001
93, 130
082-0132-00T1
63
086-0099-00X1
63
033-0068-0001
109
051-0586-0001
103, 105
082-0462-00Y9
73
086-0100-00F5
73
033-0069-0001
109
051-0618-0001
107
082-0464-00Y9
63, 73
086-0100-00X1
63
033-0081-0001
111
052-0061-0001
99, 100
082-0466-00Y9
79
086-0101-00F5
73
033-0082-0001
111
052-0092-0001
93, 94, 129
083-0009-00R4
63, 73
086-0101-00X1
63
033-0084-0001
109
052-0130-0001
107, 133
083-0158-00R4
63, 73
086-0103-00F5
73
033-0090-0001
111
052-0138-0001
107, 133
083-0173-00R4
63, 78
086-0103-00X1
63
033-0092-0001
111
052-0200-0001
93, 94, 129
083-1200-00R4
73
086-0104-00F5
73
033-0093-0001
111
052-0204-0001
93, 95, 130
084-0024-00T2
63
086-0104-00X1
63
033-0094-0001
111
052-0207-0001
93, 95, 130
084-0025-00T2
63
086-0105-00F5
73
033-0097-0001
111
052-0213-0001
93, 94, 129
084-0026-00T2
63, 79
086-0105-00X1
63
033-0098-0001
111
052-0215-0001
93, 95, 130
084-0027-00T2
63
086-0139-00W3
72
033-0101-0001
110
052-0228-0001 103, 104, 105, 132
084-0028-00T2
63
086-0140-00P2
72
033-0102-0001
110
052-0229-0001
106, 132
084-0029-00T2
63
086-0142-00F5
73
033-0103-0001
110
052-0235-0001
93, 94, 129
086-0001-0000
63, 80
086-0143-00F5
73
033-0104-0001
110
052-0235-0003
93, 94, 129
086-0009-0000
80
086-0146-00AL
72
033-0105-0001
110
052-0298-0001
93, 95, 130
086-0010-0000
80
086-0147-00L6
72
033-0106-0001
110
052-0299-0001
93, 95, 130
086-0014-0000
63, 80
086-0148-0000
73, 80
033-0107-0001
110
052-0304-0022
93, 95, 130
086-0015-0000
63, 80
086-0175-00F3
73
033-0109-0001
110
052-0324-0001
106, 132
086-0049-00AL
72
086-0175-00N1
77
033-0110-0001
110
052-0337-0001
93, 95, 130
086-0049-00J2
63
086-0176-00F3
73
033-0111-0001
110
052-0370-0001
93, 94, 129
086-0050-00AL
72
086-0176-00N1
77
033-0112-0001
110
052-0379-0001
93, 95, 130
086-0050-00J2
63
086-0177-00F3
73
033-0115-0002
107
052-0471-0001
99, 100
086-0051-00AL
72
086-0177-00N1
77
033-0116-0001
107
052-0542-0001
93, 94, 129
086-0051-00J2
63
086-0178-00F3
73
033-0117-0001
107
052-0593-0001
107, 133
086-0052-00J2
63
086-0178-00N1
77
033-0124-0001
111
053-0020-0003
107
086-0052-00L6
72
086-0179-00F3
73
033-0125-0001
111
053-0021-0003
107
086-0053-00J2
63
086-0179-00N1
77
033-0126-0001
111
053-0022-0003
107
086-0053-00L6
72
086-0180-00F3
73
033-0127-0001
110
053-0028-0001
135
086-0054-00J2
63
086-0180-00N1
77
033-0129-0001
110
053-0108-0001
110
086-0054-00L6
72
086-0181-00F3
73
033-0141-0001
111
053-0154-0001
107
086-0055-0000
63, 73
086-0181-00N1
77
033-0143-0001
111
053-0155-0001
107
086-0056-0000
63, 73
086-0182-00F3
73
033-0145-0001
111
053-0161-0001
107
086-0056-0000
80
086-0182-00N1
77
033-0147-0001
109
053-0227-0001
135
086-0057-0000
63, 80
086-0251-0000
80
216
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRONOT and NANONICS Connectors
Part Number Index (Continued)
086-0253-00P2
77
Part No.
131-0202-0002
Page
116
Part No.
132-0303-0002
Page
114, 133
Part No.
