PE015012

General Purpose Relays PCB Relays SCHRACK Miniature PCB Relay PE n 1 pole 5 A, 1 form C (CO) or 6A, 1 form A (NO) contact contacts n Sensitive coil 200mW n Ambient temperature 85°C n Low height 10.0mm n Plastic materials according to IEC 60335-1 (domestic appliances) n Cadmium-free Typical applications Industrial electronics, white goods, measurement and control F0169-C Z Approvals Mechanical endurance, DC coil VDE Cert. No. 40011901, UL E214025 Technical data of approved types on request Coil Data Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 5A (CO - types) 6A (NO - types) Breaking capacity max. 1250VA (CO - types) 1500VA (NO - types) Contact material AgNi 90/10, AgSnO2 Frequency of operation with/without load 360/72000 ops/h Operate/release time typ. 8/8ms Bounce time, form A/form B typ. 4/6ms Contact ratings Type Contact IEC 61810 PE013 C (CO) PE014/PE015 C (CO) PE014 A (NO) PE015 A (NO) PE034 A (NO) UL 508 PE013 C (CO) PE014/PE015 C (CO) PE014 A (NO) PE034 A (NO) PE514 C (CO) Load Coil voltage range Operative range, IEC 61810 >15x106 operations. 5 to 48 VDC 2 Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 3 3 2.25 0.3 45 200 5 5 3.8 0.5 125 200 6 6 4.5 0.6 172 209 9 9 6.8 0.9 405 200 12 12 9.0 1.2 685 210 24 24 18.0 2.4 2725 211 48 48 36.0 4.8 10970 210 Cycles 5A, 250VAC, cosφ=1, 85°C 5A, 250VAC, cosφ=1, 85°C 5A, 30VDC, 0ms, 85°C 1,5A, 30VDC, 900/h, 50% DF 6A, 250VAC, cosφ=1, 70°C 30x103 100x103 100x103 100x103 50x103 5A, 240VAC, resistive, 85°C 5A, 250VAC, resistive, 85°C 5A, 30VDC, resistive, 85°C 6A, 250VAC, resistive, 70°C 5A, 250VAC, resistive, 85°C 30x103 100x103 100x103 100x103 10x103 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Insulation Data Initial dielectric strength between open contacts 1000Vrms between contact and coil 4000Vrms Initial insulation resistance open contact circuit >10x109Ω coil-contact circuit >10x109Ω Clearance/creepage between contact and coil ≥3.2/4mm Material group of insulation parts IIIa 01-2017, Rev. 0117 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Miniature PCB Relay PE (Continued) Tracking index of relay base PTI250V PCB layout / terminal assignment Bottom view on solder pins Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire according EN60335, par.30 Ambient temperature -40 to 85°C Category of environmental protection, IEC 61810 RTII - flux proof RTIII - wash tight Vibration resistance (functional), form A/form B >15/5g Shock resistance (destructive) >100g Shock resistance (functional/ 11ms), formA/form B >15/5g 1 form C (CO) version S0176-BA Terminal type PCB-THT Weight 5g Resistance to soldering heat THT IEC 60068-2-20 260°C/10s (flux proof version) IEC 60068-2-20 260°C/5s (wash tight version) Packaging/unit tube/25 pcs., box/500 pcs. S0176-BB 1 form A (NO) version Dimensions S0271-AA S0176-BC S0176-BD Product code structure Type PE Miniature PCB Relay PE Version 0 Flux proof 5 Contact arrangement 1 1 form C (CO) contact 3 Contact material 4 AgNi ​90/10 3 Coil Coil code: please refer to coil versions table Product code PE013012 PE014005 PE014006 PE014012 PE014024 PE014048 PE015012 PE015024 PE034005 PE034006 PE034012 PE034024 PE034048 PE514012 PE514024 Version flux proof Wash tight 1 form A (NO) contact AgSnO2 Contacts 1 form C 1 CO contact 1 form A 1 NO contact wash tight 1 form C 1CO contact PE515005 2 01-2017, Rev. 0117 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company PE 0 1 4 012 Typical product code Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 5 AgNi ​90/10 gold plated Contact material AgSnO2 AgNi ​90/10 AgNi ​90/10 gold plated AgNi ​90/10 AgNi90/10 AgNi90/10 gold plated Coil Part number 5VDC 7-1415542-8 12VDC 5VDC 6VDC 12VDC 24VDC 48VDC 12VDC 24VDC 5VDC 6VDC 12VDC 24VDC 48VDC 12VDC 24VDC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 7-1415539-4 1393219-3 1393219-4 1393219-6 1-1393219-0 1-1393219-3 1-1393219-4 1-1393219-5 4-1415535-6 4-1415535-7 4-1415535-9 5-1415535-1 5-1415535-2 2-1393219-0 2-1393219-2 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.