MBMMD-SCSMS0-06-20-1-C-H

RECTANGULAR BACKSHELLS AND ACCESSORIES VERSATILE PRODUCT OFFERING FOR RACK AND PANEL CONNECTORS D-Subminiature: MIL-DTL-24308 Micro-D: MIL-DTL-83513 AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES Table of Contents Introduction 3 Selecting Your Rectangular Backshell 4 Calculating Wire Bundle Diameters 5 Material and Plating Codes 6 D-Subminiature Backshells 7 MBDSM Series – Micro Band Termination 7 Single Body, Flange Mount 7 Split Body, Flange Mount 11 Sliding Body, Flange Mount 14 Split Body, Shrouded 16 MPDSM Series – Micro Band Termination with Tie Post 19 Single Body, Flange Mount with Tie Post 19 Split Body, Flange Mount with Tie Post 23 Sliding Body, Flange Mount with Tie Post 26 Split Body, Shrouded with Tie Post 28 Accessories 31 Hardware Options 31 Protection Cap Assembly 32 Micro-D Backshells 33 MBMMD Series – Micro Band Termination 33 Single Body, Flange Mount 33 Split Body, Flange Mount 36 Split Body, Shrouded 38 MPMMD Series – Micro Band Termination with Tie Post 40 Single Body, Flange Mount with Tie Post 40 Split Body, Flange Mount with Tie Post 43 Split Body, Shrouded with Tie Post 45 Accessories 47 Hardware Options 47 Receptacle Protection Cover 48 AS85049/128 Band Straps 49 Glossary of Terms 50 AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 2 Rectangular Backshells and Accessories For High-Performance Sealing and Strain Relief, the Ideal Mate for a Connector in a Wiring Application, is a TE Backshell TE Connectivity (TE) supplies a comprehensive range of rectangular POLAMCO backshells and accessories that can assist in providing effective strain relief, environmental sealing, and electromagnetic interference (EMI)/ radio frequency interference (RFI) shielding, helping you meet today’s challenges in demanding environments, across many market sectors, including Defense and Space. VERSATILE PRODUCT OFFERING • Compatible with many shell sizes and plating finishes • Wide variety of customizable options within the standard ranges to suit specific requirements HIGH RELIABILITY • Provides strain-relief and cable support to help prevent bending or overflexing • Individual or overall screening against EMI/RFI interference • Protection towards the effectiveness of the cable and sealing against water and dirt ingress EASY INSTALLATION Rugged Designs that Save Weight When it comes to taming harsh environments, TE offers a broad array of shell styles, materials, and finishes to help meet the requirements of a program. • Thin flange shells offer the lowest weight vs. a standard flange • Split solutions and various hardware options allow for easy installation • Sliding lids and blanking cans enable easy cable repair These highly durable rectangular backshells are time tested for reliability in some of the toughest environments Solve Tough Application Challenges with TE We work closely with customers to help meet their most demanding requirements for some of the world’s toughest applications. Whether for ground defense, military aerospace, marine, or deep space applications, TE designs and manufactures rectangular backshells and accessories to be ruggedly reliable, easy to install, lighter, and with more options. Various materials and configurations help maximize performance, reliability, and efficiency. • Simple and fast termination solutions with various hardware options • Two-part components allow uncoupling for repairs AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 3 Rectangular Backshells and Accessories Selecting Your Rectangular Backshell TE offers an extensive standard range of backshell styles to suit a wide variety of applications and requirements. These ranges can be extensively customized using an array of plating options, materials and modification codes. Connector Type Rectangular backshell series align with specific rack and panel connector series. • D-Subminitature backshells mate with MIL-DTL-24308 and ESCC3401/002 • Micro Miniature backshells mate with MIL-DTL-83513 If a connector part number is available, your TE support representative can use it to narrow your scope of options. Entry Sizes Entry size is the diameter of the hole through which the cable enters into the adapter. When selecting the backshell cable entry sizes, it is a good idea to err on the side of too large as an undersized cable can always be enlarged with tape or a grommet to fit the cable clamp. Where it is not possible to physically measure the wire bundle diameter it can be calculated from the individual wire diameters. Contact TE on detailed guide for calculating the wire bundle diameter using page 5. Application Environment A complete description of the backshell’s intended use is recommended. We offer a wide variety of hardware and accessories to meet the most demanding requirements of the world’s toughest applications, such as shipboard, space, aerospace, and land artillery vehicles. Part Attributes Use the series’ catalog pages or product drawings to define attributes to develop a specific part number. Page 6 summarizes material and plating options. Performance Requirement Supporting a range of termination options, TE backshells give a reliable solution for strain relief or screen termination. The customer must consider what their preferences, testing requirements, and level of repairability needed. Modifications Other options (such as extended length, part marking, etc) are available and are defined by standard modification codes. Alongside the standard ranges TE also offers custom solutions to fit more exact requirements. Contact TE to find out more. AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 4 Rectangular Backshells and Accessories Calculating Wire Bundle Diameters Where it is not possible to physically measure the wire bundle diameter it can be estimated from the individual wire diameters using the following calculation. When selecting the backshell cable entry size from provided tables, it is a good idea to err on the side of too large, as an undersized cable can always be enlarged with tape or a grommet to fit the cable clamp. When calculating wire bundle diameters, note that the gauge # of the wire describes only the diameter of the metal conductor, and not the overall diameter including insulation and/or braids. Refer to the appropriate wire specification for the actual diameter of the wire for use in the following calculations. Steps: 1. Determine each type of wire diameter 2. Choose the multiplication factor from table 1 below 3. Calculate the bundle diameter using the following formula: (Bundle Diameter) = Factor x Where n1 x d12 + n22 + d22 + n3 x d32 + ... + nn x dn2 d1 ... dn are diameters of each type of wire in the bundle (when using wires from different diameters) n1 ... nn the quantity of wires with the same diameter Factor is chosen in according to the total number of wires in the bundle (TABLE I) 4. Add thickness of any shielding or jacketing to core wire bundle diameter. (Final OD) = (Bundle Diameter) + 2 x (Shield Thickness) + 2 x (Jacket Thickness) Table 1 MULTIPLICATION FACTORS NO OF WIRES 1 2 3 4 5 6 7 AND MORE FACTOR 1 1.415 1.242 1.205 1.208 1.225 1.15 AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 5 Rectangular Backshells and Accessories Material and Plating Codes MATERIAL DESCRIPTION 1 ALUMINIUM ALLOY 2 NICKEL ALUMINIUM BRONZE (MARINE APPLICATIONS) 4 STAINLESS STEEL 303 46 6 74 STAINLESS STEEL 316 (MARINE APPLICATIONS) STAINLESS STEEL NUT / ALUMINIUM BODY PEI (30% GLASS FILLED HIGH TEMPERATURE COMPOSITE) Refer to TE material specification DM0076 PLATING DESCRIPTION ROHS ENVIRONMENTAL CONDUCTIVITY COMPLIANT PROTECTION B CADMIUM, OLIVE DRAB OVER ELECTROLESS NICKEL NO CONDUCTIVE 500 HRS C ELECTROLESS NICKEL YES CONDUCTIVE 48 HRS 500 HRS MATERIAL CODE 4 - 500 HRS MATERIAL CODE 46 - 1000 HRS D BLACK ANODISE YES NON CONDUCTIVE J PASSIVATE (STAINLESS STEEL ONLY) YES — TN PTFE OVER HIGH PHOSPHORUS ELECTROLESS NICKEL YES CONDUCTIVE 500 HRS U UNPLATED CLEAN FINISH NOT SHOT BLASTED YES — NOT TESTED Z SHOT BLAST FOR NON-REFLECTIVE FINISH (NICKEL ALUMINIUM BRONZE ONLY) YES CONDUCTIVE 1000 HRS ZB ZINC COBALT OVER ELECTROLESS NICKEL WITH AN OLIVE DRAB CHROMATE CONVERSION YES CONDUCTIVE 500 HRS ZK ZINC COBALT OVER ELECTROLESS NICKEL WITH A BLACK CHROMATE CONVERSION YES CONDUCTIVE 350 HRS ZN ZINC NICKEL BLACK PASSIVATE OVER ELECTROLESS NICKEL YES CONDUCTIVE 500 HRS These lists are not exhaustive – contact TE for further information AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 6 D-Subminiature MBDSM Series – Micro Band Termination MBDSM For MIL-DTL-24308 Connectors Single Body, Flange Mount Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements With or without heat shrink boot groove Bands ordered separately from TE – see page 49 Accessories SPECIFICATION • Mates to: MIL-DTL-24308 and ESCC3401/002 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band Position EntryEntry Position Entry Position 8. Main Body Main Body Height in mm Height in mm Main Body Height in mm 8. Main Body Main Body Height in mm 8.20 Height in mm 8.20 8.20 Main Body Height in mm – 90° End Entry E – 90°EEnd Entry E – 90° End Entry 8.20 8.20 – 45° Side Entry J – 45°JSide Entry J – 45° Side Entry 8. 20 8. 20 8. 20 Main Body Main Body Height in mm Height in mm Main Body Height in mm Main Body Main Body Height in mm Height in mm 8.20 Main Body Height in mm 8. 