143-0030-0001
Page
125
086-0254-00P2
77
131-0300-0001
115, 134
132-0509-0002
113, 133
143-0031-0000
125
086-0255-00P2
77
131-0301-0001
115, 134
141-0000-0001
118
143-0032-0001
124
086-0256-00P2
77
131-0303-0002
116
141-0001-0001
118
143-1000-0001
124
086-0257-00L6
77
131-0304-0001
116
141-0002-0001
118
143-1001-0001
125
086-0258-00L6
77
131-0705-0001
116
141-0002-0002
118
143-1002-0001
125
086-0259-00L6
77
131-0904-0001
116
141-0003-0001
118
143-1003-0001
125
086-0260-00L6
77
132-0112-000
133
141-0003-0002
118
144-0001-0001
126
086-0261-00F5
77
132-0112-0001
113
141-0004-0001
119
145-0002-0001
126
086-0262-00F5
77
132-0112-0002
113
141-0010-0001
119
145-0003-0001
126
086-0263-00F5
77
132-0112-0003
113
141-0011-0001
121
1466018-1
15
086-0264-00F5
77
132-0112-0004
113
141-0011-0002
121
1495164-1
15
086-0265-00L6
77
132-0113-000
133
141-0012-0001
121
3-1532030-3
78
086-0266-00L6
77
132-0113-0001
113
141-0012-0002
121
3-1532030-4
78
086-0267-00L6
77
132-0113-0002
113
141-0013-0001
119
4-1532036-8
78
086-0268-00L6
77
132-0113-0003
113
141-0014-0001
121
4-1532137-3
15
086-0330-0000
86
132-0113-0004
113
141-0015-0001
121
5-1532030-6
78
086-0331-0000
86
132-0114-000
133
141-0017-0001
121
5-1532030-7
79
086-0337-00N1
85
132-0114-0001
113
141-0019-0001
119
5-1532129-7
79
086-0338-00N1
85
132-0114-0002
113
141-0020-0001
121
5-1532129-8
79
086-0339-00N1
85
132-0114-0003
113
141-0023-0001
121, 123
5-1532129-9
79
086-0340-00N1
85
132-0114-0004
113
141-1000-0001
122
5-1532137-5
14
086-0341-00N1
85
132-0115-000
133
141-1001-0001
122
5-1532137-6
14
086-0342-00N1
85
132-0115-0001
113
141-1001-0001
123
5-1532137-7
14
086-0343-00N1
85
132-0115-0002
113
141-1002-0001
122
5-1532137-8
14
086-0344-00N1
85
132-0115-0003
113
141-1002-0002
122
5-1532137-9
14
096-0001-0000
15
132-0115-0004
113
141-1003-0001
123
5-1532155-0
79
096-0002-0008
15
132-0116-0002
114, 133
141-1003-0002
123
5-1532168-1
79
096-0002-0009
14
132-0117-0002
114, 133
141-1004-0001
123
6-1532030-1
78
096-0002-0010
14
132-0118-0002
114, 133
141-1005-0001
123
6-1532137-0
14
096-0002-0011
14
132-0119-0002
114, 133
141-1012-0001
123
6-1532137-1
14
096-0002-0013
15
132-0200-000
133
141-1500-0001
63, 79
6-1532137-2
14
096-0002-0014
14
132-0200-0001
113
142-0000-0001
118
6-1532137-3
14
096-0002-0015
14
132-0200-0002
113
142-0000-0002
118
6-1532137-4
14
096-0002-0060
14
132-0200-0003
113
142-0000-0003
118
7-1532037-3
78
096-0002-0061
14
132-0200-0004
113
142-0002-0001
118
8-1532030-1
78
096-0002-0062
14
132-0201-000
133
142-0002-0002
118
A43
59
096-0002-0064
14
132-0201-0001
113
142-0002-0003
118
B43
59
096-0002-0065
14
132-0201-0002
113
142-0005-0001
120
C43
59
096-0526-0000
86
132-0201-0003
113
142-0005-0002
120
Circular Connectors
096-0626-0001
86
132-0201-0004
113
142-0005-0003
120
Coax Only Wire Terminations 200
131-0134-0001
115, 134
132-0202-0002
114, 133
142-0010-0001
120
Coax SMT Termination
202
131-0135-0001
115, 134
132-0203-0002
114, 133
142-0010-0002
120
Coax w/Mixed Signal
204
131-0136-0001
115, 134
132-0300-000
133
142-0010-0003
120
131-0137-0001
115, 134
132-0300-0001
114
142-1000-0001
122
DUALOBE Jumper
Terminations
149
DUALOBE Panel Mount
Connectors
169
Part No.
