PCH-105D2H

General Purpose Relays PCB Relays OEG Miniature PCB Relay PCH n 5 to 10A rating form A (NO) and 1 form C (CO) contact arrangements n Sensitive coil available for 1 form A type n 1 Typical applications Appliances, HVAC, refrigerators, microwave ovens F_PCH_B VZ Approvals Coil Data (continued) Technical data of approved types on request Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10 % mW Sensitive type (for form A type only) 003 3 2.25 0.15 45 200 005 5 3.75 0.25 125 200 006 6 4.50 0.30 180 200 009 9 6.75 0.45 405 200 012 12 9.00 0.60 720 200 018 18 13.50 0.90 1620 200 024 24 18.00 1.20 2880 200 048 48 36.00 2.40 11520 200 VDE 119568, cULus E82292, CQC08001023449 Contact Data Contact arrangement 1 Form A (NO) Rated voltage 30VDC, 277VAC Max. switching voltage 30VDC, 277VAC Rated current 5 to 10A Contact material AgSnO2 Min. recommended contact load 100mA, 5VDC Frequency of operation 360 ops./h Operate/release time max. 10/5ms Electrical endurance D type: 5A, 277VAC resistive, -30°C to +70°C100x103 ops. L type: 5A, 277VAC resistive, -30°C to +70°C 30x103 ops. D/L-WG type: 5A, 250VAC resistive, -40°C to +85°C 100x103 ops. Contact ratings Type Contact IEC 61810 PCH-..2M-WG A (NO) PCH-..D2-WG A of C PCH-..D2M A (NO) PCH-..L2M A (NO) PCH-..D2 C (CO) UL 508 PCH A (NO) PCH A (NO) Load 5A 250VAC res, 85°C 5A 250VAC res, 85°C 5A 250VAC res, 70°C 5A 250VAC res, 70°C 5A/3A 250VAC res, 40°C 100x103 100x103 100x103 30x103 30x103 10A 125VAC res, 85°C 5A 250VAC general use, 85°C 100x103 100x103 Mechanical endurance, DC coil Coil Data Cycles Coil voltage range Operative range, IEC 61810 Coil insulation system according UL 10x106 operations All figures are given for coil without pre-energization, at ambient temperature +23°C. Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10 % mW Standard type 003 3 2.10 0.15 23 400 005 5 3.50 0.25 63 400 006 6 4.20 0.30 90 400 009 9 6.30 0.45 202 400 012 12 8.40 0.60 360 400 018 18 12.60 0.90 810 400 024 24 16.80 1.20 1440 400 048 Data 48 33.60 2.40 5760 400 Reference Reference All figures areData given for coil without pre-energization, at ambient temperature +23°C. 3 to 48VDC 2 Class F *Above reference data is apply for 1 Form C / NO contact side, rated voltage: 277Vac / Coil power: 400mW. *Above reference data isthe apply for of 1 Form C / NO contactlife. side, rated voltage: 277Vac / Coil power: 400mW. *Please contact with us about graph expected electrical *Please contact with us about the graph of expected electrical life. 09-2010, Rev. 0910 www.tycoelectronics.com © 2010 Tyco Electronics Ltd. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.tycoelectronics.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Ordering Information for Relays General Purpose Relays PCB Relays Example Part No. PCH -1 12 D 2 M H ,000 OEG 1. Basic Series PCH = Compact PCB mount type PCB Relay PCH (Continued) Miniature 2. Poles 1= 1pole 3. Coil Voltage = 5VDC 12= 12VDC Ordering Information for Relays xample PartInsulation No. PCH05Data -1 12 D 2 M H ,000 06 =strength 6VDC 24 = 24VDC Initial dielectric = contacts 9VDC 48 = 750Vrms48VDC* between 09 open ype Ordering Information for Relays Power 4. Coil between contact and coil 4000Vrms Example Part No. D= 400mW (1a,1c) Clearance/creepage = 200mW (1a) 1. Basic Series between Lcontact and coil >1.6/3.2mm 12VDC 5. Contact Material Example Part No. PCH = Compact PCB mount type Tracking index of relay base = 24VDC = AgSnO2 2. Poles standard 2type PTI 175 1. Basic Series = 48VDC* Contact Arrangement 1= = 1pole 6. WG txype PTI 250 PCH Compact PCB mount type blank = 1c 3. Poles Coil Voltage 2. M= 1a 5VDC 12= 12VDC 105== 1pole 7. Enclosure 06 = 6VDC 24 = 24VDC Other Data 3. Coil Voltage blank = EU RoHS/ELV, Flux Proof China RoHS, REACH, Halogen content 09 = = 9VDC 48 = 48VDC* Material compliance: 05 5VDC 12= 12VDC H= Wash 4. Coil Power refer toTight the Product Compliance Support Center at 06 = 6VDC 24 = 24VDC 8. Suffix D == 400mW (1a,1c) www.tycoelectronics.com/customersupport/rohssupportcenter 09 9VDC 48 = 48VDC* ,000 = Standard model L= 200mW (1a) Ambient temperature -40°C to +85°C 4. Coil Power 5. Contact Material Category ofOther environmental protection D= 400mW (1a,1c) Suffix = Custom model = AgSnO2 (1a) IEC 61810 RTII - flux tight L2 = 200mW RTIII - wash tight 6. Contact Contact Material Arrangement 5. *Coil voltage: 48VDC only can chose 400mW type. Shock resistance (functional) 10g 1c 2blank = = AgSnO 2 Shock resistance (destructive) 100g M= 1a 6. Contact Arrangement Weight 7g Terminal assignment 7. Enclosure blank = 1c Resistance to soldering heat THT Bottom view on solder blank = pins 1a Flux Proof M = (Bottom Wiring Diagram View) Outline (mm) IEC Dimensions 60068-2-20 RTII: 270°C/10s H = Wash Tight 7. Enclosure 1a 1c* RTIII: 260°C/5s 11c form C (CO) 1 form A (NO) 8. Suffix blank = Flux Proof Packaging unit tray/100 pcs., carton box/1000 pcs. ,000 = Standard model H= Wash Tight Wiring Diagram (Bottom View) 8. Suffix Other Suffix== Custom model ,000 Standard model 1c 1a Other Suffix = PCH -1 PCH -1 *Coil voltage: 48VDC only can chose 400mW type. Custom model *Coil voltage: 48VDC only can chose 400mW type. PCB layout PC Board Layout (mm) (Bottom View) Bottom view on solder pins 1c Outline Dimensions (mm) PC Board Layout (mm) (Bottom View) 1c* 1c Outline Dimensions (mm) Dimensions 1c* W 1c W 1c 1a P 1c PC 1c 1 form C (CO) 1 form A (NO) 1a *1a Outline dimensions is omitted. Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm 3mm Min.: +/-0.3mm 1a *1a Outline dimensions is omitted. 1a *1a Outline dimensions is omitted. Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 © Copyright 2009 REV.B by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B tronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please call local TYCO Electronics for the latest version. This document is subject to change, Please call local TYCO Electronics for the latest version. 2 09-2010, Rev. 0910 www.tycoelectronics.com © 2010 Tyco Electronics Ltd. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.tycoelectronics.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays OEG Miniature PCB Relay PCH (Continued) Product code structure Typical product code PCH -1 12 D 2 H ,000 Type PCH Miniature PCB Relay PCH Number of poles 1 1 pole Coil voltage Coil code: please refer to coil versions table (e.g. 05=5VDC) Coil sensitivity D Standard 400mW L 200mW (for 1 form A contact only) Contact material 2 AgSnO Contact arrangement Blank 1 form C (CO) contact M 1 form A (NO) contact Category of protection Blank Flux proof, vented cover H Wash tight, sealed plastic cover Insulation system designation Blank Class F system WG Class F system and for domestic appliances (IEC 60335-1, 4 Edition); Suffix ,000 Standard type Other types on request Product code Coil Sensitivity Cont.material Arrangement Enclosure Insulation PCH-105D2H,000 5VDC Standard AgSnO2 1 form C (CO) Wash tight Class F PCH-105L2M,000 Sensitive 1 form A (NO) Flux proof PCH-105L2MH,000 Wash tight PCH-105L2M-WG Flux proof Cl. F, IEC 60335-1 PCH-106D2,000 6VDC Standard 1 form C (CO) Class F PCH-109D2H,000 9VDC Wash tight PCH-112D2,000 12VDC Flux proof PCH-112D2H,000 Wash tight PCH-112D2M,000 1 form A (NO) Flux proof PCH-112D2M-WG Cl. F, IEC 60335-1 PCH-112D2-WG 1 form C (CO) PCH-112L2M,000 Sensitive 1 form A (NO) Class F PCH-112L2MH,000 Wash tight PCH-112L2M-WG Flux proof Cl. F, IEC 60335-1 PCH-124D2,000 24VDC Standard 1 form C (CO) Class F PCH-124D2H,000 Wash tight PCH-124D2M,000 1 form A (NO) Flux proof PCH-124D2MH,000 Wash tight PCH-124L2M,000 Sensitive Flux proof PCH-124L2MH,000 Wash tight PCH-124L2M-WG Flux proof Cl. F, IEC 60335-1 PCH-148D2,000 48VDC Standard 1 form C (CO) Class F 09-2010, Rev. 0910 www.tycoelectronics.com © 2010 Tyco Electronics Ltd. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.tycoelectronics.com/definitions Part number 9-1440003-0 1461352-2 1461353-2 1721768-2 9-1440003-8 9-1440003-2 1440004 9-1440003-3 1461350-5 1721767-5 1721766-5 1461352-5 1461353-5 1721768-5 1440004-1 9-1440003-5 1461350-6 1461351-6 1461352-6 1461353-6 1721768-6 1461410-2 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3