2 20 0 – 45° End Entry F – 45°FEnd Entry F – 45° End Entry 20 – Top Entry U – TopUEntry U – Top Entry Main Body Main Body Height in mm Height in mm Main Body Height in mm – 90° Side Entry S – 90°SSide Entry 8.20 8.20 S – 90° Side Entry 8.20 AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES MPDSM • • • • PAGE 7 D-Subminiature MBDSM Series – Micro Band Termination EXAMPLE MBDSM - U 3 S H S 0 - 06 - 30 - 1 - C - S HARDWARE OPTION (See Page 31) O, S, H, E, F MPDSM TERMINATION SERIES PLATING (See Page 6) MATERIAL (See Page 6) MAIN BODY HEIGHT Increments of 5 mm SHELL SIZE 1, 2, 3, 4, 5, 6 Flange Code: S (Standard) ENTRY SIZE FlangeCode: Code:0S (No (Standard) Grounding Grounding) 02 - 18 Grounding Code: 0 (No Grounding) Flange Code: T (Thin Flange) Flange Code: Flange) Grounding Code:T0(Thin (No Grounding) Grounding Code: 0 (No Grounding) BB 2.00 0.80 0.80 Flange Code: R (Standard, Tab Recess) Grounding Code: 0 (No Grounding) E C A C A E E C C A A C C A A B B 2.00 BB FLANGE STYLE T Thin Flange S Standard Flange R Standard Flange with Tab Recess 2.00 2.00 INTERFACE VARIANT H Handed M Mirrored Flange Code: S (Standard) Grounding Code: 0 (No Grounding) GROUNDING OPTION 0 No Grounding 1 1 Off Comb 2 2 Off Combs 2.00 2.00 SHELL STYLE S Single Piece Body Flange Code: R (Standard, Tab R Flange Code:Code: R (Standard, Tab R Grounding 0 (No Ground Grounding Code: 0 (No Ground BB Accessories ENTRY POSITION (See Page 7) U Top Entry F End 45° Entry E End 90° Entry J Side 45° Entry S Side 90° Entry DD MBDSM For MIL-DTL-24308 Connectors C C A A 0.80 Flange Code: T (Thin Flange) Grounding Code: 0 (No Grounding) D B AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 8 D-Subminiature MBDSM Series – Micro Band Termination MBDSM For MIL-DTL-24308 Connectors Flange Code: R (Standard, Tab Recess) 2.00 B B Accessories Grounding Code: 1 (1 Off Comb) MPDSM 2.00 Flange Code: S (Standard) C A E C A B B Grounding Code: 2 (2 Off Combs) C A E C A 0.80 Flange Code: T (Thin Flange) B B D Grounding Code: 2 (2 Off Combs) D Grounding Code: 1 (1 Off Comb) C A C A Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately Shell Size 1 2 3 4 5 6 A B C D E 31.14 39.47 53.37 69.71 67.26 69.65 12.93 12.93 12.93 12.93 15.75 17.35 25.00 33.33 47.04 63.50 61.12 63.50 12.20 12.20 12.20 12.20 15.20 16.50 19.86 28.09 41.86 58.32 55.98 58.57 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 9 D-Subminiature For MIL-DTL-24308 Connectors AVAILABLE ENTRY SIZES Shell Size 1 2 3 4 5 6 U – Top Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 F – 45° End Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 11 02 - 06 07 - 14 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18* E – 90° End Entry Circular Elliptical 02 - 06 07 - 13 02 - 06 07 - 13 02 - 06 07 - 13 02 - 06 07 - 13 02 - 08 09 - 13 02 - 09 10 - 13* J – 45° Side Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 S – 90° Side Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 * Maximum entry size not supported within the 60.0 mm maximum main body height when grounding combs are deployed; maximum entry size is limited to 17 (F entry position) and 12 (E entry position) Entry Position Circular Entry Elliptical Entry Y Accessories MPDSM MBDSM MBDSM Series – Micro Band Termination ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Size (Circular) 02 03 04 05 06 07 08 09 Dia Z Min U – Top Entry Minimum Main Body Height in mm F – 45° End Entry Minimum Main Body Height in mm E – 90° End Entry Minimum Main Body Height in mm J – 45° Side Entry Minimum Main Body Height in mm S – 90° Side Entry Minimum Main Body Height in mm Without Comb With Comb(s) Without Comb With Comb(s) Without Comb With Comb(s) Without Comb With Comb(s) 3.18 4.77 6.35 7.93 9.53 11.11 12.70 14.29 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 35.0 25.0 30.0 30.0 30.0 35.0 35.0 35.0 40.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 07 08 09 10 11 12 13 14 15 16 17 18 13.0 16.5 20.5 24.7 29.4 34.6 40.2 46.2 52.7 50.0 49.2 54.9 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12.0 13.9 13.9 E – 90° End Entry J – 45° Side Entry S – 90° Side Entry U – Top Entry F – 45° End Entry Minimum Main Body Minimum Main Body Minimum Main Body Minimum Main Body Minimum Height in mm Height in mm Height in mm Height in mm Main Body Height Without With Without With Without With Without With in mm Comb Comb(s) Comb Comb(s) Comb Comb(s) Comb Comb(s) 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 30.0 30.0 35.0 35.0 40.0 45.0 50.0 50.0 55.0 55.0 55.0 60.0 35.0 35.0 40.0 40.0 45.0 50.0 55.0 55.0 60.0 60.0 60.0 NA 35.0 35.0 40.0 45.0 50.0 55.0 60.0 NA NA NA NA NA 35.0 40.0 45.0 50.0 55.0 60.0 NA NA NA NA NA NA 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 40.0 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 10 D-Subminiature MBDSM Series – Micro Band Termination MBDSM For MIL-DTL-24308 Connectors Split Body, Flange Mount Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements Easy installation over already terminated wires Bands ordered separately from TE – see page 49 Accessories SPECIFICATION • Mates to: MIL-DTL-24308 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band E - 90° End Entry 8. 20 Main Body Height in mm Main Body Height in mm 8.20 F - 45° End Entry 8. 20 Entry Position U - Top Entry J - 45° Side Entry Main Body Height in mm Main Body Height in mm 8.20 S - 90° Side Entry Main Body Height in mm 8.20 Shell Size 1 2 3 4 5 6 U – Top Entry Main Body Height in mm F – 45° End Entry Main E – 90° End Entry Main J – 45° Side Entry Main S – 90° Side Entry Main Body Height in mm Body Height in mm Body Height in mm Body Height in mm Without Comb With Comb(s) Without Comb With Comb(s) 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 40.0 47.0 47.0 47.0 40.0 45.0 45.0 52.0 52.0 52.0 Without Comb With Comb(s) Main Body Height for Entry Position E is Determined by Entry Size – Please See Page 13 Without Comb With Comb(s) Without Comb With Comb(s) 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 40.0 40.0 40.0 40.0 40.0 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES MPDSM • • • • PAGE 11 D-Subminiature Accessories MPDSM MBDSM MBDSM Series – Micro Band Termination For MIL-DTL-24308 Connectors EXAMPLE MBDSM - U 3 T M S - 0 - 06 - 30 - 1 - C S HARDWARE OPTION (See Page 31) O, S, H, E, F, K TERMINATION SERIES ENTRY POSITION (See Page 11) U Top Entry F End 45° Entry E End 90° Entry J Side 45° Entry S Side 90° Entry PLATING (See Page 6) MATERIAL (See Page 6) MAIN BODY HEIGHT (See Page 11) Not a Variable Option SHELL SIZE 1, 2, 3, 4, 5, 6 ENTRY SIZE 02 - 18 SHELL STYLE T Two Piece Body GROUNDING OPTION 0 No Grounding 1 1 Off Comb 2 2 Off Combs INTERFACE VARIANT M Mirrored A C C A A C C A A C C A A C C A A B B A 2.00 2.00 B B D D C C A A D D C C A A C C A A C C A A C C A A C C A A Shell Size A B C D E 1 2 3 4 5 6 31.14 39.47 53.37 69.71 67.26 69.65 12.93 12.93 12.93 12.93 15.75 17.35 25.00 33.33 47.04 63.50 61.12 63.50 12.20 12.20 12.20 12.20 15.20 16.50 19.86 28.09 41.86 58.32 55.98 58.57 B B 2.00 2.00 B B 2.00 2.00 C C A B B B B Grounding Grounding Code: Code: 2 2 Grounding Grounding (2 Off (2Combs) Off Code: Code: 2Combs) 2 (2 Off (2 Combs) Off Combs) Flange Flange Code: Code: R (Standard, R (Standard, Tab Recess) Tab Recess) Flange Flange Code: Code: R (Standard, R (Standard, Tab Recess) Tab Recess) B B B B Grounding Grounding Code: Code: 1 1 Grounding Grounding (1 Off (1Comb) Off Code: Code: 1 Comb) 1 (1 Off (1 Comb) Off Comb) C C A B B B B Grounding Grounding Code: Code: 0 0 Grounding Grounding (No Combs) (No Combs) Code: Code: 0 0 (No (No Combs) Combs) B B 2.00 2.00 Flange Flange Code: Code: S (Standard) S (Standard) Flange Flange Code: Code: S (Standard) S (Standard) B B FLANGE STYLE S Standard Flange R Standard Flange with Tab Recess Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately Measurements shown in mm Grounding Combs Shown for Illustrative Purposes – Combs are Sold Separately Grounding Combs Shown for Illustrative Purposes OnlyOnly – Combs are Sold Separately Grounding Grounding Combs Combs Shown Shown for Illustrative for Illustrative Purposes Purposes OnlyOnly – Combs – Combs are Sold are Sold Separately Separately AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 12 D-Subminiature MBDSM Series – Micro Band Termination MBDSM For MIL-DTL-24308 Connectors AVAILABLE ENTRY SIZES F – 45° End Entry Circular Elliptical 02 - 06 07 02 - 06 07 - 08 02 - 06 07 - 09 02 - 06 07 - 11 02 - 08 09 - 12 02 - 09 10 - 12 E – 90° End Entry Circular Elliptical 02 - 06 07 - 10 02 - 06 07 - 10 02 - 06 07 - 10 02 - 06 07 - 10 02 - 08 09 - 10 02 - 09 10 J – 45° Side Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 S – 90° Side Entry Circular Elliptical 02 - 06 — 02 - 06 07 02 - 06 07 - 10 02 - 06 07 - 13 02 - 08 09 - 13 02 - 09 10 - 13 Entry Position Circular Entry Y Elliptical Entry ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Size (Circular) Dia Z Min 02 03 04 05 06 07 08 09 3.18 4.77 6.35 7.93 9.53 11.11 12.70 14.29 U – Top Entry Main Body Height in mm Without Comb With Comb(s) Main Body Height for Entry Position U is Determined by Shell Size – Please See Page 11 F – 45° End Entry Main Body Height in mm Without Comb With Comb(s) Main Body Height for Entry Position F is Determined by Shell Size – Please See Page 11 E – 90° End Entry Main Body Height in mm Without Comb With Comb(s) 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 J – 45° Side Entry Main Body Height in mm S – 90° Side Entry Main Body Height in mm Without Comb Without Comb With Comb(s) Main Body Height for Entry Position J is Determined by Shell Size – Please See Page 11 With Comb(s) Main Body Height for Entry Position S is Determined by Shell Size – Please See Page 11 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 07 08 09 10 11 12 13 14 15 16 17 18 13.0 16.5 20.5 24.7 29.4 34.6 40.2 46.2 52.7 50.0 49.2 54.9 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12.0 13.9 13.9 U – Top Entry Main Body Height in mm F – 45° End Entry Main Body Height in mm Without With Without With Comb Comb(s) Comb Comb(s) Main Body Height for Entry Position U is Determined by Shell Size – Please See Page 11 Main Body Height for Entry Position F is Determined by Shell Size – Please See Page 11 E – 90° End Entry Main Body Height in mm Without Comb With Comb(s) 36.0 40.0 44.0 48.0 NA NA NA NA NA NA NA NA 41.0 45.0 49.0 53.0 NA NA NA NA NA NA NA NA J – 45° Side Entry S – 90° Side Entry Main Body Main Body Height in mm Height in mm Without With Without With Comb Comb(s) Comb Comb(s) Main Body Height for Entry Position J is Determined by Shell Size – Please See Page 11 