Page
194
131-0138-0002
116
132-0300-0002
114
142-1002-0001
122
131-0139-0002
116
132-0300-0003
114
142-1021-0001
122
131-0140-0001
116
132-0300-0004
114
142-1500-0001
63, 79
131-0141-0002
116
132-0301-000
133
143-0001-0001
124
131-0142-0002
116
132-0301-0001
114
143-0002-0001
124
DUALOBE Solder Cup
Termination
131-0150-0001
115
132-0301-0002
114
143-0003-0001
124
DUALOBE Wire Terminations 144
131-0151-0001
115
132-0301-0003
114
143-0004-0001
125
131-0200-0001
115, 134
132-0301-0004
114
143-0005-0001
119
Flex Termination Duckbill
Connectors
124
HDSM
131-0201-0001
115, 134
132-0302-0002
114, 133
143-0029-0001
DUALOBE SMT & Thru-Hole
Terminations
161
166
163
54
217
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRONOT and NANONICS Connectors
Part Number Index (Continued)
Part No.
MCD
Page
7
MCD**-
11, 12
MCDM
25
MCDM1
26
MCDM3
28
MCDR3
32, 33, 34
MCE
41
MCEM
42
MCEM1
MCJ
MCJM
MCK
44
46, 47
48, 49
7, 16, 19
MCK-** 9, 17, 20, 23, 31, 32, 34, 35
MCS
MD53
MD53-00E
50
67, 68
70
MD53-01E
70
MD53-02E
71
MD53-06E
69
MD53-12E
71
MD53-16E
69
MD63-*
75
MD63-00E
76
MD63-01E
76
MD63-02E
76
MD73-*
83
MD73-00E
84
MD73-01E
85
MD73-02E
84
MD73-06E
84
MQR-*
87
MTC-*
89
S96-0002-0009
14
S96-0002-0060
14
S96-0002-0084
14
S96-0002-0085
14
S96-0002-0086
14
S96-0002-0087
14
S96-0002-0088
14
S96-0002-0089
14
S96-0002-0090
14
S96-0002-0091
14
Strip Connectors
209
Strip Connectors, SMT &
ThruHole
212
T53-*
72
218
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRONOT and NANONICS Connectors
Engineering Notes
219
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
MICRONOT and NANONICS Connectors
Engineering Notes
220
Catalog 1308638
Revised 8-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Global Contacts
Americas
Argentina – Buenos Aires
Phone:
+54-11-4733-2200
Fax:
+54-11-4733-2211
Brasil – São Paulo
Phone:
+55-11-3611-1311
Fax:
+55-11-3611-0397
Canada – Markham
Phone:
+905-475-6222
Fax:
+905-474-5520
Product Information Center:
(Technical Support)
Phone:
+905-470-4425
Fax:
+905-474-5525
Colombia – Bogota
Phone:
+57-1-231-9398
Fax:
+57-1-660-0206
Mexico – Mexico City
Phone:
+52-5-729-0400
Fax:
+52-5-361-8545
For Latin/South American
Countries not shown
Phone:
+54-11-4733-2015
Fax:
+54-11-4733-2083
United States – Harrisburg, PA
Phone:
+717-564-0100
Fax:
+717-986-7575
Product Information Center:
(Technical Support)
Phone:
+800-522-6752
Fax:
+717-986-7575
Asia/ Pacific
Australia – Sydney
Phone:
+61-2-9554-2600
Fax:
+61-2-9502-2556
Product Information Center:
(Technical Support)
Phone:
+61-2-9840-8200
Fax:
+61-2-9634-6188
India – Bangalore
Phone:
+91-80-285-40800
Fax:
+91-80-285-40820
Indonesia – Jakarta
Phone:
+65-6482-0311
Fax:
+65-6482-1012
Japan – Toyko
Phone:
+81-44-844-8111
Fax:
+81-44-812-3207
Product Information Center:
(Technical Support)
Phone:
+81-44-844-8013
Fax:
+81-44-812-3200
Raychem Products
+81-44-900-5102
Phone:
Fax:
+81-44-5025-5027
Korea – Seoul
Phone:
+82-2-3415-4500
Fax:
+82-2-3486-3810
Malaysia – Kuala Lumpur
Phone:
+60-3-78053055
Fax:
+60-3-78053066
New Zealand – Auckland
Phone:
+64-9-634-4580
Fax:
+64-9-634-4586
Philippines – Makati City
Phone:
+632-848-0171
Fax:
+632-867-8661
People’s Republic of China
Hong Kong
Phone:
+852-2735-1628
Fax:
+852-2735-0243
Shanghai
Phone:
Fax:
+86-21-53838188/64850602
