General Purpose
Low Power PCB Relays
OEG
Slimline PCB Relay PCN
n 1
pole 3 A, 1 form A (NO) contact
5mm wide
n 3A switching current, load range 1mA up to 5A
n Sensitive coil 120mW
n Allows high function-/packing density
n Cadmium-free contacts
n Z type with reinforced insulation
n RoHS compliant (Directive 2002/95/EC)
n Haz. Loc. Version available
Typical applications
PLC, temperature control, I/O modules.
n Only
Approvals
Z
Coil Data
VDE REG.-Nr.40001589, UL E82292, CQC 08001026045
Technical data of approved types on request.
Contact Data
Contact arrangement
1 from A (NO)
Rated voltage
250VAC/30VDC
Max. switching voltage
277VAC/125VDC
Rated current
3A/5A
Limiting continuous current
3A/5A
Breaking capacity max.
750VA (3A), 1250VA(5A)
Contact material
AgNi, gold plated
Contact style
bifurcated contact
Min. recommended contact load (reference) 5VDC,100mA
Initial contact resistance
30mΩ at 100mA, 6VDC
Frequency of operation, with/without load
10/300min-1
Electrical endurance
3A, 250VAC, resistive, +70°C
100x103 ops.
5A, 250VAC, resistive, +85°C
30x103 ops.
Contact ratings
Load
Cycles
IEC 61810
3A,250VAC, cosφ=1, +70°C
100x103
3A/30VDC, L/R=0ms, +70°C
100x103
5A, 250VAC, cosφ=1, +85°C
30x103
5A 30VDC, L/R=0ms, +85°C
70x103
UL 508
3A, 250VAC, resistive, +25°C
100x103
Pilot duty, B300, +25°C
6x103
Pilot duty, R300, +25°C
6x103
9A LRA, 1.5A FLA, 240VAC, +45°C
30x103
Coil voltage range
3 to 24VDC
Operative range, IEC 61810
1
Coil insulation system according UL
Class A
Class F type available upon request
Standard D coil version (120mW), DC coil
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10%
mW
03
3
2.1
0.3
75
120
04
4.5
3.15
0.45
169
120
05 5 3.5 0.5 208 120
06 6 4.2 0.6 300 120
09 9 6.3 0.9 675 120
12
12
8.4
1.2
1200
120
18
18
12.6
1.8
2700
120
23 23.5 16.45 2.35
4602 120
24 24 16.8 2.4 4800 120
Standard L coil version (100mW), DC coil
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10%
mW
03
3
2.1
0.3
90
100
04
4.5
3.15
0.45
202
100
05 5 3.5 0.5 250 100
06 6 4.2 0.6 360 100
09 9 6.3 0.9 810 100
12
12
8.4
1.2
1440
100
18
18
12.6
1.8
3240
100
23 23.5 16.45 2.35
5522 100
24 24 16.8 2.4 5760 100
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Mechanical endurance, DC coil
08-2020, Rev. 0820
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
>10x106 operations
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
1
General Purpose
Low Power PCB Relays
OEG
Slimline PCB Relay PCN (Continued)
Insulation Data
Initial dielectric strength
between open contacts
750Vrms
between contact and coil
3000Vrms
Initial surge withstand voltage
between contact and coil
4000V
Clearance/creepage
between contact and coil
>3.5mm
Tracking index of relay base
PTI600
PCB layout / terminal assignment
Bottom view on solder pins
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-40 to 85°C
Category of environmental protection
IEC 61810
RTIII - wash tight
Vibration resistance (functional)
10 to 55Hz, 1.5mm
Vibration resistance (destructive)
10 to 55Hz, 1.5mm
Shock resistance (functional)
IEC 60068-2-27 (half sine)
min. 98m/s2, 11ms
Shock resistance (destructive)
min. 980m/s2, 6ms
Terminal type
PCB-THT
Resistance to soldering heat THT
IEC 60068-2-20
260°C/5s
Packaging/unit
box/2000 pcs.
Product code structure
Typical product code
Dimensions
PCN 1 05 D 3 M H Z ,001
Type
PCN Small Slim Power PCB Relay PCN
Number of poles
1 1pole
Coil
Coil code: please refer to coil versions table (e.g. 05=5VDC)
Coil version
D standard 120mW
L
high sensitivity 100mW
Contact material
3 AgNi
Contact arrangement
M 1 form A, 1 NO contact
Enclosure
H RTIII - wash tight
Insulation
Z Reinforced insulation (tracking resistance of relay base, case PTI 600)
Version
00000 3A model
00100 5A model
-EX1 according to IEC60079-15 = 2010
Product code
PCN-105D3MHZ,000
PCN-106D3MHZ,000
PCN-112D3MHZ,000
PCN-124D3MHZ,000
PCN-124D3MHZ,001
PCN-112D3MZ-EX1,00400
Contact
1-pole
Coil voltage
5VDC
6VDC
12VDC
24VDC
Coil
120mW
Cont. material
AgNi
Enclosure
RTIII - wash tight
Rating
3A
5A
12VDC
Part number
3-1461491-0
3-1461491-1
3-1461491-3
3-1461491-6
3-1461491-8 All
2071520-1
Note: This list represents the most common types and does not show all variants covered by this datasheet, other types on request.
2
08-2020, Rev. 0820
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