Main Body Height for Entry Position S is Determined by Shell Size – Please See Page 11 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 13 Accessories 1 2 3 4 5 6 U – Top Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 MPDSM Shell Size D-Subminiature MBDSM Series – Micro Band Termination MBDSM For MIL-DTL-24308 Connectors Sliding Body, Flange Mount • • • • 8.20 U – Top Entry Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements Added benefit of connector retention Bands ordered separately from TE – see page 49 SPECIFICATION • Mates to: MIL-DTL-24308 Main Body Height in mm • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band Entry Position Flange Code: R (Standard, Tab Recess) U – Top Grounding Code: 0 (No Grounding) 8.20 Entry Position Entry Position Entry 8.20 8.20 Main Body Height in mm Flange Code: R (Standard, Tab Recess) Grounding Code: 0 (No Grounding) 2.00 E C A C A E C A E C A D E F 12.93 12.93 12.93 12.93 15.75 17.35 25.00 33.33 47.04 63.50 61.12 63.50 12.20 12.20 12.20 12.20 15.20 16.50 19.86 28.09 41.86 58.32 55.98 58.57 14.73 14.73 14.73 14.73 17.55 19.15 C in mm Measurements shown A AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES D C D 31.14 39.47 53.37 69.71 67.26 69.65 B D Code: T (Thin Flange) Flange Code: T (Thin Flange) Flange Code: T Flange (Thin Flange) Grounding Code: 0 (No Grounding) Grounding Code: 0 (No Grounding) Grounding Code: 0 (No Grounding) F A F F C A F Shell Size 1 2 3 4 5 6 2.00 2.00 F B C A F C A Flange Code: R (Standard, Tab Recess)Tab Recess) Flange Code: R (Standard, Grounding Grounding Code: 0 (No Grounding) Code: 0 (No Grounding) B F 2.00 2.00 F B D F B F 2.00 Flange Code: S (Standard) Flange Code: T (Thin Flange) Flange Code: S (Standard) Code: 0 (No Grounding) Grounding Code: 0 (No Grounding) Grounding Grounding Code: 0 (No Grounding) B Flange Code: S (Standard) Grounding Code: 0 (No Grounding) B E C A C A Main Body Height in mm U – Top Entry U – Top Entry Main Body Height in mm F 2.00 Code: S (Standard) Code: 0 (No Grounding) B Accessories MPDSM Entry Position C A C A PAGE 14 D-Subminiature MBDSM Series – Micro Band Termination EXAMPLE MBDSM - U 3 L H S 0 - 06 - 30 - 1 - C - S HARDWARE OPTION (See Page 31) O, S, H, E, F, K TERMINATION SERIES 2.00 2.00 MAIN BODY HEIGHT Increments of 10 mm ENTRY SIZE 02 - 14 GROUNDING OPTION 0 No Grounding 1 1 Off Comb FF BB EE CC A A Flange Flange Code: Code: S S (Standard) (Standard) Flange Flange Code: Code: SS (Standard) (Standard) 2.00 2.00 2.00 2.00 2.00 ounding Only oundingCombs CombsShown Shownfor forIllustrative IllustrativePurposes Purposes Only––Combs Combsare areSold SoldSeparately Separately C Circular Entry Entry Position A A Flange Code: T (Thin Flange) ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY A X Flange Code: T (Thin Flange) ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY F D DD F FF Entry Dia Z Entry Size X Y Size Min (Elliptical) Min Min (Circular) Grounding Grounding Grounding Grounding Code: Code: 11 3.18 02 07 13.0 9.5 Code: Code: 1 1 (1 (1 Off Off Comb) Comb) 03 4.77 08 16.5 9.5 (1(1 Off Off Comb) Comb) 04 6.35 09 20.5 9.5 C C Grounding CC Code: 1 05 7.93 24.7 9.5 A A 10 AA (1 Off 06 9.53Comb) 11 29.4 9.5 07 Combs 11.11 12 34.6 9.5 are Grounding Combs Shown Shown for for Illustrative Illustrative Purposes Purposes Only –– Combs Combs are Sold Sold Separately Separately C Grounding COnly Grounding Grounding Combs Combs Shown Shown for for Illustrative Illustrative Purposes Purposes Only Only –– Combs Combs are Sold Sold Separately Separately 08 12.70 13 40.2 9.5are A A 09 14.29 14 46.2 9.5 D F C Elliptical Entry Flange Flange Code: Code: T T (Thin (Thin Flange) Flange) Flange Flange Code: Code: TT (Thin (Thin Flange) Flange) ØZ U – Top Entry Shell Size Circular Elliptical 1 02 - 06 NA 2 02 - 06 07 - 08 3 02 - 06 07 - 11 Grounding 4 Code: 02 1- 06 07 - 14 (15 Off 02 Comb) - 08 09 - 13 6 02 - 09 10 - 14 E C C D A E E E EE C C CC A A AA Y C C CC A A AA F B F F FF B BB F FF B BB Grounding Code: 1 (1 Off Comb) F B F DD FF Grounding Grounding Grounding Grounding Code: Code: 11 Code: Code: 1 1 (1 (1 Off Off Comb) Comb) (1(1 Off Off Comb) Comb) CC A A Flange Code: R (Standard, Tab Recess) 2.00 Flange Code: R (Standard, Flange Code: Tab Recess) S (Standard) 2.00 Flange Code: S (Standard) Grounding Code: 1 (1 Off Comb) Flange Flange Code: Code: R R (Standard, (Standard, Tab Tab Recess) Recess) Flange Flange Code: Code: RR (Standard, (Standard, Tab Tab Recess) Recess) 2.00 2.00 2.00 Flange FlangeCode: Code:TT(Thin (ThinFlange) Flange) B FLANGE STYLE) T Thin Flange CC S Standard Flange A A R Standard Flange with Tab Recess B 2.00 2.00 INTERFACE VARIANT H Handed F BB MATERIAL (See Page 6) Accessories SHELL STYLE L Sliding Lid Body Grounding Grounding Code: Code:11 (1 (1Off OffComb) Comb) PLATING (See Page 6) Flange FlangeCode: Code:RR(Standard, (Standard,Tab TabRecess) Recess) SHELL SIZE 1, 2, 3, 4, 5, 6 MPDSM ENTRY POSITION (See Page 14) U Top Entry Flange FlangeCode: Code:SS(Standard) (Standard) MBDSM For MIL-DTL-24308 Connectors Grounding Combs Shown for Illustrative Purposes Only Grounding – CombsCombs are Sold Shown Separately for Illustrative Purposes Only – Combs are Sold Separately Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 15 D-Subminiature For MIL-DTL-24308 Connectors Split Body, Shrouded • • • • MPDSM Overall screen termination by band Flexible design, suitable for retro fit and prototyping Easy installation over already terminated wires Bands ordered separately from TE – see page 49 Accessories SPECIFICATION • Mates to: MIL-DTL-24308 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band 8. 20 Entry Position F – 45° End Entry E – 90° End Entry J – 45° Side Entry Main Body Height in mm R S – 90° Side Entry R 8.20 Main Body Height in mm R Main Body Height in mm 8.20 20 R Main Body Height in mm R Main Body Height in mm 8.20 U – Top Entry 8. MBDSM MBDSM Series – Micro Band Termination RR––Mounting MountingPosition; Position; See 174 SeePage Sheet Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 16 D-Subminiature MBDSM Series – Micro Band Termination EXAMPLE MBDSM - U 3 T S 3 0 - 06 - 30 - 1 - C - S HARDWARE OPTION (See Page 31) O, S, H, E, F, M TERMINATION SERIES MPDSM ENTRY POSITION (See Page 16) U Top Entry F End 45° Entry E End 90° Entry J Side 45° Entry S Side 90° Entry PLATING (See Page 6) MATERIAL (See Page 6) Accessories MAIN BODY HEIGHT Not a Variable Option SHELL SIZE 1, 2, 3, 4, 5, 6 ENTRY SIZE 02 - 17 SHELL STYLE T Two Piece Body GROUNDING OPTION 0 No Grounding INTERFACE VARIANT S Shrouded B MOUNTING CODE 1, 2, 3, 4, 5, 6, 7 Shell Size U – Top Entry Main Body Height in mm F – 45° End Entry Main Body Height in mm E – 90° End Entry Main Body Height in mm J – 45° Side Entry Main Body Height in mm S – 90° Side Entry Main Body Height in mm 1 2 3 4 5 6 30.0 30.0 30.0 30.0 30.0 30.0 40.0 40.0 45.0 50.0 50.0 50.0 Main Body Height for Entry Position E is Determined by Entry Size – Please See Page 18 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 C B A C Shell Size 1 2 3 4 5 6 A 35.0 43.3 57.5 73.3 70.9 73.3 B 16.0 16.0 16.0 16.0 19.0 20.5 C 25.00 33.33 47.04 63.50 61.12 63.50 Mounting Code Receptacle Mounting Position Panel Thickness R 1 2 3 4 5 6 7 Front Mount Rear Mount Rear Mount Rear Mount Rear Mount Rear Mount Rear Mount — 0.79 1.57 2.36 3.18 3.97 4.77 7.74 6.32 5.53 4.74 3.93 3.14 2.34 A R Mounting Code Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES Mounting Code MBDSM For MIL-DTL-24308 Connectors PAGE 17 D-Subminiature For MIL-DTL-24308 Connectors AVAILABLE ENTRY SIZES Shell Size 1 2 3 4 5 6 U – Top Entry Circular Elliptical 02 - 08 NA 02 - 08 09 02 - 08 09 - 12 02 - 08 09 - 14 02 - 09 10 - 14 02 - 10 11 - 17 F – 45° End Entry Circular Elliptical 02 - 08 NA 02 - 08 NA 02 - 08 09 02 - 08 09 - 11 02 - 09 10 - 11 02 - 10 11 E – 90° End Entry Circular Elliptical 02 - 08 09 - 10 02 - 08 09 - 10 02 - 08 09 - 10 02 - 08 09 - 10 02 - 09 10 02 - 10 — J – 45° Side Entry Circular Elliptical 02 - 04 NA 02 - 08 NA 02 - 08 09 - 10 02 - 08 09 - 13 02 - 09 10 - 13 02 - 10 11 - 13 S – 90° Side Entry Circular Elliptical 02 - 04 NA 02 - 08 NA 02 - 08 09 - 10 02 - 08 09 - 13 02 - 09 10 - 13 02 - 10 11 - 13 Entry Position Circular Entry Elliptical Entry Y Accessories MPDSM MBDSM MBDSM Series – Micro Band Termination ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Size (Circular) Dia Z Min 02 03 04 05 06 07 08 09 10 3.18 4.77 6.35 7.93 9.53 11.11 12.70 14.29 15.88 U – Top Entry Main Body Height in mm Main Body Height for Entry Position U is Determined by Shell Size – Please See Page 17 F – 45° End Entry Main Body Height in mm E – 90° End Entry Main Body Height in mm J – 45° Side Entry Main Body Height in mm S – 90° Side Entry Main Body Height in mm Main Body Height for Entry Position F is Determined by Shell Size – Please See Page 17 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 Main Body Height for Entry Position J is Determined by Shell Size – Please See Page 17 Main Body Height for Entry Position S is Determined by Shell Size – Please See Page 17 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 09 10 11 12 13 14 15 16 17 20.5 24.7 29.4 34.6 40.2 46.2 52.7 50.0 49.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12.0 13.9 U – Top Entry Main Body Height in mm Main Body Height for Entry Position U is Determined by Shell Size – See Page 17 F – 45° End Entry E – 90° End Entry J – 45° Side Entry S – 90° Side Entry Main Body Main Body Main Body Main Body Height in mm Height in mm Height in mm Height in mm Main Body Height for Entry Position F is Determined by Shell Size – See Page 17 45.0 45.0 NA NA NA NA NA NA NA Main Body Height for Entry Position J is Determined by Shell Size – Please See Page 17 Main Body Height for Entry Position S is Determined by Shell Size – Please See Page 17 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 18 D-Subminiature MPDSM Series – Micro Band Termination with Tie Post MBDSM For MIL-DTL-24308 Connectors Single Body, Flange Mount with Tie Post Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements Provides strain relief by tying cables in place using post Bands ordered separately from TE – see page 49 MPDSM • • • • SPECIFICATION Accessories • Mates to: MIL-DTL-24308 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band F – 45° End Entry Backshell Height in mm Backshell Height in mm 8. 