+86-21-53838018/54260180
Shunde
Phone:
Fax:
+86-765-775-1368
+86-765-775-2823
Europe/ Middle East/Africa
Austria – Vienna
Phone:
+43-190-560-0
Fax:
+43-190-560-1333
Belgium – Kessel-Lo
Phone:
+32-16-35-23-00
Fax:
+32-16-35-23-52
Germany – Bensheim
Phone:
+49-6251-133-0
Fax:
+49-6251-133-1600
Product Information Center:
(Technical Support)
Phone:
+49-6251-133-1999
Fax:
+49-6251-133-1988
Bulgaria – Sofia
Phone:
+359-2-971-2152
Fax:
+359-2-971-2153
Germany – Langen
Phone:
+49-6103-709-0
Fax:
+49-6103-709-1223
Czech Republic – Kurim
Phone:
+420-5-41-162-111
Fax:
+420-5-41-162-223
Germany – Speyer
Phone:
+49-6232-30-0
Fax:
+49-6232-30-2243
Denmark – Viby J
+45-70-15-52-00
Phone:
Fax:
+45-43-44-14-14
Germany
HTS Division – Neunkirchen
Phone:
+49-2247-305-0
Fax:
+49-2247-305-122
Egypt – Cairo
Phone:
+20-2-417-76-47
+20-2-419-23-34
Fax:
Estonia – Tallinn
Phone:
+372-65-05-474
+372-65-05-470
Fax:
Finland – Helsinki
Phone:
+358-95-12-34-20
Fax:
+358-95-12-34-250
France –
Cergy-Pontoise
Phone:
+33-1-3420-8888
Fax:
+33-1-3420-8600
Product Information Center:
(Technical Support)
Phone:
+33-1-3420-8943
+33-1-3420-8623
Fax:
France
Tyco Electronics Export –
St Ouen L’Aumone
Phone:
+33-1-3440-7200
Fax:
+33-1-3440-7220 or
+33-1-3440-7230
1308638–10M–GIC–CGX–8-05
Great Britain –
Stanmore Middlesex
Phone:
+44-208-954-2356
Fax:
+44-208-954-6234
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone:
+44-141 810 8968
+44-141 810 8971
Fax:
Great Britain – Dorcan, Swindon
Raychem Products
Phone:
+44-1793-528171
Fax:
+44-1793-572516
Greece – Athens
Phone:
+30-1-9370-396/397
Fax:
+30-1-9370-655
Hungary – Budapest
Phone:
+36-1-289-1000
+36-1-289-1010
Fax:
Ireland – Dublin
+353-1-820-3000
Phone:
Fax:
+353-1-820-9790
Italy – Collegno (Torino)
Phone:
+39-011-4012-111
Fax:
+39-011-4031-116
Lithuania – Vilnius
Phone:
+370-5-2131-402
Fax:
+370-5-2131-403
Netherlands – ’s-Hertogenbosch
Phone:
+31-73-624-6246
+31-73-621-2365
Fax:
Product Information Center:
(Technical Support)
Phone:
+31-73-6246-999
Fax:
+31-73-6246-998
Norway – Nesbru
Phone:
+47-66-77-8899
Fax:
+47-66-77-8855
Poland – Warsaw
Phone:
+48-22-45-76-700
Fax:
+48-22-45-76-720
Romania – Bucharest
+40-1-311-3479/3596
Phone:
Fax:
+40-1-312-0574
Spain – Barcelona
Phone:
+34-93-291-0330
Fax:
+34-93-201-7879
Product Information Center:
(Technical Support):
Phone:
+34-93-291-0330
Fax:
+34-93-200-3779
Sweden – Upplands Väsby
Phone:
+46-8-50-72-50-00
Fax:
+46-8-50-72-50-01
Switzerland – Steinach
+41-71-447-0447
Phone:
Fax:
+41-71-447-0444
Turkey – Istanbul
Phone:
+90-212-281-8181/2/3
Fax:
+90-212-281-8184
Ukraine – Kiev
Phone:
+38-044-238-6908
+38-044-568-5740
Fax:
Russia – Moscow
Phone:
+7-095-926-5506/07/08/09
Fax:
+7-095-926-5505
Russia – St. Petersburg
Phone:
+7-812-118-8192
Fax:
+7-812-118-8193
Slovakia – Banská Bystrica
Phone:
+421-48-415-20-11/12
+421-48-415-20-13
Fax:
Slovenia – Ljubljana
Phone:
+386-1561-3270
+386-1561-3240
Fax:
South Africa – Port Elizabeth
Phone:
+27-41-405-4500
+27-41-486-1314
Fax:
Israel – Yokneam
+972-4-959-0508
Phone:
Fax:
+972-4-959-0506
Tyco Electronics Corporation
www.tycoelectronics.com
MICRODOT and
NANONICS Connectors
MICRODOT and NANONICS Connectors
Tyco Electronics Corporation
Harrisburg, Pennsylvania
www.tycoelectronics.com
1308638 10M GIC CGX 8-05
工商网监
湘ICP备2023018690号
