General Purpose
Solar Relays
OEG
Power PCB Relay PCFN Solar, 1.8 mm contact gap
n 1
pole 26A, 1 form A (NO) contact
gap >1.8mm
n 200mW hold power
n Ambient temperature up to 75°C at 26A, 85°C at 22A, 90°C at 18A
n Product in accordance to VDE 0126-1-1 and IEC 62109-2
n Contact
Typical applications
Photovoltaic Inverter, charging stations, ...
Coil Data
Contact Data
Contact arrangement
1 form A (NO)
Contact gap
>1.8mm
Rated voltage
277VAC
Rated current
26A
Breaking capacity max.
7200VA
Contact material
AgSnO2
Frequency of operation, with/without load
6/300min-1
Operate/release time max.
20/10ms
Bounce time max., form A
3ms
Contact ratings
Type
Contact Load
IEC 61810 / UL 508
PCFN-1..H2MS
A (NO)
26A, 277VAC, cosφ=1, 75°C
PCFN-1..H2MS
A (NO)
22A, 277VAC, cosφ=1, 85°C
PCFN-1..H2MS
A (NO)
18A, 277VAC, cosφ=1, 90°C
IEC 61810
PCFN-1..H2MS
A (NO)
14A, 277VAC, resistive, 85°C
Mechanical endurance, DC coil
Rated coil voltage
Coil insulation system according UL
Z
12 to 24VDC
Class F
Coil versions, DC coil
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10% W
12
12
8,4
1,2
96
1.51)
24 24 16,8 2,4
384 1.52)
Cycles
30x103
30x103
30x103
100x103
1x106 operations
1) Ambient temperature > 23°C requires reduction of coil voltage to 4.4 to =4.4V at ambient temperature ≤90°C.
2) Ambient temperature > 23°C requires reduction of coil voltage to 8.8 to =8.8V at ambient temperature ≤90°C.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Material group of insulation parts
Tracking index of relay base
2500Vrms
4000Vrms
6.1mm
III
PTI 175
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature3)
-40 to +75°C at 26A
-40 to +85°C at 22A
-40 to +90°C at 18A
Category of environmental protection
IEC 61810
RTII - flux proof
Vibration resistance (functional)
10g
Vibration resistance (destructive)
10g
Shock resistance (destructive)
100g
Terminal type
PCB-THT
Mounting distance
≥10mm
Weight 28g
Resistance to soldering heat THT
IEC 60068-2-20
260°C/10s
Packaging unit tube/20 pcs., box/500 pcs.
3) Ambient temperature > 23°C requires reduction of coil voltage, see index1) and 2)above.
04-2018, Rev. 0418
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
1
General Purpose
Solar Relays
OEG
Power PCB Relay PCFN Solar, 1.8 mm contact gap (Continued)
Dimensions
PCB layout / terminal assignment
Bottom view on solder pins
1,35
NOTE: it is recommended to connect the grid
(phase or neutral line) to pin 11 of the PCFN Solar.
Product code
PCFN-112H2MS
PCFN-124H2MS
2
Version
PCB, flux tight
PCB, flux tight
Contact arrangement
1 form A (NO) contact
1 form A (NO) contact
04-2018, Rev. 0418
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Contact material
AgSnO2
AgSnO2
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Coil
12VDC
24VDC
Part number
2071169-1
2071169-2
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TE Connectivity:
2071169-1