20 8. 8.20 8.20 U – Top Entry 20 Entry Position E – 90° End Entry J – 45° Side Entry 20 8. 20 Backshell Height in mm 8.20 8.20 Backshell Height in mm 8. 8.20 8.20 Backshell Height in mm S – 90° Side Entry AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 19 D-Subminiature For MIL-DTL-24308 Connectors EXAMPLE MPDSM - U 3 S H S 0 - 06 - 30 - 1 - C - S HARDWARE OPTION (See Page 31) O, S, H, E, F TERMINATION SERIES ENTRY POSITION (See Page 19) U Top Entry F End 45° Entry E End 90° Entry J Side 45° Entry S Side 90° Entry PLATING (See Page 6) MATERIAL (See Page 6) Flange Code: S (Standard) Flange Code: R (Standard, Tab Flange Code: S (Standard) Code: R (Standard, Tab Re Grounding Code: 0 (No Grounding) Flange Grounding Code: 0 (No Grou MAIN BODY HEIGHT Grounding Code: 0 (No Grounding) Grounding Code: 0 (No Groundi ENTRY SIZE 02 - 18 2.00 Increments of 5 mm 2.00 2.00 GROUNDING OPTION 0 No Grounding 1 1 Off Comb 2 2 Off Combs FLANGE STYLE T Thin Flange S Standard Flange R Standard Flange with Tab Recess Flange Code: T (Thin Flange) Flange Code: T (Thin Flange) Grounding Code: 0 (No Grounding) Grounding Code: 0 (No Grounding) D D B B B 0.80 2.00 Flange Code: R (Standard, Tab Recess) Grounding Code: 0 (No Grounding) 2.00 E E C C A A C C A A 0.80 Flange Code: S (Standard) Grounding Code: 0 (No Grounding) B B B INTERFACE VARIANT H Handed M Mirrored B SHELL STYLE S Single Piece Body 2.00 SHELL SIZE 1, 2, 3, 4, 5, 6 B C C A A E C A C A Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately 1 2 3 4 5 6 31.14 39.47 53.37 69.71 67.26 69.65 12.93 12.93 12.93 12.93 15.75 17.35 C D E 25.00 33.33 47.04 63.50 61.12 63.50 12.20 12.20 12.20 12.20 15.20 16.50 19.86 28.09 41.86 58.32 55.98 58.57 D 0.80 Flange Code: T (Thin Flange) Shell A B Grounding Code: Size0 (No Grounding) Measurements shown in mm B Accessories MPDSM MBDSM MPDSM Series – Micro Band Termination with Tie Post AEROSPACE, DEFENSE & MARINE / RECTANGULAR C BACKSHELLS AND ACCESSORIES A PAGE 20 D-Subminiature MPDSM Series – Micro Band Termination with Tie Post Flange Code: R (Standard, Tab Recess) 2.00 B B Accessories Grounding Code: 1 (1 Off Comb) MPDSM 2.00 Flange Code: S (Standard) C A E C A B B Grounding Code: 2 (2 Off Combs) C A E C A 0.80 Flange Code: T (Thin Flange) B B D Grounding Code: 2 (2 Off Combs) D Grounding Code: 1 (1 Off Comb) C A C A Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES MBDSM For MIL-DTL-24308 Connectors PAGE 21 D-Subminiature For MIL-DTL-24308 Connectors AVAILABLE ENTRY SIZES Accessories MPDSM Shell Size 1 2 3 4 5 6 U – Top Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 F – 45° End Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 11 02 - 06 07 - 14 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18* E – 90° End Entry Circular Elliptical 02 - 06 07 - 13 02 - 06 07 - 13 02 - 06 07 - 13 02 - 06 07 - 13 02 - 08 09 - 13 02 - 09 10 - 13* J – 45° Side Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 S – 90° Side Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 * Maximum entry size not supported within the 60.0 mm maximum main body height when grounding combs are deployed; maximum entry size is limited to 17 (F entry position) and 12 (E entry position) Entry Position Circular Entry Elliptical Entry Y MBDSM MPDSM Series – Micro Band Termination with Tie Post ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Size (Circular) 02 03 04 05 06 07 08 09 Dia Z Min U – Top Entry Minimum Main Body Height in mm F – 45° End Entry Minimum Main Body Height in mm E – 90° End Entry Minimum Main Body Height in mm J – 45° Side Entry Minimum Main Body Height in mm S – 90° Side Entry Minimum Main Body Height in mm Without Comb With Comb(s) Without Comb With Comb(s) Without Comb With Comb(s) Without Comb With Comb(s) 3.18 4.77 6.35 7.93 9.53 11.11 12.70 14.29 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 35.0 25.0 30.0 30.0 30.0 35.0 35.0 35.0 40.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 07 08 09 10 11 12 13 14 15 16 17 18 13.0 16.5 20.5 24.7 29.4 34.6 40.2 46.2 52.7 50.0 49.2 54.9 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12.0 13.9 13.9 E – 90° End Entry J – 45° Side Entry S – 90° Side Entry U – Top Entry F – 45° End Entry Minimum Main Body Minimum Main Body Minimum Main Body Minimum Main Body Minimum Height in mm Height in mm Height in mm Height in mm Main Body Height Without With Without With Without With Without With in mm Comb Comb(s) Comb Comb(s) Comb Comb(s) Comb Comb(s) 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 30.0 30.0 35.0 35.0 40.0 45.0 50.0 50.0 55.0 55.0 55.0 60.0 35.0 35.0 40.0 40.0 45.0 50.0 55.0 55.0 60.0 60.0 60.0 NA 35.0 35.0 40.0 45.0 50.0 55.0 60.0 NA NA NA NA NA 35.0 40.0 45.0 50.0 55.0 60.0 NA NA NA NA NA NA 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 40.0 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 22 D-Subminiature MPDSM Series – Micro Band Termination with Tie Post MBDSM For MIL-DTL-24308 Connectors Split Body, Flange Mount with Tie Post Overall screen termination by band Easy installation over already terminated wires Provides strain relief by tying cables in place using post Bands ordered separately from TE – see page 49 MPDSM • • • • SPECIFICATION Accessories • Mates to: MIL-DTL-24308 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band 20 20 Main Body Height in mm 8. Main Body Height in mm 8.20 8.20 F – 45° End Entry 8. 2 0 Entry Position U – Top Entry J – 45° Side Entry 8. Main Body Height in mm Main Body Height in mm 8.20 8.20 20 8. E – 90° End Entry S – 90° Side Entry Main Body Height in mm 8.20 8.20 Shell Size 1 2 3 4 5 6 U – Top Entry Main Body Height in mm F – 45° End Entry Main Body Height in mm Without Comb With Comb(s) Without Comb With Comb(s) 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 40.0 47.0 47.0 47.0 40.0 45.0 45.0 52.0 52.0 52.0 E – 90° End Entry Main Body Height in mm Without Comb With Comb(s) Main Body Height for Entry Position E is Determined by Entry Size – Please See Page 25 J – 45° Side Entry Main S – 90° Side Entry Main Body Height in mm Body Height in mm Without Comb With Comb(s) Without Comb With Comb(s) 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 40.0 40.0 40.0 40.0 40.0 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 23 D-Subminiature For MIL-DTL-24308 Connectors EXAMPLE MPDSM - U 3 T M S 0 - 06 - 30 - 1 - C - S HARDWARE OPTION (See Page 31) O, S, H, E, F, K TERMINATION SERIES ENTRY POSITION (See Page 23) U Top Entry F End 45° Entry E End 90° Entry J Side 45° Entry S Side 90° Entry PLATING (See Page 6) MATERIAL (See Page 6) MAIN BODY HEIGHT (See Page 23) Not a Variable Option SHELL SIZE 1, 2, 3, 4, 5, 6 ENTRY SIZE 02 - 18 SHELL STYLE T Two Piece Body GROUNDING OPTION 0 No Grounding 1 1 Off Comb 2 2 Off Combs INTERFACE VARIANT M Mirrored Shell Size 1 2 3 4 5 6 FLANGE STYLE S Standard Flange R Standard Flange with Tab Recess B C D E 12.93 25.00 12.20 19.86 12.93 33.33 12.20 28.09 12.93 47.04 12.20 41.86 12.93 63.50 12.20 58.32 15.75 61.12 15.20 55.98 17.35 63.50 16.50 58.57 Flange Code: R (Standard, Tab Recess) B B Grounding Code: 0 (No Combs) A 31.14 39.47 53.37 69.71 67.26 69.65 2.00 2.00 Flange Code: S (Standard) C D A C B Grounding Code: 1 (1 Off Comb) B A C A Grounding Code: 2 (2 Off Combs) B C A B Accessories MPDSM MBDSM MPDSM Series – Micro Band Termination with Tie Post C C A A Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately PAGE 24 D-Subminiature MPDSM Series – Micro Band Termination with Tie Post MBDSM For MIL-DTL-24308 Connectors AVAILABLE ENTRY SIZES F – 45° End Entry Circular Elliptical 02 - 06 07 02 - 06 07 - 08 02 - 06 07 - 09 02 - 06 07 - 11 02 - 08 09 - 12 02 - 09 10 - 12 E – 90° End Entry Circular Elliptical 02 - 06 07 - 10 02 - 06 07 - 10 02 - 06 07 - 10 02 - 06 07 - 10 02 - 08 09 - 10 02 - 09 10 J – 45° Side Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 S – 90° Side Entry Circular Elliptical 02 - 06 — 02 - 06 07 02 - 06 07 - 10 02 - 06 07 - 13 02 - 08 09 - 13 02 - 09 10 - 13 Entry Position Circular Entry Y Elliptical Entry ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Size (Circular) Dia Z Min 02 03 04 05 06 07 08 09 3.18 4.77 6.35 7.93 9.53 11.11 12.70 14.29 U – Top Entry Main Body Height in mm Without Comb With Comb(s) Main Body Height for Entry Position U is Determined by Shell Size – Please See Page 23 F – 45° End Entry Main Body Height in mm Without Comb With Comb(s) E – 90° End Entry Main Body Height in mm Without Comb With Comb(s) 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 Main Body Height for Entry Position F is Determined by Shell Size – Please See Page 23 J – 45° Side Entry Main Body Height in mm S – 90° Side Entry Main Body Height in mm Without Comb Without Comb With Comb(s) Main Body Height for Entry Position J is Determined by Shell Size – Please See Page 23 With Comb(s) Main Body Height for Entry Position S is Determined by Shell Size – Please See Page 23 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 07 08 09 10 11 12 13 14 15 16 17 18 13.0 16.5 20.5 24.7 29.4 34.6 40.2 46.2 52.7 50.0 49.2 54.9 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12.0 13.9 13.9 U – Top Entry Main Body Height in mm F – 45° End Entry Main Body Height in mm Without With Without With Comb Comb(s) Comb Comb(s) Main Body Height for Entry Position U is Determined by Shell Size – Please See Page 23 Main Body Height for Entry Position F is Determined by Shell Size – Please See Page 23 E – 90° End Entry Main Body Height in mm J – 45° Side Entry Main Body Height in mm S – 90° Side Entry Main Body Height in mm Without Comb With Comb(s) Without With Without With Comb Comb(s) Comb Comb(s) 36.0 40.0 44.0 