PPT-35DF-9

TECHNICAL DATASHEET Doc. No: TTDS 196 Rev1 Tyco Electronics PPT PPT self-adhesive, thermal transfer printable, destructible labels. Label material Top coated, destructible polyethylene, white Adhesive Permanent pressure sensitive rubber Liner Glassine Thickness: Label 0.05 mm ±10% Liner 0.028 mm ±10% ASTM D3652 0.056mm ±10% Peel Adhesion Stainless steel Service Temperature -40ºC to +80 ºC Minimum application temperature 10 ºC Print permanence Dry rub 70 cycles Storage stability 2 years at 21°C and 50% RH Use Indoor use only Printability Thermal transfer Tyco Electronics idento GmbH Paul-Ehrlich-Straße 23 D-63322 Rödermark Tel.: 06074/8908-0 Film fractures during adhesion testing Tyco Electronics Idento ZI de Comboire - 1 rue des Montagnes de Lans F-38130 Echirolles Phone: +33 (0) 476 099 696 SAE-AS-81531 Author: M Priddle Print date: 29-Jun-10 Updated: Page: 1 of 1 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.