PD10A335

28-1800 Vdc  Kilovac PD10 Make & Break Load Switching Features: • Excellent for control applications • PCB and panel mountings • Rugged design for the most demanding applications, including seismic shock • Small size and weight • Low power consumption • No heat sinks required • Vacuum-sealed; can operate in explosive and harsh environments • 2000V isolation across open contacts • Meets requirements of SAE ARD 50031 • Vacuum dielectric for power switching Panel Mount Version shown above is applicable to both PD5 and PD10. For PD10, the two power terminals are .064" (1.63) diameter. Refer to PD5 for PCB Mount Dimensions. CONTACT RATINGS* ESTIMATED SHORT TERM CURRENT Current (Amps) Duration(Sec.) 140 100 28 60 150 10 200 1 600 * Based on extrapolated data. Since each application is unique, user is encouraged to verify rating in actual application. The load terminals should always be connected as follows: Common Contact (A2) positive; Other Contact negative. Part Number COIL DATA PRODUCT SPECIFICATIONS UNIT Nominal, Volts dc 12 24 125 Unit Maximum Coil Voltage 14 28 130 Vdc P** Pickup, Max. @ 85oC 8 16 80 Hold, Min. @ 85oC 3.3 10 33 Drop-Out, Min. @ -40 C .5 1 Coil Resistance (±10%) 70 290 Contact Arrangement .......................................................... PD10A PD10B PD10P SPST-NO SPST-NC SPST-Latching Contact Form ........................................................................ A** B** Rated Resistive Load @ 320 Vdc ....................................... A 10 10 30 Continuous Current Carry, Max. @ 85oC ........................... A 15 15 10 Overload @ 320 Vdc (make/break) .................................... A 20 20 20 Life, (Mechanical/Rated Load) ........................................... cycles 500k/10k 500k/10k 7,000 Contact Resistance, Max., end of life ................................ ohms 0.010 0.010 0.030 o Ratings listed are for 25oC, sea level conditions PART NUMBER SELECTION Dielectric at Sea Level ......................................................... Power Terminals to Coil & all other points ................. Vrms 1,800 1,800 2,000 Shock, 11ms 1/2 Sine (peak) ............................................. G's Peak 25 25 25 Vibration, Sinusoidal (55-2000 Hz, peak) ......................... G's 5 5 5 C -40 to +85 -40 to +85 -35 to +65 Operate Time, Max., including Bounce @ 25oC ............... ms 10 10 6 Release Time, Max., including Bounce @ 25oC .............. ms 10 10 6 Operating Ambient Temperature Range ............................ o Insulation Resistance @ 500 Vdc, Min. ............................ Initial/ End of Life ........................................................... Mohm 100/50 100/50 100/50 Weight, Nominal .................................................................. g (lb) 71(.156) 71(.156) 71(.156) ** 13 Contact factory for the availability of other contact forms CII Technologies / P.O. Box 4422 / Santa Barbara, CA 93140 / ph 805.684.4560 / fax 805.684.9679 5 4700 Ohms A A Sample Part No. PD10 Contact Form A = SPST-NO B = SPST-NC P = SPST-Latching Coil Voltage 2 = 12 Vdc, PCB Version 3 = 24 Vdc, PCB Version 5 = 125 Vdc, PCB Version A = 12 Vdc, Panel Mount Version B = 24 Vdc, Panel Mount Version C = 125 Vdc, Panel Mount Version Power Terminals 3 = PCB Solder Connection 5 = Stud Terminal, Panel Mount Mounting 5 = PCB Mount 7 = Panel Mount / 5 7 e-mail info@kilovac.com / website www.ciitech.com