48.0 NA NA NA NA NA NA NA NA 41.0 45.0 49.0 53.0 NA NA NA NA NA NA NA NA Main Body Height Main Body Height for Entry Position J for Entry Position S is Determined by is Determined by Shell Size – Please Shell Size – Please See Page 23 See Page 23 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 25 Accessories 1 2 3 4 5 6 U – Top Entry Circular Elliptical 02 - 06 07 - 08 02 - 06 07 - 10 02 - 06 07 - 12 02 - 06 07 - 15 02 - 08 09 - 16 02 - 09 10 - 18 MPDSM Shell Size D-Subminiature MPDSM Series – Micro Band Termination with Tie Post MBDSM For MIL-DTL-24308 Connectors Sliding Body, Flange Mount with Tie Post Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements Provides strain relief by tying cables in place using post ENTRY POSITION Bands ordered separately from TE – see page 49 U - Top Entry SPECIFICATION Accessories • Mates to: MIL-DTL-24308 Main Body Height in mm • Screen Termination: Overall screen 8.20 8.20 MPDSM • • • • • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band ENTRY POSITION ENTRY POSITION ENTRY POSITION U - Top Entry 2.00 F Flange Code: R (Standar Grounding Code: 0 (No B F B 2.00 8.20 8.20 8.20 8.20 Main Body Height in mm Main Body Height in mm 8.20 8.20 Main Body Height in mm E C A 2.00 E C A C A C D E 25.00 33.33 C 47.04 A 63.50 61.12 63.50 12.20 12.20 12.20 12.20 15.20 16.50 19.86 28.09 41.86 58.32 55.98 58.57 C A F D B 12.93 12.93 12.93 12.93 15.75 17.35 D A 31.14 39.47 53.37 C 69.71 A 67.26 69.65 F Shell Size 1 2 3 C 4 A 5 6 D F F E E C C C A A A Flange Code: T (Thin Flange) Grounding Code: 0 (No Grounding) Flange Code: T (Thin Flange) Flange Code: T (Thin Flange) GroundingGrounding Code: 0 (No Grounding) Code: 0 (No Grounding) C A D F F F B B F B 2.00 2.00 2.00 B F F B B F Flange Code: S (Standard) Grounding Code: 0 (No Grounding) C A Flange Code: S (Standard) Flange Code: R (Standard, Tab Recess) Grounding Code: 0 (NoCode: Grounding) Flange Code: S (Standard) Flange Code: S Grounding (Standard) Code: 0 (No Grounding) Flange Code: R (Standard, Tab Recess) Flange Code: R (Standard, Tab Recess) Flange T (Thin Flange) GroundingGrounding Code: 0 (No Grounding) Code: 0 (No Grounding) GroundingGrounding Code: 0 (No Grounding) Code: 0 (No Grounding) Grounding Code: 0 (No Grounding) 2.00 2.00 U - Top Entry U - Top Entry 14.73 14.73 14.73 14.73 17.55 19.15 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 26 D-Subminiature MPDSM Series – Micro Band Termination with Tie Post EXAMPLE MPDSM - U 3 L H S 0 - 06 - 30 - 1 - C - S 2.00 2.00 MAIN BODY HEIGHT Increments of 10 mm F F B B ENTRY SIZE 02 - 14 GROUNDING OPTION 0 No Grounding 1 1 Off Comb E E C CA C FLANGE STYLE CA Flange T Thin A S Standard Flange R Standard Flange with Tab Recess A 2.00 F F B B F BF B EE F F CC B B F Grounding Code: 1 (1 Off Comb) Flange Code: R (Standard, Tab Recess) 2.00 2.00 F BF B D D F C CA A F F B B Grounding Grounding Code: Code:1 1 Grounding Grounding (1(1Code: Off Off Comb) Comb) Code: 1 1 (1 Off (1 Off Comb) Comb) F F B Flange FlangeCode: Code:RR(Standard, (Standard,Tab TabRecess) Recess) Flange Flange Code: Code: R (Standard, R (Standard, Tab Tab Recess) Recess) Code: STab (Standard) Flange Code:Flange R (Standard, Recess) 2.00 Flange Code: S (Standard) Grounding Code: 1 (1 Off Comb) Flange FlangeCode: Code:S S(Standard) (Standard) Flange Flange Code: Code: S (Standard) S (Standard) 2.00 2.00 2.00 2.00 Flange Code: T (Thin Flange) Flange Code: T (Thin Flange) CAA C A A ECCE B SHELL STYLE L Sliding Lid Body INTERFACE VARIANT H Handed MATERIAL (See Page 6) 2.00 2.00 2.00 2.00 SHELL SIZE 1, 2, 3, 4, 5, 6 PLATING (See Page 6) Accessories CAA C Entry Position A A E NDING COMBS SHOWN FOR ILLUSTRATIVE PURPOSES ONLY - COMBS ARE SOLD SEPARATELY C C Circular Entry Elliptical Entry NDING COMBS SHOWN FOR ILLUSTRATIVE PURPOSES ONLY - COMBS ARE SOLD SEPARATELY C A A A FlangeCode: Code:TT(Thin (ThinFlange) Flange) ØZFlange E C Y A Flange Flange Code: Code: T (Thin T (Thin Flange) Flange) X (1 Off Comb) Entry Size (Elliptical) F F F F F Entry Dia Z Size (Circular) Min 02 3.18 Grounding Grounding 03 4.77 Code: Code: 1 1 Grounding Grounding (1(1Code: Off Off Comb) Comb) 04 Code: 1 1 6.35 (1 Off (1 05 Off Comb) Comb) 7.93 06 9.53 Grounding Code: 07 11.11 1 (1 Off Comb) 08 12.70 09 14.29 D F U – Top Entry Shell Size Circular Elliptical 1 02 - 06 NA 2 02 - 06 07 - 08 3 02 - 06 07 - 11 4 02 - 06 07 - 14 5 02 - 08 09 - 13 Grounding 6 Code: 02 - 109 10 - 14 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Flange Code: T (Thin Flange) 07 08 09 10 CC 11 CAA C 12 A A 13 14 X Min Y Min 13.0 16.5 20.5 24.7 29.4 34.6 40.2 46.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 D D D D ENTRY SIZE TABLE 1 – CIRCULAR Flange Code: T (Thin Flange) ENTRY ONLY D F F B B ENTRY POSITION U Top Entry Grounding Code: 1 Grounding (1 Off Comb) Code: 1 (1 Off Comb) HARDWARE OPTION (See Page 31) O, S, H, E, F, K Flange Code: R (Standard, Tab Recess) Flange Code: R (Standard, Tab Recess) MPDSM 2.00 2.00 TERMINATION SERIES Flange Code: S (Standard) Flange Code: S (Standard) MBDSM For MIL-DTL-24308 Connectors C C GROUNDING GROUNDING COMBS COMBSSHOWN SHOWNFOR FORILLUSTRATIVE ILLUSTRATIVEPURPOSES PURPOSES ONLY ONLY- -COMBS COMBSARE ARESOLD SOLDSEPARATEL SEPARATE GROUNDING GROUNDING COMBS COMBS SHOWN SHOWN FOR FOR ILLUSTRATIVE ILLUSTRATIVE PURPOSES PURPOSES ONLY - COMBS - COMBS ARE ARE SOLD SOLD SEPARATELY SEPARATE A A ONLY Grounding Combs Shown for Illustrative Purposes Only – Combs are Sold Separately Measurements shown in mm GROUNDING COMBS SHOWN FOR ILLUSTRATIVE PURPOSES GROUNDING ONLY COMBS - COMBS SHOWN AREFOR SOLD ILLUSTRATIVE SEPARATELY PURPOSES ONLY - COMBS ARE SOLD SE AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 27 D-Subminiature For MIL-DTL-24308 Connectors Split Body, Shrouded with Tie Post • • • • MPDSM Overall screen termination by band Easy installation over already terminated wires Provides strain relief by tying cables in place using post Bands ordered separately from TE – see page 49 Accessories SPECIFICATION • Mates to: MIL-DTL-24308 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band Main Body Height in mm R 20 R Main Body Height in mm 8.20 8.20 8. 20 F – 45° End Entry 8. 20 Entry Position U – Top Entry 8. E – 90° End Entry J – 45° Side Entry 8. 20 R R Main Body Height in mm Main Body Height in mm 8.20 8.20 S – 90° Side Entry Main Body Height in mm 8.20 8.20 R MBDSM MPDSM Series – Micro Band Termination with Tie Post R – Mounting Position; R –Page Mounting See 27 Position; See Sheet 4 Shell Size U – Top Entry Main Body Height in mm F – 45° End Entry Main Body Height in mm E – 90° End Entry Main Body Height in mm J – 45° Side Entry Main Body Height in mm S – 90° Side Entry Main Body Height in mm 1 2 3 4 5 6 30.0 30.0 30.0 30.0 30.0 30.0 40.0 40.0 45.0 50.0 50.0 50.0 Main Body Height for Entry Position E is Determined by Entry Size – Please See Page 30 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 35.0 35.0 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 28 D-Subminiature MPDSM Series – Micro Band Termination with Tie Post EXAMPLE MPDSM - U 3 T S 3 0 - 06 - 30 - 1 - C - S HARDWARE OPTION (See Page 31) O, S, H, E, F, M TERMINATION SERIES PLATING (See Page 6) MATERIAL (See Page 6) ENTRY SIZE 02 - 17 GROUNDING OPTION 0 No Grounding B INTERFACE VARIANT S Shrouded MOUNTING CODE 1, 2, 3, 4, 5, 6, 7 C B A C Shell Size 1 2 3 4 5 6 A 35.0 43.3 57.5 73.3 70.9 73.3 B 16.0 16.0 16.0 16.0 19.0 20.5 C 25.00 33.33 47.04 63.50 61.12 63.50 Mounting Code Receptacle Mounting Position Panel Thickness R 1 2 3 4 5 6 7 Front Mount Rear Mount Rear Mount Rear Mount Rear Mount Rear Mount Rear Mount — 0.79 1.57 2.36 3.18 3.97 4.77 7.74 6.32 5.53 4.74 3.93 3.14 2.34 A R Mounting Code Mounting Code Measurements shown in mm R AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 29 Accessories MAIN BODY HEIGHT (See Page 28) Not a Variable Option SHELL SIZE 1, 2, 3, 4, 5, 6 SHELL STYLE T Two Piece Body MPDSM ENTRY POSITION (See Page 28) U Top Entry F End 45° Entry E End 90° Entry J Side 45° Entry S Side 90° Entry MBDSM For MIL-DTL-24308 Connectors D-Subminiature For MIL-DTL-24308 Connectors AVAILABLE ENTRY SIZES Shell Size 1 2 3 4 5 6 U – Top Entry Circular Elliptical 02 - 08 NA 02 - 08 09 02 - 08 09 - 12 02 - 08 09 - 14 02 - 09 10 - 14 02 - 10 11 - 17 F – 45° End Entry Circular Elliptical 02 - 08 NA 02 - 08 NA 02 - 08 09 02 - 08 09 - 11 02 - 09 10 - 11 02 - 10 11 E – 90° End Entry Circular Elliptical 02 - 08 09 - 10 02 - 08 09 - 10 02 - 08 09 - 10 02 - 08 09 - 10 02 - 09 10 02 - 10 — J – 45° Side Entry Circular Elliptical 02 - 04 NA 02 - 08 NA 02 - 08 09 - 10 02 - 08 09 - 13 02 - 09 10 - 13 02 - 10 11 - 13 S – 90° Side Entry Circular Elliptical 02 - 04 NA 02 - 08 NA 02 - 08 09 - 10 02 - 08 09 - 13 02 - 09 10 - 13 02 - 10 11 - 13 Entry Position Circular Entry Elliptical Entry Y Accessories MPDSM MBDSM MPDSM Series – Micro Band Termination with Tie Post ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Size (Circular) Dia Z Min 02 03 04 05 06 07 08 09 10 3.18 4.77 6.35 7.93 9.53 11.11 12.70 14.29 15.88 U – Top Entry Main Body Height in mm Main Body Height for Entry Position U is Determined by Shell Size – Please See Page 28 F – 45° End Entry Main Body Height in mm E – 90° End Entry Main Body Height in mm J – 45° Side Entry Main Body Height in mm S – 90° Side Entry Main Body Height in mm Main Body Height for Entry Position F is Determined by Shell Size – Please See Page 28 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 Main Body Height for Entry Position J is Determined by Shell Size – Please See Page 28 Main Body Height for Entry Position S is Determined by Shell Size – Please See Page 28 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 09 10 11 12 13 14 15 16 17 20.5 24.7 29.4 34.6 40.2 46.2 52.7 50.0 49.2 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12.0 13.9 U – Top Entry Main Body Height in mm Main Body Height for Entry Position U is Determined by Shell Size – See Page 28 F – 45° End Entry E – 90° End Entry J – 45° Side Entry S – 90° Side Entry Main Body Main Body Main Body Main Body Height in mm Height in mm Height in mm Height in mm Main Body Height for Entry Position F is Determined by Shell Size – See Page 28 45.0 45.0 NA NA NA NA NA NA NA Main Body Height for Entry Position J is Determined by Shell Size – Please See Page 28 Main Body Height for Entry Position S is Determined by Shell Size – Please See Page 28 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 30 D-Subminiature Accessories MBDSM For MIL-DTL-24308 Connectors Hardware Options MPDSM Hardware Options Accessories Hardware Option Code: S Slotted Head Jackscrew Retained with ‘Over-End’ Clip Material: Stainless Steel, Passivate Finish Not Recommended for Use with Entry Positions F and E Hardware Option Code: H Hex Drive Socket Head Jackscrew Retained with ‘Over-End’ Clip Material: Stainless Steel, Passivate Finish Hardware Option Code: E Extended Slotted Head Jackscrew Retained with ‘Over-End’ Clip Material: Stainless Steel, Passivate Finish Not Available for Entry Positions F and E Hardware Option Code: F Female Thread Jackpost Material: Stainless Steel, Passivate Finish Hardware Option Code: 0 (Zero) Backshell Supplied without Hardware AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 31 D-Subminiature MBDSM Accessories For MIL-DTL-24308 Connectors DPC Series: Protection Cap Assembly 15.50 MAX A PART MARK MPDSM C Accessories B D GASKET LANYARD EXAMPLE DPC 3 M 1 C BK 4 02 NG BASIC SERIES NO GASKET (Omit if Gasket is Required) SHELL SIZE ATTACHMENT TYPE 00 No Eyelet 01-05 Eyelet Ref. (Table 2)  CF Crimp Ferrule (Supplied Loose) HARDWARE OPTION M Jackscrews F Jackposts LANYARD LENGTH (In Inches) 3" 76.2 mm 4" 101.6 mm  5" 127.0 mm 6" 152.4 mm 12" 304.8 mm MATERIAL (See Page 6) PLATING (See Page 6) LANYARD TYPE (See Table 3) HARDWARE OPTION H TABLE 1 HARDWARD OPTION M Shell Size 1 2 3 4 5 6 A 31.19 39.52 53.42 69.76 67.31 69.70 B 12.93 12.93 12.93 12.93 15.75 17.35 4-40 UNC - 2A TABLE 2 Eyelet Ref. 00 01 02 03 04 05 D N/A 3.2 3.7 4.3 5.3 6.4 TABLE 3 SLOTTED-HEAD C SCREW 25.00 33.33 47.04 63.50 61.12 63.50 Code WR TC WG WB WRB LC BK 4-40 UNC - 2A VGB B R NB NK HARDWARE OPTION F HEX SOCKET Lanyard HEAD SCREW JACK POST Type Nylon Covered (Clear) Stainless Steel Wire Rope Teflon Covered (Clear) Stainless Steel Wire Rope Teflon Covered (Olive Drab) Stainless Steel Wire Rope Teflon Covered (Black) Stainless Steel Wire Rope PVC Covered (Black) Stainless Steel Wire Rope Link Chain Black Cord 1.5 mm Black Polyester Cord Equivalent to DIN83330-E1.5 Bead Chain 4-40 UNC - 2B Olive Drab Polyester Cord Olive Drab Nylon Cord Black Nylon Cord Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 32 Micro-D MBMMD Series – Micro Band Termination MBMMD For MIL-DTL-83513 Connectors Single Body, Flange Mount Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements With or without heat shrink boot groove Bands ordered separately from TE – see page 49 Accessories SPECIFICATION • Mates to: MIL-DTL-83513 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band Entry Position F – 45° End Entry Main Body Height in mm Main Body Height in mm 8.20 8. 20 U – Top Entry 8.20 J – 45° Side Entry 8. 20 Main Body Height in mm Main Body Height in mm E – 90° End Entry 8.20 Main Body Height in mm S – 90° Side Entry AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES MPMMD • • • • PAGE 33 Micro-D For MIL-DTL-83513 Connectors EXAMPLE MBMMD - U D S M S 0 - 05 - 30 - 1 - C - S HARDWARE OPTION (See Page 47) O, S, H, E, F TERMINATION SERIES ENTRY POSITION (See Page 33) U Top Entry F End 45° Entry E End 90° Entry J Side 45° Entry S Side 90° Entry PLATING (See Page 6) MATERIAL (See Page 6) MAIN BODY HEIGHT Increments of 5 mm SHELL SIZE A, B, C, D, E, F, G, H SHELL STYLE S Single Piece Body INTERFACE VARIANT M Mirrored ENTRY SIZE 02 - 11 GROUNDING OPTION 0 No Grounding Flange Code: T (Thin Flange)* Code: S (Standard) 0.80 4.40 FLANGE STYLE Flange T Thin Flange S Standard Flange Flange Code: T (Thin Flange)* 0.80 4.40 Flange Code: S (Standard) D Thread D Thread B B E E Shell Size A B 3 D E F G H Connector Ref. C09 15 A 21 25 31 37 51 100 C A B C A B Accessories MPMMD MBMMD MBMMD Series – Micro Band Termination A 19.68 23.50 27.30 29.84 33.66 37.46 36.20 54.86 B 9.00 9.00 9.00 9.00 9.00 9.00 10.00 11.00 C 14.35 18.16 21.97 24.51 28.32 32.13 30.86 45.72 D C A E 2-56 UNC – 2A 2.40 4-40 UNC – 2A 3.60 * - Thin flange option is not supported with TE supplied hardware; all part descriptions including code ‘T’ for thin flange must use code ‘0’ for hardware. Thin flange backshells are designed to accommodate a customer-sourced jack screw of maximum head diameter of:Shell sizes A to G: 3.50 mm (.138") Shell size H: 4.60 mm (.181") Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 34 Micro-D MBMMD Series – Micro Band Termination MBMMD For MIL-DTL-83513 Connectors AVAILABLE ENTRY SIZES 09 15 21 25 31 37 51 100 F – 45° End Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 E – 90° End Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 J – 45° Side Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 S – 90° Side Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 * Maximum entry size not supported within the 60.0 mm maximum main body height when grounding combs are deployed; maximum entry size is limited to 17 (F entry position) and 12 (E entry position) Entry Position Circular Entry Y Elliptical Entry ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY U – Top Entry Entry Dia Z Minimum Size Body (Circular) Min Main Height in mm 02 03 04 05 3.18 4.77 6.35 7.93 15.0 15.0 15.0 15.0 F – 45° End Entry Minimum Main Body Height in mm E – 90° End Entry Minimum Main Body Height in mm J – 45° Side Entry Minimum Main Body Height in mm S – 90° Side Entry Minimum Main Body Height in mm Standard Flange Thin Flange Standard Flange Thin Flange Standard Flange Thin Flange Standard Flange Thin Flange 25.0 25.0 25.0 30.0 20.0 20.0 20.0 20.0 25.0 30.0 30.0 30.0 20.0 20.0 25.0 25.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min U – Top Entry Minimum Main Body Height in mm 05 06 07 08 08* 09 10 11 10.70 15.00 20.00 25.00 23.50 25.00 31.00 36.00 6.0 6.0 6.0 6.0 6.5 8.0 8.0 8.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 F – 45° End Entry Minimum Main Body Height in mm E – 90° End Entry Minimum Main Body Height in mm J – 45° Side Entry Minimum Main Body Height in mm S – 90° Side Entry Minimum Main Body Height in mm Standard Flange Thin Flange Standard Flange Thin Flange Standard Flange Thin Flange Standard Flange Thin Flange 30.0 30.0 35.0 40.0 40.0 40.0 45.0 45.0 25.0 25.0 30.0 35.0 30.0 30.0 35.0 45.0 35.0 40.0 45.0 50.0 50.0 50.0 55.0 60.0 25.0 30.0 35.0 40.0 40.0 40.0 45.0 50.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 * Entry size dimensions apply to shell sizes G and H only Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 35 Accessories A B C D E F G H U – Top Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 MPMMD Shell Connector Size Ref. Micro-D Entry Position – Top Entry Split Body, FlangeUMount Main Body Height in mm See Entry Table 1 and 2 8.20 8. 2 Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements Easy installation over already terminated wires Bands ordered separately from TE – see page 49 Main Body Height in mm • • • • SPECIFICATION Accessories F – 45° End Entry 0 For MIL-DTL-83513 Connectors MPMMD • Mates to: MIL-DTL-83513 • Screen Termination: Overall screen 4.40 (Standard Flange) • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band EXAMPLE MBMMD - U D T M S 0 - 05 - 20 - 1 - C - S SHELL STYLE T Two Piece (Split) Body INTERFACE VARIANT M Mirrored FLANGE STYLE S Standard Flange MATERIAL (See Page 6) MAIN BODY HEIGHT (See Page 37) Entry EntryPosition Positio Not a Variable Option – Top Entry ENTRY SIZEU U – Top Entry 02 - 11 8.20 8.20 SHELL SIZE A, B, C, D, E, F, G, H PLATING (See Page 6) GROUNDING OPTION 0 No Grounding Main Body Height in mm Main Body Height in mm ENTRY POSITION (See Page 36) U Top Entry F End 45° Entry E End 90° Entry HARDWARE OPTION (See Page 47) O, S,8.20 H, E, F E – 90° End Entry C A Entry Entry Position Position 8.20 E– End Entry E 90° – 90° End Entry 8.20 Main Body Height in mm Main Body See Height Entry Table 1 and 2 in mm See Entry Table 1 and 2 8. 2 8. 0 20 F –F45° – 45° End End Entry Entry Main Body Height in mm Main Body See Entry Table 1 and 2 Height in mm See Entry Table 1 and 2 4.40 (Standard 4.40 Flange) (Standard Flange) Main Body Height in mm Main Body Height in mm 8.20 8.20 U –UTop – Top Entry Entry 4.40 (Standard 4.40 Flange) (Standard Flange) B D Thread DD Thread Thread 8.20 8.20 –E90° – 90° End End Entry Entry AEROSPACE, E DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 36 B B m 1mand 2 1 and 2 Main Body Height in mm Main Body See Height Entry Table 1 and 2 in mm See Entry Table 1 and 2 TERMINATION SERIES Main Body Height in mm See Entry Table 1 and 2 MBMMD MBMMD Series – Micro Band Termination C Micro-D MBMMD Series – Micro Band Termination A 19.68 23.50 27.30 29.84 33.66 37.46 36.20 54.86 B 9.00 9.00 9.00 9.00 9.00 9.00 10.00 11.00 C 14.35 18.16 21.97 24.51 28.32 32.13 30.86 45.72 D Thread E 2-56 UNC – 2A 2.40 4-40 UNC – 2A 3.60 Accessories Connector Ref. 09 15 21 25 31 37 51 100 MPMMD Shell Size A B C D E F G H MBMMD For MIL-DTL-83513 Connectors AVAILABLE ENTRY SIZES Shell Connector Size Ref. A B C D E F G H 09 15 21 25 31 37 51 100 U – Top Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 F – 45° End Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 Entry Position Circular Entry E – 90° End Entry Circular Elliptical 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 04 05 - 08 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 Y Elliptical Entry ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Dia Z Size (Circular) Min 02 03 04 05 U – Top Entry Minimum Main Body Height in mm 3.18 4.77 6.35 7.93 F – 45° End Entry Minimum Main Body Height in mm E – 90° End Entry Minimum Main Body Height in mm Standard Flange 25.0 25.0 25.0 30.0 Standard Flange 25.0 30.0 30.0 30.0 20.0 20.0 20.0 20.0 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 05 06 07 08 08* 09 10 11 10.70 15.00 20.00 25.00 23.50 25.00 31.00 36.00 6.0 6.0 6.0 6.0 6.5 8.0 8.0 8.0 F – 45° End Entry Minimum E – 90° End Entry Minimum U – Top Entry Main Body Height in mm Main Body Height in mm Minimum Main Body Height in mm Standard Flange Standard Flange 15.0 30.0 35.0 15.0 30.0 40.0 15.0 35.0 45.0 15.0 40.0 50.0 15.0 40.0 50.0 15.0 40.0 50.0 15.0 45.0 55.0 15.0 45.0 60.0 * Entry size dimensions apply to shell sizes G and H only Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 37 Micro-D For MIL-DTL-83513 Connectors Split Body, Shrouded Overall screen termination by band U wires - Top Entry Easy installation over already terminated Flexible design, suitable for retro fit and prototyping Bands ordered separately from TE – see page 49 8.20 • • • • MPMMD MBMMD MBMMD Series – Micro Band Termination Accessories SPECIFICATION Main Body Height • Mates to: MIL-DTL-24308 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band E U - Top Entry B Main Body Height 8.20 D Thread C E A EXAMPLE D Thread B MBMMD - U D T S 0 0 - 05 - 17 - 1 - C - S HARDWARE OPTION (See Page 47) O, S, H, E, F, K TERMINATION SERIES ENTRY POSITION U Top Entry SHELL SIZE A, B, C, D, E, F, G, H PLATING (See Page 6) C A SHELL STYLE T Two Piece (Split) Body INTERFACE VARIANT S Shrouded MOUNTING CODE 0-1 AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES MATERIAL (See Page 6) MAIN BODY HEIGHT (See Page 39) Not a Variable Option ENTRY SIZE 02 - 11 GROUNDING OPTION 0 No Grounding PAGE 38 Micro-D MBMMD Series – Micro Band Termination A B Body D Thread Main Height A B C D E F G 09 15 21 25 31 37 51 23.09 26.90 30.71 33.25 37.06 40.87 39.60 9.60 9.60 9.60 9.60 9.60 9.60 9.60 14.35 18.16 21.97 2-56 24.51 UNC – 2A 28.32 32.13 30.86 17.0 17.0 17.0 17.0 17.0 20.0 22.0 H 100 58.27 12.00 45.72 4-40 UNC – 2A 22.0 C Shell Size Connector Ref. A B C D E F G H 09 15 21 25 31 37 51 100 Mounting Code Receptacle Mounting Position Panel Thickness E 0 1 Rear Mount Rear Mount 3.50 1.60 3.20 5.10 Accessories Connector Ref. U – Top Entry Circular Elliptical 02 - 04 NA 02 - 05 NA 02 - 05 06 02 - 05 06 02 - 05 06 - 07 02 - 05 06 - 08 02 - 05 06 - 08 02 - 05 06 - 11 Entry Position Circular Entry Y Elliptical Entry ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Dia Z Size (Circular) Min 02 03 04 05 3.18 4.77 6.35 7.93 MPMMD Shell Size MBMMD For MIL-DTL-83513 Connectors ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 06 07 08 08* 09 10 11 15.00 20.00 25.00 23.50 25.00 31.00 36.00 6.00 6.00 6.00 6.50 8.00 8.00 8.00 * Entry size dimensions apply to shell sizes G and H only Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 39 Micro-D For MIL-DTL-83513 Connectors Single Body, Flange Mount with Tie Post • • • • MPMMD MBMMD MPMMD Series – Micro Band Termination with Tie Post Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements With or without heat shrink boot groove Bands ordered separately from TE – see page 49 Accessories SPECIFICATION • Mates to: MIL-DTL-83513 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band Entry Position F – 45° End Entry Main Body Height in mm Main Body Height in mm 8.20 8. 20 U – Top Entry J – 45° Side Entry 8.20 8. 20 Main Body Height in mm Main Body Height in mm E – 90° End Entry 8.20 Main Body Height in mm S – 90° Side Entry AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 40 Micro-D MPMMD Series – Micro Band Termination with Tie Post EXAMPLE MPMMD - U D S M S 0 - 05 - 30 - 1 - C - S HARDWARE OPTION (See Page 47) O, S, H, E, F TERMINATION SERIES PLATING (See Page 6) MATERIAL (See Page 6) Accessories MAIN BODY HEIGHT Increments of 5 mm SHELL SIZE A, B, C, D, E, F, G, H SHELL STYLE S Single Piece Body INTERFACE VARIANT M Mirrored MPMMD ENTRY POSITION (See Page 40) U Top Entry F End 45° Entry E End 90° Entry J Side 45° Entry S Side 90° Entry ENTRY SIZE 02 - 11 GROUNDING OPTION 0 No Grounding Flange Code: T (Thin Flange)* 0.80 4.40 Flange Code: S (Standard) FLANGE STYLE T Thin Flange S Standard Flange Flange Code: T (Thin Flange)* 0.80 4.40 Flange Code: S (Standard) D Thread D Thread B B E E Shell Size A B 3 D E F G H Connector C Ref. 09 A 15 21 25 31 37 51 100 C A B B C A A 19.68 23.50 27.30 29.84 33.66 37.46 36.20 54.86 B 9.00 9.00 9.00 9.00 9.00 9.00 10.00 11.00 C 14.35 18.16 21.97 24.51 28.32 32.13 30.86 45.72 D C A E 2-56 UNC – 2A 2.40 4-40 UNC – 2A 3.60 * - Thin flange option is not supported with TE supplied hardware; all part descriptions including code ‘T’ for thin flange must use code ‘0’ for hardware. Thin flange backshells are designed to accommodate a customer-sourced jack screw of maximum head diameter of:Shell sizes A to G: 3.50 mm (.138") Shell size H: 4.60 mm (.181") Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES MBMMD For MIL-DTL-83513 Connectors PAGE 41 Micro-D For MIL-DTL-83513 Connectors AVAILABLE ENTRY SIZES Shell Connector Size Ref. A B C D E F G H 09 15 21 25 31 37 51 100 U – Top Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 F – 45° End Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 E – 90° End Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 J – 45° Side Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 S – 90° Side Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 * Maximum entry size not supported within the 60.0 mm maximum main body height when grounding combs are deployed; maximum entry size is limited to 17 (F entry position) and 12 (E entry position) Entry Position Circular Entry Elliptical Entry Y Accessories MPMMD MBMMD MPMMD Series – Micro Band Termination with Tie Post ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY U – Top Entry Entry Dia Z Minimum Size Body (Circular) Min Main Height in mm 02 03 04 05 3.18 4.77 6.35 7.93 15.0 15.0 15.0 15.0 F – 45° End Entry Minimum Main Body Height in mm E – 90° End Entry Minimum Main Body Height in mm J – 45° Side Entry Minimum Main Body Height in mm S – 90° Side Entry Minimum Main Body Height in mm Standard Flange Thin Flange Standard Flange Thin Flange Standard Flange Thin Flange Standard Flange Thin Flange 25.0 25.0 25.0 30.0 20.0 20.0 20.0 20.0 25.0 30.0 30.0 30.0 20.0 20.0 25.0 25.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min U – Top Entry Minimum Main Body Height in mm 05 06 07 08 08* 09 10 11 10.70 15.00 20.00 25.00 23.50 25.00 31.00 36.00 6.0 6.0 6.0 6.0 6.5 8.0 8.0 8.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 F – 45° End Entry Minimum Main Body Height in mm E – 90° End Entry Minimum Main Body Height in mm J – 45° Side Entry Minimum Main Body Height in mm S – 90° Side Entry Minimum Main Body Height in mm Standard Flange Thin Flange Standard Flange Thin Flange Standard Flange Thin Flange Standard Flange Thin Flange 30.0 30.0 35.0 40.0 40.0 40.0 45.0 45.0 25.0 25.0 30.0 35.0 30.0 30.0 35.0 45.0 35.0 40.0 45.0 50.0 50.0 50.0 55.0 60.0 25.0 30.0 35.0 40.0 40.0 40.0 45.0 50.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 * Entry size dimensions apply to shell sizes G and H only Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 42 Micro-D MPMMD Series – Micro Band Termination with Tie Post MBMMD For MIL-DTL-83513 Connectors Entry Position 20 8. 20 8. Main Body Height in mm See Entry Table 1 and 2 8.20 F – 45° End Entry SPECIFICATION • Mates to: MIL-DTL-83513 • Screen Termination: Overall screen • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band 4.40 (Standard Flange) Main Body Height in mm U – Top Entry Overall screen termination by band Wide range of circular or elliptical entry ports to suit cable requirements With or without heat shrink boot groove Bands ordered separately from TE – see page 49 MPMMD - U D T M S 0 - 05 - 20 - 1 - C - S SHELL SIZE A, B, C, D, E, F, G, H SHELL STYLE T Two Piece (Split) Body INTERFACE VARIANT M Mirrored 8.20 8.20 Main Body Height in mm See Entry Table 1 and 2 E – 90° End Entry FLANGE STYLE S Standard Flange MATERIAL (See Page 6) MAIN BODY HEIGHT Entry Position U U –of Top Entry Increments 5 mm  Entry Position E and F Top Entry Defined U on– page 44 ENTRY SIZE 02 - 11 GROUNDING OPTION 0 No Grounding B D Thread Entry Position C A F – 45° End Entry 4.40 (Standard Flange) Main Body Main Body Height in mmin mm Height See Entry Table 1 and 12and 2 See Entry Table Main Body Height in mm Main Body Height in mm See Entry Table 1 and 2 8.20 8. 20 8.20 8. 2 0 U – Top Entry PLATING (See Page 6) E – 90° End Entry E – 90° End Entry Entry Position Entry Position F Main Body Main Body Height in mmin mm Height See Entry Table Table 1 and 12and 2 See Entry ENTRY POSITION U Top Entry F End 45° Entry E End 90° Entry HARDWARE OPTION (See Page 31) O, S, H, E, F 4.40 4.40Main Body Main Body Height in mmin mm 8.20 8.20 8.20 8.20 (Standard Height (Standard Flange) Flange) TERMINATION SERIES 8.20 8.20 8.20 8.20 D Thread D Thread AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES B 8.20 8.20 B E – 90° End Entry dy mm e 1 and 2 Accessories EXAMPLE • • • • MPMMD 8.20 Split Body, Flange Mount with Tie Post PAGE 43 C A Micro-D For MIL-DTL-83513 Connectors Shell Size A B C D E F G H Connector Ref. 09 15 21 25 31 37 51 100 A 19.68 23.50 27.30 29.84 33.66 37.46 36.20 54.86 B 9.00 9.00 9.00 9.00 9.00 9.00 10.00 11.00 C 14.35 18.16 21.97 24.51 28.32 32.13 30.86 45.72 D Thread 2-56 UNC – 2A 4-40 UNC – 2A AVAILABLE ENTRY SIZES Shell Connector Size Ref. A B C D E F G H 09 15 21 25 31 37 51 100 U – Top Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 F – 45° End Entry Circular Elliptical 02 - 04 NA 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 Entry Position Circular Entry E – 90° End Entry Circular Elliptical 02 - 04 05 02 - 04 05 - 06 02 - 04 05 - 07 02 - 04 05 - 08 02 - 04 05 - 08 02 - 04 05 - 08 02 - 05 06 - 08 02 - 05 06 - 11 Elliptical Entry Y Accessories MPMMD MBMMD MPMMD Series – Micro Band Termination with Tie Post ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Dia Z Size (Circular) Min 02 03 04 05 U – Top Entry Minimum Main Body Height in mm 3.18 4.77 6.35 7.93 F – 45° End Entry Minimum Main Body Height in mm E – 90° End Entry Minimum Main Body Height in mm Standard Flange 25.0 25.0 25.0 30.0 Standard Flange 25.0 30.0 30.0 30.0 20.0 20.0 20.0 20.0 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 05 06 07 08 08* 09 10 11 10.70 15.00 20.00 25.00 23.50 25.00 31.00 36.00 6.0 6.0 6.0 6.0 6.5 8.0 8.0 8.0 F – 45° End Entry Minimum E – 90° End Entry Minimum U – Top Entry Main Body Height in mm Main Body Height in mm Minimum Main Body Height in mm Standard Flange Standard Flange 15.0 30.0 35.0 15.0 30.0 40.0 15.0 35.0 45.0 15.0 40.0 50.0 15.0 40.0 50.0 15.0 40.0 50.0 15.0 45.0 55.0 15.0 45.0 60.0 * Entry size dimensions apply to shell sizes G and H only Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 44 Micro-D MPMMD Series – Micro Band Termination with Tie Post MBMMD For MIL-DTL-83513 Connectors Split Body, Shrouded with Tie Post • Mates to: MIL-DTL-83513 Accessories SPECIFICATION 8.20 8.20 Overall screen termination by band U - Top Entry Wide range of circular or elliptical entry ports to suit cable requirements With or without heat shrink boot groove Bands ordered separately from TE – see page 49 • Screen Termination: Overall screen Main Body Height • Strain Relief and Cable Sealing: Heat shrink boot option • Additional Components Required: Boot, band E 8.20 U - Top Entry MPMMD • • • • B Main Body Height 8.20 D Thread C E A EXAMPLE D Thread MPMMD - U D T S 0 0 - 05 - 17 - 1 - C - S HARDWARE OPTION (See Page 47) O, S, H, E, F, K B TERMINATION SERIES ENTRY POSITION U Top Entry SHELL SIZE A, B, C, D, E, F, G, H PLATING (See Page 6) C A SHELL STYLE T Two Piece (Split) Body INTERFACE VARIANT S Shrouded MOUNTING CODE 0-1 AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES MATERIAL (See Page 6) MAIN BODY HEIGHT (See Page 46) Not a Variable Option ENTRY SIZE 02 - 11 GROUNDING OPTION 0 No Grounding PAGE 45 Micro-D For MIL-DTL-83513 Connectors Shell Size Connector Ref. A B C A B C D E F G H 09 15 21 25 31 37 51 100 23.09 26.90 30.71 33.25 37.06 40.87 39.60 58.27 9.60 9.60 9.60 9.60 9.60 9.60 9.60 12.00 14.35 18.16 21.97 24.51 28.32 32.13 30.86 45.72 Mounting Code Receptacle Mounting Position Panel Thickness E 0 1 Rear Mount Rear Mount 3.50 1.60 3.20 5.10 D Thread 2-56 UNC – 2A 4-40 UNC – 2A Main Body Height 17.0 17.0 17.0 17.0 17.0 20.0 22.0 22.0 AVAILABLE ENTRY SIZES Shell Connector Size Ref. A B C D E F G H 09 15 21 25 31 37 51 100 U – Top Circular 02 - 04 02 - 05 02 - 05 02 - 05 02 - 05 02 - 05 02 - 05 02 - 05 Entry Elliptical NA NA 06 06 06 - 07 06 - 08 06 - 08 06 - 11 Entry Position Circular Entry Elliptical Entry Y Accessories MPMMD MBMMD MPMMD Series – Micro Band Termination with Tie Post ØZ X ENTRY SIZE TABLE 1 – CIRCULAR ENTRY ONLY Entry Dia Z Size (Circular) Min 02 03 04 05 3.18 4.77 6.35 7.93 ENTRY SIZE TABLE 2 – ELLIPTICAL ENTRY ONLY Entry Size (Elliptical) X Min Y Min 06 07 08 08* 09 10 11 15.00 20.00 25.00 23.50 25.00 31.00 36.00 6.00 6.00 6.00 6.50 8.00 8.00 8.00 * Entry size dimensions apply to shell sizes G and H only Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 46 Micro-D Accessories Options MBMMD For MIL-DTL-83513 Connectors Hardware Hardware Options MPMMD Accessories Hardware Option Code: S Slotted Head Jackscrew Retained with ‘Over-End’ Clip Material: Stainless Steel, Passivate Finish Not Recommended for Use with Entry Positions F and E Hardware Option Code: H Hex Drive Socket Head Jackscrew Retained with ‘Over-End’ Clip Material: Stainless Steel, Passivate Finish Hardware Option Code: E Extended Slotted Head Jackscrew Retained with ‘Over-End’ Clip Material: Stainless Steel, Passivate Finish Not Available for Entry Positions F and E Hardware Option Code: F Female Thread Jackpost Material: Stainless Steel, Passivate Finish Hardware Option Code: 0 (Zero) Backshell Supplied without Hardware to Be Used with All Thin Flange Backshell Options AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 47 Micro-D MBMMD Accessories For MIL-DTL-83513 Connectors A C MPMMD JACK POST KIT B JACK SCREW AND E-CLIP KIT LANYARD LENGTH Accessories MMP-**RF-*-*(-***-**) MMP-**RM-*-*(-***-**) WITHOUT ATTACHMENT MMP-**RM-*-* NO ATTACHMENT VERSION Ø MMP-**RF-*-* NO ATTACHMENT VERSION F EYELET EXAMPLE MMP 31 R F 1 C WR NG 02 ATTACHMENT TYPE 00 No Eyelet 01-05 Eyelet Ref. (See Table 2) CF Crimp Ferrule (Supplied Loose) SERIES SHELL SIZE (Table 1) RECEPTACLE PROTECTION CAP MATERIAL (See Page 6) LANYARD LENGTH IN INCHES 3" 76.2 mm 4" 101.6 mm  5" 127.0 mm 6" 152.4 mm 12" 304.8 mm PLATING (See Page 6) LANYARD TYPE (See Table 3) HARDWARE OPTION M Jackscrews F Jackposts TABLE 1 Shell Size 09 15 21 25 31 37 51 100 TABLE 2 A 19.7 23.5 27.3 29.9 33.7 37.7 36.2 54.8 B 7.6 7.6 7.6 7.6 7.6 7.6 8.6 9.7 C 14.35 18.16 21.97 24.51 28.32 32.13 30.86 45.72 Eyelet Ref. 01 02 03 04 05 TABLE 3 ØF 3.2 3.7 4.3 5.3 6.4 Code WR TC WG WB WRB LC BK VGB B R NB NK Lanyard Type Nylon Covered (Clear) Stainless Steel Wire Rope Teflon Covered (Clear) Stainless Steel Wire Rope Teflon Covered (Olive Drab) Stainless Steel Wire Rope Teflon Covered (Black) Stainless Steel Wire Rope PVC Covered (Black) Stainless Steel Wire Rope Link Chain Black Cord 1.5 mm Black Polyester Cord Equivalent to DIN83330-E1.5 Bead Chain Olive Drab Polyester Cord Olive Drab Nylon Cord Black Nylon Cord Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 48 Accessories Banding Termination Solution MBMMD M85049/128 Band Straps • Meets AS85049 NAVAIR standards • Corrosion resistant stainless steel MPMMD • Self-coupling locking nut provides an improved mechanical protection against loosening under vibration • Band straps available flat for side entry or precoiled for end entry Accessories • Side-entry band straps allow easier installation and repair TWO-STEP BAND STANDARD BAND MICROBAND M85049/128-1 Flat M85049/128-2 Pre-Coiled M85049/128-3 Flat M85049/128-4 Pre-Coiled M85049/128-7 Flat M85049/128-8 Pre-Coiled FLAT BAND - CONFIGURATION 1, 3, 7 A B C F E D Tail length indicator applies only to configuration 3 and 7 PRE-COILED BAND CONFIGURATION 4, 8 G G PRE-COILED BAND CONFIGURATION 2 EXAMPLE H A ± .06 358.90 361.95 206.25 - B ± .031 8.33 8.89 4.95 - C ± .010 D ± .003 6.22 0.48 6.22 0.48 2.92 0.38 - E ± .015 2.54 1.88 1.35 - F Ref 51.59 51.59 - - 1 SERIES CONFIGURATION H Configuration 1 2 3 4 7 8 M85049/128 G Max 3.56 3.81 1.85 H Ref 44.5 44.5 21.8 Suffix -S2 -SB -MB Tool Required M81036/2-01 M81036/2-01 M81036/1-01 M81036/1-01 M81036/1-02 M81036/1-02 Measurements shown in mm AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 49 Glossary of Terms Backshell Any accessory fitted to the rear thread of a connector, providing strain relief, screen termination and/or cable sealing. Blanking Cover Helps to provide environmental protection and EMC shielding to circuitry or shorting loops at the rear of a connector that is to be used as a stand-alone device. Connector Device for electrically connecting wires to each other or to electrical equipment. EMC Electromagnetic compatibility assures the avoidance of interference effects resulting from the unintentional generation, propagation and reception of electromagnetic energy. This can be achieved by properly grounded shielding (screening) or by electronically filtering signals (filter connector). EMI Electromagnetic interference, also called radio-frequency interference when in the radio frequency spectrum, is a disturbance generated by an external source that affects an electrical circuit by electromagnetic induction, electrostatic coupling, or conduction. Entry Size Two digits describe the diameter of the hole through which the cable enters into the backshell. Check specific series for details – note that some series such as boot adaptors (97 series) and cable clamps (96 series) do not require the entry size to be stated. Screenbraid Flexible EMC shield in expanding sleeve form for covering cable. Heat Shrink Boot Molded sleeve that joins the cable jacket to a suitable backshell, for purposes of strain-relief and environmental protection. Heat shrink boots shrink to fit and are installed by use of a specialised hot air gun. Adhesive-lined boots and a variety of materials are available. Strain Relief Any method of relieving the strain on the individual wires, should the cable be put under tension. Common methods are cable clamps, heatshrink boots, tie posts. Shell Size Two numerical digits that state the size of the connector. Shield See EMC Overall Screen EMC shield (e.g. screenbraid) encompassing entire wire bundle. Protective Cover Provides environmental protection and EMC shielding on the front (mating end) of an unmated connector. RoHS The RoHS Directive bans the placing on the EU market of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants. AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 50 Notes AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES PAGE 51 CONNECT WITH US We make it easy to connect with our experts and are ready to provide all the support you need. Visit te.com/support to chat with a Product Information Specialist. QUALITY STARTS WITH THE RIGHT APPLICATION TOOLING Creating a quality crimp connection is essential to delivering high performance and reliability in extreme environments. From low to high volume wire processing, TE has you covered with a full range of application tooling and a global field service team. • View all application tooling • Connect with our experts to find the right tool for your application te.com/polamco-rectangulars AMP, AGASTAT, CII, DEUTSCH, DRI, HARTMAN, KILOVAC, MICRODOT, NANONICS, POLAMCO, Raychem, Rochester, SEACON, TE, TE Connectivity, and TE connectivity (logo) are trademarks owned or licensed by TE Connectivity. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2021 TE Connectivity  All Rights Reserved. 1-1773922-5  11/21      AEROSPACE, DEFENSE & MARINE / RECTANGULAR BACKSHELLS AND ACCESSORIES RECTANGULAR BACKSHELLS AND ACCESSORIES TE Connectivity Aerospace, Defense & Marine 2900 Fulling Mill Road Middletown, PA 17057